Thank you for summarizing the common issues and fixes with the G2 that people are encountering in the extended launch period. I would have expected this from HP, but I am glad you are providing their tech support. You are an asset to the VR community!

MRTV you are the best; thanks for your hard work and dedication to VR!

This is a great video. Your German efficiency and attention to detail is greatly appreciated. Thank you sir. 🍺

Mine arrived finally from Bestware today. Excellent comprehensive troubleshooting video Seb thank you! VR Cover incoming.

@mixedrealityTV

3 жыл бұрын

Great! How do you like it so far?

Let me just say.... youre amazing. I was ready to go to the store with warrantee and have them repair my left speaker because it was making a crackling sound if i moved it, or if there was a lot of bass in the sound (like in music). I watched your video and saw how to properly reseat the contact pins (I already knew how to unscrew the speaker, but i didnt see how to properly fasten them carefully) and it fixed my issue. just.... bravo. thank you for all your help, i was getting really nervous about having to send it back to the manufacturer and wait for a month or so to get any possible fix.

Thanks for all the super useful information!! Much appreciated.

Oh god thanks you saved my day with this! I was already crying in frustration over the sound especially during beat saber

Just returned mine after it worked for 20 minutes but then getting an unfixable 1-4 error. Was so bummed out after watching Seb's great videos, I was so excited. After 3 days of trouble shooting and doing everything recommended I finally gave up. There are tons of people having problems and theres no way a product this finicky should have ever shipped.

Bingo! Computer didn’t see the device. Turned out the connector wasn’t plugged in all the way. Doh. Pushed it in all the way an we’re in business. Liked and subscribed.

This was suuuuper helpful and clear. Thank you very much for your help.

No way!!! Your an actual legend. I couldn’t get it to work and I have a b550 motherboard. What I did to fix the issue was to turn the stuff mentioned in the video to 3.0 instead of auto and also plugged the headset into a powered USB hub. So glad it works!!!!!

@mixedrealityTV

3 жыл бұрын

Glad I could help you!

Great video man. Ran into some audio issues and this helped a lot

@wolv3y252

2 жыл бұрын

Was yours switching back and forth too? It’s so frustrating cause it just swaps randomly when I’m trying talking to my friends in VrChat and I end up missing half of what they say! Hopefully this solves my issue.

Yes - I am still waiting, but thankfully this help exists and I have some place to look when I run into issues

@colnicol

3 жыл бұрын

I’ve got the same graphics card, it won’t recognise the g2’s

The troubleshootinng guide mentions a stiff connector to the headset. Man, they aren't kidding. I had to really push on mine to get it to seat. Voila! Headset recognized. Thanks for this video and the links!

@T5473K9

3 жыл бұрын

THANK YOU! I didn't wanna shove it because I didn't want to break it!

@Maxaxik

2 жыл бұрын

I've gone through all the software fixes I could find before finding out that the dot on the connector needs to be flush with the edge of the headset. After wiggling it around a bit it finally connected. My headset that I ordered a few days ago didn't come with the new cable that's rumoured to be better, but it turns out it wasn't needed. I was ready to go get a usb hub next day lol

Very helpful and perfect tutorial Thank You solved my VR HP issue

Thanks very much for all your hard work very very helpful

This is a great reference. Thanks Sebastian! I got my G2 working 45 minutes before this video released. I had to do a clean windows install (WMR would not install on my Windows 10 Pro N build) and buy a powered USB hub for the X570 workaround. I had to do the frankenfov mod for it to fit my face right. (Great idea Sebastian and a big thanks!) Now I just love this headset. I have been playing Medal of Honor (Oculus version over Revive) and it looks and plays great! I ordered mine through Connection on 9/3 and it arrived 12/15.

@mixedrealityTV

3 жыл бұрын

Great! So glad I could provide value to you!! Enjoy the headset!

My G2 comes tomorrow....Finally! Very timely video, Thx Sab!

@pumpuppthevolume

3 жыл бұрын

so how is it

@DarthFlan

3 жыл бұрын

@@pumpuppthevolume Well I haven’t been home to even unboxed it yet LOL! But I’m hoping to this weekend!

@and324fsjsef

3 жыл бұрын

@@DarthFlan so how is it?

@DarthFlan

3 жыл бұрын

@@and324fsjsef clarity is spectacular and I just tried the FOV mid to get closer to the lens that definitely helps. Trying different positions on my head to dial in the sweet spot. Over all I’m impressed with it so far.

I got my G2 yesterday, worked for all of 3 hours :(. I have a 2080 with a USB C port and it worked perfectly at first. I played a few games and then decided I was going to get my knuckles controllers setup following your guide. I got everything working but then the audio on the G2 wasn't showing up. I unplugged it and plugged it back in and got a 7-14 error. Since then I've tried it on 3 other computers, all get the same exact error. Two of those computers are Intel and one is my Threadripper machine. I tried using the USB hub in my monitor per some G2 threads and no joy. If anyone is thinking of getting one of these and they have an AMD X570 motherboard, I'd say don't bother! It looked really nice, almost no glare and great clarity when it worked. I was super excited about it. After troubleshooting for 6 hours, watching these vids, going to the forums, discord channel, and HP Reverb site I have concluded that this headset is NOT ready for primetime. KZreadrs are getting better hardware than they are sending normal people. I can't explain how they all still have working headsets. There are literally 1000's of people having issues with them connecting, audio randomly dropping out, screens going black constantly. Error after error and nothing seems to fix it. I suspect my cable died after the 3 hours I used it. It shows up in device manager and it says it's working, but it's not, won't even light up. I'm beyond frustrated with this thing. Me and my son both use VR, I have 2 Valve Indexes, 2 HTC Vives, an Oculus Rift S and for a minute I had a Samsung Odyssey+. All of them just work, no issues almost ever and never anything serious if I do have an issue. Very disappointed with this headset and cannot recommend it to anyone until after they fix all the issues with it. Before you tell me stuff to try, I've already tried everything, at least twice! I have a powered USB hub coming tomorrow that will probably be the nail in the coffin because I don't expect it to fix anything. I saw one KZreadr have an issue and they sent him a new cable which fixed his problem. Hopefully I get the same satisfaction.

@robertmcmahon4549

3 жыл бұрын

A few are getting dodgy cables,the fact its so long doent help and im sure thats why so many are getting usb problems

First rate work Sebastian. Your videos are extremely valuable.

@mixedrealityTV

3 жыл бұрын

Glad you enjoy them!

Thank you for your videos! I have been trying to set my reverb g2 for a week now. All I get is an error code 15-4 when trying to set it up via Microsoft Mixed Reality. Does anyone have a hint on what to do? Thank you so much!

Thanks very much for this great video!

Good video, keep up the good work!

You're the man!! Plugged the g2 into an extra 3.0 usb port hub and my it came back on!! Wasted over an hour trying different things :///

Seb, your videos are always on point. Fantastic Job!!

Great video seb, I know most of this as I've watched all your videos already 😁unfortunately my issue is my audio is honestly far too quiet, I do have good hearing but even at full volume it feels like I'm playing at half volume, I've got my speakers and headset in the best position, I've removed the speakers and reattached them and checked all my sound settings but can't get it any louder, I know others who have had the same issue as me but most people say its really loud so dunno why mine is, could just be my setup, gonna keep looking into it but debating whether to go back to headphones but would be such a shame as I love the off ear audio

hi should you test the headset from someone like me who says that the sweetspot is ridiculously little and compare to your g2 please ? Cause i think there are some bad g2 and some good ones

I heard disabling steamVR reprojection improves performance for the G2, I guess I'll have to try both. Thanks for the controller binding tip.

@mixedrealityTV

3 жыл бұрын

You are welcome!

Hi I am unable to move in TestHMD/ROV_Test_Beta app (I have the latest 1.2 version). Do you have recommended controller mappings or are able to share a community mapping for it as you seem to have no problem using it. Thanks.

Is there any way to turn off that tunnel comfort vision setting off in the Windows Mixed Reality Home Portal?, it's kind of annoying, when turn around using the thumb sticks on the G2 controllers, the sides blur, some people use that setting if they have motion sickness in vr, I don't like that setting, its annoying and ruins the immersion when being in vr, is there any way to turn that setting off?, I'm about to put the G2 aside and set my Rift S back up to my PC

Great show.

Excellent 👍 Good tips and great vidéo as always 😉 Now I'm very excited to receive my G2 on january 😁 Continue like this. Bye.

Hi, since I connected te reverb g2 to my pc the pc is not turning off anymore if I want to shutdown the computer , if I remove the usb 3.0 first then is does.. strange... ever came across that?

Thanks for this video. There are still bugs I'm working out (on a Ryzen 5800X + RTX 3070 of all things!) especially the PCIE 4.0 support thing, but this helped out with a lot of the issues I had.

Dude. If I had watched this one video before I got it I would have run into zero issues. LOL thank you for this video.

I received my G2 today and at first, it worked great. However, after a couple of hours and me rebooting my PC, WMR starts automatically after logon showing me an error code 7-14 and how the headset couldn't be found. When looking at the breakout box, the white LED no longer is ON. Does this mean the breakout box is now broken only after a couple of hours usage?

Prior to the latest MSFS 2020 update, I had no issues with the HP G2 in VR. Now, after loading up the flight an enabling VR, the MSFS 2020 screen comes up and then goes back to the Windows Mixed Reality Screen. On the monitor, I get the VR image that’s continuously flickering. I’ve updated the drivers for my 1080TI GPU, re-installed WMR, adjusted the VR graphics settings with no success. No issues flying in VR with X-Plane 11 with the same headset. Any suggestions?

My x570 was the problem, thank you!

@joshuachorniak9566

3 жыл бұрын

Mine as well but it’s still not working. I switched everything to GEN3. No good. ☹️

Many thanks for that video ! Just received my Reverb G2 yesterday... after 4+2 months order delays and there it is... and it is not recongnized ! Hopefully you are there ! I've got high end motherboard MSI MEG UNIFY with a Ryzen 3950, BIOS is up to date 2021.01, all win10 updates are good, check all USB-C and USB-A 3.1 it is not working even with BIOS PCI gen3 setup... :-( now I just buying an USB 3.1 powered hub... hoping for the best... stay tuned tomorrow for the next episode ;-). What a mess for a product like this, I never imagine that !!! -> nop, it does not work at all even with the new USB 3.1 powered Hub... I'm locked and unable to contact HP support while support page turn in loop cannot register my serial number on the reverbg2 (not recognized) and bot chat didn't recognize hp reverb g2 option ! Awesome support web site !

@joshuachorniak9566

3 жыл бұрын

I’m in the same boat bud. Looking for help. Pretty depressing to learn how many things could go wrong.

Thanks! I finally got my G2 and held out to open it for Christmas. Out of the box it worked pretty well. I did have some very frustrating controller problems with not binding. Hopefully this resolves Elite Dangerous which doesn't to see the controller at all. If you could though... How do I reset my view??? This is something the Rift S easily did with 2 clicks. I cant seem to find it.

Settings: So why are we getting 2160x2160 at 100 % SteamVR SS on the G1 without anything looking distorted or not full res?

Hey Sebastian. Got a new HP Reverb G2. Controllers not working in SteamVR properly. The assignments are reports to be correct but there is a problem. Like they are rotated CW. left is north, right is south, up is left etc... in both controllers. No hardware issue. They are working correctly in cliff house. Changed custom settings in SteamVR but didn't help. Like it has no effect. Is it possible that you might have an idea?

Seb is a great ambassador for the VR community.

Hey man! Thanks for a good video. I have my g2 working with dcs but will not launch msfs, please help. Im running xrtool mrp, windows 10 updated. Dcs works fine. I have open version 40 Ann premium deluxe nsfs.

Speaking up before Ive finished the video. Skip the Windows MR app on Win 10 and use the HP Reverb G2 Set Up App on the Windows store. I was getting Error 7-14 on MR but the other one i just mentioned on Windows Store worked like a charm AND it rolls right in to MR App. Its the same thing in the end after Set Up.

Tha is Seb but I was really hoping you would help us out with custom controller bindings... In many cases there is no existing community bindings so im left trying to create my own and it's a minefield... It would be great if you could do a more detailed run down of how to create bindings when there is not a community one to choose?

can you link to the USB hub directly, and not an amazon search? It seems to be out of stock, and defaulting to AmazonBasics one.

Great timing on this video. I got mine recently and I was only having trouble with Boneworks controller bindings. For some reason, it won't let me pick the custom bindings option. The fix worked with The Walking Dead tho. Edit: Fixed. I went into the advanced settings and picked the show old bindings option.

I just got the new HP Reverb G2 but I'm having problems with the controllers. They show paired but not connected. When I press and hold the Windows button they power up and then in a few seconds they power back down. They never do connect. But yet they do show as paired. I have the X570 mother board and I tried the PCI-e to Gen 3 and it did nothing to fix the problem. And it's the only problem I have. Everything else works. And the sound is Awesome. I just can't get the bloody controller to connect. I am on Windows 10 with the latest updates installed. I"ve got Ryzen 7 with 64 GB of Ram. I'm just about ready to return these to amazon and I really don't want to. But if I can't get the controllers to work, what good is the VR Headset? I'm using the batteries that came with the controllers. Could that be an issue?

Please suggest how to connect HP Reverb G2 display cable to MSI GF65 (Having C-Port 2.0 not usable, but having HDMI) Graphics card is GTX 1660Ti, I brought DP port to HDMI connector but not supported. Please help

So i downloaded LIV for seeing twitch chat in game. i also switched to the rechargeable batteries in the description before I watched any of this. after i got LIV working. My rechargeable batteries were charged. ( I got them that day. ) I switched out my duracell batteries for the rechargeable one and after that point I kept having problems with my controllers not tracking. If I left the controllers for a short time sitting still they would sleep then when I moved them again the lights would be darker than normal and wouldn't be tracking. I would then have to restart windows mixed reality with the controllers off then start windows mixed reality and turn the controllers back on. Sometimes they would be bright and tracking, sometimes they would still be dark and not tracking. While they weren't tracking the controllers wouldn't even show up on my VR screen but the buttons could be pressed ( pressing the trigger would shoot my gun in half-life Alyx, pressing the windows button brought up the menu) Any thoughts on what could be causing this? Never had the issue until I switched out the batteries. I installed LIV shortly before that so I was thinking one of those is the main issue.

I just got my G2 today!!! Thanks for making these videos. Hopefully I don't have issues but it's good to know I have a good resource to turn to. I install the latest updates on Windows already. Looks like I need to get the 1.5V batteries and charger.

@wolv3y252

2 жыл бұрын

I’ve had my reverb for a little while now, and it’s been pretty difficult with audio bugs, afk issues, the works, but pretty good so far. How’s your experience?

I switch to the Reverb had a Rift before, but now my Skyrim game is REALLY dark even outside are the face almost black when there is no direct light, just switch the headset did not changed the game. Any advice?

One comment, my G2 was doing a weird skip every 3rd frame thing after windows update or nvidia driver update etc.. not sure but rolling back didnt fix anything. I also will note i had the vorpx driver installed and removed that as well. HP I concur has zero support for this product. The only thing they offered was "depot repair" and sent me a box to ship it in... Low and behold I reinstalled windows entirely with the latest service pack or whatever they call it these days and it fixed it. So depot repair would have just been a waste of time and gave them time to break my headset.. 3 issues: 1. MRTV, per your G2 with Valve index controllers I did the same thing and it works pretty well. However your other video doesnt show that the steam guardian shows up with the index controllers. Mine does not at all and i nearly punched through my game shelf while playing blade and sorcery. Any advice on this? Also would like to make the guardian better or somewhat like my rift s where i can actually see it when i break the barrier. 2. I do mirror audio so i can output to a projector and sound system when friends come over. On my rift it was 100% in sync. On the G2 theres nearly a second delay between what I hear on my headset vs the external speakers. I need to disable headset audio entirely as it has an insane echo and makes it unplayable. 3. Lastly The G2 while within steam cannot reset view so I am facing the correct way. It doesnt do anything and occasionally I open the software to find my controllers behind me and 10 feet below me along with the floor. Apologies for the long rant but I am sure after your index controller video many other people may have these issues that could use troubleshooting help. Thanks

I facing this issue where my controllers are not point straight in SteamVR games while it does well and true in WMR cliff house. is there a setting or calibration i can do to fix this? please help

So I'm experiencing an issue where my left controller says it's paired with my headset, but it wont track it. It tracks the right controller just fine, but not the left. also i noticed the lights on the left controller are dimmer. Any suggestions?

Nice video, i got g2 yesterday and i struggled all the day just to connect it and set it up. Now i finally managed to get it working but it crashes, a lot while playing pavlov or warthunder and have to re-plug the headset to let WMR sees it. I have r9 3950x and 3080 so it can't be a performance issue... pls help..

Stellar job. By far the most informative and pragmatic VR channel on the KZreads.

I am on X470 and I can only get my headset to connect properly through the USB-C port on my GPU. I verified the USB controller drivers and do not even have PCIe 4.0 so I think that it is more likely an issue with the chipset software. I have been having a crash almost every time I load in Half Life Alyx so I was hoping to use the motherboard port instead, in hopes that it will help.

Hello. My problem is that I can't see the youtube vr 360 videos and it stays on a black screen with 4 white dots rotating. Know why it could be. Thank you and regards

What would you guys recommend as an upgrade from the original vive? I already have index controllers so only need a headset

@wolv3y252

2 жыл бұрын

Have you already bought a headset? I would recommend buying something that’s base station tracked because pairing an inside out tracked headset (I’m using the reverb g2) with index controllers is an absolute pain in the butt. You’ll constantly have to re calibrate the controllers with the base stations, and the reverb g2 is not perfect (hence why I’m watching this video rn).

@TheJohn48231

2 жыл бұрын

@@wolv3y252 Yeah ended up buying an index. Im very happy with it, much better than the original HTC Vive I had previously.

@wolv3y252

2 жыл бұрын

@@TheJohn48231 good choice 👍

Has HP or AMD addressed any of the issues with B550 motherboards? I can barely ever get the headset to boot on, even after forcing PCIE to Gen 3 and even when it does work there’s no audio, windows does not recognize any audio devices on the headset. It’s ridiculous.

I will recieve my tommorow! =) cant wait

@pumpuppthevolume

3 жыл бұрын

how is it

Very interested video as always. MRTV do you know how decrease lcd panel brightnes in G2 like in standart monitor? Thx.

@MrPaulbaitson

3 жыл бұрын

Decreasing the monitor brightness has nothing to do with the HMD = (Head Mounted Display) dude, obviously, you weren't paying attention to Sebastian's video.

@fakel87

3 жыл бұрын

@@MrPaulbaitson thank you for your reaction) I mean brightness HMD of course.

@MrPaulbaitson

3 жыл бұрын

@@fakel87 Well Sebastian showed how to do it in the video.

@fakel87

3 жыл бұрын

@@MrPaulbaitson oh shit really?! Thank you man I will watch it again with subtitles and dictionary))

@MrPaulbaitson

3 жыл бұрын

@@fakel87 Thanks for making me smile :)

I have MSI Z490 GAMING PLUS Motherboard and Mixed Reality Portal says my PC doesn't support USB 3.0. I've tried every USB port and no luck....

@dnoncent

3 жыл бұрын

Same issue here with my Z490 Mobo and an RTX 2070 Super. Nothing works. I might have to return mine.

Have had the Reverb G1 for 12 months and just got my G2 a few days ago. The G1 is better "HANDS DOWN". No one has mentioned this but the G2 has less depth of Field. this is huge in sim racing!

How to record a full screen , mirrored and not goggle affect when wearing the G2 and flying the MS flight ?

My IPD is changing itself when I move my head faster or take off and on my HP Reverb G2. Is it happening to you as well?

@mixedrealityTV

3 жыл бұрын

No, not happening to me.

@pumpuppthevolume

3 жыл бұрын

a piece of tape for the slider might help if it's that loose

Great video Sebastian, I would think it was exhausting to make? A brand new HMD with so many issues doe's not bode well for HP's HMD future! and I've never had an issue with their PC's and I've one over 14 years old 32bit still working with a new HDD.

I start the reverb g2 vr and it plays normally. However, as soon as I put it on, the icon disappears from both the screen and the vr. I have to go to the virtual desktop to restore it

Its worth waiting for!

@mixedrealityTV

3 жыл бұрын

It is!

In some Games like Pavlov i can't grab weapons from the floor with my G2? I tried many times to adjust the height of the floor. Still not working. Do i have to adjust my height? How can i fix that?

@dreadnaught7995

3 жыл бұрын

Yes me too and even in half life alex I cant reach the ground to pick things up

Is thunderbolt 4 compatible with Reverb G2

Got my shipping notification. Should get it next Tuesday. I have to say, im pretty nervous. This thing better work and not give me problems.

@thelektryk

3 жыл бұрын

If my best friend ask me this question I would reply: man, cancel it. You see all the issues: 15 minutes then sound cut off, no sound, small sweet spot, always blurry sides and more. HP has shown us G1 failure and they made step two called G2 failure. Cancel and make sure they 'll start shipping fixed units then buy if it' s 100% alright. Otherwise you'll stack with faulty units and users reported HP and sellers don't have customer service. But you know - your choice. Let me know what's your choice

@OhItsThat

3 жыл бұрын

@@thelektryk When did you get yours? Are you having all the issues?

@thelektryk

3 жыл бұрын

@@OhItsThat I was beating myself with thoughts. Quest 2 or G2. Didn't know which one I should buy but considering how awesome it suppose to be with G2, according to MRTV, I was leaning towards G2. I almost completed buying process, but I knew I'll need Rtx 3070, so in the end, luckily, I didn't buy either (Q2 or G2). To make my waiting time for Rtx better I pre ordered CP2077. Now I see broken promises in both products. Reviewers lied about CP2077 and I think it's very much the same about Reverb G2, isn't MRTV?

Sometimes when I start windows mixed reality and it says look both ways then down the display will move and slant down to the right. I have to quit mixed reality repeatedly as it remembers the setting and most of the time restart my pc until it finally gives me a level display. After that it works fine but this happens quite a lot. I play in a seated position because of a handicap. Just today it started losing the volume then regaining it. It would show a speaker with an x then when it came back it would show the volume. Sometimes it would be every few seconds and others every few minutes. It also started saying there was a problem running at 90 fps and suggested 60. It also started saying it couldn't find it. I've had the reverb G2 for about 4 months. All these things except for the slanting to the right started today. Everything has the latest updates. I've tried different usb ports and even a powered USB hub. I will try all of your suggestions tomorrow to see if it improves. Do you know anything about the slant? Any help would be most appreciated.

@mcfar538

3 жыл бұрын

Also, it started giving me a black screen for a few seconds, one side black or the display flickering. Take your pick they all happen intermittently. Help???

Hi Sebastian. Love your videos. I have an idea for a new G2 video for you. Many of us DCS players groan with its poor GPU optimisation and lack of Vulkan rendering support, so we end up having to pay out a huge amount on high end GPU cards to match high end headsets because of this. I haven't seen ANY GPU benchmarks comparing different nvidia GPUs - this would be really useful to see how different GPU's affect DCS framerate on the HP Reverb G2, and this will really help prospective buyers, e.g. going from something like an old1050Ti all the way up to a 3090 - with the same native resolution settings obviously! I appreciate it might take you some time swapping out cards! But it would be great. Keep up the brilliant work, You've helped me choose the best visual headset 3 times now over the years, Odyssey, Reverb Pro(G1) and now the G2. Thanks!

@derekcfoley

3 жыл бұрын

oops corrected it to say "I haven't seen ANY GPU benchmarks comparing different nvidia GPUs" - Hopefully you got what I meant!

Hi Sebastian. There are a lot of reports now about the small sweetspot and brutal sharpness falloff in the G2. Some say it might have to do with foveated rendering if the GPU is not enough. Is this something you are aware of? Or did HP send a batch with bad lenses? My headset is sharp in maybe 15-20% of the image, everything else is a blurry mess. I run it on 1080ti. Not the latest but no slouch either...

@speedofsilence

3 жыл бұрын

1080ti here too, its not the gpu's fault. The vr cover is way to thick. Pull the cover off and try to get your eyes as close as u can get them to the linses. In my case fov and sweetspot increased by a ridicolous amount. From this moment I am playing with cover completely off. I will make a comfy nose cover by myself till they realease a official ultra slim one. Let me know if it works.

@henrikbengtsson3566

3 жыл бұрын

@@speedofsilence Thanks, tried that. FOV gets bigger for sure, but the small sweetspot and sharpness falloff is more or less the same. Maybe a tad better but that doesn't say much

@speedofsilence

3 жыл бұрын

@@henrikbengtsson3566 hm strange, sorry to hear that. It works very well for me. Guess this is really individual.

Hey Sebastian, I'm completely new to VR and recieved my G2 a few weeks ago. First of all, it is absolutely amazing. Even on my laptop with a 2070 Super MaxQ GPU. What program do you use to show the framerate/super sampling stats while in game? Also, I've been trying to use mods with Skyrim VR but can't seem to get them to work. Basically, the mods change the controller bindings and i can't figure out which any community bindings to use to get the game to work correctly. If you get around to modding your Skyrim, could you possibly post a video showing the mods that you end up using and how you get the controllers to work correctly? Thanks for all of the content. Keep it coming!!

@kwlook90

3 жыл бұрын

Get fpsVR from Steam. It's cheap and I use it a lot especially because I mod SkyrimVR (a lot). I'm not an expert but it's a good tool to have. You'll have to go into steam settings and switch to oculus bindings or download them from VRIK mod page and install them (I recommend installing that mod because it's really cool). After you have oculus bindings you may have to go into the VRIK MCM and swap X and Y buttons. You may have to go into the the steam binding settings and edit the bindings so the X button as the Oculus B button otherwise you won't be able to drop things from your inventory. No matter what you'll have to experiment with buttons to find out what they do... or not. Here's the reddit post I used to fix my binding issues. It leaves out the x button part. If the x and y buttons don't work right after that swap the buttons back. old.reddit.com/r/skyrimvr/comments/jrgwa4/hp_reverb_g2_arrived_today_need_hep_with/ I'm not great with instructions but I want to at least put you on the path. Definitely get into the SkyrimVR reddit as there's tons of info there and it's a great community. Look up Cangar for mod instructional vids. This video got me started with modding SkyrimVR I recommend it with his other vids. kzread.info/dash/bejne/oJeG1dBwoquxZbQ.html I hope this helps you.

@briangilligan9628

3 жыл бұрын

@@kwlook90 Thanks! I really appreciate the help and will try this out as soon as I am able. I did try the VRIK mod with the oculus bindings but couldn't seem to get it to work right (never swapped the x and y buttons). Hopefully following these instructions will work out. Thanks again!

thank *YOU*

I have got a problem of reverb showing only gray in HMD not black but grey im trying to find help but cannot, im about to reset the whole headset\computor ,smetimes it ok but mst of the time i have this issue

I'm using Duracell 1.2v 2500 mAh rechargeable batteries they work fine. I've used these with Oculus and the HP Reverb Pro (1) and now with the G2.

I did a fresh full new Windows install, with all updates, and I couldn't get past connect your headset. I read something about hololens device. I uninstalled this driver then installed it again, then the headset was found.

Der Link geht bei mir nicht zu einem konkreten Produkt. Ausverkauft? Alternativen?

My windows is updated to the latest version but when I run the mixed reality portal, it just says installing drivers forever. I literally left my pc running overnight and the drivers wouldn't install.

Is it only a few games that don't have bindings?

WMR doesn't work with OpenXR APPS my G2 Reverb cant Visit Steam Home ! Iam really confused, Yesterday it was working ! can you help me ? SEB

Headset cable connection was tricky, was the only issue when not recognized . Gotta really get it in there👍

@maxmartin4125

3 жыл бұрын

haved tried every configurations mentioned on vid and still nothing happened.Bit frustrating

I am noticing a problem in my reverb g2 which is that the “focus sweet spot” is very small, much worse than valve index. Am I doing something wrong or is it normal?

@speedofsilence

3 жыл бұрын

Same here. Ir's the original cover's fault. My fov and sweetspot is very tiny. It' s the distance from eyes to lenses, so it also depends by head's anatomy. So if you are not wearing glasses, try with cover completely off. You will be amazed. A good thin cover mod should do it, but at the moment there aren't any except the odysee cover.

@Johnny_Thunder

3 жыл бұрын

Sweet spot is worse than G1, many G1 users are returning the G2. Mrtv pretends G2 sweet spot is better lol

@boston19801

3 жыл бұрын

@@speedofsilence Thanks man for info and the tip, i am experimenting with it and maybe i will wait for the final modded face gasket.

@speedofsilence

3 жыл бұрын

@@boston19801 I am gonna do the mrtv frankenfov mod. Just only the velcro tape and the ultrathin 6mm htc vive foam replacement from vrcover.

Apparently, windows creates extra virtual monitors by default when you plug in the set. It's quite a big performance hit. Found a video yesterday that fixes this and depending on your system can make a huge difference. kzread.info/dash/bejne/anxk26aeltHXfaQ.html Maybe MRTV can make a separate video about this. Should help out a lot of people.

I have two problems: 1. Tracking likes to jump around when I try to aim at far targets in games like Arizona Sunshine 2. Sometimes the lenses will go dark (one after another, for a few seconds, and then come back). Only in some games (like Arizona Sunshine, but never in Alyx). Any ideas?

@andreperkowski2082

3 жыл бұрын

USB issues

The Mixed Reality Portal Screen keeps disappearing so can't even get set up Any ideas

i get a usb error code that says make sure your plugged into a 3.0 usb.. and it is, and it's a powered USB hub.. and its still giving me an error on my older computer.. lame

Switching to Gen3 PCI Express wouldn't be possible for me. Since I'm using Gen 4 M.2 ssd drives.

Hey, I came with updates. So in BIOS I changed PCIE 4.0 on 3.0 and it helped me to launch the headset, but still I had some problems with sound and image with black artefacts. After I bought a PCIe card @t it solved my problem and now my H2 works well. Thank you for your help.

Knocking the bios back to PCIE 3.0 sure helped with the audio problem but did not completley stop it but it sure helped.

I'm getting that Low Battery Issues on my right controller. The fix seems to be to take it apart and clean the eletrical contacts inside the controller itself? Anyone here have experience with that or can point me to a good walkthrough?

I have an error code 7-14, connected once and has not since we opened the box. Any suggestions? All updates were made.

@alfie8472

3 жыл бұрын

try plugging it into a different computer. Mine works on one computer but not another. Also, make sure all your drivers are up to date. Also make sure the connector to the headset is fully pushed in, you need to hear a click. Also switch PCIE to Gen 3 in bios if it isn't set to Gen 3.

Sebastian i have Asus x570-e motherboard have issues with usb ports. What do you think AMD or HP will make an update to resolve this PCI-E 4.0 problem?

@turnpike9680

3 жыл бұрын

I have the X570-F and I had to put it on a USBA 3.1 port to get it to even install. Still getting blackouts from time to time though, but I've only been tinkering with it for an hour.

@olivertoth5282

3 жыл бұрын

@@turnpike9680 I soldved the problem atm. Set back the motherboard to pci-e 3.0 in bios, atm the headset is very stable, i played with it 3-4 hours continuously. But only 1 usb port recognize the headset. No more audio jumping. All is stable. I hope it will be in the future. Asus rog x570-e, 3950x, ROG 5700xt, updated bios, windows update, usb ports update.

@turnpike9680

3 жыл бұрын

I thought I'd have to do that, but the blackouts seemed to stop whenever I dropped resolution around the board. Played Flight Simulator 2020 on VR for two hours straight yesterday with PCIE 4.0 still enabled with no blackouts at all. I'm still gonna try the powered USB hub trick since I don't have any slots left for PCIE hubs and I don't wanna downgrade my PCIE generation since that's one of things that sold me on the X570. Should mention I'm running a 5800X with a 3070 with all four ports used (three monitors + headset). Dunno if any of that is helping but it's been relatively smooth so far. I get a 20FPS drop when loading lots of scenery, but it generally resolved itself quickly enough for me to not notice much.

@turnpike9680

3 жыл бұрын

Either way, this is the second headset I've had power draw issues with two headsets now - motherboard manufacturers really need to release a PSU-backed USB port for VR users.

I could not find a usb-c to usb-a in the Reverb G2 box. Does it really come with one? Mine only seemed to come with a displayport to mini-displayport adapter.

@pawelkrupowicz2539

3 жыл бұрын

Yes, it comes with one. Mine had it.

@npirzkal

3 жыл бұрын

@@pawelkrupowicz2539 Weird. Mine did not come with it :-( Do you remember where it was in the box?

@pawelkrupowicz2539

3 жыл бұрын

@@npirzkal In a small sealed bag, together with other cables.

Hello Sebastian, I come from Spain, and i have a problem with my controller when use my protube, when push my left controlen and strong, lose it tracking, and i can not see my controller, it is not occlusion, it is because of the strike with the protube. Help please. I am sorry for my english😜