Revell 1/48 I Bristol Beaufighter TF.MkX I Full Video Build I
This is a full build video of Revell's mighty Bristol Beaufighter.
This 'Beau is NE429 of 489 (RNZAF) Squadron RAF. This was a New Zealand squadron which was part of the RAF Coastal Command. Kiwi Beaufighters were mainly armed with torpedos hence the kick name "Torbeau".
Not an easy kit this one. Landing gear especially was tedious as it doesn't fit well at all. Wings as well are tricky to say the least. It does turn out well but "check your references", Beaufighters are notorious for their differences.
The Xtended podcast really helped trying to work what did what...
RAF, RAAF, and RCAF Beau's are armed with rockets and wing guns, where as RNZAF Beau's
are the torpedo Beaufighters... generally… but this is does vary! Nightmare!
#bigbritishbirds #coastalcommand
Xtended podcast:
aviation-xtended.co.uk/
Xtended Facebook:
/ aviationxtended
BAIS:
/ 1185462564870290
My own modelling Facebook page:
/ joesdad1
Thank you for watching.
Пікірлер: 59
I built that same Revell kit loved it, she was an excellent build.
Nice to see builds again Tim
A masterclass. Superb
An awesome build, excellent podcast recommendation and cool build music. Great stuff 👍🍺
@TimsScaleModelling
2 жыл бұрын
Well done Otto 👍👍
Hey Tim.... had this in my 'watch later' since last year and just got around to watching it this afternoon. One of your best builds and videos to date. great editing and choice of music. Lighting 'spot-on' aswell. Because of this build, I've dragged my old Tamiya kit to the bench (kicking and screaming) which I could (also) do as this same machine or possibly in SEAC colours. Take care matey, see you on FB very soon.
Brilliantly done Tim
@TimsScaleModelling
2 жыл бұрын
Thank you very much Dherm
Stunning as usual Tim ❤️🏆👍🍻
Excellent build.!!!! Fantastic video.!!!! BRAVO!!!!!!!!!!!!!
I built this kit last year, Tim, and found the same issues as yourself; the wings didn't fit well and the landing gear was a real nightmare, as it was poorly-fitting and very weak. Initially I really enjoyed it, but as soon as the fuselage was closed up it fought me all the way. That said, it looks very good and I was pleased with the end result - I just wouldn't recommend it to anyone who wasn't prepared to spend a lot of time fettling it to get everything to fit. It's good to see that your efforts turned out so well.
@TimsScaleModelling
2 жыл бұрын
That Jack, pretty much sums it all up! The Tamiya Beau is a much better experience, I think I need to build one just to cleanse the soul… thanks mate
@JackRoadkill
2 жыл бұрын
@@TimsScaleModelling I have a Tamiya Beau in my stash, and just need to get around to building it (and giving it some liposuction on the rear fuselage!).
@TimsScaleModelling
2 жыл бұрын
I’ve got two to get through. Definitely gonna do an Aussie Beau, I’m kinda waiting for someone to come up with accurate Aussie colours.
@JackRoadkill
2 жыл бұрын
@@TimsScaleModelling Do you use enamels at all? If so, ColourCoats are my favourite paint. Their accuracy is spot-on.
@TimsScaleModelling
2 жыл бұрын
No Jack I don’t use enamels, haven’t for years. It’s lacquers all the way for me..
It is way, way, way more accurate than the Tamiya kit... The rear fuselage depth is massively shallower than Tamiya, and Tamiya is wrong, while Revell is correct. Worse still for Tamiya, its canopy cross section is bulged and unfixable, Revell again is dead on, with flat unbulged sides. Wing airfoil shape also was superior on the Revell. Landing gear and underwing stores are complicated items: Maybe Tamiya has a few nicer details there, hard to say, so it might still provide a few useful parts for the much better Revell kit. Very nice work on the panel shading by the way.
Lovely result, Tim 👍
@TimsScaleModelling
2 жыл бұрын
Cheers Sprue, thanks for stopping by mate
Lovely job, Tim.....another beaut video build and testament to your skill as a model builder and a YT presenter. There were obvious issues with this kit but you definitely overcame them and created a terrific looking aircraft.
@TimsScaleModelling
2 жыл бұрын
That’s great Robbo ta mate… humbled*
Great work Tim.
@TimsScaleModelling
2 жыл бұрын
Thank yer Deano
Excellent 👍
Another impressive looking model Tim. Well worth getting the Look upgrades for the cockpit
@TimsScaleModelling
2 жыл бұрын
Definitely Dave, even if it can’t really be seen! 😵💫
Good to see you back in the Saddle Tim, enjoyed your take on that there Revell kit, good result too.
@TimsScaleModelling
2 жыл бұрын
It’s ok Dave. Pleased with the photos too. Good to hear from you mate
An absolutely stunning piece of modeling
@TimsScaleModelling
2 жыл бұрын
Very kind Amor, thank you very much.
Wow is that ever nice. Thanks
@TimsScaleModelling
2 жыл бұрын
You’re most welcome Pete.
Awesome build
@TimsScaleModelling
2 жыл бұрын
Sorry for the lack of a response Parrot… must’ve slipped the net. Thank you very much 😎
Great build, subbed.
@TimsScaleModelling
2 жыл бұрын
Thank you Mark. It’s been slow lately but hopefully I’ll have something out soon(ish)
@markbaigent8373
2 жыл бұрын
@@TimsScaleModelling No rush, I will get a notification when you upload something 😎
Hi Tim I am just in the final stages of writing a book of the No489 squadron. It was at Langham the invasion stripes went of as the were based there with the Aussies and Canadians from April '44 to October '44 The squadron code when the first went to Langham was 1 so when you see the photograph of PS -6 you can just make out 1-6 underneath the new PS-6 coding also this aircraft had a radar antenna at the front of the fuselage. The book is called 'Forgotten Heroes' out later this year 2023. Cheers Don Wilkie
@TimsScaleModelling
Жыл бұрын
Oh wow Don, I’ll keep a look out for it. Best of luck
Ace mate 😉👌
@TimsScaleModelling
2 жыл бұрын
Thanks Timbo
Nice job Tim. I have this in the stash and based on your build, will be keeping it. Those flaps scream out for P.E enhancement though
@TimsScaleModelling
2 жыл бұрын
Yes they do, definitely needs something there. I don’t ever have them dropped but I reckon it was easier that way than closed.
...thanks for CC link too mate.
@TimsScaleModelling
2 жыл бұрын
Always. Something about CC 🤔🤗
Certainly more complex than the Tamiya Beau, very nicely done Tim.
@TimsScaleModelling
2 жыл бұрын
Was a bit Dave, glad it’s done now tbh. Ta mate
Beeeutifool at the end .great build
@TimsScaleModelling
2 жыл бұрын
Cheers Arthur 🤗
Look who's back. Has been a while bud ;-)
@TimsScaleModelling
2 жыл бұрын
Only been 6 weeks since the Liberator Guy! I’m not a machine 🤣
Notice your using x-22 on MRP- makes the decals behave, nice work Tim
@TimsScaleModelling
2 жыл бұрын
If nothing else, a good gloss just makes a model nice to the touch, no fingerprints. The whole “gloss or no gloss” for decalling is almost a secondary consideration. Ta mate
❤️🍻👍🏆
Shame all the lovely detail on the engines is hidden and the middle of the fuselage too
Shame to hide that beautiful engine
@TimsScaleModelling
2 жыл бұрын
Well yes actually Arthur. It did go through my mind to open up the nacelles but this wasn’t going to be this build. As nice the kit engines are resin replacements would be better. Thanks for stopping by.
Lovely build, quick question did you apply oil wash to gloss or matte surface?
@TimsScaleModelling
Жыл бұрын
Sorry it’s been so long .. semi-matt Matt 😆