Revealed! - The cost of an engine rebuild - Time lapse 2.25 Petrol Land Rover Engine, Full Rebuild
In this video I show you the full process of rebuilding the engine, months of work in just a few minutes. The cylinders were bored out 20 thou oversize, new pistons and rings were fitted, new big end and main bearings, new exhaust valve guides, new camshaft, followers and timing chain, along with a full set of gaskets and seals, new water pump, rebuilt alternator, new thermostat, clutch and many more parts besides. I also reveal the full cost of doing a rebuild like this and my labour on the job.
Royalty free music by Streambeats. Many thanks
@StreamBeatsbyHarrisHeller
Пікірлер: 50
That moment, after you've had an engine down to nuts and bolts, rebuilt it, turned it over, and IT FIRES! "IGOR IT'S ALIIIIVEEEE" Mwa ha ha ha ha ha! Thanks for sharing a window to your joy with us 👍. Can't wait to get my hands on a landrover santana 3.4l 6cyl diesel, get it back within tollerance, and leave it smartly painted and ticking away! Thanks for the inspiration.
@lozl
2 ай бұрын
Thanks for your kind comments :) that moment, or the anticipation of that moment can provide months or even years of motivation. We clearly share the same mental problems :)
Well done, deserves a lot more views 👍
@lozl
Ай бұрын
Thanks Jonathan, you're very kind 😀
A hell of a lot of work and effort condensed into 6 minutes! 😎 it’s a cracking effort man, must be bonkers watching this one back!
@lozl
Жыл бұрын
Thanks bud. Yeah it's cool to see. It's funny I wouldn't have had the patients for big projects as a youngster. Funny how this changes as you get older
@dizzy_cap_car_show
Жыл бұрын
@@lozl ya true enough! Enjoy the process far more I guess, rather than just working to a goal and get frustrated when it take ages! 👍
@lozl
Жыл бұрын
@@dizzy_cap_car_show yeah exactly that. Little and frequent goals get you through bigger projects
Love a good Timelapse strip down and rebuild.
@lozl
Жыл бұрын
Thanks buddy! :) I'm.so.pleased with this video and it was very little effort and no filming! :)
Im doing a 300TDI rebuild , probably going to cost about £1500 , but i did get all the alloy parts vapour blasted . New pistons , rebore , crank polished , cylinder head checked and new turbo cartridge and lots of other parts changed.
@lozl
Жыл бұрын
That sounds very good value. I might look into vapour blasting for my next engine project. Good for bare aluminium as I understand it?
Excellent video, well done!
@lozl
Жыл бұрын
Thanks you very much. Its great for motivation to receive comments like this. Much appreciated. 😀
Congrats! Great rebuild!
@lozl
10 ай бұрын
Thanks Stephen, much appreciated
Nice job 👍🏻
That edit at 1.28-1.32 was sweeeet. Love the vid 🙌
@lozl
Жыл бұрын
Thanks buddy. It took forever to film hahaha. Hope alls well
@joemason8812
Жыл бұрын
@@lozl in fairness I commented too soon, the whole video is top quality Loz 👌
@lozl
Жыл бұрын
@@joemason8812 thanks buddy, you're too kind :) :)
@lozl
Жыл бұрын
@@joemason8812 I've been enjoying the videos making more and more recently. The o ly minor frustration is wanting to keep going eith what I'm doing rather than taking the time to make the video :) I hope you tune in for the RR project.
Superb!
@lozl
Жыл бұрын
Thanks buddy. Didn't realise you have some videos up too. I enjoyed the money scare from 8 years ago hahahahaha
@patricksmithsloth
Жыл бұрын
@@lozl yeah, my YT is mainly for sharing vids with friends. Nothing special. 😂
Nice!
@lozl
Жыл бұрын
Thanks brosive
@dizzy_cap_car_show
Жыл бұрын
Ha! Beat you to First comment! Wallop!
@vaughanh2905
Жыл бұрын
@@dizzy_cap_car_show darn it!! 😡
@dizzy_cap_car_show
Жыл бұрын
@@vaughanh2905 😂😂😂
Great ! 👍👏👏👏✨🇫🇷✨
@lozl
Ай бұрын
Many thanks, glad you enjoyed the vid
👏
@lozl
Жыл бұрын
Thanks Frazer, much appreciated
Excellent job, don't suppose you'd like to help me do my engine rebuild lol
@lozl
7 ай бұрын
Kevin I would love to. I love an engine rebuild but I am rather drawing in projects of my own for time being.
What an excellent video...well done, you! Regarding the parts cost...were the new pistons and other bits genuine Land Rover or did you go with BritPart or parts from Turner's, or...? Thanks so much! ~Pete
@lozl
Жыл бұрын
You're too kind, manh thanks for comment. I went with turner engineering. I didnt question where they got parts from to be honest. I was happy with their statement that the parts they sell are the parts they use in their engine rebuilds. I have found turner to be very good. One piston was slightly damaged in transit, they sent another one very quickly.
@PDLiggett
Жыл бұрын
@@lozl thanks for the quick reply…that’s super helpful information. I’m in the States and am going to do a rebuild on my ‘83 2.25 diesel. Going to convert it to a petrol AND use a crank and conrods for a 2.5 litre. Planning to use Turner’s for parts and perhaps rebuild the used 8:1 petrol head that I bought.
@lozl
Жыл бұрын
@@PDLiggett sounds like an excellent project! I've heard the petrol is an all round nicer engine to live with. Engine building is my favorite part of an restoration. Enjoy :)
No new welch plugs?
@lozl
4 ай бұрын
Yes it had new core plugs throughout. See 0:56 in this video from the series: kzread.info/dash/bejne/enlhsLaYYNavZps.htmlsi=ea5scjm2Zu-XxzT4 Thanks for comments :)
The key to overhauling an engine is....timing.
@lozl
9 ай бұрын
You mean the cam timing???
@iceman9678
9 ай бұрын
+1 you get it!
@lozl
9 ай бұрын
@@iceman9678 the timing was pretty simply on this engine really.
@iceman9678
9 ай бұрын
@@lozl I'm in the process of overhauling the rare Defender Mpi Engine.
@lozl
9 ай бұрын
@@iceman9678 ooooo, what's that then.