Retrofitting Cruise Control to my MK7 Ford Fiesta 1.0L EcoBoost | *HOW TO*
In this video I’m retrofitting cruise control to my MK7 Fiesta in preparation for a big road trip. I’ve read a few posts online about the process and what is required to be able to retrofit this factory option so I would give it a go and show you guys how to do it.
If you’re looking to do this for yourself then I hope you find this video useful - if you did, please give the video a like 👍🏻 and consider subscribing.
To program the cruise control once fitted I used FORScan - here is the link to the FORScan website where you can download the software for yourself: forscan.org/ho...
You’ll also need a USB to OBD2 adaptor - this is the one I purchased: Vgate vLinker FS OBD2 USB Adapter for FOR-Scan HS/MS-CAN Auto Switch amzn.eu/d/81yktVb
The cruise control buttons and loom I bought secondhand from eBay.
Music Credits
----------------------------
Walk Into Paradise - Carmen María and Edu Espinal
Artist: Carmen María and Edu Espinal | Track: Walk Into Paradise
Music provided by KZread Audio Library
Yummu - Text Me Records/Leviathe
Artist: Text Me Records/Leviathe | Track: Yummu
Music provided by KZread Audio Library
Make Me Move (feat. Karra) (Tobu Remix)
Song: Culture Code - Make Me Move (feat. Karra) [Tobu Remix] | NCS Release
Music provided by NoCopyrightSounds
Watch: • Culture Code - Make Me...
Download/Stream: ncs.io/TobuRemixCr
#cruisecontrol #retrofit #fiestamk7
Пікірлер: 125
Another great video! Regarding the 9 vs 7 wires on the clockspring connector, the 'missing' two wires are used/required to connect through to a resistor ladder in the cruise control switch which allows the state of all five buttons to be determined (each button introduces a different value resistance into the circuit thus changing the voltage drop across the wires). These two wires are the black and green/brown wires in positions 9 and 8 respectively (far left as seen in your video at 3m14s). Incidentally, note that the cruise control switch has another pair of wires to it but they are just for illumination and they piggyback on the same illumination supply that is present for the audio control switch.
@MendItModIt
Жыл бұрын
My man 🤜🏻🤛🏻 thank you very much!
@abdulupadhay6506
Жыл бұрын
What year fiesta can cruise control be retrofitted too? Would it work for all MK7 from 2008-2017?
@konstantinoskaparelis6701
Жыл бұрын
Hello @mathewnewton3499, Do you know if you can still retro fit cruise control, if wires in positions 9 and 8 are missing? I assume that some wires/components need to be added/replaced. Do you know which are those components?
@bartsmith7428
4 ай бұрын
Thanks for that very detailed explanation. I hope my ST has the wires at the ready.
After ı saw your video I add my car cruise control and ıt works thanks a lot.
Thank you a lot! I folowed the steps as you described and it works! Really apreciate it! Top man
Ok so i watched this video and then attempted to retro fit my 2009 fiesta which only had 7 wires with CC. I wired up pins 27 & 28 from the Instrument control panel to the two missing pins on the clockspring connector. Did everything shown in this video. For a while i couldnt get it to work and then I went for a run on the motorway and found i had to be over 60KPH for the CC to engage. I'd been testing at 25mph. If this is something people want i could do a video of this on my channel.
@harvey1459
11 ай бұрын
Is it 27 to 7 and 28 to 8?
@ferleyreyes27
10 ай бұрын
@@harvey1459 es el 27 al 8 y el 28 al 9
@kc3dprints
10 ай бұрын
If you could do a vid that would be great mines got 7. If not its all good. Got access to all the wiring diagrams
@kamkata098
8 ай бұрын
Video on how to wire these would be appreciated !
@mallik2424
5 ай бұрын
Can you please add the video with 7 wires?
Another great video. Enjoying this series. Cruise control is the best thing ever. I have the adaptive cruise on my mk8 and I will never buy another car without it.
This video saved me!! Thank you so much from Kentucky 🫶🏼
Thank you! It work great. Very helpful video! God bless you!
Hello mate! Thank you so much for the fantastic, clear instructional video! It gave me the motivation to get mine retrofitted and glad to say it all worked! I’ve been a big fan of your videos since you began your channel and having both the same Models of Fiesta as yourself, it’s been an absolute pleasure watching you put your brilliant skills at use! It’s wonderful to also see how many people (including myself) you have helped, inspired, educated along the way! As a professional photographer myself, I must also compliment the footage you’re now getting thanks to your recent camera upgrade! Keep up the amazing work and wishing you all the best in your future! Kind Regards, Krish
@MendItModIt
9 ай бұрын
Thank you for your comment mate, that’s great to hear, I’m glad you can see the quality of the content I’m producing improving so I really appreciate that, cheers 🙏🏻
I went ahead and did this today, it genuinely is easier than it seems and anyone can do it. My advice for the hardest part (taking out the air bag) is use a small flat head screwdriver to get the best access, also lie the other way round on the seat and look from underneath the wheel lol. I was at it for a good hour until i tried to brute force it, turns out it needs a fair bit of force don't be scared to break anything.
I love retrofits.. I done the same retrofit on my Mrs golf a while back..
@MendItModIt
Жыл бұрын
Luckily they made this one nice and easy 😂
I was able to add cruise control to a 1999 Ford Escort. I was able swap out the steering wheel. The wiring harness and mounting points for all of the components were there. It was plug and play fortunately.
Wow thats amazing that you have done this. I have recently aquired an old 2011 1.6 TDCi Titanium (77k miles) which has cruise control as standard. I was really surprised that it had this. The car is like a well looked after 2 year car inside and out condition wise and smells like a new car too. I got lucky. It also has the power folding mirrors.
Great video. Used this after fitting steering wheel with cruise control to my c max. Had to do a couple of extra steps in Forscan though. As well as enabling cruise control I had to go into Engineering 1 mode and select Adjustable speed limiter then change it from without ASL to with ASL. Write this change the same as you did for cruise control. Then most importantly you need to go into DTC on Forscan and clear errors. (I had B112B steering wheel module error). After that cruise control worked fine.
@MendItModIt
2 ай бұрын
Not sure if mine will do the ASL but good shout on the codes. I have noticed sometimes it doesn’t seem to want to enable cruise 🤔 thanks man, I’ll look into it 🙏🏻
Awesome, I reckon I'll try this myself! Many thanks and great video!
Thank you so much for this amazing video!! Thanks to you I managed to fit a new stearing wheel along with cruise control! Worked amazingly 🎉🎉
Next job for the Wife's red edition already retrofitted reverse camera onto cars display. Also trying to find info for autolights and wipers but not found anyone thats done it yet. Great video and very informative.
@MendItModIt
Жыл бұрын
I was wondering about changing to the full display, not sure if they’re an easy swap but I’ll looking into it + the camera 👀
@AntonHorn
Жыл бұрын
For the lights & wipers you'll need the sensors under the windshield behind the mirror, & the respective wiring
@Nyle95
Жыл бұрын
@@MendItModItI've had a look about the upgrade to the Sync3 display, it seems like it's very hard to do and expensive as you'd want the US spec Sync3. Is this what you're talking about or something else?
@Nyle95
Жыл бұрын
How did you retrofit the reverse camera please and what Sync version was this with?
Thanks for this informative video! I managed to fit my mk7.5 new steeringwheel with cruise control and programmed it using forscan. I had an issue with my usb ELM 327 with ms/hs switch. It couldn't connect to my car at all. I bought the obdlink EX from amazon which worked without any issues with the fiesta. Just FYI for anyone who is planning this retrofit, don't buy the ELM 327. Its junk compared to obdlink EX.
Wow I never thought you could do that or I would of done it on mine. I had the same as you and I loved it so much it had everything looked good grate on fule £20 road tax and that 140 bhp can shift. I spent almost £1000 on security and the scumbags stole it and wrote it off in 8 mins of even having it was so gutted
good vid, just fitted aliexpress buttons, loom and shroud to my 2011 1.6 and it worked a charm. Thanks for the help, trying to get the airbag to unhook was the most stressful part.
@MendItModIt
7 ай бұрын
Seen someone post about them… had my doubts they’d work. What colour LEDs do they come with in the buttons?
@georgetav77
7 ай бұрын
@@MendItModIt I got red to suit my dash and instruments but blue seems more common, they also sell the loom, buttons and shroud separately or in a kit.
@MendItModIt
7 ай бұрын
@@georgetav77 oh really? I will check that out bud cause mine came with red bulbs but my clocks are blue and trying to mate the LEDs is a nightmare! Thanks for in info dude 👍🏻
Thanks for this instruction. Did it with my German Ford Fiesta 1.25 84HP MK7.5 and it worked. I started with the programming before (when i made my test period on ForScan), because i didn't know when i get a fitting steering wheel cover - and there was an error, because the wire from the connector to the switch is missing ;-) - just for info. I read that the 7.5 all have the wires.
A very detailed and simple video to follow. Great content.
cracking video mate very helpful, going to give this a try soon myself.
omg I'm saving up to do the same thing to my ecobeast too, thanks for the video!
Perfect video mate going to order the trim and loom now 💪🏼
Fantastic video and tutorial. Thanks :)
I did this on fiesta mk7 edge 2010 activated it and nothing happened button wise even tho cc icon is now activated on my dash which makes me think it should have worked maybe faulty buttons ?
Great content again MIMI 🎉
@MendItModIt
Жыл бұрын
Thank you sir 🙏🏻
Great video quality!
Hello, very nice video ! Thank you ! I have also an MK7 Fiesta and I wonder if somebody has already try to fit an automatic AC system instead of the manual AC system ?
Great video man 👍
@MendItModIt
Жыл бұрын
Thank you 🙏🏻
Great video. Thanks very much.
@MendItModIt
Жыл бұрын
Cheers mate 👍🏻
7k Mike! 🎉
@MendItModIt
Жыл бұрын
Madness 🤯🤩
Awesome, just the video I needed to see. I'm wonderin' where'd ya get the new steering wheel cover with the extra set of buttons though?
@MendItModIt
4 ай бұрын
Just off eBay mate 👍🏻
I've had the steering wheel controls ready to retrofit to my ST-180 for months but not got round the fitting it yet. Hopefully this video spurs me on.
@MendItModIt
Жыл бұрын
So for it mate 💪🏼
@Nyle95
Жыл бұрын
@@MendItModItAttempted today, wasn't successful. Absolute nightmare trying to unclip the airbag on the ST as you don't have the little slots either side, you have to try and unclip it through the holes on the back of the steering wheel, was trying for ages before I called it a day.
@MendItModIt
Жыл бұрын
@@Nyle95 bro does it had little lines/marks where those slots should be? You have to pierce the holes yourself but the marks should be there
@Nyle95
Жыл бұрын
@@MendItModIt It does but I've watched videos telling you to not pierce them... I've ordered a cheap set of pick tools as I read someone got it released a lot quicker using them instead of a screwdriver. Will try that next time and if not I'll consider piercing the holes.
@Nyle95
Жыл бұрын
@@MendItModIt So I removed the airbag, cleaned the metal ring and metal pads on the steering wheel and refitted, this hasn't fixed it. I then removed the horn itself from the car and tested it on the 12v battery using 2 leads as per the 2 videos below (2 different methods) and the horn didn't sound. Do you think this confirms that the horn itself is at fault? While the horn was off I cleaned all the connections to it etc. If so this does seem odd as it was working prior to this job. However when I tested across both pins in the horn I was getting about 0.4 Ohms, so there is continuity... kzread.info/dash/bejne/gId8xraye5ynd84.html kzread.info/dash/bejne/lm1sktWdgZTOgtI.html
Really good video I'd be interested to see if there's a way to retrofit cruise control into the ST150 as well🤔
@bjornej1
Жыл бұрын
st150 is a racing car not a cruiseship :)
Mate Love your content videos keep it up, Do you reckon curse control will fit on my car too. It’s Fiesta mk7 1.6 tdci zetec diesel preface.
Brilliant video, very well explained. I’ve just bought the new trim with the buttons and the wiring loom. Mine has come with just one spade connector, will it still work or do i need to buy a new loom?
@MendItModIt
Жыл бұрын
Thank you my friend 🙏🏻 Message me on instagram and show me what you’ve got, I’ll do my best to help 👍🏻
@JudeBickertonAgriculture
Жыл бұрын
@@MendItModIt cheers, i’ve dropped you a message 👍🏻
Any idea if this works on a 1.25 zetec ? It has electric throttle body so it should be possible?
I know my fiesta is compatible with cruise control but does it have an extra wire hiding behind the airbag or where do you plug in the extra wire for cruise control?
Os dois fios que faltam são ativação e retorno do cruise control. Mas mesmo inserindo eles no IPC ainda não obtive sucesso na ativação do piloto automático
Im guesing the ones without the hands free options dont have those 2 can wires on the steering colum
Its a nice work, but why didnt you got a steel frame, since you car have ST-Line elements(mine have it from factory). Piano lacquer black is the worst thing, what can happen to a car. My lil bro have a mk8 with all over piano lacquer black. It even scratches from just touching it.
Hola ! Sabes cómo puedo activar la función de volumen en los mandos del volante para un Ford 2011 ?
Nice one, do you know if the heated steering could be switched on assuming Ford made all the steering wheels the same ??
@MendItModIt
Жыл бұрын
I’m not sure mate but normally the parts will be different. I didn’t see a plug that looked like it would be heated wheel related so it might be a different steering wheel loom as well. The pins may well be there on the car loom side of that white connector but I couldn’t say, sorry 😢
Hey man, Very good video. Did you use the sound controls button from your old car and just connected it to the new wiring loom that you got? Becase I see the donor one is with the "M" button for the audio controls, which means it came from a car without voice connectivity etc and I saw here and there in different places and videos people saying that if you have a car with no voice connectivity you have to get a donor cruise control from a non voice connectivity car and respectively if you want to install cc on one with voice connectivity you have to get a cruise control from from a car with voice connectivity. Because the loom for the two buttons in either case is one piece, but now I see that you can just plug the different button. I'm guessing your voice control functions work as well as your cc now? Thanks!
@MendItModIt
Жыл бұрын
Yeah I swapped them over from the original. But neither of the sound controls worked at first, I had to enable those with forscan too. Again their are different options depending on which set of audio controls you have but I assume it depends what version of the audio system you have as to which buttons you can install for audio
@aeobs
Жыл бұрын
@@MendItModIt That is very useful to know. My car is with the "M" button that comes with the most basic audio system, without bluetooth etc. My donor cc is combined with the "voice button". So if I just swap the buttons, my voice controls probably wont work. In the best case you just have to get the corresponding cc combination, but what you said about reprogramming the aduio control button as well as the cc one is very helpful. Kudos that you mentiond the 9 vs 7 wires thing as well, that will save a lot of time and effort for a lot of people.
Hello, great video! I’ve just done everything as you did, and even though the cruise control green light now comes on the dash, nothing happens when the I press the buttons. Lights on the controls are working so I’m assuming that the controls should be working. I followed everything in ForScan but is there anything else I need to do. Any help would be great.
@ferleyreyes27
10 ай бұрын
amigo pudiste solucionar? tengo el mismo problema
Did you end up writing it to the IPC as well which is the backup module for the Central Configuration in case it needs it??
@MendItModIt
Ай бұрын
Oh no I didn’t, I didn’t know I might need to do that 😬
@griffinvideoprods
Ай бұрын
@@MendItModIt this is how we need to do it on a Focus which is pretty much the same. Any updates to the Central Configuration or BCM need to be repeated on the IPC. kzread.info/dash/bejne/fpd4ua1_ltbRgdY.htmlsi=FBnxoO3hiiLeg7J4
Have you retrofitted the LED DRL to standard headlight models before?
@MendItModIt
Ай бұрын
I haven’t mate sorry 😢
@mvwxiv
Ай бұрын
@@MendItModIt that’s ok, no bother. I’m struggling to get into “engineering mode” on FORscan; apparently I need to be in that to change the “headlight type” in central configuration. Great video btw, I’m wrestling with myself of doing this mod myself, love cruise control!
Hi, can we use this forscan to fix the code P062F:46-48 inner control module EEPROM error?
is it the same in ecosport thanks
@MendItModIt
20 күн бұрын
I’m not sure sorry I’ve not owned an ecosport
Do I have to cancel the subscription or free tryle
How can I add cruise control in ford fiesta zetec 2014??? Thanks in advance
@MendItModIt
6 ай бұрын
As I’ve shown in the video mate, as long as you have all of the wires in that plug it should work 👍🏻
Got the airbag off, put it all back together. Horn isn't working... absolute nightmare. Double checked the fuse which is fine so I don't know if something isn't connected correctly or something has got damaged in the process. Need to look online to see if I can find which wires are for the horn then probably have to take it all back off again.
@Nyle95
Жыл бұрын
Took it apart again, disconnected cables and reconnected, didn't fix it. Took it all apart again and refitted the original trim to see if there was an issue with that and it still doesn't work. Not sure where to go from here really.
@MendItModIt
Жыл бұрын
@@Nyle95 there’s a metal ring that runs around the back of the air bag and one of the spade terminals connects to that, it’s the ground for the horn. That ring makes contact with the three little metal pads on the steering wheel when you press the horn. Check all those pads are clean and the airbag is seated correctly, mine wasn’t the first time I refitted it and when I reconnected the battery my horn kept going off my itself
@Nyle95
Жыл бұрын
@@MendItModIt Thanks mate, will check all that again. If its not that I think the clock spring might have become damaged. I want to test the horn itself before I order anything though.
@Nyle95
Жыл бұрын
@@MendItModIt Gave all the connections, metal ring and metal pads a good clean and refitted and still nothing. Thinking it could be the clock spring.
did the lim speed work when you did this or is that something else that needs setting up
@MendItModIt
6 ай бұрын
It doesn’t have that function sadly 😢
Any suggestions?? My horn is now, flat out. Only way to get it off is to disconnect all cables🤣
@MendItModIt
8 ай бұрын
Airbag isn’t aligned/seated properly, happened to me as well although mine was prone to just randomly going off in the middle of the night for a couple days and then we I drove the car it went off every time I turned left 😂😂 until I figured out it wasn’t seated right anyway 😂
@aled702
8 ай бұрын
@@MendItModIt figured it out in the end, another issue though, got the same adapter you had for Forscan but it’s not recognising. Any suggestions? Hasn’t been an easy install for me i’ll tell you that🤣
Hey, great video, I just installed mine today. Coding worked, buttons lights works. Everything seemed working at first, but the cruise control buttons were not working and it messed up my volume controls too... Weird thing is that, now the volume controls, activate cruise control , but the other controls (for the cc) does not activate anything. Any ideas on the issue ? (the part i bought is from the exact same car and should match perfectly).
@MendItModIt
Жыл бұрын
It sounds like you’ve got the audio buttons and CC buttons plugged in the wrong way round 🤔
@Arthur-sh7bc
Жыл бұрын
Thanks for your quick reply. You are right, i inverted the plugs (cc controls and volume control), and now it work perfectly fine! Idk why, it was originaly plugged the wrong way... Thanks again for your guide it was the most complete one. @@MendItModIt
@MendItModIt
Жыл бұрын
@@Arthur-sh7bc no worries, glad it’s all sorted 👌🏻
Do you know if you can retro fit power folding mirrors in a fiesta?
@MendItModIt
7 ай бұрын
Pretty sure you can yeah. You can on the MK6
I HAVE A QUESTION, GUYS, DID ANY OF YOU INSTALL CRUISE CONTROL ON FORD FIGO 2019 OR FORD ASPIRE 2019, SO HELP ME GUYS, WILL IT WORK OR Not؟؟
@mallik2424
3 ай бұрын
kzread.info/dash/bejne/Z55-286Npaqndrg.html
Is there some way to fit cruise control on the mk6
@MendItModIt
Жыл бұрын
The simple answer, is no 😂
Those 2 wires are most Likely CAN bus wires, you definitly dont want to be adding those if you dont know what your doing
@MendItModIt
Жыл бұрын
I did think they were probably CAN wires, there doesn’t seem to be many wires in the loom for the steering wheel controls. Could peel the loom wrap back and see if they are twisted. I think most of the higher trim models likely come with them already but can’t be sure
@yourimeeuwisse711
Жыл бұрын
@@MendItModIt yeah, propably. But in my opinion, if your car cant accept cruise control from factory you propably shouldnt install it. Ive been a mechanic for long enough that ive seen a good few of those aftermarket kits fail.
@MendItModIt
Жыл бұрын
@@yourimeeuwisse711 that’s not what I did though dude, the wires in my car were there, in most cases they mean the car can accept cruise control 👍🏻 even so I’m plenty comfortable with CAN bus systems should the need ever arise 😁
@yourimeeuwisse711
Жыл бұрын
@@MendItModIt no no no i know. Your car is fine😅 as you said your car does have the factory wires and modules so yours will work fine. English is my 2nd language so maybe my point came across a bit wierd😅
“Ride wizzards vind deze video leuk”
Does it also work as a speed limit
@MendItModIt
11 ай бұрын
It doesn’t unfortunately no 👎🏻
Promo*SM 🤣