Retrofit Headlight Install on my First Gen Tacoma

Автокөліктер мен көлік құралдары

Here is a quick overview of how you install retrofit headlights on a first gen Tacoma. These were built from TEQ Customs and this exact headlight is now available on their website as a TRD Timmy Special edition!
teqcustoms.com/collections/1g...

Пікірлер: 51

  • @sqeekms6186
    @sqeekms6186 Жыл бұрын

    I am one hundred percent definitely getting the t r d timmy Version I looked them up last week out of the blue and saw all the ones they had to offer. The ones you got are sick as shit. Definitely 100% getting them. I'll mention that you referred me.👍

  • @trdtimmy

    @trdtimmy

    Жыл бұрын

    That’s awesome! I’m sure you will love and enjoy them as much as I do! Thanks for the support!

  • @edmora7662

    @edmora7662

    5 ай бұрын

    @@trdtimmydo you happen to know what are the small circuit boards on the leads of the RGB controller. What are they for. 4:55

  • @0bscura
    @0bscura2 ай бұрын

    Your truck is really nice. Love the paint and stickers, headlights, bumper, everything. Good job!

  • @mup8661
    @mup866110 күн бұрын

    Intro edit was sick as hell dude

  • @TheDeadMan3848
    @TheDeadMan384811 ай бұрын

    2:44 l relocated one of my horns (the one in front of the radiator), just to improve air flow. Love the stripes on the truck. You’ve earned a new subscriber 😉.

  • @DR-UTAH
    @DR-UTAH Жыл бұрын

    The headlights look awesome. Good job on the video.

  • @sqeekms6186
    @sqeekms6186 Жыл бұрын

    Thank you for releasing this video. It is super useful to me... It's weird how I was just planning on getting some. Of these from teq custom llc It was perfect timing.

  • @trdtimmy

    @trdtimmy

    Жыл бұрын

    Glad it was helpful!

  • @edmora7662

    @edmora7662

    10 ай бұрын

    How long was the lead time. Ordered mine on Labor Day.

  • @trdtimmy

    @trdtimmy

    10 ай бұрын

    @@edmora7662 lead times should be listed on their website. I would assume 10-12 weeks

  • @sqeekms6186

    @sqeekms6186

    10 ай бұрын

    @@trdtimmy I still haven't ordered mine yet I am relocating my rear shocks to the outside and doing King triple bypass on my 1st gen Sequoia. Then I got to upgrade to dual shocks and run King triple bypass behind my coil overs in the front. Also putting hydraulic the bump stops on the front and rear. And I got to upgrade my brakes. And I should be ready to order the TRD Timmy lights. I'm definitely getting them I just had other things I had to do first. I heard it was 7 to 8 weeks to get your order. I think that's what it says on their website.?

  • @HooliganGarage
    @HooliganGarage4 ай бұрын

    Maybe not the very best video but you do more then most guys with kids in car video which i really appreciate and think is awesome 😎 your interactions with your kid is more important then making a perfect video god bless your heart keep it up 💯

  • @trdtimmy

    @trdtimmy

    2 ай бұрын

    I appreciate that!

  • @sqeekms6186
    @sqeekms6186 Жыл бұрын

    First time I ever liked or commented on a video before I saw it.

  • @diegoherrera4847
    @diegoherrera484711 ай бұрын

    Can you do a video with just the "C" and turbine halo illuminated during the day directly in the sunlight to see how effective they can be as daytime running lights

  • @1Neff1
    @1Neff18 ай бұрын

    I'm late but this is sick!!!

  • @chrismartinez8245
    @chrismartinez82453 ай бұрын

    Just installed mine! Your video was 100% better than the one on the Teq Customs website. How do you change your light settings to Amber?

  • @trdtimmy

    @trdtimmy

    2 ай бұрын

    Thank you! I try to just get the setting from orange to red to get the hue I like

  • @sqeekms6186
    @sqeekms6186 Жыл бұрын

    I'm actually looking into buying some for my first generation Sequoia that I just spent $43000 on a sick lift on. 3 and 3/4 inch left. 2.5 total chaos, long travel kit, king shocks. Thirty five inch nitto ridgegrapplers on17 in method beadlocks Front metal bumper, rear metal bumper rock sliders all coastal warn wench off-road. Front and rear Eton lockers. 4,88 gears. Front flared fiberglass fenders to compensate for the long travel. Anyway, I thought these lights would be a great addition to my build.

  • @trdtimmy

    @trdtimmy

    Жыл бұрын

    Sounds like a sick rig! Someday I’d love to go LT

  • @sqeekms6186

    @sqeekms6186

    Жыл бұрын

    @@trdtimmy I've never driven l t but it is amazing They finished it this past may.

  • @sqeekms6186

    @sqeekms6186

    Жыл бұрын

    @@trdtimmy I got the two point five long travel total chaos And I forgot to mention my Method wheels are 3 inch negative offset. That's why I had to order the fiberglass flared fender. So it's almost 6" Wide on each side. You should do it, you will love driving long travel. That kit has about a 3 3/4 inch lift.

  • @sqeekms6186

    @sqeekms6186

    Жыл бұрын

    You will fall in love with your Sequoia all over again If you do it. I went the Break the bank way, but you can do it really nice. On a budget.

  • @yurryurr5846
    @yurryurr58465 ай бұрын

    Can I put these headlight on a 2000 Toyota Tacoma prerunner?

  • @bhavinbliss9649
    @bhavinbliss9649 Жыл бұрын

    Great!! I love your truck bro, I have a 2001 Gen 1 and your truck is my inspo! Can I get the former retro's off you?

  • @trdtimmy

    @trdtimmy

    Жыл бұрын

    Thank you! That means a lot! I have actually already sold them unfortunately

  • @Albertautolight
    @Albertautolight17 күн бұрын

    This is 3.0 inch Bi-led projector lens for jeep?

  • @sqeekms6186
    @sqeekms6186 Жыл бұрын

    I think I will ask if they can give me the Tr d Timmy edition for my Sequoia. That's who I was going to get them from. I was just doing research now about it. That's how it led me to your video. Can't wait to see it.👍 I even have the same style front bumper with kc flex era 4 duel functions. I am upgrading my total chaos. Control arms with triple bypass kings and have dual shocks. And I'm going to relocate my rear shocks to the outside with triple bypass kings. People think I'm crazy. I'm going to dump another 20k or 30K into it soon.phase 2

  • @orlando1986100
    @orlando19861007 ай бұрын

    where did you buy the front bumper?

  • @Gokywildcats11
    @Gokywildcats119 ай бұрын

    Whats you brand of fog lights

  • @ivandiaz5259
    @ivandiaz52596 ай бұрын

    Hy I just got to comment that I just recently got my trd timmy lights and I'm having issues with the RGb lights not working. Can I get some help or help??

  • @diegoherrera4847
    @diegoherrera484711 ай бұрын

    Where did you get your metal bumper? What is the make and model? Also, where did you get the lights for your bumper?

  • @trdtimmy

    @trdtimmy

    11 ай бұрын

    Bumper is from CBI offroad, unfortunately it is discontinued. The lights are LP6 from Baja Designs

  • @nonipaulette4520
    @nonipaulette45207 ай бұрын

    Hey there. I have the same bumper on my '03. Is it possible to do the TEQ retrofit install without removing the bumber? Accessing the wiring for my winch is a real pain. Great video and info.

  • @trdtimmy

    @trdtimmy

    7 ай бұрын

    Yeah it’s possible just may risk scratching the headlight housings trying to slip the grille in between the hoops of the bumper

  • @nonipaulette4520

    @nonipaulette4520

    7 ай бұрын

    @@trdtimmy Thanks. I didnt realize the bumper and winch plate were isolated units on the CBI moab (i didnt install). That makes it alot easier if so. Thanks for the info

  • @kyoowonseo3507
    @kyoowonseo35079 ай бұрын

    what kind of material on the face of the headlight, glass or plastic? Thanks for your reply in advance.

  • @trdtimmy

    @trdtimmy

    9 ай бұрын

    The lens of the headlight is plastic

  • @ianscreamsvideo
    @ianscreamsvideo Жыл бұрын

    Where did you get that grill?

  • @trdtimmy

    @trdtimmy

    Жыл бұрын

    Tacovinyl!

  • @lookingoodclub
    @lookingoodclub8 ай бұрын

    I’m having some problems connecting the RGB halos via the Bluetooth on the phone to Magic Lantern app. It just don’t wanna talk to each other my device on the app it doesn’t read anything ……power is hooked up properly. I did test to check I got the halos hooked up to the parking light so when I turn on the parking light first click on the stock, it should power up the halos, but they don’t and The app doesn’t read the IPhone . I’m gonna need some help on this one.

  • @trdtimmy

    @trdtimmy

    8 ай бұрын

    The first time I tried plugging my new wires into the taps on the parking light wire the metal tab on the inside of the tap bent so it wasn’t going in the female section and no power was going to them. Check that to see if it’s the same case

  • @ivandiaz5259

    @ivandiaz5259

    6 ай бұрын

    I'm having the same issues?? 🤦🏽

  • @johnnycage6780
    @johnnycage678011 ай бұрын

    How much does that set up run ???

  • @trdtimmy

    @trdtimmy

    11 ай бұрын

    You would probably be around $1,000 for these

  • @joshfattig514
    @joshfattig5148 ай бұрын

    What brand of bumper is that, I just got a 2000 with less than 100k on it I want to TRD timmy copy cat the bumper and headlights. LOL thanks

  • @trdtimmy

    @trdtimmy

    8 ай бұрын

    This bumper is from CBI Offroad but it’s currently discontinued 😩

  • @joshfattig514

    @joshfattig514

    8 ай бұрын

    @@trdtimmy ok thanks, your truck looks nice.

  • @jarrentoves4375
    @jarrentoves437510 ай бұрын

    How much for your old pair

  • @trdtimmy

    @trdtimmy

    10 ай бұрын

    They have already been sold

Келесі