Retractable Tool Holder Project
Ғылым және технология
Here I make a retractable tool holder, which will mainly be used to speed up and simplify threading.
Some of the tools I use and would recommend (affiliate links):
Starrett Edge Finder: amzn.to/3wLbqRp
Dykem Layout Fluid: amzn.to/3Tp2Xw1
Starrett Hacksaw Blades: amzn.to/3PdsbuW
CT-90 Cutting and Tapping Fluid: amzn.to/49TH4uo
Eclipse Scriber: amzn.to/4c6Ck6w
STA-BIL Rust and Corrosion Inhibitor: amzn.to/3wFSbIJ
Dremel 3000 Rotary Tool: amzn.to/3Pa3gIH
Trend Digital Level Box: amzn.to/49Z0dee
Sealey Imperial Hex Key Set: amzn.to/3wJFvRd
ElectroCookie Solderable Breadboard: amzn.to/4a1Dez5
Mitutoyo MIT103-129 Micrometer: amzn.to/3wDB9ei
Mitutoyo 103-130 Micrometer: amzn.to/3V4lEGr
Engineer Solder Sucker: amzn.to/438RFiT
3M Silicone Face Mask: amzn.to/3SYOLbu
Irwin Hacksaw Blades: amzn.to/3TpLOlK
Irwin Metal Hacksaw: amzn.to/3V6SvKI
Starrett 117D Centre Punch: amzn.to/3V6hRIG
Big Gator Tools V-Drill Guide: amzn.to/3Tq6hXP
Faithfull Engineers Square: amzn.to/48Jt05p
Milwaukee Set of Drill Bits: amzn.to/48O9uVo
Пікірлер: 72
Very nice!! Reminds me of the retractable threading tool from "The Shed Dweller"! 👍
For some strange reason, I really like the fact that you left in the sneeze.
@PaulsGarageProjects
7 ай бұрын
Remember it making me laugh when I was editing, so left it in there!
@robertoswalt319
Ай бұрын
@@PaulsGarageProjectsby the way, Gesundheit!
i finally saw enough details so this makes sense. Thank you.
Brilliant idea, simple and elegant.
@PaulsGarageProjects
Жыл бұрын
Thank you! Cheers!
Skvělá práce, a hodně zdraví do další skvěle práce a nápadů 👍🇨🇿👍
Who knew someone would use the rotary table as a display table...lol. nice work too.
@PaulsGarageProjects
Жыл бұрын
Thanks! I'm too stingy to fork out for a proper lazy suzan!
@MarcusLindblomSonestedt78
Ай бұрын
Actually a ToT trick from a few years back. :)
Muy buena idea y de lo más práctica para el roscado. Gracias por el video.
1:38 bless you!
Extremely sweet idea! Thanks for sharing Cheers
@PaulsGarageProjects
Жыл бұрын
Thank you very much!
That's a very good idea. Something to keep in mind.
@PaulsGarageProjects
Жыл бұрын
Thanks! I didn't have the original idea (it's probably older than me), but did come up with the simple way of making it 👍
Awesome Idea, I‘m definitely going to make one myself. Thanks for the inspiration!
@PaulsGarageProjects
Жыл бұрын
Thanks! It's a fun little project 👍
A great idea!. It beats turning dials. 👍
@PaulsGarageProjects
Жыл бұрын
Thanks! It's great until you instinctively wind out the cross slide unnecessarily!
@improviseddiy
Жыл бұрын
@@PaulsGarageProjects Human nature! 😂
Love it!!.... just what I'm looking for, I'll be making a similar one.
@PaulsGarageProjects
10 ай бұрын
Thanks! I've used it a few times since I made it and it works great!
This is a great idea
I like it 👍 Great idea !
@PaulsGarageProjects
Жыл бұрын
Thanks! 👍
Super patent. teraz dodałbym jeszcze jakiś automatyczny odrzutnik cofający nóż w miejscu zakończenia gwintu.
Muchas gracias por el aporte
NICE Job .. Good idea 👌🏻
@PaulsGarageProjects
Жыл бұрын
Thank you! Cheers!
Good concept. The holder with paper shim is not tight enough to stop micro vibrations when cutting. The purpose of the holder is to hold very firm. The depth of cut will be greatly effected. If you design the handle to apply both forward and downward force (to clamp the cutter) would help.
@PaulsGarageProjects
5 ай бұрын
Thanks for the tips!
Good job 👍👍
@PaulsGarageProjects
Жыл бұрын
Thank you! Cheers!
Clever! 😊
@PaulsGarageProjects
Жыл бұрын
Thanks!
Des gfoid Mia ganz guad.respekt oida
Like that! 👍 🇬🇧
@PaulsGarageProjects
Жыл бұрын
Thanks! 👍
I like it..
@PaulsGarageProjects
Жыл бұрын
Thanks!
Merci
Paul very nice work. Do you or where can I find plans? Thanks
@PaulsGarageProjects
7 ай бұрын
Thanks! You can find plans here: paulsgarageprojects.blogspot.com/2023/12/retractable-threading-tool.html
Great idea but not sure how accurate it will be to get continued depth of cut
@PaulsGarageProjects
Жыл бұрын
Thanks! I did a bit of measuring the other day, the repeatability appears to be well within 10 microns. I imagine it's at least as accurate as when I use the cross slide to retract/advance the tool.
Mmmmm .... Nice!
@PaulsGarageProjects
7 ай бұрын
Thanks!
The repeatability on that isn’t going to be any good. It’s a notable effort, but without an accurate “return to zero” the repeatability wont be there and your threads will likely always be out of tolerance. Plus every one of them I’ve ever seen or used always retracted on their own through either tool pressure, mechanical “switch”, or a shoulder. A good example of a complicated but homemade version can be found on the “Shed Dweller” KZread channel.
@RSPFactory
Жыл бұрын
Why won't the cam return to zero? There's going to be some slop, but it should always max out in the same place. I would have liked it to be integrated with the tool holder for rigidity, but the repeatability should be ok.
@PaulsGarageProjects
Жыл бұрын
I think the cam does lock in the same place, the lever rests on the top cover when engaged. I'm interested though, so I'll measure the repeatability. It's probably fine for the level I work at - have always creeped up and test fitted when cutting threads. I've been thinking about using a solenoid for auto retract, sounds like a future project 👍
@PaulsGarageProjects
Жыл бұрын
I did a bit of measuring this morning, the repeatability appears to be well within 10 microns. I imagine it's at least as accurate as when I use the cross slide to retract/advance the tool.
Good
Make one for internal please
Does it chatter more than normal?
@PaulsGarageProjects
Ай бұрын
I've used it a fair bit since I made it and haven't had any trouble with chatter. Although I do run the lathe at a slow speed when cutting threads.
I see it, and I understand it, but.... why? I mean, I get pulling the threading tool off the workpiece, but you still have to stop the carriage to keep from crashing the tool holder into the chuck. Or am I missing something? Nice work, though.
@PaulsGarageProjects
8 ай бұрын
Good question! I've used it a fair bit since I built it, there are a few benefits: It's quicker than using the cross slide, You can't lose track of the cross slide, It's easier to use the cross slide to advance the cut (I usually don't have the compound installed). I'd also seen much more complicated versions of this tool before and wanted to build this simple version. There is also the idea of adding some kind of stop so that the tool is automatically retracted, so you just have to disengage the half nut. It's then safer to cut the thread at a higher speed.
@doingstufforatleasttrying4843
7 ай бұрын
I have seen a cut off tool with something like that. It’s basically like a tap follower. So when you go to use the cut off tool it will push back if it gets too much pressure. Keeps from breaking the tool or destroying the part. Nice job. 👍….
@garyfaulk9802
2 ай бұрын
Here is a link to a automatic thread stop that I made for my lathe. It would probably work pretty good in conjunction with this tool so you could then automatically stop the carriage and then pull out the threading tool. kzread.info/dash/bejne/c4N_xpiantOZnLQ.html
Well done, nice editing, stop biting your nails.
@PaulsGarageProjects
28 күн бұрын
Many thanks! Like to keep them short - more of a nail clipper than a biter!
@ElmerJFudd-oi9kj
27 күн бұрын
@@PaulsGarageProjects Good man.
Do you have drawings for this, I would like to make one.
@PaulsGarageProjects
7 ай бұрын
Hi there, you can find plans here: paulsgarageprojects.blogspot.com/2023/12/retractable-threading-tool.html
As I'm a numpty - would you consider making one to sell?
@PaulsGarageProjects
7 ай бұрын
Hi Mark, afraid I've got too much on with other projects and stuff to make another one.
Nice work. Careful though: You don’t want ypur tool drawn into your workpiece.
@PaulsGarageProjects
Ай бұрын
Good point!
Seriously?..... i cut threads one shot. Not need to do 5 passes on a .100 thread cut.
@Th3F1dd
Ай бұрын
We got a badass over here. Look out for captain stretchhfab with his infinite torque lathe lol 👍