Not too shabby for my first try🤷🏼♂️ it was pretty yellowed so I’m glad it’s looking refreshed :-) #shorts #satisfying #restoration
Жүктеу.....
Пікірлер: 77
@charlie_35412 жыл бұрын
You did pretty good with this. I would have removed the screen though,and always make sure the shell is super clean.
@JakeSimmons
2 жыл бұрын
Thanks! Shell was cleaned and the screen lens is super scratched so I left it on to see what would happen
@ikeavaughan
8 ай бұрын
Nothing wrong with the screen not being removed.
@brisingr14Ай бұрын
I did this today using the hydrogen peroxide cream in the sunlight. Worked like a charm on my wavebird controller.
@VideoGameRestoration Жыл бұрын
I saw a new way on Twitter that uses fumes from the Hydrogen Peroxide. It's supposed to safer for the plastic!
@JakeSimmons
Жыл бұрын
Interesting!
@Hikuro2pnt0
4 ай бұрын
I'm doing the fume method right now on a white sega saturn....it's been in a bin for almost 12 hours, I'm scared to look.
@misaafton
4 ай бұрын
Update @@Hikuro2pnt0
@fatedestiny1397
3 ай бұрын
@@Hikuro2pnt0 what was the result?
@Hikuro2pnt0
3 ай бұрын
@@fatedestiny1397truthfully I think it could been better. It DID have a result but the yellowing was far too heavy. I had to go back to the bath method and leave it in the solution for 3 days.
@michaelmartin8337Ай бұрын
What % solution did you use?
@Cow_12983Күн бұрын
Better than full restoration videos
@jayceethechamp2 жыл бұрын
wow amazing i love your content btw! you should do a psp video!
@JakeSimmons
2 жыл бұрын
PSPs are really annoying to work on but maybe I’ll give it another go soon! I do have a couple bad PS2s tho
@jayceethechamp
2 жыл бұрын
ps2! plz that be dope to
@JohnPaul-lv8ys19 күн бұрын
If you don't have UV lights, place it under direct sunlight. It is not as effective but it is bettern than nothing.
@dannythach6244 күн бұрын
Nancy's Game Boy
@frankly349828 күн бұрын
The 8 Bit Geek did a test and the best was heating up the peroxide, as its more about the heat than the uv light. I mean it was a drastic difference between uv light and the heating method
@TS34675
17 күн бұрын
I used Retro-brite on a vintage Traxxas Villain, nice thick coat and put it in the Florida sun for 1hr and it was bright white again with minimal blotching.
@freebobafett2 жыл бұрын
Lemon juice and salt works as good or better.
@remgu2000
Жыл бұрын
Would you still need UV light?
@freebobafett
Жыл бұрын
@@remgu2000 the sun provides enough uv light for it to work better.
@freebobafett
Жыл бұрын
@@remgu2000 I've done it with a super Nintendo and it went from yellow to gray inside a couple hours.
@remgu2000
Жыл бұрын
@@freebobafett Thanks. Since it'll be cloudy here in Dallas tomorrow I have some blacklights on it now with peroxide. I'll try lemon juice and salt next.
@freebobafett
Жыл бұрын
@@remgu2000 uv pierces the clouds, but blacklight may work faster...I thought the bleaching agent was more important since uv light caused the discoloring in the first place.
@Tech_Duster2 жыл бұрын
Wow
@ddanyela5 ай бұрын
yes, the odd tinkering way
@jaeevangelista5805 ай бұрын
I have a question does this work for rubbers like na botton inside of it?
@blackicethehusky5894 Жыл бұрын
Can you use a empty fish tank and do the same setup?
@bootywrecker
11 ай бұрын
I don't see why not, just make sure you have a reflective surface, OddTinkering has some really good content involving setting one of these up
@JoeVu936 ай бұрын
What concentration of Hydrogen perioxide that being used
@noctisthecat72475 ай бұрын
I have indoor grow lights with high UV and lux. Would that be sufficient enough?
@yorkshirelad3133
5 ай бұрын
😂
@noctisthecat7247
5 ай бұрын
@@yorkshirelad3133 so just an emoji face? Thank you for nothing
@yorkshirelad3133
5 ай бұрын
@@noctisthecat7247 I thought you were being sarcastic about the grow lights? Well done for just attacking me though 👍 what a lovely person you are
@dietermitplatten20 күн бұрын
What's the purpose of the Aluminium foil and UV light?
@Subsbench
11 күн бұрын
The ultraviolet light speeds up the process (I believe) whereas the foil prevents any of the light from escaping
@enjoythesho19928 ай бұрын
Was this just standard off the shelf peroxide?
@JakeSimmons
8 ай бұрын
yup!
@enjoythesho1992
8 ай бұрын
@@JakeSimmons awesome
@chen2win2 жыл бұрын
What if you didn’t have UV lights, would it work about the same?
@pavma7
2 жыл бұрын
if you would put it in the sun for long enough yeah
@JakeSimmons
2 жыл бұрын
I’m honestly not sure what the peroxide does but you definitely need UV whether it’s the lights or the sun
@2cool4u06
2 ай бұрын
Any potential light source comparable to UV lighting that emits similar energy should do the trick since it'll serve as the catalyst. The catalyst is required for a faster reaction time for the free radicals to bind with the hydrogen peroxide, ultimately bleaching the discolouration caused by photo-oxidation. 😃👍
@gamesarelegends3473 Жыл бұрын
How long until its yellow again?
@AlgaeEater09
Жыл бұрын
Probably 15 years.
@v.r.t0846
Жыл бұрын
I have my gameboy since the 90's and it's not yellow. I always keep it in the box when I don't use it.
@Mr.Green33
5 ай бұрын
May be 1-1,5 year and it yellow again.
@njworkshop5029 Жыл бұрын
Are these just cheap uv black lights?
@JakeSimmons
Жыл бұрын
Yes
@pocokocskaofficial10 ай бұрын
Is it harm the dot matrix plexi glass?
@JakeSimmons
10 ай бұрын
Yeah I would remove the lens if you were to try it yourself
@broganhogan34696 ай бұрын
If you repeat this, or leave it in longer, will it yield better results?
@tanathornsattakul154
6 ай бұрын
Yes but I prefer to give it some heat around 40-50 celcius.(The more heat the better, but not too hot) Just leave it in sunlight for a day and with the UV light for a night that should work.
@broganhogan3469
6 ай бұрын
@@tanathornsattakul154 thank you!!
@jayflores39475 ай бұрын
Better than buying a new fake shell
@hectorvelez15463 ай бұрын
so,after doing it, what would happen to the hydrogen peroxide used? is it still reusable?
@JakeSimmons
3 ай бұрын
I wouldn’t use it for anything else
@hectorvelez1546
3 ай бұрын
@@JakeSimmons interesting, thanks again.
@zereubeuleuАй бұрын
So you put your fingers in Hydrogen Peroxide ??? What is the percentage ? Can't see it on the video.
@JakeSimmons
Ай бұрын
3%. Higher percentage will just do it faster
@zereubeuleu
Ай бұрын
Thanks. It makes more sense 😀
@dagmont460524 күн бұрын
This guy doesn’t know what he’s doing.
@JakeSimmons
24 күн бұрын
If you “know” that I “don’t know what I’m doing,” why wouldn’t you tell me what I’m doing wrong so I can improve or to help others reading the comments? Or did you just want to say something just mean with nothing to back it up?
@dave882626 күн бұрын
For the live of god please use gloves!
@davidaamaya1 Жыл бұрын
How did that work
@Hawk_90sGamer Жыл бұрын
I do this with the sun .you don't need UV lights. The sun is the biggest and most powerful UV light.
@JakeSimmons
Жыл бұрын
Yeah the sun works great! But this is a little more concentrated so it goes a bit faster
@Hawk_90sGamer
Жыл бұрын
@@JakeSimmons you are the master
@Otisbxk8 ай бұрын
Looks the same lol use salon care 40 and leave it in the sun for two hours
Пікірлер: 77
You did pretty good with this. I would have removed the screen though,and always make sure the shell is super clean.
@JakeSimmons
2 жыл бұрын
Thanks! Shell was cleaned and the screen lens is super scratched so I left it on to see what would happen
@ikeavaughan
8 ай бұрын
Nothing wrong with the screen not being removed.
I did this today using the hydrogen peroxide cream in the sunlight. Worked like a charm on my wavebird controller.
I saw a new way on Twitter that uses fumes from the Hydrogen Peroxide. It's supposed to safer for the plastic!
@JakeSimmons
Жыл бұрын
Interesting!
@Hikuro2pnt0
4 ай бұрын
I'm doing the fume method right now on a white sega saturn....it's been in a bin for almost 12 hours, I'm scared to look.
@misaafton
4 ай бұрын
Update @@Hikuro2pnt0
@fatedestiny1397
3 ай бұрын
@@Hikuro2pnt0 what was the result?
@Hikuro2pnt0
3 ай бұрын
@@fatedestiny1397truthfully I think it could been better. It DID have a result but the yellowing was far too heavy. I had to go back to the bath method and leave it in the solution for 3 days.
What % solution did you use?
Better than full restoration videos
wow amazing i love your content btw! you should do a psp video!
@JakeSimmons
2 жыл бұрын
PSPs are really annoying to work on but maybe I’ll give it another go soon! I do have a couple bad PS2s tho
@jayceethechamp
2 жыл бұрын
ps2! plz that be dope to
If you don't have UV lights, place it under direct sunlight. It is not as effective but it is bettern than nothing.
Nancy's Game Boy
The 8 Bit Geek did a test and the best was heating up the peroxide, as its more about the heat than the uv light. I mean it was a drastic difference between uv light and the heating method
@TS34675
17 күн бұрын
I used Retro-brite on a vintage Traxxas Villain, nice thick coat and put it in the Florida sun for 1hr and it was bright white again with minimal blotching.
Lemon juice and salt works as good or better.
@remgu2000
Жыл бұрын
Would you still need UV light?
@freebobafett
Жыл бұрын
@@remgu2000 the sun provides enough uv light for it to work better.
@freebobafett
Жыл бұрын
@@remgu2000 I've done it with a super Nintendo and it went from yellow to gray inside a couple hours.
@remgu2000
Жыл бұрын
@@freebobafett Thanks. Since it'll be cloudy here in Dallas tomorrow I have some blacklights on it now with peroxide. I'll try lemon juice and salt next.
@freebobafett
Жыл бұрын
@@remgu2000 uv pierces the clouds, but blacklight may work faster...I thought the bleaching agent was more important since uv light caused the discoloring in the first place.
Wow
yes, the odd tinkering way
I have a question does this work for rubbers like na botton inside of it?
Can you use a empty fish tank and do the same setup?
@bootywrecker
11 ай бұрын
I don't see why not, just make sure you have a reflective surface, OddTinkering has some really good content involving setting one of these up
What concentration of Hydrogen perioxide that being used
I have indoor grow lights with high UV and lux. Would that be sufficient enough?
@yorkshirelad3133
5 ай бұрын
😂
@noctisthecat7247
5 ай бұрын
@@yorkshirelad3133 so just an emoji face? Thank you for nothing
@yorkshirelad3133
5 ай бұрын
@@noctisthecat7247 I thought you were being sarcastic about the grow lights? Well done for just attacking me though 👍 what a lovely person you are
What's the purpose of the Aluminium foil and UV light?
@Subsbench
11 күн бұрын
The ultraviolet light speeds up the process (I believe) whereas the foil prevents any of the light from escaping
Was this just standard off the shelf peroxide?
@JakeSimmons
8 ай бұрын
yup!
@enjoythesho1992
8 ай бұрын
@@JakeSimmons awesome
What if you didn’t have UV lights, would it work about the same?
@pavma7
2 жыл бұрын
if you would put it in the sun for long enough yeah
@JakeSimmons
2 жыл бұрын
I’m honestly not sure what the peroxide does but you definitely need UV whether it’s the lights or the sun
@2cool4u06
2 ай бұрын
Any potential light source comparable to UV lighting that emits similar energy should do the trick since it'll serve as the catalyst. The catalyst is required for a faster reaction time for the free radicals to bind with the hydrogen peroxide, ultimately bleaching the discolouration caused by photo-oxidation. 😃👍
How long until its yellow again?
@AlgaeEater09
Жыл бұрын
Probably 15 years.
@v.r.t0846
Жыл бұрын
I have my gameboy since the 90's and it's not yellow. I always keep it in the box when I don't use it.
@Mr.Green33
5 ай бұрын
May be 1-1,5 year and it yellow again.
Are these just cheap uv black lights?
@JakeSimmons
Жыл бұрын
Yes
Is it harm the dot matrix plexi glass?
@JakeSimmons
10 ай бұрын
Yeah I would remove the lens if you were to try it yourself
If you repeat this, or leave it in longer, will it yield better results?
@tanathornsattakul154
6 ай бұрын
Yes but I prefer to give it some heat around 40-50 celcius.(The more heat the better, but not too hot) Just leave it in sunlight for a day and with the UV light for a night that should work.
@broganhogan3469
6 ай бұрын
@@tanathornsattakul154 thank you!!
Better than buying a new fake shell
so,after doing it, what would happen to the hydrogen peroxide used? is it still reusable?
@JakeSimmons
3 ай бұрын
I wouldn’t use it for anything else
@hectorvelez1546
3 ай бұрын
@@JakeSimmons interesting, thanks again.
So you put your fingers in Hydrogen Peroxide ??? What is the percentage ? Can't see it on the video.
@JakeSimmons
Ай бұрын
3%. Higher percentage will just do it faster
@zereubeuleu
Ай бұрын
Thanks. It makes more sense 😀
This guy doesn’t know what he’s doing.
@JakeSimmons
24 күн бұрын
If you “know” that I “don’t know what I’m doing,” why wouldn’t you tell me what I’m doing wrong so I can improve or to help others reading the comments? Or did you just want to say something just mean with nothing to back it up?
For the live of god please use gloves!
How did that work
I do this with the sun .you don't need UV lights. The sun is the biggest and most powerful UV light.
@JakeSimmons
Жыл бұрын
Yeah the sun works great! But this is a little more concentrated so it goes a bit faster
@Hawk_90sGamer
Жыл бұрын
@@JakeSimmons you are the master
Looks the same lol use salon care 40 and leave it in the sun for two hours