Restoring a 95 Sea-doo XP / XP800 in 7 Minutes - Today We Wrench XP800 Build Series EP.9
Автокөліктер мен көлік құралдары
Thank you so much for all of the support and we hope you all learned something from this restoration.
Our next build series will kick off Wednesday July 21st with the SPXX Limited race build so don't miss it!!!
See ya next time
Пікірлер: 75
If you would work this fast all the time imagine how many skis you could get out !!!! A+ on those cabinets
My most favorite jetski of all time. Just never owned one lol.
@phimister78
4 ай бұрын
They’re absolute junk, nothing but trouble
If only they all went this quick! Super clean video series. Nice work
@TodayWeWrench
3 жыл бұрын
I wish it was that easy
Just wanted to say thanks for posting this entire build series! These videos were very informative and helped with "restoring" a '96 XP800 that I recently picked up. It had been severely neglected and left to sit in the extreme Texas heat for years. The Texas sun is brutal and I couldn't get the finish to a full color restoration and gloss as you did, so I ended up doing my own custom full wrap, but after an engine rebuild, the XP is back up and running, keeping another 2-stroke on the water and that lovely mixed fuel smell wafting through the air. Keep these videos coming!
@TodayWeWrench
2 жыл бұрын
Great to hear!! Im glad we are helping the community, thats why we do what we do. Keep the Brappers alive
Love the videos! Great projects! I picked up another 95XP800 a few weeks ago and im picking up another one this weekend!
I've learned a ton from you guys thanks for all the great info and the humor make the videos enjoyable to watch
@TodayWeWrench
3 жыл бұрын
Thanks so much for the positive feedback
Really liked the style of your videos and series on this. I would love to see move retro PWC restorations in the future! Also I’ve been looking for a Yamaha exciter 270 restoration video/series can’t seem to find one. Would love to see something like that as well. Keep up the good content!
@TodayWeWrench
3 жыл бұрын
Thank you!!!
Awesome build . You guys helped me alot with my 96 XP rebuild . Ow I'm getting ready to build my stepdad a 97 XP
@TodayWeWrench
3 жыл бұрын
HELL YEAH BROTHER
That super clean works great for removing oil deposits. Got my 97 gtx 787 broke down. And yes the river is messed up and going to get worse more rain coming in the next few days.
@TodayWeWrench
3 жыл бұрын
Super nasty conditions for sure
Keep up the good work Nick, looking good. What do you scrub the bar pad with?
@TodayWeWrench
3 жыл бұрын
We did a video on it, Check it out!
Looks great! What did you use to get the spots off handlebar cover?
@TodayWeWrench
Жыл бұрын
Soft scrub with bleach and a fine scotch brite pad
Did you guys have to break in the Engine ? other parts when launching ? took me 8 months last year to fully rebuild my XP ,...great video ...5 stars
@TodayWeWrench
3 жыл бұрын
Premix the gas even when using oil injection. Its 2oz per gallon plus the injection system. Take it easy for the first 2 hours and don't hit more than 3/4 throttle.
Where do you guys get your new bumpers from
After you guys restore all these things do you ever run into any issues after? I have a 97 GSX that I rebuilt the entire engine, replaced the fuel lines, and did other miscellaneous things to, and before this it always seems to break down lol I just want a reliable ski!!
@TodayWeWrench
2 жыл бұрын
Zero issues
Wow! I’m jealous. I had a 96 XP. Best sea Doo that I’ve ever owned. Light, and could jump in the ocean like crazy. Curious… how much money would it take to completely rebuild and refurbish like you did? Just in parts and supplies. Not including labor. And where did you get all of the parts ie. Fuel lines, hoses, etc. does dealer still have these things, or is there an aftermarket company?
@TodayWeWrench
2 жыл бұрын
About 3k if you replace every part like we do with oem
Would love to find a restored or super clean one of these
@TodayWeWrench
Жыл бұрын
You and me both! This is alot of work lol
Yesterday I drove accross florida to get this Mint 96 XP. Literally showroom condition has net even been registered or ridden since 97. And I’m wondering how I should first get it started. Anything I should do. We are going to replace grey fuel lines, clean tanks, is there anything specific we should do beside that?
@TodayWeWrench
Жыл бұрын
I would do a carb rebuild no question. I would also ground out the plug wires, remove the spark plugs and spray a liberal amount of storage oil down the cylinders and turn it over by hand a couple times. Everything else sounds perfect.
Great videos. Tons of help. Just had to rebuild my 96 XP due to blew a hole in piston some how, plus I’ve had a long time issue with leaking inner crank seals causing hydro lock after sitting for a while. Decided to do complete rebuild. Should have it all wrapped up by tomorrow. Your videos helped greatly. Any special steps I need to do for first fire up? Concerned that oil lines are not primed.
@TodayWeWrench
3 жыл бұрын
Add 2oz of 2 stroke oil per gallon of gas for break in if you are using the factory oil pump. After that tank you can go straight gas. Upon first start let it idle and hold the oil pump wide open manually until oil flows into the rotary cover.
@kendavis8557
3 жыл бұрын
@@TodayWeWrench thanks, just what I needed to know. Makes sense.
@kendavis8557
3 жыл бұрын
@Today We Wrench So, got her running today. Pop off for carbs was about 29 in one and 32 in the other. Set initial low end meddle to one turn. Runs and idles fine, hesitation with quick throttle, but not bad if ease into it. What adjustment would you suggest?
@Lothsahn
3 ай бұрын
@@kendavis8557 high speed 0, low speed 1.5 on the bench. You don't adjust the carbs once installed. Did you rebuild with genuine Mikuni? If not, you need to use that. You shouldn't be revving the engine until breakin, but the symptoms you're saying suggest a lean condition.
What steps did you do to make the plastics look brand new
@TodayWeWrench
Жыл бұрын
In the other videos, check them out
Do you ever have problems with the skis after you fully restore them? Such as a rectifier going bad or something electrical?
@TodayWeWrench
3 жыл бұрын
Not really. The only pieces of the ski that are not new at that point would be the electrical. I don't like using aftermarket so thats why I keep them original. I have a couple OEM NOS rectifiers on hand incase ones goes bad though. Never really had a MPEM go bad unless it sees water.
@jetskirehab750
3 жыл бұрын
@@TodayWeWrench I’m gonna start keeping a stock of rectifiers. Every ski I buy seems to have a bad one 😂 gotta love ski restorations… how many have you restored this year alone?
@TodayWeWrench
3 жыл бұрын
@@jetskirehab750 3 but have 7 coming down the pipe
Bro! I need your help! I’m the second owner of a 95 xp 800 I’ve had the ski since 96-97 it’s been outside and has sun fade. Where did you find replacement decals? Is the plastic piece for the handle bars still available at dealerships? Mines cracked. It was hydro locked at one point and it’s bored over with weisco pistons. What do you recommend to get this in running shape again?
@TodayWeWrench
2 жыл бұрын
Watch the full series. All the info and tips you need is in the videos.
What soap did you use to clean the inside of the hull
@TodayWeWrench
Жыл бұрын
Super Clean
Ceramic 9h on the paint
At 3:50 can you tell me we’re I can get the decal and what paint to use and how you do it
Where did you get your decals from?
@TodayWeWrench
3 жыл бұрын
Check out the decal install video we made. All info in in that one.
What purple paint do you use for the exhaust?
@TodayWeWrench
7 ай бұрын
We powder coat everything
Can u do a seadoo spi 96 turbo be case I've one and I like to make turbo
Hey I’m getting a 96 xp800 and I was wondering where you got the graphics because this one I’m getting is a clean slate
@TodayWeWrench
Жыл бұрын
PWC Graphics
@jakehall8613
Жыл бұрын
@@TodayWeWrench sorry one more question I seen on the test ride vid the guy with the carbon sticker kit had blue on his but it doesn’t give the option to change any colours how did he do that? If it’s too much trouble don’t worry about it but it would be really helpful
Can you simply pull the engine and leave the impeller shaft in place?
@TodayWeWrench
29 күн бұрын
You cannot
@RaginCajundogg
29 күн бұрын
@@TodayWeWrench so I must pull the jet pump and the shaft? Trying to decide if I want to install the top end in the ski or remove the engine.
Where did you get the decals?
@TodayWeWrench
Жыл бұрын
PWC Graphics
whats the paint code for the yellow seadoo xp paint? i need to paint my single pod hood.
@TodayWeWrench
Жыл бұрын
No paint code thats the stock hood
your channel is going to take off - i'm callin' it. These vids are great, esp. for the novice or even intermediate mechanic who just needs a visual guide of how to do shit on their Seadoos.
@TodayWeWrench
3 жыл бұрын
Thank you for the support!!!! Much appreciated
@marcbrazzers
3 жыл бұрын
@@TodayWeWrench I've got a 98 speedster with twin 787's so most of your vids apply to my boat. Thanks again guys!
Dude I have a 96 XP can u do a. Engine swap and get it. Running. ? Make a video please. For my grankids $$$
What hood is that? From a SPI?
@TodayWeWrench
25 күн бұрын
Thats a factory hood found on a 95
@dirtbag565
25 күн бұрын
@@TodayWeWrench I wanted to put a single gauge one with no mirrors on my 95 xp.
@neildiato8483
6 күн бұрын
1995 xp hood? Looks like a spi?
You can tell how abused a ski was by the amount of stickers on it. No stickers, adult owned and maintained. Monster Energy, Punisher, SBT, etc, the ski was beat hard and never maintained
@TodayWeWrench
2 жыл бұрын
Im glad someone besides me knows that lol
Didn't even test the ski you build
@TodayWeWrench
11 ай бұрын
We did, it’s at the end of the video you boner