Thanks for watching! Please Like, Subscribe & Share! ► Subscribe to channel: tinyurl.com/m6brne9z

No restoration at all....just painting and cleaning :(

Поршневую забыл покрасить

@brianw8411

Жыл бұрын

🤣🤣

@khoitran4033

Жыл бұрын

Depois eu tinta

@user-gq9nu6cz2y

Жыл бұрын

ага и вкладыши

@aiatolakhomening5209

Жыл бұрын

Kkkkkkk

U did a great job, by painting the parts without masking the holes and other parts, with out putting new parts, not taking out the crank, no bearings change, not using a torque wrench.. Great job 👍

@Restoration-Reuse

Жыл бұрын

Thanks for watching and supporting me. Thanks very much!!!

@brandenoconnor7299

Жыл бұрын

Im sitting here and thinking the exact same things as this video is playing!!🤣😂🤣😂🤣😂🤣😂🤣😂

@mygamingmania.4346

Жыл бұрын

@@brandenoconnor7299 exactly bro 🤣

@turbogrin

Жыл бұрын

LOL Poor guy has never learned how to used the box end of a wrench!

@CathyInBlue

Жыл бұрын

Zero fucks given about masking, assembly lube, torquing, gapping, or timing.

Looks like a Kabota 850 ver good little engine.

First of all, the mud should be removed before removing the first bolt. Painting is the last thing and must be done with the engine already closed. Using an iron hammer is a bad word and the alternator should never be painted (cooling). Congratulations on making it work despite everything!!

@affidavitdonda

Жыл бұрын

oh yes, i cringed more with each next step of this work ;) good that it works, i guess it would be scrapped otherwise and now it did some nice views on the platform

@bitsnpieces11

Жыл бұрын

From what I know an alternator is cooled by the air being pulled through the inside of it not over the outside.

Berminggu-minggu usaha, terima kasih kerana berkongsi

@Restoration-Reuse

Жыл бұрын

Please share, support me by subscribing. Thank you!!!

Отличная покраска! 👍🏼 Теперь можно на алиэкспресс выставить😄

@Restoration-Reuse

Жыл бұрын

Спасибо, что смотрите и поддерживаете меня. Спасибо большое!!!

@user-th1ky7jf5x

Жыл бұрын

Это чурка даже не умеет в иронию и сарказм🤣🤣🤣

@abdrahemkhalf4615

Жыл бұрын

غير رائع

Ông này mới học sửa máy nè

nice work on this kubota

@Restoration-Reuse

Жыл бұрын

Thanks for watching and supporting me. Thanks very much!!!

я понял. это не ремонт двигателя, а просто покраска.

أحسنت احسنت وشكرا والله يوفق الجميع لما يحبه ويرضاه .

@Restoration-Reuse

Жыл бұрын

شكرا لمشاهدتي ودعمي. شكرا جزيلا!!!

Beautiful Restoration I am waiting for the next video

Mới không có xì nhớt xì dầu mỡ máy ra ráp lại chạy ít bữa nhớt khói dầu mỡ máy nó ra ước máy

🎉 muy buenos motores Kubota 3 cilindros te sacaste un 10 esperemos que sigas haciendo videos de motores diesel

@Restoration-Reuse

Жыл бұрын

Thanks for watching everyone. Please consider becoming a channel member to support future project like this!

Sửa thế mà cũng quay lên đúng là không có việc gì làm

The only restoration i found in this video was just lapping of the valves. Just clean, spray, and reassemble. Nothing even Torqued ?.

Basically something I used to do on the farm when I was 9years old

Take it apart, clean it and then put it back together. What did you rebuild?

A mechanic who uses the hammer in everything that does not put any oil to lubricate the internal pieces and uses the hammer to hit the cam shaft Fuel pump really, how did this engine work? It's really a miracle

@Restoration-Reuse

Жыл бұрын

Thanks for watching and supporting me. Thanks very much!!!

@RLO900

Жыл бұрын

You're welcome, thanks for accepting the criticism.@@Restoration-Reuse

@londen3547

Жыл бұрын

It worked the same as before the so called "restore", running it without coolant at the end of the video certainly didn't help either. Much time and effort could have been saved by simple pressure washing and flushing the oil system. Maybe the guy needed to exercise his mechanic skills.

Anyone else shouting...... No, No, No at the screen? Brave man to strip the injection pump!! hope he calibrated it! New Seals? Looks pretty at least.

Хорошая работа, но я всегда думал, что прежде чем разбирать и ремонтировать что либо, нужно сначала очистить от грязи и помыть агрегат.

@Restoration-Reuse

Жыл бұрын

Спасибо, что смотрите и поддерживаете меня. Спасибо большое!!!

Got it done cheap . Thats what you call a tuneup and valve job

@Restoration-Reuse

Жыл бұрын

Thanks for watching and supporting me. Thanks very much!!!

We call that a liquid over hall. Usually done by done by someone wanting to sell for more than it is worth.

Jamas llevaría un motor mio con este señor

Good, careful work.

من افضل المهندسين👍

@Restoration-Reuse

Жыл бұрын

شكرا لمشاهدتي ودعمي. شكرا جزيلا!!!

вечно живой двигатель от японского генератора. реставрацией тут и не пахло,просто помыли и рукожопно покрасили.

Did anyone else watch in horror as the puller destroys the snout of the crank?

@ve3cwq47

Жыл бұрын

I almost shit myself when he hammered in the injection pump cam.

great job I need one of those battery powered impacts

que chulada de motorsito para un proyecto genial te felicito

It’s sure going to look good when it quits!

@Restoration-Reuse

Жыл бұрын

Thanks for watching and supporting me. Thanks very much!!!

Что б клапана притереть,не обязательно разбирать весь мотор и красить)))

I'm surprised he doesn't break alloy parts whacking it with the club hammer all the time.

Super. Bravooo!

@Restoration-Reuse

Жыл бұрын

Thanks for watching and supporting me. Thanks very much!!!

@Uralinette

Жыл бұрын

Bravo, oui et non, on n'entame pas un démontage complet sans au moins nettoyer la merde autour du moteur !!! Sinon, oui, super !

I like the colour you painted it

@Restoration-Reuse

Жыл бұрын

Thanks for watching and supporting me. Thanks very much!!!

Great video quality and camera position Suggested: wash it outside before taking it apart with laundry detergent to remove dust dirt and sand; grease the puller threads

Foi so uma limpeza do motor e pintura mais e bom sempre elogiar ta de parabéns o rapaz.

Lots of self opinionated haters here. It works for him and where is your video?????

@Restoration-Reuse

Жыл бұрын

Thanks for watching and supporting me. Thanks very much!!!

покрасить можно было полностью не разбирая

Bon travail

I like the DCA 20volt impact and its amazing watching from the USA where everything is either DEWALT, MILWAUKEE and so on.

@Restoration-Reuse

Жыл бұрын

Thanks for watching and supporting me. Thanks very much!!!

I love the blue color. very cool

Myje się PRZED ! rozebraniem i maluję PO ! złożeniu. Kolejny "geniusz"

@Restoration-Reuse

Жыл бұрын

Dzięki za oglądanie i wspieranie mnie. Dziękuję bardzo!!!

I probably would've power washed before but good video.

Bravo🙏🏻🔥✨ Pas de courroie de distribution et D,électronique le boulot est plus Facile

@Restoration-Reuse

Жыл бұрын

Merci de m'avoir regardé et soutenu. Merci beaucoup!!!

Obviously there is a lot more than we see here. How did he time the shafts? How did he time the valves? etc.

@Restoration-Reuse

Жыл бұрын

Thanks for watching and supporting me. Thanks very much!!!

Love all the world class engineers who can only bad mouth the guy , glad your perfect

@ve3cwq47

Жыл бұрын

Would you say the same if he were an aircraft mechanic?

@jamesdiamond820

Жыл бұрын

@@ve3cwq47 glad your a heart surgeon

Trabalho incrível!!

Good job !!!

@Restoration-Reuse

Жыл бұрын

Thanks for watching and supporting me. Thanks very much!!!

you tighten everything with drill???. the engine will take itself apart in 10 days of use

Very lucky the pistons were good. The rings were not gummed in place either. Being cast iron it will forgive you not precisely torquing the head on. At least you did a sequence that should stop any head issues. Well done.

Nice work

ficou top e funcional amei

I think this is a dong feng 3cylinder engine, I have had several of these running stationary water pumps 24/7 they are a great throw-away engine. cheap but efficient.

@BadHaddy

Жыл бұрын

Its a kubota D1100/d1101, unless it was so slavishly copied they copied the blocks part number!

Làm tốt lắm

Vous avez du courage ,quand je vois l'état du moteur et que vous arrivez a lui redonner une certaine jeunesse ,c'est admirable , vous avez de la chance, aussi, de pouvoir trouver des pièces de rechange . Merci pour votre vidéo.

@Restoration-Reuse

Жыл бұрын

Merci de m'avoir regardé et soutenu. Merci beaucoup!!!

I was with you until the cleanup began, not a restore, just a bit of cosmetic cleaning and put old parts back together. Didn't take the crank out.

@stevenwithanS

Жыл бұрын

Not a torque wrench in sight. It might last an hour.

@alberteinstein9045

Жыл бұрын

Yeah, not a restoration. Just putting lipstick on a pig

@brettlittle9913

Жыл бұрын

Restored,my arse,no new bearings,rings,gaskets,etc,just a paint pot rebuild that some poor sod is going to pay good money for and watch it go bang

@ferdystrik4629

Жыл бұрын

Just painting kan do enough

@oreilly3592

Жыл бұрын

@@ferdystrik4629 Paint is cosmetic it has no relation to the function of the machine

Muy interesante el trabajo , pero no fue completa la restauracion del motor , porque en todo el video nunca se saco el cigueñal para revisarlo , no reviso el estado de los metales de bancada , tanto del eje de levas como los metales de las bielas ,menos reviso el estado de las bancadas , no reviso el circuito de lubricacion del cigueñal , y esasfaltas de proligidad en un futuro podria causar daño muy significativos para un buen desempeño del motor , mi clificacion del 1 al 10 , serias un 5 como calificacon , espero que este comentario se para que mejoren y que sea de ejemplo .

@Restoration-Reuse

Жыл бұрын

Thanks for watching and supporting me. Thanks very much!!!

I never saw the actual fault, for why the engine was abandoned..? I've repaired a Kawasaki 3 cyl diesel, that the cylinder head was cracked thru the water jacket about mid way. A Yanmar also. What was the initial problem? Also- running bolts down with impact is kinda scary a little.

@Restoration-Reuse

Жыл бұрын

Thanks for watching and supporting me. Thanks very much!!!

Отличное восстановление краски на двигателе. Остальное мытьё в бензине и сборка. ))))) вкладыши старые поставили ? ))) правильно после бензина они как новые .

@Restoration-Reuse

Жыл бұрын

Спасибо, что смотрите и поддерживаете меня. Спасибо большое!!!

@khoitran4033

Жыл бұрын

Obrigado amigo

Ага , вот как оказывается двигатели капиталят. Разобрать , помыть , покрасить и лучше нового . Но на нем лучше не ездить .

Und nichtmal die Zylinder nachgehont und die Kolbenringe erneuert, da bringt die blaue Farbe auch nichts...

@Restoration-Reuse

Жыл бұрын

Danke, das merken wir uns!

Why does the location on this channel say 'United States'. Looking at this video, the clothing, the surrounding, the workshop, the language and the traffic noice I have a very hard time believing that.

Для того что бы покрасить двигатель не обязательно его разбирать

@Restoration-Reuse

Жыл бұрын

Спасибо, что смотрите и поддерживаете меня. Спасибо большое!!!

Good job 👏 one day you will make a great mechanic hopefully you can get somewhere where there are parts and torque wrenches exc exc but you did great with what you had

@Restoration-Reuse

Жыл бұрын

Thanks for watching and supporting me. Thanks very much!!!

Me gusta como le pones toda tu pacion al restaurado del motor de tractor y se lo que se siente por yo tambien e restaurado varias veses diferenciales dana y me gusta todo el proseso del desarmado limpieza restaurado y rearnado de todo y es muy relajante

@Restoration-Reuse

11 ай бұрын

- Thank you very much for choosing to watch my video. Please leave a like if you did like the video, please subscribe and feel free to comment with your thoughts, and as always thank you for watching.

Never use a wire brush to restore head or block surface. And how long did he run it with no coolant in it?

Great job

Чтобы покрасить можно и не разбирать 😁

It’s perfect

@Restoration-Reuse

Жыл бұрын

Thanks for watching and supporting me. Thanks very much!!!

Y'all need to put some grease on those puller threads.

@Restoration-Reuse

Жыл бұрын

Thanks for watching and supporting me. Thanks very much!!!

Parabéns, ficou top! Brasil.

@Restoration-Reuse

Жыл бұрын

Thank you for watching this video

@dosdepartamentos1451

Жыл бұрын

Muy bueno, pero no conversa no habla no chifla nada de nada🇺🇾l

Tear down , clean up , and paint only !

Ten silnik trzeba było potraktować myjką, dopiero potem rozbierać.

@Restoration-Reuse

Жыл бұрын

Dzięki za oglądanie i wspieranie mnie. Dziękuję bardzo!!!

So what did this engine come out of?

First rule of mechanics club paint everything. Second rule, mechanics club paint everything. Third rule of mechanics club, Find a different club

Love the engine color ,,nice work

@Restoration-Reuse

Жыл бұрын

Thanks for watching and supporting me. Thanks very much!!!

Kubota great engine alot of the time they weren’t even worn out Just need nozzles some have 25 k hrs and barely show any sighns or wear

@Restoration-Reuse

Жыл бұрын

Thanks for watching and supporting me. Thanks very much!!!

Painting old pitted oil filter and reshuffling used rings and bearings, worth every penny of those $20 in labor.

@Restoration-Reuse

Жыл бұрын

Thanks for watching and supporting me. Thanks very much!!!

Thanks god you don't work for me

Hello, whit fan is incorrec position. Disambled aun rotate whit good air caudal

Молодцы ребята умеете работать

@Restoration-Reuse

Жыл бұрын

Спасибо, что смотрите и поддерживаете меня. Спасибо большое!!!

nice but you could have clan the engine first, but really nice restoration

@Restoration-Reuse

Жыл бұрын

Thanks for watching and supporting me. Thanks very much!!!

Какие у движка размеры, параметры? Корзина сцепления один в один москвич 407,если бы можно было головку развернуть то дизельный 407 сделать. Блиииинн, ну вот всё впечатление испортили-- зачем сальники покрасил, да и вообще почему не в красный гоношный?

Please use new rings on pistons next time and plenty of oil for reassembly On the engine will last a lot longer

Parabéns brasil salvador Bahia

@Restoration-Reuse

Жыл бұрын

Obrigado por me assistir e me apoiar. Muito obrigado!!!

Excellent job 👏

@Restoration-Reuse

Жыл бұрын

Thanks very much!!!

@knobsdialsandbuttons

Жыл бұрын

@@Restoration-Reuse You're welcome !

Yes lets paint the the gears to WTF! engine revipainted

Why is nothing ever cleaned before disassembly?

Before disassembling the engine, you should clean the engine thoroughly , and drain the oil . Thanks

I love cleaning process 🤤

@Restoration-Reuse

11 ай бұрын

Thank You for Watching! Please Subscribe 🥰😘 And Check My New video!!!

bon travail

@Restoration-Reuse

Жыл бұрын

Thanks for watching and supporting me. Thanks very much!!!

Mesin itu di pasang di sepeda motor tossa bagus

@Restoration-Reuse

Жыл бұрын

Terima kasih telah menonton dan mendukung saya. Terima kasih banyak!!!

GREAT JOB. COMPLIMENTS ( FROM BRAZIL)

@Restoration-Reuse

Жыл бұрын

Nice to hear that, thank you very much :-)

Больно смотреть

clean off the dirt and grease //as when it was new// when it was put to together as a new motor to do the job right !!! in new motor build your way-- you must add grease and dirt in new build //this why a new motor has no grease or dirt .as its clean

@Restoration-Reuse

Жыл бұрын

Thanks very much!!!

where are all the new parts for this restore job? looks like all it got was a ok cleaning inside and out, and some paint.

@Restoration-Reuse

Жыл бұрын

Thanks for watching and supporting me. Thanks very much!!!

Chúc mừng em

@Restoration-Reuse

Жыл бұрын

Ваш комментарий очень правильный, спасибо, что смотрели и поддерживали меня. Спасибо большое!!!