Hi there when you did the gluing of the crack in the wood one of the things I do is use some of the wood dust from when you were sanding it and mix it with the glue then use it . It will match the wood color so much better

Прекрасный , чистый стол, хорошая отделка стены , а то у других так грязно на столе ,что даже мелкие детали не видно !!! Спасибо что показали как нужно содержать своё рабочее место !!!P.s. И реставратор ВЫ К-А-С-С-Н-Ы-Й !!! 👍👏🥇🛠🗜🔧⚙️‼️‼️

Nice! A little helpful hint. Whenever you are turning in nicely polished screws like that, ALWAYS use a perfectly fitted screwdriver blade that fits the screw slot perfectly. Then you don't mar or deform the screw heads again. And to verify you have a true level vial set properly, once you get it centered, turn the level end for end and the bubble should remain in the exact same place. Thumbs Up!

If only modern tools were made with the same care as the tools of the past.

More like this, please. Simple tools, essentially all hand done up to the final brass polish. Excellent! A real pleasure to watch. I was surprised to see that the date was not die stamped into the wood, but only inked on.😟

Nice restoration. Shame you lost the "1943" stamp on the side

Very good restoration Spirit Level 👍👍👍

Very nice resto mate. 👍👍👍

Fantastic job thanks for sharing looks great 🍺🍺👍👍👍👍👍

Great job! Very thorough. It mesmerized me.

Das gute alte Schwindelholz. Sieht gut aus, sehr schöne Arbeit.👍

Beautful piece of work, but a shame you lost most of the "Warranted Correct" stamp from the brass as well as the 1943 from the wood. The level could have been restored to your high standards of beauty and functionality without being subjected to so much unnecessary sanding.

@CreatorCade

4 жыл бұрын

Yeah I felt that he had went a little far on the sanding as I watched the stamping on the brass fade-away. As for the date on the wood it can be put back with a good pen.

Here's a tip for you for the next time you need to get glue into a tight space - like the crack you sealed on this project. Instead of trying to poke the glue into a space, use a syringe and a heavier gauge needle. Suck the glue into the syringe, attach the needle, then poke the needle as far down into the space as you can. Press the plunger and the glue is injected exactly where it needs to be. Clamp as usual and hey presto - a secure, sealed wooden joint or veneer that's reattached to perfection.

Well done, May I suggest that you try fitting the screw driver blade to match the width and thickness of the slot of the screw. This will prevent the bruising of the slots on the screws. Might mean you need to by more slotted screw drivers ;-) Again, nice job!

Awesome restoration !!!!!!!!!!!!!!!!!!!!

Wonderful restoration! 👌🥳 Great video 👏

Amazing restore

Nice RESTORATION.👍

Gorgeous!

This is not a spirit level, this a nice level. A spirit level contains an alcohol filled glass tube which is highly precise. Normal levels are okay but if you have used a spirit level you will know the difference. Nice job though.

@tonyjames327

4 жыл бұрын

Mike and it’s not level.

parabens.. lindo trabalho, até as fendas dos parafusos ficaram alinhadas...

Beautiful

I'm loving your videos!

Looks great. I was wondering where you were going to get the tube with the bubble.

Good job!

beautiful job, nice piece. I'd lose the pan head screws and put back the slotted flat top brass screws that came with it originally. Polished tops would give it a better look

It's just a touch out is that... I'd have fixed the brass pads before bedding in the vial on that putty... And would've used a known level surface... Looks nice though...🇬🇧👍

@DaleDix

4 жыл бұрын

Just seemed like he was excited to put the bubble in when he got it.

ottimo restauro complimenti

Very fine restoration. Why are the screws on the top not mounted flush in the countersunk holes? Is this likely how the original screws were? Fantastic!

Museum quality restoration. Such a pleasure watching a true craftsman.

@wizzzjer

4 жыл бұрын

Not even close to museum quality.

Schön gemacht cheers

Ah, das war wunderschön anzuschauen! :)

@MWRestoration

4 жыл бұрын

Dankeschön 😁

class work

How do you like those Wera screwdrivers?

Awesome, that don't make that stand the test of time.

I've got like 20 of these. One thing I can't understand is how the he'll they can be missing so many screws

👍👍👍

Nice restoration!!! I do the same :))

Todo esse tempo de video pra isso?

Great job until the end, not the correct screws

@michaeldowling1065

4 жыл бұрын

Kevin Williams I thought that but didn’t want to upset him 😂

Lo antiguo, No se lija, pierde su valor

Flat head screws on the top would have been better than domed screws.

👍👍👍👍👍👍👌👌👌

Seriously? You sanded off the date stamp?! Well, there goes any historical significance right there.

Not so fast man, it might explode.

could try your hand at restoring something military ?

I almost slept because of your "slow motion" moves. Nice job and nice theme but very boring video.

@philanna38

4 жыл бұрын

So just bring up the settings and set the speed up.

@veliborkrstic6310

4 жыл бұрын

@@philanna38 This is not the right answer. Sit down and learn zour lesson for tomorrow.

So many critics . He did his best

@pinolo951

4 жыл бұрын

Angelo Curcio è vero, ma due suggerimenti erano buoni, mescolare colla e polvere di legno e iniettare la colla con ago e siringa

@angelocurcio9415

4 жыл бұрын

Bruno Rebua translate please

ASMR for men

@angelocurcio9415

4 жыл бұрын

So many critics. He did his best and that’s what matters

@jonathanrandall4140

4 жыл бұрын

@@angelocurcio9415 What does your comment have to do with ASMR?

My mom born in year 1943

@SomePeopleCallMeWulfman

4 жыл бұрын

So is mine :-)

@jonathanrandall4140

4 жыл бұрын

I like eggs

За уничтоженное клеймо - диз...

A bit dramatic for a simple restoration, don't you think?

Todo bien, pero...... kzread.info/dash/bejne/aWZs05KMisLHkbQ.html

You need more ads. How about one every minute?

You didn't need to sand he brass, just use brass cleaner. You sanded it and unnecessarily fucked up the engraving

Wrong use of a screwdriver dude!

РУКАЖОП....

Worse 15min of my life to damn slow

Stick to repairing modern stuff, phones etc, you rubbed away all the character of this level, such a shame!