Gun Restoration | Colt Model 1903 Pocket Hammer, (with test fire)!
Ойын-сауық
#restoration #restore
Here is an amazing part of design history for colt modern handguns. The restoration of the colt Model 1903 pocket hammer. The Colt pocket hammer was modeled after the Colt sight safety and Colt 1902 Sporting and military models. This model has no slide stop or safety. This model was different from the 1911 in the fact that it had two barrel link pins rather than just the one. The 1903 also had a huge design flaw. The rectangle locking pin at the front of the slide could brake sending the slide right into your face since the takedown of the slide was in reverse of the 1911. All in all the model had its drawbacks and maybe one positive. This pistol was ambidextrous due to no slide stop or external safety. Hope you enjoy the video and as always thanks for watching. Please consider subscribing for new upcoming videos.
Pay Pal account, paypal.me/thekinzlerbros?loca...
Пікірлер: 364
Watching these always makes me want to go clean something
@TheKinzlerBros
18 күн бұрын
Ya that makes sense, thanks for watching we appreciate it!
Those results were amazing. With a replacement barrel that pistol would be as good as the day it was made. Great video.
@TheKinzlerBros
13 күн бұрын
Thank you we appreciate it, ya a new barrel would be the finishing touch. Thanks for watching!
The guns look better and better with each restoration! Keep up the fantastic work!
@TheKinzlerBros
17 күн бұрын
Thank you very much, will do!
I personally appreciate the voice over explanation of what you’re doing and why. Thank you for sharing and the video, not to mention saving another handgun.
@TheKinzlerBros
18 күн бұрын
Thanks for the feedback, we appreciate you and thanks for watching!
@Cheung_Kody
12 күн бұрын
@@TheKinzlerBros I respectfully disagree. While I appreciate the knowledge transfer, I use these videos to wind down before going to sleep, dialogue doesn't help with that. Your videos though, do what you like.
Delighted to see another Kinzler Broseley video dropped this morning 👍
@TheKinzlerBros
17 күн бұрын
Hope you enjoyed it! Thanks for watching!
Mesmerizing videos. If you could make twenty of those a day, I would watch them all. Thanks for posting.
@TheKinzlerBros
17 күн бұрын
Thank you for the kind words and I would if I could. Thanks for watching
Really nice to see someone correctly restoring these. Great work
@TheKinzlerBros
16 күн бұрын
Ya there are a few hacks out there. Thanks for watching we appreciate it!
@notnowchief.3089
15 күн бұрын
Correctly restoring them maybe. But they are intentionally rusting these firearms, and then putting up this Farce like they're saving them 😣
@notnowchief.3089
15 күн бұрын
@@TheKinzlerBrosjust don't understand why y'all intentionally Rusty things and then act like you're restoring them you're using vinegar and saltwater... it's seriously just so dishonest
Awesome restoration as always! 😎👍 I love how the parts comes out clean after glass bead blasting. Top level gun restoration channel on KZread! 👍
@TheKinzlerBros
18 күн бұрын
Thanks for the kind words and for watching!
Very nice work....powerful enough its day too.
@TheKinzlerBros
16 күн бұрын
Thank you, absolutely! Thanks for watching
Nice job man
@TheKinzlerBros
18 күн бұрын
Thanks!
amazed that magazine came out as easy as it did. It looked completely rusted shut. Awesome resto. Beautiful result in the end. Came out new!
@TheKinzlerBros
17 күн бұрын
Ya me too, thanks we appreciate it! Thanks for watching
Well done indeed on a challenging piece of work.
@TheKinzlerBros
18 күн бұрын
Thank you, yes it was. Thanks for watching
Great job guys. Love seeing these old guns being brought back to life 🤙🏼
@TheKinzlerBros
17 күн бұрын
Thanks, it is very satisfying for me Thanks for watching!
I remember when you restored my favorite Beretta 34. Also in this case, you are simply great!!!
@TheKinzlerBros
18 күн бұрын
Ya that was a fun one, thanks for the kind words and for watching!
Outstanding work once again. 🍻
@TheKinzlerBros
18 күн бұрын
Thanks we always appreciate it, thanks for watching!
Excellent job. Very interesting Colt gun. Very cool when antique weapons return to working condition. Bravo man!
@TheKinzlerBros
16 күн бұрын
Thank you, yes it is! It's very satisfying work. Thanks for watching
Great job! Thanks for posting!
@TheKinzlerBros
18 күн бұрын
Thank you, thanks for watching!
Un lavoro perfetto. Bravo.
@TheKinzlerBros
15 күн бұрын
Thank you, thanks for watching!
Very fine work as usual Kinzleri! It looked like there was a quarter-cocked safety function on this fine piece when you worked the hammer during reassembly...yes? Or was it just me? Carry on the awesome!
@TheKinzlerBros
18 күн бұрын
Thanks we appreciate it, ya you are correct! Thanks for watching!
Nice, was surprised you were able to hit the disc onto the Texas Star. Wow that barrel was almost slick. Good job guys.
@TheKinzlerBros
18 күн бұрын
Ya me too, thanks we appreciate it! Thanks for watching
what a beautiful piece
@TheKinzlerBros
7 күн бұрын
Yes it is, thank you. It's amazing how smart they were to keep improving the design. Thanks for watching!
Another beautiful restoration.
@TheKinzlerBros
18 күн бұрын
Many thanks!
🙋 Congratulations on adding to the collection, great model. Soon you will collect all the early automatic Colts.👍👏💪
@TheKinzlerBros
18 күн бұрын
Thanks, ya that's the goal! Thanks for watching
Really nice job on that one, and you did damn good on that test fire. Imagine with a new barrel!!
@TheKinzlerBros
15 күн бұрын
Thanks, ya it would have nice. Thanks for watching!
Beautiful Pistol Good Design Always just looks right 🫶
@TheKinzlerBros
17 күн бұрын
Absolutely, thanks for watching!
good to see you using multiple rods for removing the mag so halving the stress on the count holes but still recommend using bamboo chopsticks ;-)
@TheKinzlerBros
17 күн бұрын
Ya, thanks for the advice.
Outstanding camerawork! Restoration perfection.
@TheKinzlerBros
18 күн бұрын
Thank you for the kind words and for watching!
Amazing restoration and it works !
@TheKinzlerBros
14 күн бұрын
Thank you, absolutely! Thanks for watching
If you only manage to find a replacement barrel it should be fine like in the good old time 😉
@TheKinzlerBros
17 күн бұрын
Ya I can find one for sure, thanks for watching
Another great job, love the way you guys film these vids, very satisfying!
@TheKinzlerBros
15 күн бұрын
Thanks William, thanks for the kind words! Glad you like them
Great to have you back with another fantastic restoration.
@TheKinzlerBros
17 күн бұрын
Glad be back, thanks for watching!
I imagine one could just hand load 38 super ammo to the lower pressure of the older cartridge since they are dimensionally identical.
@TheKinzlerBros
18 күн бұрын
Yes you absolutely can do that all you need is to know the load and fps. I believe now I do not re load ammo and I’m not well versed in the procedures in re loading. But I read on a forum that you can do this yea. But .38 acp is available online. That’s where I got the cartridges to fire this colt. They are loaded to period cartridges that the firearm was designed for. But that doesn’t mean that one of these old colts can’t fail upon firing. Which is really scaring to think about if that from barrel link pin failed and the rectangle pin failed the slide could become a projectile directly at your face. Sorry for the long response. Thanks for watching
How were those rounds in such good shape? I mean come on! They weren't even tarnished!🤨
@TheKinzlerBros
6 күн бұрын
I don't know what you are talking about, I still wasn't going to use them. Thanks for watching
@mantia39
4 күн бұрын
@TheKinzlerBros ..LMAO...OK pal. Whatever you say...🙄
Beautiful restoration well done 👏 👍
@TheKinzlerBros
18 күн бұрын
Thank you very much!
Great job! I'd be proud to own that old Colt. And compared to that first view of the barrel? Shot out out or not, you made it work. Some pilots in WWII would carry their own personal pistols. I can imagine some young pilot in WWI having that Colt from home with him in his jacket in case he needed to make a forced landing.
@TheKinzlerBros
13 күн бұрын
Thanks, we are! Ya it's crazy to think about what they did for this country! Thanks for watching
Always love a Sam Colt design.
@TheKinzlerBros
18 күн бұрын
Me too, thanks for watching!
@cowboybebop3994
18 күн бұрын
Samuel Colt died in 1862, so even though this model is carrying his name, it was not designed by him, but by John Moses Browning. But don't get me wrong. I think that this is one of the nicest looking designs of a handgun ever made, especially in the hammerless version. Maybe only put in the shadow by the Luger 08.
@punknoodles0
18 күн бұрын
@@cowboybebop3994 Damnit, that's right. I r stoopid
Good work
@TheKinzlerBros
17 күн бұрын
Thanks
Execelente trabajo!!🙂👍🏻
@TheKinzlerBros
12 күн бұрын
Thank you very much! Thanks for watching
This is a beautifully simple gun.
@TheKinzlerBros
18 күн бұрын
Absolutely, thanks for watching!
Unless that gun was a range gun at a shooting club or some such I find it hard to believe that one shooter actually put that much lead down one barrel. That isn't a hot round. Even if you had new rifling cut the bore might be to large. At ten feet or so it might still hit.
@TheKinzlerBros
15 күн бұрын
It must have been for the rifling to be gone, thanks for watching!
Didn't know there was a 1903. Really a great job. It turned out very well. Too bad about the rifling.
@TheKinzlerBros
15 күн бұрын
Ya they had a few trial and errors before they got to the 1911. Ya for sure. Thanks for watching
Awesome, as always! Funny, because I really don't like Guns. But for someone as clumsy as me, watching you work is like Magic. Really cool! 👍
@TheKinzlerBros
18 күн бұрын
Thank you very much for the kind words we appreciate it, thanks for watching!
After You Restored It Don't Leave It Dry Put Some Lubricant So It Won't Jam It Will Function Well.Replacement Parts Are Available
@TheKinzlerBros
18 күн бұрын
I lubricate everything it doesn't always make the video. Ya I know, thanks for watching
Another Great restoration job well done.
@TheKinzlerBros
17 күн бұрын
Thank you very much!
Bravo 👏, another superb restoration 👍👍💪🏼💪🏼
@TheKinzlerBros
18 күн бұрын
Thank you very much!
Nice 👍👍
@TheKinzlerBros
5 күн бұрын
Thanks 👍
Hi Brandon , Another superb piece of firearm restoration , more history saved , loved the rubber glove finger clicking , you are a true master , if it was an Olympic sport , you would be a gold medalist ! Thanks for posting , always enjoyed immensely .
@TheKinzlerBros
17 күн бұрын
You are so kind sir, thanks we appreciate your support Pete!
the pistol used by the paratroopers as they defended themselves in the church OPERATION ANTHROPOID
@TheKinzlerBros
14 күн бұрын
Thanks for the info, didn't know that! Thanks for watching
You´re an artist ! It is incredible what you did´t with "precious scrap". big fan and Greets from Germany
@TheKinzlerBros
18 күн бұрын
Thank you for the kind words, we appreciate your support!
@saschadomek8079
18 күн бұрын
@@TheKinzlerBros Do you have any news group to point question? For example size of glass bead you use. best regards
Very nice restoration on an old colt, darn gun is older than me lol.
@TheKinzlerBros
18 күн бұрын
Thank you, You would be really old if you were older than it! Thanks for watching
Fantastic, beautiful 😊
@TheKinzlerBros
18 күн бұрын
Thank you, thanks for watching!
ah ,M Browning what can you say, nice rebuild of the 38super.
@TheKinzlerBros
17 күн бұрын
Right! Thanks for watching
Hot booling looks gun clean and accurate well done
@TheKinzlerBros
13 күн бұрын
Yes it does, thanks!
Very interresting old gun. Your gunsmith job is amazing. I wait about your videos every month. Thanks for this moment. A french gunner
@TheKinzlerBros
18 күн бұрын
Yes it is, thank you very much! We appreciate youf support! Thanks for watching
Excellent restoration/conservation work (as always). You never disappoint with your professionalism, and attention to detail. Now that your including the voiceover with the vids, is also a great idea.
@TheKinzlerBros
18 күн бұрын
Thank you for the kind words we appreciate it, glad you like them. Thanks for watching
Great job on the restoration, pity the rifling was so far gone. 👌👌👌❤️
@TheKinzlerBros
17 күн бұрын
Thank you very much, ya for sure!
Greetings from Italy guys. I love your restorations.
@TheKinzlerBros
18 күн бұрын
Thank you very much! We appreciate you watching!
Glad y'all are back. Been hoping nothing was wrong. I always look forward to your next video. I always learn something from each video. The videography, narration, and notes all contribute to the top quality of every video. Please keep the content coming.
@TheKinzlerBros
18 күн бұрын
Ya we wish we could put more videos out but, it takes time and we still have a full time job. Thank you we are glad to hear it. Thanks for watching we appreciate it!
Gerçekten bravo usta❤
@TheKinzlerBros
18 күн бұрын
Thank you very much!
Nice job! Beautiful gun!!
@TheKinzlerBros
17 күн бұрын
Thanks, thank you for watching
Excellent job!
@TheKinzlerBros
18 күн бұрын
Thanks
Amazing handgun restoration technology. It's a Colt handgun, after all. By the way, are you a gunsmith?
@TheKinzlerBros
18 күн бұрын
Thank you very much we appreciate it, not a certified gunsmith. Thanks for watching
A really good restoration as always, really liking the way the videos are improving 👍👍👍👍👍
@TheKinzlerBros
18 күн бұрын
Thanks, we appreciate the feedback!
Excelent restoration men colt The best
@TheKinzlerBros
17 күн бұрын
Thank you very much! Thanks for watching
Amazing as usual!!!!!!!!!!!!!!!!!!!
@TheKinzlerBros
17 күн бұрын
Thanks again!
Perfect work, congratulations my friend. You gained a subscriber. Mother of strength too, thank you.
@TheKinzlerBros
13 күн бұрын
Thanks we appreciate the support, awesome! Thanks for watching
Nice looking pistol. It looks like somebody probably carried that thing every single day for a very long time. I wonder how many rounds it took to wear out the barrel like that? From the sounds of it, it seemed like the bullets were tumbling when they left the barrel at least half of the shots you fired.
@TheKinzlerBros
18 күн бұрын
Thanks, I like it too. It takes so many clips to make a bore smooth like that. Thanks for watching
Why not replace barrel? With all the work you did. This would be such a nice weapon with rifling
@TheKinzlerBros
3 күн бұрын
Ya I probably will, thanks for watching!
Great work
@TheKinzlerBros
11 күн бұрын
Thanks!
i have one of these mint my carry gun thanks dad
@TheKinzlerBros
18 күн бұрын
That's a nice family heirloom. Thanks for watching
Love the videos. I like the restorations but watch mostly to see how to disassemble/reassemble the guns. Thanks
@TheKinzlerBros
18 күн бұрын
Thanks we are happy to hear it, ya that is the interesting part! Thanks for watching
Mais um vídeo excelente, com um trabalho de restauração magnífico! 👍🏻☺️⭐⭐⭐⭐⭐
@TheKinzlerBros
15 күн бұрын
Thanks Marcio, see you on the next one. Thanks for watching!
Is there anywy to restore the rifling in the barrel? I've seen people mig weld a bore and machine it down but I don't know if that's an option in this application.
@TheKinzlerBros
9 күн бұрын
You can resleeve it but, not sure if you can fix it without doing that. Thanks for watching
не знаю как вам) а по моему очень красивый пистолет) в плане инженерном, необычный он!
@TheKinzlerBros
17 күн бұрын
Ya it's a great gun, just a design flaw. Doesn't have a slide stop, so if the take pin breaks the slide will fly off!
Love your guys videos! That was a really good video! What a cool restoration.
@TheKinzlerBros
16 күн бұрын
Glad you enjoyed it! We really appreciate your kind words and support! Thanks for watching
Спасибо за работу! Красивый пистолет. P.S. Бронзовый боёк - это интересно...
@TheKinzlerBros
15 күн бұрын
Your welcome, thanks for watching we appreciate it. Ya I didn't know till I had to replace this one
A great job saving a fine old firearm. Did you glass bead the inside of the magazine too ?
@TheKinzlerBros
17 күн бұрын
Thank you, yes I did. Thanks for watching!
Klasse Job echt Gut 👍👍👍
@TheKinzlerBros
18 күн бұрын
Thank you very much we appreciate it!
Cool video. Use a brass punch to avoid damaging the metal.
@TheKinzlerBros
18 күн бұрын
Thanks, they are they are just coated. Thanks for watching
Хорошая работа. Спасибо за контент
@TheKinzlerBros
17 күн бұрын
Thank you, thanks for watching!
Excellent video. I always look forward to your next one.
@TheKinzlerBros
15 күн бұрын
Thanks Robert we appreciate the support. Thanks for watching!
Nice restoration work again. It’s impressive the way you save these firearms. And good aim with a smooth bore pistol……lol
@TheKinzlerBros
18 күн бұрын
Thanks we appreciate the kind words, ya it wasn't too bad. Thanks for watching
I hope not too many mouses had to suffer to get that amount of mousemilk out of the mouses
@TheKinzlerBros
18 күн бұрын
Haha right! It's a weird name for a penetrating oil. Thanks for watching
Great job on the restoration, it really came out nicely! I also enjoy your commentary, it really adds to the video. Keep up the good work!
@TheKinzlerBros
17 күн бұрын
Thank you we appreciate it, thanks for the feedback. Will do, thanks for watching!
Хорошая работа. Надо было боек из стали заказать.
@TheKinzlerBros
15 күн бұрын
Thanks, ya it was. It is made out of bronze. Thanks for watching
Nice job ! Your restorations are always worth watching and a pleasure to do so. Btw... is the hot-blueing solution useable twice or more ? Greetings !😊
@TheKinzlerBros
17 күн бұрын
Thanks we appreciate the kind words and support. You can but we don't. Thanks for watching
Superb video as always... but im more preferring asmr video like before... no talking just some subtitle will do...
@TheKinzlerBros
18 күн бұрын
Thanks we appreciate it, thanks for the feedback and for watching!
I was going to watch this earlier but had diarrhea... again. So I watched it now. Thanks for restoring.
@TheKinzlerBros
17 күн бұрын
Didn't need to know that part but, we appreciate you watching! Thanks for the support
Damn good work! 👍🏻👍🏻
@TheKinzlerBros
18 күн бұрын
Thank you, thanks for watching!
Awesome video!!
@TheKinzlerBros
18 күн бұрын
Thanks!
Nice restoration. It really needs a new barrel though.
@TheKinzlerBros
16 күн бұрын
Thanks, yes it does. Thanks for watching
You're amazing!
@TheKinzlerBros
18 күн бұрын
Thanks we appreciate it!
Nice
@TheKinzlerBros
18 күн бұрын
Thanks
Well done guys are you going to look for a new barrel? You have inspired me to try a restoration on a very old double barrel shotgun I don't know if I will tape it for my channel or not we'll see thanks for sharing this enjoyable video with us six stars my friends
@TheKinzlerBros
17 күн бұрын
Thanks Joseph, ya probably. Good luck on your restoration. Thanks for watching!
This is such a cool channel. Digging the voice over. Not overdone, concise and on point.
@TheKinzlerBros
18 күн бұрын
Thank you very much we appreciate the feedback. Thanks for the kind words and for watching!
Naysss
@TheKinzlerBros
18 күн бұрын
Thanks
That bluing came out great. Looks like frigging powder coat.
@TheKinzlerBros
18 күн бұрын
Ya it worked great, thanks for watching!
I just have only one request please like can you do the voice over only at the begging and at the ending beacuse i watch it at night and i like to geare the asmr of that gun sounds and ectt like you can add as much as you want in the begging but not in between please but hey love your content king
@TheKinzlerBros
12 күн бұрын
Thanks for the feedback we appreciate it, thanks for your support of the channel!
You could always buy another barrel if you want to make it a shooter.
@TheKinzlerBros
15 күн бұрын
Absolutely, thanks for watching!
Need to polish up the feed ramp a bit.
@TheKinzlerBros
6 күн бұрын
I think it wasn't ejecting the spent round fast enough but, that wouldn't hurt. Thanks for watching