Thanks for sharing Clara. I’ve been looking for something to do with my left over resin. This is perfect!

@ClaraLawrence

3 жыл бұрын

You are very welcome. Thanks for watching. I'm always looking for a practical way to use my left over resin. I'm happy to share.

Thank you for making this! I’m using resin tape for the first time and this is going to be so helpful!!

So pretty ! Just ordered the set from amazon! Thanks for showing how to do this !

@ClaraLawrence

3 жыл бұрын

Thanks. They are easy to do. Have fun.

Super cool! Thanks for being a good teacher :)

@ClaraLawrence

3 жыл бұрын

I try. But it is good to hear that you think I'm a good teacher.

How fun! I have a bunch of there sitting here. You have inspired me to use them next time I resin :)

@ClaraLawrence

3 жыл бұрын

Thanks. That's great. Share when you do. Would love to see them.

Beautiful! 😍💕

@ClaraLawrence

3 жыл бұрын

Thanks so much.

This is a good tutorial thanks!!

Clara if you have pendant were the eye loop is turned use a block of wood to work on that is clamped down just so have it not move. Silver in amethyst great combo luv me some turquoise. These turned out beautiful 👍🏼💜💕

@ClaraLawrence

3 жыл бұрын

Great idea. I love amethyst and silver. That is my favorite combo in jewelry.

I wish you could have shared the final look front and back. These look beautiful.

@dagmaresposito6247

4 ай бұрын

also how she mixed the colors and what she used. I love those!!

I saw a post on another Chanel suggesting to roll over each edge of the tape so you can handle it without getting stuck

These are beautiful. The video was very helpful. Do you doom them when they are cured and if so do you have a video?

Здравствуйте. Очень красивые кулоны получились, спасибо за видео.

@ClaraLawrence

3 жыл бұрын

Спасибо. Я правда ценю это. (Thanks. I appreciate that.)

@galina1970a

3 жыл бұрын

@@ClaraLawrence 🌹🌹🌹

It’s great to see someone with nails like mine 🤪👏🇮🇪

@ClaraLawrence

Жыл бұрын

Giggle. Mine have a huge range of really pretty to OMG did you go out in public with those! Life of an artist.

So pretty

Thank you ❤😊

These are so beautiful! I am so thankful for this video. I recently did some resin pendants and no matter how well I pressed them down on to the tape they still continued to leak out the sides. Not sure what I'm doing wrong but I'll keep trying.

@ClaraLawrence

3 жыл бұрын

Thanks. These bezels come with tape. In fact I placed the bezels so close together that I have plenty of tape left over. The tape worked excellent. I have a link in the description for these bezels, but I will put it here too for you. Open Bezels - amzn.to/333bCJf Teardrop Open Bezels - amzn.to/2F69LeG

@watchindeegan

3 жыл бұрын

@@ClaraLawrence I already have several bezels, I'll see if I can purchase that tape separately. Thanks Clara 😍

@ClaraLawrence

3 жыл бұрын

@@watchindeegan I looked and found this. It looks like the same stuff that comes with the kit. amzn.to/36vjWVt

@rachellebabb3151

3 жыл бұрын

I use silicone pads and just press the pendants down firm and then fill will resin works great works so much better than tape

Hi how do you clean off the tape adhesive off ???

@ClaraLawrence

Жыл бұрын

Try Goo Gone. Here is my affiliate link amzn.to/3PVuhhm

Can someone tell me how to get the sticky tape residue off the back of the pendent? There always seams to be residue when I use the tape.

@ClaraLawrence

Жыл бұрын

Try goo gone. Here is my affiliates link amzn.to/3oRcQTa

YOUR OPEN BEZELS ARE SO PRETTY!!!! I am mainly using dried botanicals in my open bezels. I have had a few overflows and or leakage under the tape. What do you suggest to get that resin off? I am afraid the Dremil tool will be too much vibration and worried I may scuff the outside of the bezel. Any suggestions.? Looks like you have some awesome video tutorials. Can't wait to watch those too.

@ClaraLawrence

Жыл бұрын

Thanks. Try to carefully pry it off with an xacto knife. Be super careful as they are really sharp. Acetone applied carefully with a Q tip might soften it enough to peel off. The only thing I don’t know is if it would take any finish off your bezels.

@tanisclifton8496

Жыл бұрын

@@ClaraLawrence Thank you so much for your reply. I will try that!

Hello Clara, thank you for sharing your techniques. I was looking for the bezels you used in the video. The bezels in the amazon links above are different from the ones in the video. TIA.

@ClaraLawrence

3 жыл бұрын

Thank you for watching. Ok, this bag was a mixture coming from 2 sources. One of them isn't available anymore. Sorry. Here is one source from Amazon affiliates link. amzn.to/2K3fcxC.

@elainedsa7571

3 жыл бұрын

@@ClaraLawrence Thank you. :-)

Great

@ClaraLawrence

3 жыл бұрын

Thanks. I appreciate that.

Good ideer ❤️🇩🇰

@ClaraLawrence

3 жыл бұрын

Thanks. I appreciate that.

Hey Clara, Thanks for this video. I've been having issues with my resin being sticky on the side where the tape is after it's fully cured. Do you have that problem with this tape? I've tried aluminum tape and I've tried packing tape and have the issue with both of those. Other than that my projects turn out great. But I can't sell to customers until I figure this out and don't know what to do. I even bought some goo be gone type stuff to get it to stop being sticky and it didn't work. I even put it out in the sun and some of them stopped being sticky and some were still sticky. I just don't know what to do to solve this problem.

@anyabajaj07

3 жыл бұрын

You can add a additional thin layer of resin on the back.It gets rid of stickiness

Can regular tape be used🤔🤔🤔

Some of those bezels look like Nunn Design bezels. Nunn bezels are my favorite.

Hey Clara I tried making pendants using this technique yesterday. I wanted clear resin pendants with some flowers but the back side of the pieces which was stuck to the tape turned hazy. Can you help me fix it

@ClaraLawrence

3 жыл бұрын

I would sand the hazy side very carefully (just to put a few scratches on to the resin so the next layer can bond well), then put a small amount of resin on top of that. Let that cure. It should go into the cracks and make the hazy (texture of the tape) go away.

Hi, how do you clean/take off the blue glueish film that the tape left on the pendant/resin??

@ClaraLawrence

Жыл бұрын

Goo Gone. Here is my affiliates link amzn.to/3zsO94h

Thank you, just to ask do you dome them at the end🤔?

@ClaraLawrence

Жыл бұрын

Yes, but I usually put so much in that I don't need to.

how is your tape not curled. mine doesnt stay down therefore not laying flat.

@ClaraLawrence

2 жыл бұрын

I've been lucky that it hasn't curled. I would probably start with taping down the edges with regular tape and go from there.

@DUMBSKYM

Жыл бұрын

Hey folding the ends of your tape over a bit. It gives you something to hold when working and help the rolling.

Desperately trying to find the same bezels that you use as they are chunky and have a nice patina. Please, if anyone finds them anywhere can you post the link? Thanks x 😘

@Navillus02

3 жыл бұрын

Also looking for the thicker metal like in the video. The link that's given goes to different items.

@ClaraLawrence

Жыл бұрын

Here are the ones I used. This is my affiliate link amzn.to/3QgdoNX

HELLO another suggestion take a smaller one and put inside a bigger one and just fill the outer ring only once its dried add a pic of anything to the inside. Just remove the inside ring off the middle one.

@ClaraLawrence

3 жыл бұрын

That is a good idea. I will have to find a ring without the loop for hanging.

We can work without bezel tape? We can use normal tape for UV resin work?

@ClaraLawrence

Жыл бұрын

I've only used the bezel tape. But I bet thick shipping tape would also do.

It is necessary to use uv resin tape is there any alternative? Of tape

@ClaraLawrence

Жыл бұрын

I've always used this tape, but I would try heavy shipping tape as another option. It's worth a try.

what kind of pigments did you use for these?

@ClaraLawrence

3 жыл бұрын

I use a variety of pigments meant for resin. All my colors I get from Artist Till Death. Use code "howdy" to get an additional 5% off. artisttilldeath.com

Good Day Clara, what a great lesson this is! I'm learning so very much! Your so inspiring and freely share your talents with us! I appreciate you so very much, thank you for opening my eyes to so many different Art projects! Sending positive vibes your way. Peace love dream's 🇨🇦! 💞🌐📷📽️⭐⭐⭐⭐⭐⭐⭐⭐⭐💯🌅🌏💜🌎💙🌍🌄🕊️💕🌌😉

@ClaraLawrence

3 жыл бұрын

Thanks. I've had others that have shared with me, so I am just passing on what I know too.

When do you remove tape?

@ClaraLawrence

Жыл бұрын

No sooner than 24 hours for most epoxy, but UV can be removed a lot faster if it is already cured under a uv light.

What kind of tape are you using

@ClaraLawrence

3 жыл бұрын

It is the tape that came with the kit. I have used strong shipping tape too.

Tried to use this technique but for some reason my resin tends to seep through the bottom 😞

@ClaraLawrence

Жыл бұрын

Oh no! Sounds like the seal wasn't strong. So sorry.

I should have seen this video first. I kept the non sticky side of the tape on the top 😢

@shirleyn546

9 ай бұрын

I’ve just watched a KZread video of someone using epoxy resin as clay..letting it cure for a while, then with gloves on, rolling it up and moulding it into the bezel. If you’ve not thrown your disaster, you could try this? She made her own bezels with copper wire. They were really good. I’m new to resin, so I’m learning from my mistakes.

@GardenStudioGoa

9 ай бұрын

@@shirleyn546 oh sure I'll try that

Trop long

Hi how do you clean off the tape adhesive off ???

@ClaraLawrence

Жыл бұрын

Try Goo Gone. Here is my affiliate link amzn.to/3PVuhhm