Thank you so much for the tip on epoxying the top of the keychain after the epoxy in the mold had cure for a smooth top! I made a bangle and totally never thought about doing that. Merry Christmas to you and your family.

i love the mylar pieces added and the tip to tap the mold on the counter to remove bubbles !

I love the pink glittery, fancy look of these keychains. They would make beautiful purse charms. Thank you for the ideas.

@FlynnSistersBoutique

2 жыл бұрын

Thanks for watching!

Merry Christmas!!!! Best wishes for you and your family. These key chains are so adorable!!!!!🥰

Merry Christmas! I truly appreciate your contribution to the tumbler community. You’re an inspiration!

@FlynnSistersBoutique

3 жыл бұрын

Thank you! You too!

So cute! Love it! Every video you make I always learn something new. Merry Christmas to you and your family!😊🎄❤

Thank you for posting. I just got my kit and will be trying resin for the first time.

Super cute Jessica! Thanks for sharing and Merry Christmas to you and your family🎄🎄

Super cute! Merry Christmas to you and yours!! Thank you for all you do for all of us! 🎄

@FlynnSistersBoutique

3 жыл бұрын

Thank you! You too!

Merry Christmas and thank you for all you do for us! Enjoy your family and see you next week!!

@FlynnSistersBoutique

3 жыл бұрын

Our pleasure! Merry Christmas to you too!

I love these! I bought this mold at Michael’s a long time ago, but I’ve never used it. I need to buy some keychain hardware and make these!!!! Thank you for sharing!!!

Dude! I'm obsessed. Got mine poured and ready to go. Have a Merry Christmas ☃️ see you next week.

I just bought this mold so I'm so excited that you did this video!!

@FlynnSistersBoutique

3 жыл бұрын

Awesome! Thank you for watching ☺️

Love your videos! Thank you for sharing your knowledge. Merry Christmas to you and your family!

@FlynnSistersBoutique

3 жыл бұрын

Same to you! thank you!

Adorable keychain! Thank you Jessica! Wishing you and family a Blessed and Merry Christmas!🎄 🎁 🎄 ❤️

@FlynnSistersBoutique

3 жыл бұрын

Thank you! You too!

So cute! Need to get some of the fluff pieces!

Super cute!! Thanks for the tutorial! Can’t wait to try 💕💕💕 Merry Christmas ❤️

@FlynnSistersBoutique

3 жыл бұрын

Thank you! You too!

Merry Christmas to you and your family. Thanks for all great videos you do and looking forward to seeing more in 2021.

@FlynnSistersBoutique

3 жыл бұрын

Same to you! thank you!

So adorable. Also love the trick with torching the dental pick, now I don't have to drag out my Dremel. This is why you're my favorite epoxy artist❤

@FlynnSistersBoutique

3 жыл бұрын

Thank you! 🙌

I hope you and your family have a Merry Christmas! And thank you for the hardware links! Ive been needing to get new hardware for my keychains!!

@FlynnSistersBoutique

3 жыл бұрын

Thanks, you too!

Love this. I always learn something new. Thanks you! Merry Christmas!

@FlynnSistersBoutique

3 жыл бұрын

awesome! thank you and Merry Christmas to you too!

You make even the simplest creation look so spectacular! :)

@FlynnSistersBoutique

3 жыл бұрын

Thank you! 😊

Such a good tutorial ! These are adorable ! Thank you ❤️

@FlynnSistersBoutique

3 жыл бұрын

Thanks so much! 😊

So cute 😍 perfect stocking stuffers....Merry Christmas 🎄 Jessica enjoy your time with your family!

@FlynnSistersBoutique

3 жыл бұрын

Thank you! 🤗

Merry Christmas to you and your family ❤️ The keychain came out super cute. Thanks for the video.

@FlynnSistersBoutique

3 жыл бұрын

Thank you! 🤗

Merry Christmas and thank you for all you do!

@FlynnSistersBoutique

3 жыл бұрын

Thank you! same to you!

So adorable!

Merry Christmas 🎄🎁!!! Peace & Blessings❤️🙏!!

GREAT video! I have the same mold and ran into issues of the back of the letter having a curve to it. And a hard time getting the eye hook in the letter. These tips help a lot!! Thanks!

Merry Christmas 🎁🎄 enjoy your family.

Love the idea of heating up the pick. I have jewelers bits but it’s hard to get it started. Great video. Happy holidays and Merry Christmas!

@FlynnSistersBoutique

3 жыл бұрын

Thank you! You too!

Thank you for all the step by step and tips. Great tutorial. 😊

@FlynnSistersBoutique

2 жыл бұрын

Thank you

Great tutorial. Your explanation on making sure the eyelet loop doesn't break off while screwing it in makes perfect sense, especially if you are experienced with breaking them off when screwing them in, like I am! LOL!

Awesome! Merry Christmas to you and your family as well!

@FlynnSistersBoutique

3 жыл бұрын

Same to you! thank you!

Super cute!!!

Fun and so cute!

Amazing! Beautiful work

@FlynnSistersBoutique

3 жыл бұрын

So glad you enjoyed it 🤩🙌

Merry Christmas to you & your family. I pray your Christmas be filled with blessings, peace, love & happiness .

@FlynnSistersBoutique

3 жыл бұрын

Thank you 🙏 same to you!

Great video! Merry Christmas

The faux Pom poms I ordered on December 24 and got them today. Was prepared to wait months. Woo. Guess they stepped up their game. They are so pretty

So cute!

Merry Christmas girl, to you and your fam. I hope y’all have an amazing weekend. And I’ll be looking forward to Wednesday. Lol

@FlynnSistersBoutique

3 жыл бұрын

thank you so much! same to you!

Merry Christmas!! 🎄🎄🎄

Merry Christmas to you Jessica and your beautiful family.

@FlynnSistersBoutique

3 жыл бұрын

Same to you! thank you!

love it🎀 ❄️merry christmas sweetheart!❄️

Suler cute! Merry Christmas to you and your family!

@FlynnSistersBoutique

3 жыл бұрын

Thank you! You too!

Merry Christmas to you and yours as well.

@FlynnSistersBoutique

3 жыл бұрын

Same to you!

Love your video . Thank You for shareing

That heated picker idea is great, I feel so duh because I use a jewelry drill. Merry Christmas!

@FlynnSistersBoutique

3 жыл бұрын

Thank you! You too!

Very cute!! Thanks for sharing how you add the hardware, my hubby does mine. LOL Merry Christmas!

@FlynnSistersBoutique

3 жыл бұрын

Thank you! You too!

I always use a power drill with a tiny drill bit and a little super glue...this looks way easier! Thank you!

@FlynnSistersBoutique

3 жыл бұрын

thank you :-)

Merry Christmas 🎄

Merry Christmas my beautiful friend♥️♥️

TU again for such a fine tutorial. I have that mold and like to see it filled before I use it. ❤

@FlynnSistersBoutique

3 жыл бұрын

Thank you

I'll be making some resin letters soon❤❤ Great video doll✌✌

@FlynnSistersBoutique

3 жыл бұрын

thank you!

Thank you, love making theses and giving to First Responders . Great Job. Can you also do a video in cleaning supplies.🌹

Merry Christmas!!!!

This was a great tutorial thank you!

@FlynnSistersBoutique

2 жыл бұрын

Thank you for watching!

Omg this tutorial just saved me thank u

@FlynnSistersBoutique

2 жыл бұрын

Glad it helped!

Love how these turned out! I think my eyelet screws might be too big, all my letters have split. Merry Christmas

These are sooo cute! TFS and MERRY CHRISTmas 🎄 xo Melissa

@FlynnSistersBoutique

3 жыл бұрын

Thank you! You too!

So cute 💖💖💖💖💖

Merry Christmas. 🎄.

@FlynnSistersBoutique

3 жыл бұрын

Same to you!

MERRY CHRISTMAS 🎅 🎄 ❤

Helpful! 🙏🏻

Merry Christmas to y’all!🎄🎅🏼 Yep totally used the crappy hardware that came in the kit, and I had 3 pieces break off in my letters.😂 Love the doming technique! I always feel like the back on my letters look so drab compared to the front. How long did you mix your epoxy for, I noticed you didn’t really have any bubbles?

Merry Christmas to you

Nice & ty

Thanks for the tips.What advise can you give.My pieces crack after sometime when screws are been placed in

Pretty alphabet keychains!! I wasn't succesful getting the eye screw in and the hole I drilled was tiny but a bit too large. I plan on filling it in with resin and insert the screw.

@FlynnSistersBoutique

4 ай бұрын

Thank you!

Do you use a different color eye screw and jump ring with different colored key rings?

I’ve seen this type of spoon stick being used. What is the name of it so I can use one? I heard it works better with mica powders and glitters?

Omgee I never thought to heat up my picker tool! I’ve had so many screws heads break off bc I was trying to gently heat the epoxy and shove the screw in and twist 🥴 Thank you so much! Merry Christmas!🎄

@FlynnSistersBoutique

3 жыл бұрын

hope this helps! thank you!

Hii. I’m new to the epoxy world and was wondering how long did you let the epoxy with glitter rest in the cup before pouring? All your videos are so professional and freakn amazing!

@FlynnSistersBoutique

3 жыл бұрын

I set a timer for 5 minutes usually. thanks!

Thank you

@FlynnSistersBoutique

3 жыл бұрын

🙌

What size screw eye pins/ jump rings are you using for your Alphabet keychains. The link doesn't go through. Also do you match it to your key ring or are you just using silver? Thank you!!

I'm new to this the only epoxy I have is the amazing clear cast part A AND B so would it be hard and half ?

@FlynnSistersBoutique

3 жыл бұрын

that is correct. Half B and Half A. Add side B to your measuring cup first then add equal amount of side A and mix until totally clear

I tried diy epoxy and I'm totally hooked! Have you tried the new fast set or are you planning on trying it?

@FlynnSistersBoutique

3 жыл бұрын

yes, my video on the 30th will feature it! I love it!

@monicafrance5150

3 жыл бұрын

@@FlynnSistersBoutique I've heard good things! I think I'll get some!

I don’t understand the doming part with clear epoxy. Are you just filling it in? Love your videos! Thank you!

@FlynnSistersBoutique

3 жыл бұрын

That is correct. so the back won't be completely smooth like the front is so the doming just smooths out the back for a more professional finish. thanks for watching!

I love how you explain your keychains.

Omg loved the torch idea to make the hole on the key chain I struggle a bit with the hand drill

Hey! My initials are CJ! They are so pretty.

Thanks for the tut. Question: you suggested to mix 20 ml...but you had lots left after doing the J...do you know how many letters you can do with 20mL? And can you use uv resin to dome coat the letter. Just making the finishing process quicker? Will the two resins hold together? How much would you sell this keychain for? Thanks so much.

@FlynnSistersBoutique

3 жыл бұрын

I do not know the exact measurement but you can test that by measuring water in there first and measuring the water. I mixed 20 to be on the safe side. You can use fast set for the finishing and it will bond fine to the regular. I don’t know how much I’d sell this for but I’d maybe check prices with similar products on Etsy and go from there

@lauraandrews8072

3 жыл бұрын

@@FlynnSistersBoutique Thank you...appreciate the great reply. HUGS

Does resin need special glitter or can you use regular store bought glitter??

@FlynnSistersBoutique

Жыл бұрын

Store bought is fine!

I really want the letter R keychain

Why did you spray with the 91 percent alcohol ?

Which epoxy did u buy from the alumilite.please

@FlynnSistersBoutique

2 жыл бұрын

Amazing clear cast formula for this

Do you wear a respirator when you do small little projects like this?

@FlynnSistersBoutique

2 жыл бұрын

I use PPE any time i work with epoxy

@sabrinacaldwell696

2 жыл бұрын

Thank you so much for responding! You truly make the most beautiful tumblers and cute accessories! Love your channel!

When do you screw the eye hooks in? Mine keep cracking a few hours after screwing in the hooks /: I don't know what I'm doing wrong

@FlynnSistersBoutique

3 жыл бұрын

The epoxy is cracking? What kind of epoxy are you using and how thick are you pouring

Oi, parabéns pelo trabalho. Qual o nome do equipamento que você usou para acabamento? É um bisturi? Beijos

@FlynnSistersBoutique

2 жыл бұрын

Thank you. I'm not sure sure what equipment you are asking for. I used a blade to clean my edges and pliers to attach my harware. All of my materials are linked in the description box of my tutorial.

Do we need to add hardener in resin first ?

@FlynnSistersBoutique

2 жыл бұрын

This epoxy requires that you mix equal parts of the resin and hardener. Typically you’ll pour the thicker viscosity part into the thinner one so it’s easier to mix but you can mix it however you want to

How do you clean the molds

@FlynnSistersBoutique

Жыл бұрын

Play doh works well to remove glitter. You can use tape also.

I have 1 to 1 ratio resin and I don't know how resin and how much hardener to put in separate cups

@FlynnSistersBoutique

2 жыл бұрын

Equal parts. Example, if you put 10ml of part a in one measuring cup you put 10ml of part b in the other and then mix them together. Equal parts of a and b.

does the resin have to cure at any specific temperature?

@FlynnSistersBoutique

3 жыл бұрын

most have a temp range that they prefer. You'll want to reference your epoxy's data sheet for that info. Usually it's between 70-75 degrees

Get a small torch you have more control of the heat go look at my dominoes short I did to demonstrate taking out the bubbles with a torch

@FlynnSistersBoutique

9 ай бұрын

Torches can damage the silicone molds. I use alcohol on these to prevent bubbles and avoid damage. I use a propane torch when not working with silicone.

Can you use a heat gun instead of a torch to pop the bubbles?

@FlynnSistersBoutique

3 жыл бұрын

yes, just don't apply too much heat.

would using a heat gun be fine instead of a blow torch ?

@FlynnSistersBoutique

3 жыл бұрын

yeah that'll work. you just can't keep the heat on it for too long

So I just started doing these, my problem is, I can get the bubbles at the surface. But I can’t get the bubbles towards in the middle of the resin. How do I get all the bubbles out? I’ve used a heat gun and a lighter, the middle bubbles just won’t come out. What do you recommend?

@FlynnSistersBoutique

9 ай бұрын

Warm your epoxy well before mixing. That will help prevent bubbles. Using a metal stir stir vs wood. Mix slowly. Wait a bit before you pore to allow any bubble to rise to the surface and pop.

@BreasCraftyCrafts

9 ай бұрын

@@FlynnSistersBoutique I will try that! Thank you 😊

I'm new at resin crafts. I make really nice pieces I use uv resin and it seems like some of my molds come out sticky. I let it sit u see the light for about 1- 2 minutes but they continue to be sticky sometimes not completely dry in a small spot. What am I doing wrong🤷🤷? Help ...🙏🙏

@FlynnSistersBoutique

2 жыл бұрын

Some UV resin can’t be poured that thick. Try a higher watt lamp and do it by thinner layers. Also, even with a good lamp and the best UV resin, 3-5 mins for the final cure is a pretty standard time for me

Where can I find the link for the materials?

@FlynnSistersBoutique

2 жыл бұрын

All my materials are linked in the videos description box