Resetting a pull station, dream, vs nightmare | BG-10 VS BG-10L
Ғылым және технология
Exactly the reason to not buy a BG-10 pull station 😂
My Instagram:
/ safetysecur. .
If y'all are interested in hiphop music, check out my SoundCloud page!
/ user-50891191
Пікірлер: 69
I got a BG-10, painfully accurate.
this why i prefer keys over screws.
@ConrailGeep
3 жыл бұрын
yep
As a person who has pulled and reset a BG-10 i can confirm it’s a nightmare
So basically, the BG-10L is better than the BG-10.
@SafetySecurityAlert
3 жыл бұрын
At least I think so
@Sinxytlol3
2 жыл бұрын
@@SafetySecurityAlert where can I find the bg 10 l with key
@jzzhang726
2 жыл бұрын
Yes bg 10 sucks
@calebculwell7340
Жыл бұрын
Yes
*shortly later he became a service tech and got to rip them out with hammers and lived happily ever after*
@Slektus
3 жыл бұрын
True
If I ever become a technician and I’m inspecting a building with BG-10s, I’ll make sure I have a box full of brand new BG-12s right next to me just in case👌
Yooooooo I actually laughed so hard😂😂😂😂
@SafetySecurityAlert
3 жыл бұрын
🤟😁
@bottlerat2318
2 жыл бұрын
not funny
Honestly that the BG10 (Hex reset) is one of the worst pull stations of all time. This is behind the The Ademco 529 pull station and Edwards 78 which are disposable pull stations.
@SafetySecurityAlert
3 жыл бұрын
Yup lol
I have a BG10 Halon pull, and it takes SO LONG TO RESET
My cousin’s autism clinic used to have BG-10 pulls. But they got replaced with the BG-12 pulls! I feel like fire pulls are always replaced with FireLite BG-12s!
ok but why is this so true, this is why i hate buying non key to reset pulls!
I saw one of safetechs inspections full of bg 10s. They took an eternity to reset and on top of that they are so cheap that if you tighten it too much the pull is toast.
@SafetySecurityAlert
3 жыл бұрын
100 percent accurate
@LoyalmoonieProductions
7 ай бұрын
And you could get a false alarm with that!
Hehehe I have a bg-10 on my system rn. The screw is just loose so i can pull it open just enough for the handle to go back up
Fun n games until you accidently make the screw too tight and the plastic breaks.
I got a BG-10 that’s coming, it thankfully and fortunately has a key lock and not a hex lock.
Thats why you should use a drill to open or close it and also why I have a 4251 20
Man actually spent 1 minute and 31 sec to reset bg10 lol
I just added a BG10 to my collection that has a screw and a washer in the front.
After turning the screw for 28 hours, Luca left the pull station and...It falls open and the alarms goes BEEP BEEP BEEP again
It's true lol
The BG-10L is better because it's the quickest way to reset with the key.
@SafetySecurityAlert
3 жыл бұрын
Agreed
And this my friends is why bg10s don't exist anymore.
@SafetySecurityAlert
3 жыл бұрын
The main reason was because of the faulty button but your right.
me: *starts swearing up a storm*
after he saw BG-10 he used a bulldozer to smash it
@SafetySecurityAlert
2 жыл бұрын
HAHAHA!
I’ve ripped out so many of them in the field. Nice pull station for collectors, but they are junk.
@SafetySecurityAlert
3 жыл бұрын
I think they look pretty good but they are faulty and don't function very well.
@SomeDudeWithAnExitSign
3 жыл бұрын
If you think the BG10s are bad. Take a look at The Ademco 529 or the Edwards 78. Those are horrible pull stations.
@calebculwell7340
Жыл бұрын
The only bg-10 I think is crap is the ones with the screw on the front, the ones with the key locks on the side are the best ones
As someone with both a hex and key lock version of the bg-10 . I completely identify with this
BG-10s are torturous, but have you tried to open a 270-SPO without a proper screwdriver? what about trying to close one with a broken spring?
@SafetySecurityAlert
3 жыл бұрын
OHHH yes believe me. I have a 270-SPO where the screw spring thing is stripped it sucks.
@SomeDudeWithAnExitSign
3 жыл бұрын
At least the 270SPOs are made in metal unlike the BG10s.
@SafetySecurityAlert
3 жыл бұрын
@@SomeDudeWithAnExitSign True
Everything about this is factually accurate
@SafetySecurityAlert
3 жыл бұрын
HAHA yep
One day, I will run myself into a BG-10, and should one break I will replace it with an EST 278B-1120.
So true.
It's weird that he hast to take a long time turning the hex
Looks like you're getting allowance for fixing fire alarms.
true
Very true
This is true...
This is why people should not get the bg 10 with the hex key
@SafetySecurityAlert
3 жыл бұрын
Exactly haha
@SimplexTBarGuy
2 ай бұрын
I have a BG-10 too with the hex lock. I have no problem resetting it and I also had to tighten carefully
The screw model is a peice of crap. Always get the keys.
@SafetySecurityAlert
3 жыл бұрын
Agreed.
I can so relate.
True. XD
1:53 **Sheesh**
😂/😭
BG-10L: 👍 BG-10: 👎
How to make the BG10 faster to reset: USE A DRILL!!!!!
Lol