Replacing Window In a Brick House - The Whole Process
Тәжірибелік нұсқаулар және стиль
If you are looking for a simple guide to replace a window in your brick house yourself, this video guide is for you!
Of course, replacing windows in a brick house could seem challenging. However, if you have the right set of instructions and a little DIY knowledge, you can do it pretty conveniently, without hiring a window expert. Watch this video that guides you through the process using simple, easy-to-understand instructions. You can see that the video also shows you the kind of tools and materials required to conveniently replace a window in a brick house.
Пікірлер: 34
No flashing tape at bottom and sides?
Wow! You just did what I am about to do in the home studio I am building! Thanks for the video!! This will certainly help this rookie carpenter!!
@joe-jet
11 ай бұрын
Glad it was helpful!
I could have swore I was watching it in reverse,interesting steps of installation
Subscribed!
Nice hammer i got the same one works like a charm
I don’t have a bender and wondered if you could have used hardee board for outside instead of aluminum siding…? Thanks for the video
Nice complete video. How would you install a window WITHOUT the capping and wood on the exterior? ie; have the window frame go straight up to the exterior brick. Thanks.
@JOE__JET
5 ай бұрын
You can try to find a local company that will prepare the windows exactly to your size, then you only silicone them to the brick. These windows are usually a bit more expensive than those from homedepot. You can also use PVC trim boards to seal out the gaps.
Why smash it out and damage the interior wall?.
@joe-jet
Жыл бұрын
The edge of the sheetrock was covered by the window casing. Sometimes I also focus too much on recording and not on work 😕
@jlatnyc
Жыл бұрын
IMO the interior damage was minimal. Not a concern at all. Good job on the video
@bondpit8750
8 ай бұрын
Because, he was in a hurry and didn’t have the proper tools.
@bondpit8750
8 ай бұрын
@@jlatnycMinimal perhaps but no need to have damaged it at all. Casing may cover it but there’s still several gaps being the casing that didn’t need to be there.
👍
Have brick on sill for one and sill and one side for other.
Would like to know what was wrong with the old window
@joe-jet
Жыл бұрын
Some of the windows were in disastrous condition. The owner of this house decided to replace them all.
@jimcorn3268
Жыл бұрын
@@joe-jet thanks
You didn't show any sealant in the gap between the rough opening and the window. You're going to let in drafts and noise.
It's the metal bender rentable?
@joe-jet
Жыл бұрын
Yes, at least in my HomeDepot
@jlatnyc
Жыл бұрын
@@joe-jet looked it up. Thanks. Didn't know it's called an Aluminum Brake
To a hammer.... Everything is a nail. What a hack!
My, is that audio wretched....
i would of just cut the frame out...besides destroying the drywall....
@joe-jet
5 ай бұрын
Great! Good to know...
This guy is damaging the Sheetrock. Could have used a better prybar
@joe-jet
10 ай бұрын
Casing covered this 'damage' so there is nothing to dramatize.
@bondpit8750
8 ай бұрын
@@joe-jetthere was no need to damage it in the first place. Better to use composite shims also. But go ahead, keep doing it your way if that works for ya.
@JOE__JET
8 ай бұрын
@@bondpit8750 We can always do something better, faster or cheaper. Every job has its budget. Many people are perfect theorists who would do everything better. I would like to see how they replace 5 such windows a day in real life. In this video I do not teach how it should be done. It shows how I do it.
Hi it's me Joe! If you want to see the new version of my videos please click here: kzread.info/dash/bejne/q31hkrywmdvSYJs.html Sorry for my English, but I'm still learning. YOUR SUPPORT REALLY MEANS A LOT TO ME! THANK YOU!
Too much music no info.
My new channel with shorter videos: kzread.info/dron/qVzbBuV0Ivi_GiQ-xXVo6Q.html