Your the man Mr Martin always taking care of y'all's stuff and saving your business alot of money hats of to ya brother

@DavidZaG-

9 ай бұрын

my hat also sir

The best to both of you. Many blessings

If that's not a revised part it'll fail again. There's a place in grand rapids, mi that peterbilt uses that rebuilds them for $800. The circuit board inside was made poorly. It used to give me transmission fault and not allow the transmission to shift when you put it in manual mode going up and down mountains. You had to pull over and reset the truck to reset it.

@robburns8800

9 ай бұрын

Do know the name of the company

@TruckingTogether

9 ай бұрын

None of them are, they’re all made poorly and still fail. Send me the info if you can if the person that does them. I have a couple that need rebuilt.

@PFeal

9 ай бұрын

​@@TruckingTogetherWeller and in my search look up a place called circuit board medics, they don't for 500

@TruckingTogether

9 ай бұрын

Weller does them?

@PFeal

9 ай бұрын

@@TruckingTogether I believe that was the name of the place they use. I can call Peterbilt in a bit

Take a piece of paper place on top of socket push the screw driver bit into place. It will work also on bolts that keeps falling out of a socket. Old mechanic showed me this trick years ago,

@JohnHallgren

9 ай бұрын

I use a bit of masking or painters tape to hold a couple of screws onto screwdriver for a very inaccessible location when reinstalling the cowling cover over wiper motors on my old car.

Martin, you found a small Sasquatch under there with all that hair😂😂😂

Gr8 Vids & thxs 4 taking everyone along 4 the journey!!!!!😎🔊🔊🔊🔊🔊🔊🔊🇺🇸

Martin you da man!!!!! I love watching you work on the tractors. The stuff you have learned over the years. I would have loved to have learned what you have learned in your life time so far on maintenance with the units. It probably would have kept me out there. Your one of the old school drivers. I take my hat off to ya. I like how you talk and show how it’s done. Great video. Have a safe and a great day. Hopefully soon both you and Alice will be pounding the highways again.

Enjoyed the video. You are one heck of good mechanic.😊😊😊😊

Adds a new meaning to gear jammer!!! 19:35

Enjoying the daily content. Almost 20K subs!

Very good thank you for sharing

Looking forward to see the path forward with Tiny. God Bless TonyJoe

Good job Martin 👍.,. I hope you got a thank you letter from paccar.. for their record profits this year 🎉

@TruckingTogether

9 ай бұрын

Yeah, really lol

I lov e it "not a dust cover" but a "dog hair shield" 😂😂lmao iykyk

Cool video man 👍

Great video. Good lesson on what might be lurking under the dash of our trucks. With that much dog hair I hope you have changed the recirculation filter for the air conditioning. Be safe and best wishes.

You are great teacher you already saved someone $150 +😊

Nice Job !

Watching this ,I am grateful for working on 359,s and w900

great Video

Great video yall i pray l never have to change one. I'm a 18 speed kinda guy lol. Yall take care be safe 🙏.

Heck, I'm gonna be able to build a Peterbuilt from scratch pretty quick! You would make a pretty damn good tech school teacher there Martin! But I think you're probably like a lot of us. I'd rather drive. Be safe and hang in there. Something will come up. (You could ditch Cali and head out here to Wyoming Or Montana.) There's still work to be had for drivers like you two! Take care!!

Martin- Did you watch a You-tube video about how to replace that shifter? Glad it worked. Save the manuals. JM

Alice, Martin.... for sure with that much long dust catchin dog hair up under the cowling..... be double sure to replace your cab air filter and under bunk filter... As well as check the air intakes for recircled air

@TruckingTogether

9 ай бұрын

those were replaced in Part 1 of Failure is an Option if you caught that video, so about 2 weeks prior to this one

@gregprince2523

9 ай бұрын

@@TruckingTogether Outstanding!! those darn dog hairs get in every book n cranny in a closed environment!

Martin, please be careful, using wood blocks to support your truck is so dangerous, years ago as a part time fireman, I had to attend a garage where a guy had his car up on wood blocks, the blocks moved and I and another had to scrap him off the bottom of the car, please use proper stands, stay safe, great vlogs Alice keep him safe, regards John

@JohnHallgren

9 ай бұрын

But I believe that most cars don’t have enough room to be under it without some lifting up while it looks like one can be under these trucks without any added height so the blocks simply give a bit extra room to operate in. Of course that might depend on the body size of the person working on it, but think Martin would still be safe. A video on another channel for a wrecker operator is where there was a similar message. He said even if it dropped, he would have enough room but blocks made it more comfortable to do the work.

I think my truck needs this replaced. I never have this problem while driving it will do it when I go to start it and won't start. Usually cycle the key several times and it will start. And is random. Not every time

Cant wait to watch Martin fix Tiny in a 20min video...LOL, that would require alot of editing. This trans sel sw is just like replacing the Multi-Func Switch on your F-Series. Ive replaced MANY of those.....

@TruckingTogether

9 ай бұрын

it’s going to be a couple weeks of videos more likely lol

@jonmorgan9858

9 ай бұрын

The overhanl should be cover by warranty if it was done at authorized cummins dealer, it used to be when i work there and any cummins recon parts that were used should have porgrssive warrant on them, you know like recon liner kits rods etc.@@TruckingTogether

Perhaps Alice is moulting send her too Brazil 😆 🤣 😂

You might want to change the fresh air filter while you have it apart I'll bet you there's a ton of dog hair on it.😮

What did you put around the column that looks like it would keep dust out 😆

I wouldn’t know how to drive that .🙁 13 or 18 speed for me .👍

I’ll keep my manual. Any regrets yet? Love the channel keeper truckin! FJB

@TruckingTogether

9 ай бұрын

None at all. This was preventive maintenance

You could nearly make another dog with all that hair 😁

What's the reason for the cloth cover over the steering column ?

Good morning y'all time to GIT R DONE

Hey saw the engine on the pallet in Mincel video 🤔

@TruckingTogether

9 ай бұрын

we run a week behind currently on air dates, quality takes time to edit

@ronthompson3525

9 ай бұрын

Glad your getting Tiny back on the road

did it fix the problem

If I heard dog hair once lol

It the boogie man

I have 2020 kw t680 same shift stalk . I got the 521 code break pedal postion signal and transmission requsted gear and transmission fault on dash. Sometimes its appear and not going to reverse. It could be stalk?

Dog hair shield HA

Thats not dog hair. Its some old man’s that’s been driving that truck for years old leg hair !!! Lol.

🤚🏽😎🙋🏽‍♂️

Probably all the dog hair shorted out the switch

Hello 👋 Hey Hi and Howdy 👋.. Drivewyze Rocks

Crazy that part is almost $1000

@TruckingTogether

9 ай бұрын

The XY shifter in the old eaton autos are over $4500 😳

@mattmotter9359

9 ай бұрын

@@TruckingTogether damn

@jamesdiamond820

9 ай бұрын

@@TruckingTogetherthat’s disgraceful

Can you get me the name of the guy who rebuilt them in Dallas please?

@TruckingTogether

3 ай бұрын

I never got that info. Last I heard Weller can rebuild them through a 3rd party.

Douse anybody know if this has to be programmed or can I just swap it??

@TruckingTogether

8 ай бұрын

Disconnect your batteries and just swap. No need for programming.

What is contact info for rebuild shop ?

@TruckingTogether

9 ай бұрын

For the shifter? I haven’t found it yet. Edit: Just talked to weller truck parts. They do it for $623

How much was the it $$$ ?

@TruckingTogether

9 ай бұрын

$900 something with tax

How do you knowthat it was from your dog and not the other persons dog

@TruckingTogether

9 ай бұрын

it’s from a former owners dog

So what code was it giving you

@TruckingTogether

6 ай бұрын

Transmission requested gear and popped up a stop driving message. Forgot the actual code. Kept running it like this just fine

@bresjks

6 ай бұрын

@@TruckingTogether I get that also on my eld it reads fault codes but nothing on dash as far as engine light yours same?

@TruckingTogether

6 ай бұрын

Never threw an engine light. Just popped up a ghost code. It would say transmission fault seek service immediately too but a cycle of the key would make that go away.

@gilbertsepeda257

21 күн бұрын

Thank you so much. Many blessings

Roger on the disgusting crap!!

I think we need name the no name truck Boomer ! Boomer didn’t have a problem booming out to take the teem !!!

Ain't your daughter and son in law driving that truck

@TruckingTogether

9 ай бұрын

currently yes

Having dogs in any living space is disgusting.

"Have A Coke And A Smile!"