Replacing My Drive shaft (VWT4)
Автокөліктер мен көлік құралдары
I managed to replace my drivers side driveshaft and theres are the tools I used
13mm socket
17mm socket
21mm socket
24mm socket
27mm socket
21mm spanner
Breaker bar
10 allan key
M12 muti spine
Ratchet
Ratchet extensions
Hammer
My Instagram
pranceproject?i...
Пікірлер: 37
Thanks for making this. Very clear explanation and images. The most comprehensive video I've seen on replacing the VW T4 drive shaft.
@PranceProject
Жыл бұрын
Your more than welcome I'm pleased It was helpful
Well done. Like your videos, and the old T4.
Mate watched this video last Saturday and it really helped me sort my inner boot out.
@PranceProject
2 жыл бұрын
Glad it was helpful
Really well done, it's going to be very helpful to repair my year 2000 2.5 tdi T4. Cheers mate, you did an amazing job !!
@PranceProject
3 жыл бұрын
I'm pleased it was helpful i hope u manage to get the job done. I pleased I could help 🤙
@medwaykid
3 жыл бұрын
Great help, thank you. Found the 'tools used' bit at the beginning a great help. Surprisingly hard to find online a list of tools needed to do a job.
Excellent video! 👍
Great! wish you the best
enjoyed the video...big thumbs up
That was bang on. Thanks 👏
Great video. Im about too change my inner cv boot on My T4. Your video is spot on. I think this will help me alot. Love too watch your videos. Thanx for recording this 👍
@PranceProject
2 жыл бұрын
Your welcome mate pleased it's helped 👍
See the one I'm fighting has the pump on the back of the block Seriously been giving me a mental breakdown 😂😂
nice work homie! thx for the video, going to do my P/S DS this week!
@PranceProject
4 жыл бұрын
Hope it's been helpful. Good luck and enjoy
Nice one Thanks, i have done it a couple of times but this is way quicker.
Great video for all diyers, very helpful 👍
@PranceProject
2 жыл бұрын
Glad I could be helpful 👍
Nice ball joint tip. And good vid
@PranceProject
3 жыл бұрын
Thank you
Cheers thanks for this!!👍😀🤘😎
@PranceProject
16 күн бұрын
No problem
Great video buddy 👍👍👍
@PranceProject
2 жыл бұрын
Thank mate means alot 🤙
Good job. Not sure what wood you're looking at getting but have you checked out Evo Motion Design in Wareham!
Great work as always. I've sourced oem replacement CV axles and in looking up the torque spec on the big outter bolt and the 6 smaller inner bolts I saw a note to always use new bolts. have you had any issues reusing the same bolts here? cheers!
Should have undone the 27mm bolt first with the van on the floor. Much easier and safer.
@PranceProject
2 жыл бұрын
Yer I realised that after but was to late so I had to roll with the punches lol
Attaching the bottom ball joint is a bloody nightmare!
@PranceProject
3 жыл бұрын
I've heard it's a pain
How long would you say this took you need to get mine done, great job well done by the way
@PranceProject
4 жыл бұрын
About 3 hours but I was filming and taking my time but I would say hours and a half all in
@RicksAquariumsuk
4 жыл бұрын
@@PranceProject I've been looking on ebay there £58 new not to bad, are they the same both sides as they don't say left or right
@PranceProject
4 жыл бұрын
There side specific mate