Thanks for your time. I was at a mechanic and he was trying to make it sound so difficult. I see that IT IS difficult but he made it sound like he had to rebuild the engine. I’m going to show him your video and then see if he will reduce his price since it’s not as difficult as he made it. Thanks again. My Respect to You. Funk

@earthscraper69

4 жыл бұрын

Your welcome hope he gives you a better price.

You go BOY!! I know that feeling of success...You did it and didn't take it to a rip off mechanic or machine shop, oh what a feeling! love your vids..

@earthscraper69

7 жыл бұрын

+Rottsrule thank you

i would recomend placing towels in the holes in the head in the oil return holes. because the lifter can fall out when you remove the rocker rails and they will go right in the oil pan.i have one in mine right now. going to retrieve it when i change crank berings.

good job dude, I luv it n sounds good too, congrats.

@earthscraper69

8 жыл бұрын

+Gabriel Alvarez thank you

good job dude ! your making good progress. .

@earthscraper69

8 жыл бұрын

+Jason Rose thank you

good job on getting the bolt out my trick would have never worked for that it was too far down in there

@earthscraper69

8 жыл бұрын

+skulledmonte84 ah on and that you

How long did the process take you from here to putting it all back together?

Hey I have a 86 b2000 se-5 how do I know if I have hydraulic lifters or mechanical lifters?

you are going to have a party but we are not there we are here on youtube watching you enjoy those delicious ribs ummmm good lol great videos and yes i am a subscriber and i own a Mazda b2200 1989 so please keep umm coming I'm learning a lot from you and I miss Mazda joe may he rest in piece

@earthscraper69

4 жыл бұрын

Thank you for Subscribing and yes may rest in peace

How tight dose The valve cover bolts need to be ?

@earthscraper69

6 жыл бұрын

+Javi Court not very tight there's no pressure in it so finger right then one to one and a half turns more.

sound great man would like to meet you some day

@earthscraper69

8 жыл бұрын

+jorge torres thank you and that would be cool we may see each other at a show sometime.

@jorgetorres-ku4kh

8 жыл бұрын

+Lawrence Duarte we would

Hey Lawrence Duarte, Is this the same method for the mazda b2600?

@earthscraper69

7 жыл бұрын

+Philip Myer I'm not completely sure

@PDillz

7 жыл бұрын

I learned the hard way. It's not the same way at all. Valves are non adjustable.

Did you use a fuel pressure regulator for the Weber. I've heard you need one. Then I've heard you don't. Keep up the good work.

@earthscraper69

8 жыл бұрын

+Booksince72 no I did not if you order the webber for your application then it comes pre regulated and reddy to install.

@Booksince72

8 жыл бұрын

Ok,thanks. It's going on a truck identical to yours. '89 Mazda B2200. I've had it since 1994.Never getting rid of it!!!

i also have a b2200 that im working on, and the last time it was running it was burning a lot of oil smoke screening the drive way, what would your opinion on what is going on, i beleive it might be a bad head gasket but im not 100% sure

@earthscraper69

8 жыл бұрын

+Ricer Mazda B2200 that's possible but also could be needing rings that is probably my problem as well

@isaacbarton5476

8 жыл бұрын

I'd try valve stem seals man if your blowing blue smoke...

@thehatchetgarage593

8 жыл бұрын

+Isaac Barton its white smoke

@thehatchetgarage593

8 жыл бұрын

+Lawrence Duarte ok ill check the pistons out once i get the head off gota get the header and the intake off first ill keep ya up dated

@edvinnelius8213

6 жыл бұрын

white smoke is blown head gasket

Does this get rid of the ticking noise?

@earthscraper69

7 жыл бұрын

+Jeff Quinones it did on mine

Did you soak your lifters first before installing?

@earthscraper69

6 жыл бұрын

No

i wish you could have shown me when you put your valve cover on either i did not tighten to tight or something oil leaks everywhere through the valve cover corner gasket

@earthscraper69

4 жыл бұрын

Oh I'm sorry but they are not to be tightened very tight start from the middle and work out to the ends but just lightly like your holding it down with your hand.

@denk25143

4 жыл бұрын

ok thanks for the fast reply lol excellent customer service also i found that i should use silicone in the corners where it goes up and over the camshaft .

@earthscraper69

4 жыл бұрын

Yes that's also a good idea glad I could help

Should this be similar for a 91 b2600i se-5

@earthscraper69

6 жыл бұрын

Im not sure

@EntertainmentHub92

6 жыл бұрын

Lawrence Duarte thanks for the quick reply bud!!

@SkorpyoTFC

5 жыл бұрын

2600 models have the 2.6l. They have 12 valves instead of 8, but the hydraulic lash adjusters are the same part.

Good job on removing the bolt. Usually the EZ out breaks and then you're in a world of shit. Did you replace the bolt?

@twizted1toyz

8 жыл бұрын

Lots of finger crossing and/ or cussing! Great job getting it out! Good progress!!

@earthscraper69

8 жыл бұрын

+Cooll Asice yeah I have a box of b2200 bolts from the 2 I've and over the years :)

@earthscraper69

8 жыл бұрын

+Twizted1 lol yes indeed and thank you.

Hahaha that's the feeling i get when i remove the broken head bolts from the land rover or from the BMW lol

I’m stuck here working on mines !!does the bolt to the tension pulley loosen to right or left can’t even get it to move don’t want to strip it out!😤😤😂😂any help?

@earthscraper69

3 жыл бұрын

It should go to the left i wish you luck.