Thank you for making this look less scary to do for someone at home. As you said, "I'm not a mechanic, and I'm not rich." :)

Thank you SO much for posting this. Very helpful and very well done, with valuable pointers. Only thing I'd add (because I know my dad would tell me to do this) is to clean the debris from around the old fuel pump before ever removing it, then once it's removed, clean the rest that you couldn't get to originally. It'll help minimize the risk of something dropping into the fuel tank while you're unscrewing the ring and removing the old pump. Thanks again!! Really :) Very well done.

Changed my 2003 Altima fuel pump with your video help. thanks for the info. A friend suggest to me to leave the engine running then remove the fuse that goes to the fuel pump and let it run till it is out of gas pressure. It worked had some fuel left in the line but no pressure and i then disconnected the negative from the battery. thanks again.

@DIYApprentice

8 жыл бұрын

The service manual says almost the same thing with regard to relieving pressure in the fuel line. (1) Remove the fuel filler cap. (2) Remove the fuel pump fuse. (3) Start the engine and let it stall. (4) Crank the engine a couple times after it stalls.

Thank you for the excellent video. I have my part and am ready to change the fuel pump thanks to your detailed easy to follow instructions.

Thanks a lot for sharing, I found my fuel pump having a crack I bought it and followed your instruction and it did work smoothly!!!!! Thanks

Really helpful video! My 05 Altima's pump just went out so I have to replace it now. I'm grateful you didn't edit out your mistakes as it's helpful to see. Thanks again.

thanks bruh, took your advice step by step and it worked. Thanks for this tutorial, I am not mechanically inclined, and now I am able to get back and forth to work.

Thanks for taking the time to make the video. Mine has the same exact problem. Thanks much

So glad I came across your video. Thanks so much for sharing! Did not realize the pump was that accessible.

so glad I came across your video! Very detailed. The other videos did it too fast.

Thanks for video I can't wait to do this its 3 in the morning right now and your video was exactly what I was searching for . Georgia boy

Fuel pressure relief procedure without diagnostic equipment: remove fuel pump fuse or harness conmector of the pump and start the engine till it stalls. Then crank it 2-3 times and make sure it does not start. Thats the fuel pressure relief procedure.

your the boss! I'm buy a Nissan 2002 and the owner said that the fuel pump it's not working so you just saved me $$$$ thank you!

@JDBaxone

7 жыл бұрын

Ricardo Hernandez Awesome!!

@vegeta9411

7 жыл бұрын

Ricardo Hernandez that was an easy one. you gonna make a killing.

@vegeta9411

7 жыл бұрын

nice!!!

Beautiful video 🙂🙂🙂I have a Nissan Altima 2003 with same problem and for 3 months smells gas inside and 3 mechanics not finding the problem and with your video I did the same thing and all resolved. Thanks 👍👍👍

Thanks a lot Man, you saved me 400 Bucks, and now i love my Altima even more.

great video!!!!! good job with keeping the camera steady love it!!!!

Thank you for your clear concise and well shot video. Your attention to detail made my project easy and fast. Note to others: While JD replaced the Whole Unit from Auto Zone, priced between $142 and $201 qt today's price, there are alternatives. I purchased the pump component alone, along with a new strainer and a few misc. parts that were not needed, for $20 on Ebay. I added $7 for fast shipping. The Universal Pump is identical to the OEM and was easy to swap. Just to add to your comfort, the part was 100% Guaranteed by the seller. The 2 or 3 day wait was worth the money to me. BTW: Nissan wanted $800 to install an Original Part and $600 for an Aftermarket pump. I was not smart enough the shoot a couple of photos to assist in the proper reassembly, but this video got me straight. Well Done

@JDBaxone

8 жыл бұрын

Thanks for the for the additional information. I hope others can benefit for my video and your additional info.

Thank you so much this really helps I am going to be changing the gas tank and the fuel pump and this gave me a huge advantage on what I need to look for thank you this video was the best one I found thank you again

JD: Awesome video. Kudos to your son on the excellent video duties!!! Looking forward to the new one arriving in two days so I can get my sister-in-law's car back running. Glad this is so easy to do.

@JDBaxone

8 жыл бұрын

Thx! Lemme know how it goes.

thought my fuel line was leaking, checked it, and I got the same issue. crack on the top of the fuel pump. good simple video!

Thanks for all of the help! Saved me $600!!!

Amazing and straight to the point video. Thanks for the help!

Thanks for the video! I'm about to do this today and this video will be my guide.

my son has the same car and his fuel pump is bad and I tell you what....we bout to change this bad boy our self. Mechanic told us it would be about $700. NOT!!!

Thanks you, very useful greatings from Monterrey, México!

Good stuff, thanks for sharing & good camera work too!

Thank you sir for taking your time to showing this video very helpful

Excellent vid. Not sure if anyone mentioned this or not but around 4:46 just take the fuel cap off before taking the intake/outake lines off :) good job

Thanks man!!!...your helping alot of people out.

Thank you so much. I have the exact same issue with my pump housing, leaking from the top as well, cracked.

I have to do this now ,this is really helpful thanks man

great job thank you for your help ,had the same problem , car was smelling like fuel , after close inspection could see a small crack on top of the fuel tank.

Great video I’m thinking my car needs a new fuel pump . You made this look so simple that I don’t want to spend money on a mechanic

Awesome video! you saved me a ton of time and aggravation. Thank you.

thank you for the help I greatly appreciate it...I hope when my son gets older he helps me out as well

thank you for saving me some money. u made it simple to see everything

Helpful video I have to change one myself and mechanics made it seem harder then what you just showed on the video.

good job brother.. not bad for your first one..only thing I would add is you don't need all the special tools ..you pull the fuse for the pump and let the engine use up the fuel in the lines.. always gunna have some bit of a mess no matter what..#2 .always.. always buy new seals ..you never want to reuse old seals..even if they look OK..a bad seal just might be the cause of the problems to begin with....changing the fuel filter at the same time is the best way to go..then always replace the filter at every tuneup ..your pump will thank you but you did just fine ..family hero

@shortg334

5 жыл бұрын

The filter is made within the pump. Its all one unit

Thanks for the video just what i was looking for i will have to do it myself im broke cant offer a mechanic plus its a safe of $$$$

Awesome video thank you so much for sharing

Good simple video. Man. Thanks

The best diy i seen in years

thanks bro this helped alot

Thanks! I was getting some exhaust work done and meinike gave me an quote of $530.00 to replace it. Bought part from amazon Delphi FG0501 Fuel Pump Module - $127.00

Fuel pressure relief, just open you're gas cap

@Rob-kz1lj

6 жыл бұрын

Get this man a beer dammit

@timwiltse365

4 жыл бұрын

You clearly have no idea how the fuel system works.

Great job brother and thank you for the tutorial. I'm bout to go try mine.........Pray for me.

Thanks for the steps I just did mines this morning

@alexwu3350

7 жыл бұрын

was the lock ring easy to unscrew cause mine is really tight.

Thank you brother, good video.

thanks for the video.

Jeeeez man!...just about the roughest way I've seen anyone put on a new rubber seal before! I thought for sure it snapped!

Great video

thank you for your help God bless you

Thank you brother! I have to do the same thing. Nissan quoted me $1500! That’s a no go!

Nice job, thanks!!!

Great,great,great, thanks for sharing

great job buddy

Nice! Very helpfull.

great dad

Thank you so much.....!!!!!

Thanks again!!!

U did good sir!!! Thx

Gonna be changing mine tomorrow. Wish me luck

Thank you sir

#1 tip always empty the tank and also disconnect battery and having fire extinguisher will be smart too.

Thank you soooo much🙏🏼

Thank you.

Nice job. Except it didn't look the gasket got seated all the way. It was only half way in when you screwed on the lock ring. It might have gone all the way down when you screwed it on but you might want to double check. That could have also been the reason why it was difficult to get the metal cover back on. Also, it would have been a good idea to start the pump (ignition on - not start) with the metal cover still off so you could make sure there were no leaks.

@JDBaxone

8 жыл бұрын

Thanks Todd for pointers. After your reply I went back in to check the ring , it was snug. Only issue I had was the smell of fuel still in the fabrics.

don't forget to get a new sealant too!! that's very important!! unfortunately he didn't do that. :/

Thank you

thanks alot bro

My dad said thank you you saved him alot of money 👍🏼

What I did to relieve the pressure of the fuel system: Follow all the steps until the top of the fuel pump is exposed. Unplug the wire connector, then crank the engine. Same concept as removing the fuse just saves you a step!

You. Video. Good. Amigo. Thanks.

Thanks.

Thank you. Just saved me 400$

Hero

First off thanks for the video. Seems like you're saving everyone money! Planning on doing this with an '05 model Altima. Any suggestions before I get started?

@JDBaxone

7 жыл бұрын

Timothy Peterson just be careful. once you get in there you'll see how simple it is.

I HAD THE EXACT THING HAPPEN TO MINE 03.......like its identical to what happen here

Good morning sir, tx for your video, i have a problem, when i replace this pump the fuelmeter is not work, no any more, what do you think, any solution??? Tx for read me

Hello,is it QR25DE motor engine?

nice job i think i could do it myself just from watching your video my part is almost 300$ not including labor

good ish

Great video!!! I know you're not a mechanic but I have a question for your before I try replacing the fuel pump. My engine cranks but won't turn over. I thought it was the battery but roadside assistance said it sounds like the fuel pump is not pumping fuel to start the car. Do you think I should go ahead and just replace the fuel pump? Thanks!

@JDBaxone

7 жыл бұрын

double check battery, alternator, and starter. Get a second or third option also. Someone physically to look and listen to it.

how much you got the fuel pump.

I'm having trouble disconnecting the fuel pump line/hose.. any suggestions?

@JDBaxone

7 жыл бұрын

Elundra Richardson r u talking about the one on top? @4:10 on video?

Hello I was just curious if this solved your issue? I also have the smell of fuel/fumes in the car. I have a few holes in my exhaust underneath but am thinking it could be my fuel pump. Thanks! Great video!

@JDBaxone

3 жыл бұрын

Yep! It solved it. Felt like I had on a new pair of shoes! There’s a difference in the way EXHAUST smells and the way pure Fuel/Gas smells of that helps.

Awesome I think I'm gonna have to try this since I'm broke and the car is smelling like gas inside the car a lot

@josephdelaney6419

7 жыл бұрын

Jackie Olivares my car Everytime I start it smells like gas

The gasket ring must always be replaced and you need to use the fuel pump lock ring wrench (part number J38879 so no don't just hand tighten it. Once tightened, start vehicle and check for leaks before closing panels back on. I promise you this guy had reoccurring issues on such a simple task.

@Airmanmx1

4 жыл бұрын

Update for you all, autozone has a fuel pump tool kit for rent. Its $100 but once you return it within 3 days you get your money back so its free.

@Texaca

9 ай бұрын

... are you talking about the large rubber gasket, that he took off the old fuel pump? Why would you need to replace it, it only has one function, and when you tighten the large plastic ring, it compresses the seal to seal the fuel pump assembly 🤔 Where did you read about this? Thanks ✌🏼

That issue is pretty common on those vehicles

i love you

do you know if the fuel pump will automatically know how much fuel is in the tank after you replace it???

@JDBaxone

6 жыл бұрын

Leo Cardenas Yes. Thats what the FLOAT ARM is for. All the way up =Full ..............down = Empty

JDBoxone I have A 2014 nissan Altima is it the same to change it out?

@JDBaxone

6 жыл бұрын

Fidel Barreras Sorry dude didnt see ur question til now. U'll have to look it up. Im not sure.

My 2005 2.5s has the same issue.... a "mechanic told me with the part, diagnostics, and labor. They were going to bill me about $1000!!!!!!!!!!

I replace my fuel pump but stalls at half tank did the new one come bad

@JDBaxone

6 жыл бұрын

Is the float stuck....are you actually getting a full tank. Instrument panel not working

Hi I have the same car just bought it not too long ago the service engine light was on the guy said it was the O2 censor but it's not. I got two codes which are P0455 and P1448 I went to a mechanic who did to a smoke test to find out where the evap leak was coming from I took care of that problem but then another problem has popped up P0462 which is i guess related to the fuel pump. I changed the gas cap. The mechanic says he think it could be the fuel pump when he hooked his CPU thingy to my car when the fuel pump is connected it says 5.8 volts but when it's disconnected it's 0 volts idk what he was saying but I would like to know before you replaced the fuel pump did the service engine light come on? I know you said you were not a mechanic but I do hope what I am saying makes sense lol I just don't want to replace the fuel pump and that's not really the problem so can someone help me or give me some type of advice regarding this issue because i need to renew my plates. Please and thank you :)

@JDBaxone

7 жыл бұрын

Danielle Nelson Hey, that code is for a sensor connected to urfuel pump. My light was on...but I had transmission codes. But u should just weigh your options. It is a used car right? I would go ahead and change the whole pump now to avoid issues later. If thats your only code. Also find someone else, get a second opinion...

@daninelson1427

7 жыл бұрын

I figured it was the sensor I was told it was the sensor but was also told that I couldn't buy the sensor alone that I would have to buy the whole assembly which is the pump. After seeing your video I told my husband that he can change the fuel pump instead of me paying someone else to do it. That's the only code I am getting and when I plug my scanner up that code P0462 would pop up and it would say fuel level sensor a circuit low. Autozone said it could just be wiring maybe something came loose or off when the guy changed the purge valve but that code popped up before he changed the valve and yes it's a used car. I bought the car from someone who I think got it from a auction or something. Idk

Did you have trouble starting it did it take a while to start

@JDBaxone

5 жыл бұрын

no. I had to keep windows down all the time because it was dry-rotted and cracked. may not have same issue as mine, it's made of Plastic. it may be time to swap that out. after checking your fuse and relay.

I Need To Change My Fuel Pump But I Have A Full Tank Of Gas .. Can I Still Change It Like That ? Or Do I Have To Get The Gas Drained Out ? 😯

@JDBaxone

7 жыл бұрын

Emma Williams Nope! Just remove the pump...slowly... then replace.

@emmawilliams841

7 жыл бұрын

JDBaxone Thanks 🙌

@JDBaxone

7 жыл бұрын

Emma Williams let me know the results!

And would there be a code

how did you unlock the fuel pump locker ring. i had big problem with that.

@JDBaxone

7 жыл бұрын

it should just unscrew... like a lid from a jar.

@alexwu3350

7 жыл бұрын

thanks. but mine is really tight, i couldn't unscrew it. any good suggestion?

@carvarepublicans6468

7 жыл бұрын

You can put a screwdriver up against one of the ridges on the ring and gently tap it in the direction you want to turn. Use a hammer to gently tap the screwdriver. Once it's loose, use your hand to unscrew... like a lid from a jar.

Thanks because the price of the pump cost 160 at auto zone mechanic trnna charge me 200 to put it in