"Good luck with your Peugeot" Thats what we need, really. Thanks for the video, gonna do it soon for my beloved 407.

Thank you very much! You just made my day! I´m sure that many will appreciate your Video.

Спасибо за подробное видео!!!!! 👍👍👍

guma ma ujemna rozszezalnosc cieplna ... genialny film :D

@pawelczar

3 жыл бұрын

"guma ma ujemna rozszezalnosc cieplna" - i co to oznacza w praktyce? Bede musial wymienic uszczelke w swoim, takze moge uzyc sposobu pokazanego tu na filmie czy nie? Bo nie wiem jak interpretowac twoj komentarz?😅

Hi , I have a 307 cc 2004 my problem is after let the car worm the engine start to shake so what’s the problem, thanks for your consideration

thanks for the vid, quick question, should there be oil in the valve cover?, all that oil i see must it be clean before i seal the cover back?

Great video greetings from chile !

@isitfixedyet891

7 жыл бұрын

Thanks Bastian! I appreciate it! Good feedback always motivates to do more :) Cheers!

I got fhat plastic gasked plus beside that i got some red paste and still got bit oil leak.. Will new gasket fix that? Im planing to disamble, clean ans put new one without paste, or i need paste too?

Do you have a video for electric power steering pump removal

Will You plan upload engine mounts replacing videos regarding peugeot 307?

So my 307 was emitting a blueish-white smoke and doesn't overheat, but seems to misfire a little. The gasket is clearly leaking because you can see oil around it. I'm about to fix it and I hope everything works when I'm done.

So you just used your old seal with silicon, right? Do i need to silicon everything if my seal is new?

Hello, Please, where is locate PCV valve?

Hi, I have oil in coolant in my peugeot 307, 2008, bioflex . What could be the problem

Hi! Very good information. I have some problems about engine air intake in Peugeot 307. Could you help / consultate me about this system?

Czyli nie bawić się w uszczelki .. tylko sylikon dać ?

I think PSA changed the design somewhere around 2004/2005. So you have the same engine but 2 different covers and gaskets depending on the production year/month. Same with the oil filter design and (I think) parts of the air intake. Don't ask me how I know. 😉

Thank you!!

Thank you so much! I just finished mine and it went really well thanks to your explanation.

@janellethistleton2725

Жыл бұрын

Oh and I don't have a tension/torsion wrench but neither did the original mechanics so i did it up till it couldn't be tightened anymore and that will have to do..... we'll see

Good day, come easy, while checking the spark plugs today, the spark plugs were oily as if I took them out of the oil, what could be the reason, what could be the bidet misfire in the vehicle pejo 307 1.6 16v 2004 Model Thank you very much for your interest and interest

Can you do a video on the a/c unit inside the passenger side

Hi I have a 2005 peugeot 407 sw 1.8 litre petrol. it has 146000 miles on it but every two months I have to top up the oil. I did notice that their is some oil around the rocker cover on the back. my question is. Should I follow the same process in stopping the leak? thanks

@isitfixedyet891

5 жыл бұрын

Hi Anthony, I woud recommend you to buy the correct gasket and replace it. If you are very low on money you can try this repair. It has been working fine with my car and I have been driving over 15.000 km afterwards. I see no problem up until the day today - keep in mind that it will always be better with propper gasket :) Cheers

Great video!! So you just add hi temp silicone and not change the old rubber seal?

@isitfixedyet891

6 жыл бұрын

Hi Khairun, Yes, I did exactly that :) I am glad you like it. Cheers

Dear sir how to timing set

I didn't see you put the plastic gasket back in.

Just Buy the proper gasket

Thanks

How to peugeot valve seal oil leak

did you get any error code for this leak..?

@isitfixedyet891

6 жыл бұрын

Hi Wolfcaster, No, car's PC do not see such details. It would be visible if my oil level decreased significantly. Not before. Cheers!

can i know what that hose from valve cover for ? is that valve cavuum ?

@isitfixedyet891

5 жыл бұрын

Hi Muhammad, What hose do you mean? Let me know the minute in the video. Cheers

@KECIKKCHANNEL

5 жыл бұрын

Is It Fixed Yet ? at minute 1.53 what that 2 hose for ?

@stephenmcqueen4029

5 жыл бұрын

It’s a breather hose

q Qwick fix: can you make a vedio on water leak. water pipes broke

the proper gaskets are like £12 each......cover off...pull out plastic part...replace....half hour job for both gaskets....simple

@pawelczar

3 жыл бұрын

Can you share some links where I can buy these in this price? Thanks

@aubreychiloane7568

2 жыл бұрын

@@pawelczar di you also put back the cover gasket also

This is the pre VTi engine?

@carlosgilpinheiro7510

Жыл бұрын

This is the TU5JP4 before the 1.6 EP6 VTi.

Would you say the ew10j4 a reliable engine?

@isitfixedyet891

6 жыл бұрын

Hi Zhai, I have not worked with ew10j4 engine yet. Not much I can say about it. The one on the video is 1.6 16v model NFU (TU5JP4). Cheers

@carlosgilpinheiro7510

Жыл бұрын

All EW family 1.8/2.0/2.2 are good engines without chronical problems that kill the engine, the same for this TU5. Head gaskets or even head covers are normal to be changed after some years of use in all cars.

Wrong gasket dude...this is for 206 caps!

@isitfixedyet891

6 жыл бұрын

Hi Saxo, 206 1.6 and 307 SW 1.6 have the same engine - NFU (TU5JP4). Are you saying the caps are different even though the engine is the same? Cheers

@debelguzi

6 жыл бұрын

I haw broken my cover coz a wrong gasket, I received gasket weth pleh but i nedet onli rober, cover is shallower. Same engine TU5JP4 NFU 1,6 307SW two different cover caps same engine.

@iyaramonk

4 жыл бұрын

@@debelguzi How do you know if you need the tall one without opening engine?

This video should be instruction what NOT to do for replacing valve cover, omg...

What a joke of a design

I didn't see you put the plastic gasket back in.