today i changed my buddy ball joints with the 555 sankei ball joints link to ball joints: www.ebay.com/itm/324552531234...
Жүктеу.....
Пікірлер: 35
@locdogwitd9 Жыл бұрын
About to start mines soon. Just rewatching this to feel comfortable😂
@DavidGarcia-fh9ij3 ай бұрын
Just bought new aftermarket lower control Arms what do I do about the sleeve? Can I just install new 555 ball joints?
@shaunzulu45912 жыл бұрын
Its always easier to press the ball joints in when they have been in the freezer overnight. Also did u have to rent a honda adapter on top of the ball joint press kit? Gonna be doing this job before the month ends. Thanks for the video
@Mythik559
2 жыл бұрын
I can’t remember if it came with my Mac kit or autozone had the the adapter and I just never returned it cus it was cheap so idk
@shaunzulu4591
2 жыл бұрын
@@Mythik559 Oh ok thanks
@locdogwitd9
Жыл бұрын
Does that damage the plastic protecting the grease?
@shaunzulu4591
Жыл бұрын
@Dk ec no it doesn't damage the rubber boot
@LeoniloArellano Жыл бұрын
Any knows what’s the best upper ball joint for the TL?
@Mythik559
Жыл бұрын
You just replace the whole arm oem or skunk 2
@sippinsyrup Жыл бұрын
I’m putting my coilovers on soon so is the lower ball joints all I should get before putting the coilovers on?
@dannypadilla3008
7 ай бұрын
Did you only do the lower ball joints or upper as well ?
@sippinsyrup
7 ай бұрын
@@dannypadilla3008 I only did lower. Still riding fine but make sure to get Sankei 555
@alexdavila69092 жыл бұрын
What’s the part # on the 555 sankei
@ChrisHally45
Жыл бұрын
SB-6314
@locdogwitd9 Жыл бұрын
Any problems yet? Got mines done a while ago and haven't drove it bc my house is getting remodel and there's just garbage everywhere so I can't really move it out
@Mythik559
Жыл бұрын
On my personal car no issues
@locdogwitd9
Жыл бұрын
@@Mythik559 how many miles so far?
@Mythik559
Жыл бұрын
@@locdogwitd9 700
@TheDerrty1112 жыл бұрын
Why did you have to use the old ball joint sleeve?
@Mythik559
2 жыл бұрын
When the sleeve comes out of the lower control arm you have to put it back it not repose come out so I have to knock it off the ball joint and put it back into the control arm
@troyfall6573
Жыл бұрын
That sleeve is part of the lower control arm. It is impossible to find a replacement. I called multiple dealers and they do not even have a part number to order one. They recommended we contact a junkyard and go pull one. I am trying to order the entire lower control arm just to get that part but not all control arms come with the sleeve.
@hondatriple6 Жыл бұрын
Is that sleeve on 06 honda accord v6mt6 sedans?
@Mythik559
Жыл бұрын
Not sure on tnat
@christiantorres78542 ай бұрын
what was the size of lower ball joint?
@Mythik559
2 ай бұрын
Not sure they just 555 brand
@Quartz_7 Жыл бұрын
How the 555 quality compare with original? How long can it last?
@Mythik559
Жыл бұрын
It’s as good or better than oem more beefy oem is good and nothing wrong with it but it’s like double or tripple the price
@Quartz_7
Жыл бұрын
@@Mythik559 thanks you..want to use at ny toyota..but sometimes im little bit sceptical when i got feedback from our mechanic..they said not good as original or life span around 2 years..fyi im in malaysia..
@locdogwitd9
Жыл бұрын
@@Quartz_7 I believe oem cost more
@theprogwalrus7564
Жыл бұрын
Don’t use it bro. thing failed on me, not even 5k miles.. broke my axle and my fenders
@Quartz_7
Жыл бұрын
@@theprogwalrus7564 woww...too bad..tq for info
@marcbarbosa29402 жыл бұрын
Use a pitman puller to take out the sleeve bro.
@catfissh
Жыл бұрын
Ball joint separator worked for me too. Shit was hella easy
Пікірлер: 35
About to start mines soon. Just rewatching this to feel comfortable😂
Just bought new aftermarket lower control Arms what do I do about the sleeve? Can I just install new 555 ball joints?
Its always easier to press the ball joints in when they have been in the freezer overnight. Also did u have to rent a honda adapter on top of the ball joint press kit? Gonna be doing this job before the month ends. Thanks for the video
@Mythik559
2 жыл бұрын
I can’t remember if it came with my Mac kit or autozone had the the adapter and I just never returned it cus it was cheap so idk
@shaunzulu4591
2 жыл бұрын
@@Mythik559 Oh ok thanks
@locdogwitd9
Жыл бұрын
Does that damage the plastic protecting the grease?
@shaunzulu4591
Жыл бұрын
@Dk ec no it doesn't damage the rubber boot
Any knows what’s the best upper ball joint for the TL?
@Mythik559
Жыл бұрын
You just replace the whole arm oem or skunk 2
I’m putting my coilovers on soon so is the lower ball joints all I should get before putting the coilovers on?
@dannypadilla3008
7 ай бұрын
Did you only do the lower ball joints or upper as well ?
@sippinsyrup
7 ай бұрын
@@dannypadilla3008 I only did lower. Still riding fine but make sure to get Sankei 555
What’s the part # on the 555 sankei
@ChrisHally45
Жыл бұрын
SB-6314
Any problems yet? Got mines done a while ago and haven't drove it bc my house is getting remodel and there's just garbage everywhere so I can't really move it out
@Mythik559
Жыл бұрын
On my personal car no issues
@locdogwitd9
Жыл бұрын
@@Mythik559 how many miles so far?
@Mythik559
Жыл бұрын
@@locdogwitd9 700
Why did you have to use the old ball joint sleeve?
@Mythik559
2 жыл бұрын
When the sleeve comes out of the lower control arm you have to put it back it not repose come out so I have to knock it off the ball joint and put it back into the control arm
@troyfall6573
Жыл бұрын
That sleeve is part of the lower control arm. It is impossible to find a replacement. I called multiple dealers and they do not even have a part number to order one. They recommended we contact a junkyard and go pull one. I am trying to order the entire lower control arm just to get that part but not all control arms come with the sleeve.
Is that sleeve on 06 honda accord v6mt6 sedans?
@Mythik559
Жыл бұрын
Not sure on tnat
what was the size of lower ball joint?
@Mythik559
2 ай бұрын
Not sure they just 555 brand
How the 555 quality compare with original? How long can it last?
@Mythik559
Жыл бұрын
It’s as good or better than oem more beefy oem is good and nothing wrong with it but it’s like double or tripple the price
@Quartz_7
Жыл бұрын
@@Mythik559 thanks you..want to use at ny toyota..but sometimes im little bit sceptical when i got feedback from our mechanic..they said not good as original or life span around 2 years..fyi im in malaysia..
@locdogwitd9
Жыл бұрын
@@Quartz_7 I believe oem cost more
@theprogwalrus7564
Жыл бұрын
Don’t use it bro. thing failed on me, not even 5k miles.. broke my axle and my fenders
@Quartz_7
Жыл бұрын
@@theprogwalrus7564 woww...too bad..tq for info
Use a pitman puller to take out the sleeve bro.
@catfissh
Жыл бұрын
Ball joint separator worked for me too. Shit was hella easy