No video
Replacement pollen cabin air filter Ford Focus MK2 DIY (výměna pylový filtr)
How to change the pollen or cabin filter Ford Focus MK2 2005-2010
Ford Focus MK2 1.6 100 HP 74 KW 2009
Jak vyměnit pylový nebo kabinový filtr
Service
How to change the pollen or cabin filter Ford Focus MK2 2005-2010
Ford Focus MK2 1.6 100 HP 74 KW 2009
Jak vyměnit pylový nebo kabinový filtr
Service
Пікірлер: 79
Thank you for this tutorial! When I changed the filter, I was sitting on the passenger side. I just bent over to the driver's side. It was a reasonably comfortable position, so the process was easier than I expected.
Just did this, terrible process, took me an hour or so, and it's nearly impossible to find a comfy position while you're at it. Thanks for showing how-to!
Thanx, did the job today !! Managed to get old filter out without taking accel pedal off, but realised i couldnt get new one back in. So took pedal off ! I really dont think a Ford garage will change this !!. Takes at least an hour, 3 nuts on the pedal, 2 screws on the filter cover. You have to be a contortionist to get your body into a position to take things off and everything back on.
Thank you a lot for this video it was very helpful it takes me about one hour to replace the filter very bad position especially if someone has big body like me. It was the hardest work I did in my ford. Very stupid location for filter I don't know why ford makes every maintenance hard I believe their designers are the worst
I already disassembled the passanger side when I saw this video... aaaaargh :) thanx for the video bro!
Ford's usual remove-half-of-the-car-to-get-there-and-try-not-to-get-insane game.
I'm about to replace mine today! Thanks for the guide and may God help me! Lol
Thank you! I agree with Troung, after looking at this video I was finally able to replace my filter!
Thanks for the video man! It is real pain in the ass to replace this filter :D
thanks a lot for the video. I was looking for AGES for the information of the location of that filter and now I found it. I kinda wish I didn't. anyway. thanks a lot
Díky za dobrý návod
Thank you guy. Other clipsin KZread are for left-hand-side driver while your video is for right-hand-side. I lost alot of time to find this out.
@liythalhamzah8289
6 жыл бұрын
In other words, this video is for Right-hand traffic, the way most of the world drives.
@keysersoze3062
6 жыл бұрын
You are wrong , this is the LHD version here . RHD ( uk people for example )
@Nick-GR
4 жыл бұрын
@@liythalhamzah8289 LHD (Left hand drive.) means the position of the driver. You are confusing it with Left Hand Traffic.
Remove a pedal to change cabin filter... Nice...
@Nick-GR
4 жыл бұрын
Yeah? You should try to replace the thermostat on the Zetec Focus. You have to remove the alternator with the belt because it blocks one screw in order to remove the intake, which is necessary since the thermostat housing is underneath and between the alternator and the intake. Also note here that it doesn't have a tensioner, so you need a special tool to tension the belt afterwards. Also you have to remove the injector rail, and the vacuum hoses to reach it. Fuck ford.
One more thanks from me. Video is most helpful.
tribute to terror of ford
@MrRohanThomas
5 жыл бұрын
Lol
This looks like a right fiddle!
Nice video! Thank you!
Thank you for this video. This is the only one I can find in youtube. Which direction is the airflow though?
Tohle řešení je totálně k posrání s prominutím. U MK3 už to udělali alespoň od spolujezdce, že člověk nemusí sundavat pedál. Když jsem to měnil poprvé, zjistil jsem, že i mechanik v autorizáku, který to měnil předemnou se na horní šroub vykašlal a nevrátil jej :D
Why didn't they put it behind the glove box like Honda?
Thanks for this video👍
Yes, if I had the idiot who had this brilliant idea... And when we spent only 5 minutes to change this same filter on a C3 car yet smaller, in short!!! One question: do you need an elevator to access the filter; I must admit that I tried to twist myself in all positions without success... Thanks for that video.
If I did not see it, I would not believe it.
@ivanacillikova1185
4 жыл бұрын
fucck ,i get drunk during fuccking changing that shit,...left open ,..means no filter goes back
Thanks allot for video
Parfait merci beaucoup très bien expliqué supers !!
muchas gracias buen video....
For something that should be done every 15;000 crazy.
vdaka michal
çok güzel video olmuş teşekkür ederim
Ottimo video
Does it matters how you turn new filter?? My mk2.5 is just serviced, this filter is changed, but air flow from the vents is still vary bad, like was before. Ventilator is working fine.
@MichalFlash
4 жыл бұрын
Yes. There is an airflow direction mark on the filter. Arrow
@MrIceColdM
4 жыл бұрын
@@MichalFlash Thanks. I just can't believe they made such a mistake
@flippy9133
3 жыл бұрын
@@MrIceColdM RIP
TEBRİKLER
Anyone know if this is any easier on the left hand drive version?
👍 Same place on ford kuga
Je to tak kvůli tomu, že je to snadnější pro auta s volantem napravo. Jelita v uk a všude kde se jezdí na opačné straně to mají jednoduché.
Well Ford that was all pretty simple 😂😂
What's the dimension of the filter?
Thanks for the video but the pedal disassemble is not understood because your hand is all over ther frame...
✋
What is the tool used to remove the nut on the top right of the gas pedal?
@MichalFlash
6 жыл бұрын
hello you need eight or seven on extended adapter for gola
@liythalhamzah8289
6 жыл бұрын
Thanks a lot. I do not know what eight or seven means. Is it the size in mm? And what is gola?
@MichalFlash
6 жыл бұрын
sorry My English is not good, the bolt size is 7 or 8 mm. You need this tools ratchets and sockets www.homedepot.com/p/Husky-1-4-in-Drive-SAE-Metric-Standard-Socket-Set-20-Piece-H4D20SWS/202923517
@liythalhamzah8289
6 жыл бұрын
OK thanks, The nut on the top right of the pedal is the hardest to remove among the three pedal nuts. If you used a ratchet, socket and extension in the very tight area around the nut, then you have a lot of skill.
@arnietwo11
4 жыл бұрын
@@liythalhamzah8289 yes, you just need to persevere, think it was 10mm, took me an hour to change. Car is 2007, and filter was black, dont think it has ever been changed, although Ford had charged for replacement 2 years previous.
Going to ask a yogi to do the job for me
Why did you not unplug the gas pedal, i always just unplug it, then you have a plenty of space 👍
Is this for right hand drive ?
@MichalFlash
5 жыл бұрын
No this is LHD. For RHD it is better change under glove box.
Oh for fuck's sake. Oh well, got to do it today I guess...
@b_g_f_
4 жыл бұрын
my thoughts too
Je to stejný i u Focus C-Max 2005?
@MichalFlash
6 жыл бұрын
Myslím si že je, ale lepší bude když pohledáš ještě video přímo na c-max
@ivanvana5179
5 жыл бұрын
Ano. Focus C-max to má stejné. Dělal jsem to dnes. Akorát nečekejte, že to půjde tak rychle, jako v tom videu. Je vidět, že v okamžiku, kdy vkládá novy filtr, je tam strih. Protože to tam dával určitě tak 20 minut. Aspon mi to tak dlouho trvalo, než jsem ho tam narval. A dost jsem ten novy poničil. Musel jsem to tam narvat úplně na sílu. Když odmontuju plynový pedál, tak tam ještě překáží pedál brzdy a sloupek řízení a nevim co všechno mi tam ještě překáželo. Neni tam ani vidět, natož tam tak hýbat rukama. Blbější místo pro ten filtr už nemohli vymyslet. A být třičtvrtě hodiny zkroucený v prostoru pro nohy před sedadlem řidiče je taky lahůdka. To je tak pro někoho, kdo váží 50 kilo. Bylo to trápení.
Who the hell put this thing here..... On the upside, RHD model is aruguably worse.
@arnietwo11
4 жыл бұрын
Why ?? I would have thought easier as no pedals in the way ??
@Nick-GR
4 жыл бұрын
No. It is much easier because you just remove 7 torx screws, then you remove the glove compartment and its door (it is snap on), unsnap the leveling lever, and then you remove the safety fuse box underneath and its metallic holder,. In total you remove 7 torx, two nuts and three screws more that holds the filter cover in place. You can easily do it in 20 minutes. It is easier because you have easy access to everything. Plus the screws that hold the pedal down are tight till the end. It is really painfull to remove the pedal, takes a LOT of time.
Who came up with this design? Took me two hours hanging upside down over the front seats to get this done.
@RabeaHussain
5 жыл бұрын
Lol i even tried that ..I couldn't do it still blood rushed to my head felt headache ..after 2 hours will try tomorow again to reach the top screw of accelerator and filter cover ..it really a hard position no power In hand at such complicated position and the damn socket just wont go on it .. :((((( why ford whhhhhyyyy
Jakby nie mogli dosjcia zrobic z drugiej strony - od schowka. Wymiana by była duzo prostsza a tak chuj!
Ford's biggest design foolishness after the lack of interior boot open handle of course. And all this mess cause they kept the same design from the right steering side models, only that on those models there are not pedals to remove. Fortunately they fixed those issues on the future models.
@Nick-GR
4 жыл бұрын
Imagine removing the pedal only to find out that one of the screws for the filter cover is striped and you need an extractor! This is what happened to me today fixing a friends car. After we finished (yes we didnt change the filter)... guess what? The hood stuck closed! Funny huh?
fuckin' ford ingineer
what the actual fuck
Ford enginers god bless your sins😈.
Fuck me, I like the way he talks you through it Not
This looks like a right fiddle!