Replacement Hot Toys DeLorean 2 LIVE UNBOXING - Will it be broken again?
Автокөліктер мен көлік құралдары
#delorean #dmc12 #backtothefuture #hottoys Disclaimer:
Due to factors beyond the control of DeLoreanTECH, we cannot guarantee against improper use or unauthorized modifications of this information. DeLoreanTECH assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. DeLoreanTECH recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of DeLoreanTECH, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not DeLoreanTECH.
Пікірлер: 45
Flipping the car over to reach the wheel brackets seems like the safest way to pull the wheels out
@DeLoreanTECH
Жыл бұрын
Yes I took notes from Danoby2 -- just make sure you have it on something soft like pillows so nothing else breaks
This wasnt a review, more like a GMC autopsy Lol! Very informative, thank you. Youre the Bob Ross of DeLoreans!
@DeLoreanTECH
Жыл бұрын
Thank you my man! Just trying to help out the community. Cheers 👍🏻
Glad the replacement was ok.
@DeLoreanTECH
Жыл бұрын
Thanks -- same here!
Glad to see your replacement came out ok my dude. I just opened mine the other day after having it sit in the box for like 2 weeks 😅 fortunately, the only thing wrong with mine was the passenger seat came unglued right out of the box (an easy fix). I followed the same thing with pulling out the wheels upside down and didn’t roll them. That was really good advise, no breaks or stress marks 👍🏽
@DeLoreanTECH
Жыл бұрын
Glad to hear! And thanks. Yes the seat would be an easy fix. Cheers!
Excellent, methodical problem solving video. And without all of the drama of the other guy. Looks like 3 clicks and applying gentle pulling force to the axle portion of the mechanism will do the trick. And thanks for showing the wheel rotation. I was wondering how they would allow it to rotate and not break the electrical connection. Pretty creative solution, actually. Mine is coming from Australia to US so seeing this is very helpful. Thanks!!!😎
@DeLoreanTECH
Жыл бұрын
Yes apparently it is 3 clicks now. You think they would have mentioned that important detail in their instructions (Gripe #10/10). Thanks for watching and good luck with your DeLorean!
Very good information and straightforward to the point! Glad this one was not a defect like the other. Well done mate
@DeLoreanTECH
Жыл бұрын
Thank you!
My replacement came yesterday too but now the lights where not working. 3rd time might be perfect one lol. Great video. My first one had the wheel broken.
@DeLoreanTECH
Жыл бұрын
Wow sorry to hear. Third time’s a charm they always say. Good luck and thanks for watching
@user-dk3up2nl1m
6 ай бұрын
What? Were some defective??
@knightslade2007
6 ай бұрын
@user-dk3up2nl1m my first delorean had a broken axel. Second had bad light up features and the 3rd was perfect lol
Probably best to loosen those screws in the corner first before flipping the wheels down.
@DeLoreanTECH
Жыл бұрын
Agreed, if the wheels offer some resistance. I read/saw somewhere that in some cases these screws were over-torqued.
@Collection_Obsession
Жыл бұрын
Having not received my DeLorean mk2 yet, where are these 4 screws that you mentioned? Are they on the struts or on the back side of the wheel hub? Thanks! BTW great unboxing videos and cautionary info.! Thanks. Will you be getting a Marty and Doc to display with your DeLoreans?
@DeLoreanTECH
Жыл бұрын
@@Collection_Obsession the screws that hold the ‘control arm’ to the ‘axle’. Basically the black ones on one side that hold the strut assembly together. But only loosen those slightly and carefully so as not to strip them. If they were over-torqued you might see a stress crack. Choose your screwdriver with care. Also note the one located closest to the center of the vehicle may be hard to reach, so try the three that are furthest away. The wheels should flip down without much resistance. I didn’t have to loosen mine but that doesn’t mean you won’t have to and its a good precaution. As for Marty I have the Marty 2.0 with Einstein but no Doc (yet). Soon I hope!
@davidjames1389
Жыл бұрын
@@Collection_Obsession It's just that screw at the corner of each strut you see in all the reviews.
I had the same experience with the front it was as dark as the mk1.
@DeLoreanTECH
Жыл бұрын
Good to hear
I thought it was going to be a regular matchbox size
@DeLoreanTECH
Жыл бұрын
Nope this is 1/6 scale! Hot Wheels / Matchbox is 1/64 scale 🙂
Que bueno que si te lo cambiaron y este esta bien.
Looks like there is no more paint spatter on the bottom right?
@DeLoreanTECH
Жыл бұрын
Hey Mike. Nope it’s still there. Camera probably doesn’t show it too well.
Thanks for sharing the tips. I got mine yesterday and wanted to check out some videos before unboxing my own.
@DeLoreanTECH
Жыл бұрын
You bet. Hope they helped
I will need lots of prayers with my 3rd replacement tomorrow. Great videos brother
@DeLoreanTECH
Жыл бұрын
Good luck!
Hot toys did it again! This thing is a real collectible! How many of them will be in pristine condition in 3 years? Their value will grow a lot!!!!!
@DeLoreanTECH
Жыл бұрын
I would agree but depends also on how many they make and what the demand will be!
I decided to go with Jazzes Batmobile’66 can’t beat the quality 👍
Are they available to purchase from you?
@DeLoreanTECH
Жыл бұрын
No you have to buy them from places like Sideshow Collectibles. Here's the direct link: www.sideshow.com/collectibles/back-to-the-future-delorean-time-machine-hot-toys-910430
Thank you for the vidéo 😉
@DeLoreanTECH
11 ай бұрын
You're welcome 😊
So, its exactly the same as the one you sent back, what was the point ?, The big issue is the speckling,
@DeLoreanTECH
Жыл бұрын
The LEDs on my other one didn't work right
I have a question for you if they were to do another back to the future movie what version of the delorean would you like to see again? The version from part 1 with the plutonium chamber or the Mr. Fusion version with the flight capabilities in part 2 or the version from part 3 with the 1950's tires or the train wheels on the train tracks?
@DeLoreanTECH
Жыл бұрын
Definitely Part 2 with hovermode and Mr. Fusion! Always been my fave version of the DeLorean. Let’s face it, when the Time Machine appeared at the end of Part 1 with its new hover conversion and Mr. Fusion, it had truly reached it’s peak in terms of overall sci-fi coolness, badassery, and perfection. The other versions are cool but are either just precursors of what’s to come, or salvaged versions of what used to be. Go hover, or go home (to 1985) 😅
@jeahavvalentin980
Жыл бұрын
@@DeLoreanTECH Same here with me in wanting to see the version from part 2 with the hover mode making a comeback if they ever did another back to the future movie. I hated the version from part 3 which for me was a complete downgrade from part 2 and definitely not a fan of the flying train at the end of part 3
Hot toys built this like absolute shit!!! Bad form on their part.