I think you made the right decision not doing the extra work on the doors. It's supposed to be a work van, not an exhibition vehicle and offering it at this low prices gives potential customers the chance to decide for themselves. Very nice little project and you did really well once again.

@johnchincotta1qwdb15

Жыл бұрын

Indeed Teebo DK,at the end of the day,it is what it is,call it a work van, or a work horse.It will end up with more dents and scratches,and most probably runned to the ground specially if it's purchased by a building company.

A work-van must have dings. It's a sign of a hard-working person.

Cheap van. No need to do the back doors if it's going to be a work horse

@nickmaguire4914

Жыл бұрын

If it's a work van wouldn't be long before the doors were dinged up again anyway. Doors always cop a flogging.

@liams1991

Жыл бұрын

But this is Rob and Chris. Nothing short of perfect will do.

That'll sell for £3995 straight away, an ideal little plumber or electrician van, people who won't be fussed about the back doors, they function well enough and don't look that bad. Certainly wouldn't put me off.

Great practical van for someone. I would love it. You Chris and Aiden have done a fantastic turn around on this vehicle. I never miss a video of you guys. Wouldn't mind a bit of an update on Chris's boat but I know you guys have countless projects on the go so I will just have to wait and see. 👍👍👍👍👍

It's the 1.5 diesel Renault K9K engine used by Renault and Nissan across their ranges including Juke and Qashqai. It's pretty bombproof and produced in Renault/Nissan Alliance unitshops all over the world.

Perfect guys, you did as much as that was needed it'll sell 10 times over no problems 👍

Citan - different dash, front end, rear doors & rear lights

Van doors are so expensive and hard to find because so many are being broken into.

Great job guys. As Chris was unpacking that door round by the Disco, I thought "If that falls over and dinks the tailgate, 'there will be swearing on the channel'

The best part of Friday after work is when you guys drop the video

Another great result. You are right in nor fixing every mark, it’s a really good cheap work van that will do someone proud

Very enjoyable video Rob, some are easy, some are a problem. You do a great video and a great service by reclaiming damaged vehicles for further use, well done!

Mon, Wed, Fri - I genuinely look forward to these videos. Love them all

All it needs is take it to the car wash and clean out the interior before you deliver. Don't worry about the back door, or the minor scratches, most users won't care so long as it runs good.

As always thoroughly good tea time entertainment, thanks chaps 👍

Quick turnaround guys this little van !! Cheap van to !! Fantastic video yet again !! See you in the next video!!

Put a window in the old door and put it up on EBay or save it for Chris’s micro camper. A great mail van for the USA. Postal delivery. Great buy gentlemen.

Perfect video getting that van turned round quickly guys keeping the cash flowing for bigger and better projects 😊 Always a pleasure watching you two fixing um up and getting them out the door at a fantastic price and that’ll be a great work vehicle for someone 🤩

1.5 DCI engine is very reliable I've got a 2002 MK1 kangoo 163000 miles and counting . Dacia also use the same engine as well. On the old door cut out window hole and sell it on as Will get you your money back you paid for replacement 😉

That could be the quickest turnaround ever. I think that will sell as is, it being a work van. A stroke of luck with the side door there Gents, no one can moan about that. Chris hammered the back door too, not bad. Thanks Rob and Chris for another good video I hope you both have a great weekend. 👍👍

Easy quick turn around 👍👍👍👍

Nice little van!!

Great video thanks Chris and rob

Excellent video again from you both. Out of all the channels I subscribe to this is my goto one for enjoyment, courtesy and downright honesty. If I were looking for a particular vehicle I fancied and you had it on the channel I would not think twice about trying to purchase as soon as it was advertised because I know that I wouldn't be getting caught by such two genuine guys in the trade. We could do with more businesses like yours. All the best to you both in your continuing business. Just waiting for the next.

An another great result gentlemen, well done

Made a nice little van,cheers guys.

Another great job. Cracking little van for someone. Thank you 🙏

That will be a great little van for someone, have a great weekend Rob and Chris 👍🏻

Great little van Rob and Chris 👍👍 it came up lovely

Lovely looking van easy repair for you great stuff.

If you were so inclined you could cut the damaged window section out and sell the old door to recoup the money on the new door. Good job and nice little van

Nice job, Rob and Chris, good finish in the end.

Great video , what a result with that side door Curtis did a lovely job on the back door a nice van all in good luck 🤞 guys 👍👍👍

Thanks for another great film. A very fair price I'd say. Only thing going against it is Cat S but if only relating to the doors then worth every penny.

Nice little van for somebody just starting up.Well done ✅ a nice little turn round 😉👍

Nice little van , done very well with that door👍

PRS passed rectified at station

PRS - Pass after Rectification at Station. Defects can be fixed within one hour after the test and before being recorded.

@sruk

Жыл бұрын

👌 thank you 🙏

That van turned out ok you got a result on that side door looking forward to the next video 👍

Chris should fill the back doors and paint them himself. His painting is good enough.

@inchaseable1

Жыл бұрын

Yes I don't understand why they didn't

@ryanrichardson9044

Жыл бұрын

Probably coz there busy 😅🤷

Great video and work as always Rob! :D

Easy fix guys and nice turn-out as usual.

Great job Rob & Chris,a nice straight foward fixs this time,have a great wkends guys.

Great stuff Rob 👏

Great on, Rob.

Great job, as someone who made a decent living with work vans, let them go with imperfections. A guy starting out might be able to scrape up 4 but not 5. I started out with a borrowed 4 door Buick, then a Dodge mini van, then a full size Dodge van and finished up with a Ford E-350 stretch cargo van. Autos are different on the market and they are all about curb appeal or status. By the way, speaking as someone who has seen more Prisons than Schools, that wasn't a secret compartment. Rob, I could see how excited you were but I call them the way I see them. Keep up the great work guys.

thankyou gentlemen,,and a well deserved profit for you both,,have a good weekend,👌👍

What a cracking little work van ..👍👍

Great little van lads

Great turnaround.

Great video guys

Going make someone a nice little van.low milage good bodywork.good little work horse.Another cracking job Rob and Chris.

Another super turn around lads as always thanks for all the videos yous do for us 👏👏👏👏👏👏👏👏

Right result guys! Fab little van

Spot on guys Brilliant result and won't be around for long

Rob and chris keep these great video s coming they just get better and better my 5 year old daughter is your number 1 fan lol and she knows monday wednesday and friday is chris and rob day when she finishes school and she even said the timing chain on the range rover she wasnt happy cause chris didnt fix it god love her keep up the great work guys

You've done a lovely job on that van. Someone's getting a nice little bargain, there.

I added a PDR pulling tower to the workshop - should have built one years ago - you & Chris would love one, Rob - it saves panels that would otherwise be binned, like where there's no access to the back of the panel. Did a Fiat 500 quarter that was otherwise big body-work/respray due to zero access to the back of it (it's the double wall bit) only today - see that original van back door, that's an easy fix tbh, be a doddle.

I had one of these great on fuel. Had to get a transit custom for more room or would of still had it. Nice job lads

what a great van....perfect as is....no need for any more work.....its a works van ready to go back to work....great video

Top result with that door!! Nice van - ready to go. BTW, you don't sound like a parrot!! 🦜

That’s a great profit return for a low outlay, well done 👏🏻

For bodywork dents that are hard to reach I would suggest getting some air bags that you could put between the dent & the door frame. Inflate the airbag in different locations in the area you need to work on & Bob's your uncle dent mostly gone.😃😃

Great job guys,what a bargain that door was especially Inc post as on a pallet so not cheap,bargain for someone,have a great weekend guys👍

Great price for the van. That was a fantastic bit of luck finding that door. I'd be very surprised if it doesn't sell. I don't think the odd bump and scrape will matter one bit, the mileage will clinch it, I think. Great video. 👍

Lovely job lads 😊

Rob waffle one of the many things that make these videos great tks.

You have done well with the whole project. It's a good van no one is probably worry about the odd ding and dent

It's quite a tidy van! At the end of the day, it is a work van and for someone young just starting out, something like this is exactly what they are looking for, so I think that your decision to sell as is, is a good one.

Nice van for a Friday. Don’t worry about the doors, some apprentice will have them dented within 24 hours of purchase. Have a great weekend guys 👍

A fantastic job for a quick one lads. 👍

Great turnaround, good little van, another one done, sorted lads 👍👍

Lovely little van 👍👍👍

Rob and Chris you have done a great job no the van a great price love your waffling on always look forward your great video

I was a bit concerned when Chris started slashing with the knife . . . . good job your mates 😄

Lovely little van

There are loads of these vans about here in Alicante. The scrap yard near me (so not any help to you two) have hundreds of doors at one of their storage yards, and cheap too. They will even fit them if required. Brilliant vans, you'll sell that easy.

@inchaseable1

Жыл бұрын

Good bit of useless info

Great video, Rob & Chris, and a nice van, as is, for someone in the trades or just as a knock around vehicle. Chris is definitely a guy who can tease metal back into shape, and I'm sure he would have made this one look like new, had he continued, but not worth it in the long run. Thanks again for the great content.

another cracking video guys and what a turn around and I'm sure that van will go quickly can't wait to see what's next on the channel keep them coming 👍👍💯💯💯

Hello Rob and Chris, good result re the side door. Great little van that will be a work horse for someone. Seems like a very good price. Thank you for taking the time to upload another video. Ged

They with need to form an orderly queue to get that van! Nice little earner this time, well done. Have a good weekend.

Cracking little van, will sell no bother as it is 👍

Cheers guys

The genius worked his magic as always Great vid as usual guys 👍👍👍👍👍

Another one bites the dust ! That'll sell so quickly guys , well done !

Top work and a nice quick turn around with a nice profit. Cheers for the video take care

liked the unpacking video of the door!! you could use some of the packing to list the damaged door back on eBay?

Lads looking forward to this episode my Mrs never watched any of your episodes before and she can’t wait to see what happens to the van 😂

Looking forward to the next video always interesting

Great job as always.

That's a smart enough van for the money and low mileage too. Great result on the side door!

Fabulous again fellas a lovely good cheap and easy flip 😀 turned out a lovely van. Someone is going to get a cracking motor and fair deal as usual, take care fellas stay lucky and healthy have a great weekend looking forward to Monday already 😀

You’ve done it again! I have no need for a van but I’m desperate to buy this one. Well done I’m sure it’ll serve the new owner well.

Another great van coming from a unusual source. Great price for a work van for somebody. Good result with the side door guys.👍😎

Chris is truly talented.

Cracking job Rob as usual. Only advice would be, when deleting all codes like that, save a report first. The deleted codes could be crucial to diagnosing a fault and sometimes they don't come back.

Great find that door mate 😀👍👍 great price and nice profit 🙏 great job guys

Good little work horse. Well done chaps.

That will fly out lads👍