Repair the hydrostatic transmission a Tuff Torq K46 (Lawnmower Stiga Park)
Ғылым және технология
Stiga Park Senator riding lawn mower (Refurbish the hydrostat Tuff Torq K46)
Today I will disassemble the hydrostatic drive on a Stiga Park Senator. The lawnmower did not move forward or backward. It also leaked a lot of oil from the gasket at the drive shafts
The oil leak was due to 2 worn out gaskets, and the oil leak caused scratches in the pump house
The riding lawnmower is powered by a briggs and stratton 15.5 hp
Equipment that I use in my homestead / Maskiner som jag använder på gården
WoodMizer Lt15
Wood work
Logosol ph 260
Chainsaw Stihl 361
Chainsaw stihl 251
Chainsaw stihl 192
Husqvarna röjsåg
Zetor 7045
MF35 (massy ferguson 35)
Land Rover defender 110
Hymas 474
Atlas Copco Cobra 148
Sampo rosenlew 360
McCormich 46 baler
Kellfri 185
Honungsslunga 4-ramars självvändare / 4 frame electric reversible honey extractor
Potato’s extractor/ potatisupptagare
Berg 3:10
Пікірлер: 39
Wow many thanks for this video. I always wondered what the K46 looks inside. Incredible level of information.
@berg310tor-arnejonasson8
10 ай бұрын
Thanks a lot
This really helped me a lot! Thank you so much dear Sir!
@berg310tor-arnejonasson8
2 жыл бұрын
I am so delighted to be able to help!
thank you , it help me alot to fix my transmission
@berg310tor-arnejonasson8
Жыл бұрын
Thanks! Nice that it helped a little
💥💥 Please subscribe and press the like button ... 🙂 and if you want, please write a comment 😁 💥💥 💥💥prenumerera gärna och tryck på gilla 👍 Och om du orkar så skriv en kommentar 💥💥
Very nice teardown..and good info..my k46 suffers simmiliar (loosing some power when really hot). I wondered if pumps could get machined to remove marks..and you answered that question (i would hate to buy rebuild kit - costs a fortune ).
@berg310tor-arnejonasson8
Жыл бұрын
Thanks and good luck!!
Thanks for the video . Greetings from Denmark . I subscribed 🤗
@berg310tor-arnejonasson8
Жыл бұрын
Tanks for watching 🙂
Min kasse har ingen drivning längre. Saknade inte olja. Filtret såg illa ut. Kan det göra så att man tappar drivningen? Undrar oxå på om drivningen kan justeras med den bulten som har fyrkantig bult huvud med en låsmutter på? Tacksam för svar
I wonder which bolts were to drain the oil?
Great video. I have a question you might be able to help with. I have a 1990 Ariens tractor that is have a issue. The mower wont move forward and make a whining sound...it move backward strong and fast...just not forward. The belts seem to be tight, the fluid seem to be full, the linkage seems to be moving. The mower is in super good condition and hope to save it. Any help would be great...Thanks
Thanks for your documentation about disassembling the transmission! Am i right, that you filled it up to the top With oil? I Saw some other Videos about changing fluid and they used about 2 Quarts (2 litre). Thanks for your work and keep up the work and swedish talking in the background. Always nice to have friends around while working on engines and other things
@berg310tor-arnejonasson8
2 жыл бұрын
Hi! And thanks for your comment. In this drive it should be filled with oil and then on the lawnmower there is a small container that shall be filled. Unfortunately I don’t know how much oil I filled because I used a pump. But any way this one should be absolutely full Thanks and have a nice day!
Can you show the process for polishing the pump?
@Tinyhomefixers
16 күн бұрын
Jag vill gärna också se det🙏🙏
Would have like to see how you polished the pump. That's like the main issue.
@berg310tor-arnejonasson8
Жыл бұрын
Well, I agree that it would have been nice to see but it’s quite simple. It’s just a face honing machine with a manual pice holder. But I did it in the factory wher I work and ther is no photo or filming allowed So sorry about that!
Hur mycket olja går det i ungefär ?
Hi! I made the rebuild but when i use the mower the forward end the backward exchanged?! What can be the problem?
My mower loses power when hot to wear it will barely even drive I'm at the point where I need to tear down this transmission I'm not sure if it could just be a clogged filter or if maybe there's a problem with the axle seals. When I change the oil in it it was very very hard to fill up the transmission again because it didn't want to take any oil I had added a little bit at a time and it took me a whole day to get a level back in it I'm not sure why that was. Do you have any answers or advice
@berg310tor-arnejonasson8
Жыл бұрын
Hi! To fill the oil faster you kan remove the plastic plug as shown in the video, this vill make it in a few minutes. About the drive it sounds like the there are some scratches on the hydraulic pump or motor. Then it needs to be reworked. Best regards Tor
Great video! one question: What did you use to polish there center base plates?
@berg310tor-arnejonasson8
4 ай бұрын
I have a lapping machine at work, manual but high precision
If my lawn mover after moving up all to one side iand after putting back to driving position is starting to drive heavy and i heard the sound so it means that oil is missing or there is more trouble ?
@berg310tor-arnejonasson8
3 ай бұрын
It’s very difficult to say with out knowing what kind of gearbox and drive it is
Jag har en stiga tornado 2098 från 2014 och har märkt att den är väldigt trögväxlad. Det är ju ingen hydrostat på den men finns det olja eller fett i den transmissionen?
@berg310tor-arnejonasson8
4 ай бұрын
Hej! Ledsen men jag har ingen aning, har aldrig tittat på en sådan. Mvh Tor-Arne
Is any way to polish the surfaces by hand?
@berg310tor-arnejonasson8
Жыл бұрын
It depends on the damage, if it only scratches it can be polished by hand. In other cases you need a good lapping machine
Vad var det du gjorde med pumpmotorn mer exakt? Mvh
Great video
@berg310tor-arnejonasson8
5 ай бұрын
Thanks a lot!
I have a- k51A-sBr.
Hello, what oil you used?
@berg310tor-arnejonasson8
Жыл бұрын
Hi, I used Standard 10W30 oil. And have done so for many years
I was hoping to see the resurfacing of the parts.