🇺🇸/🇬🇧 Repair of the most common RT6 radio fault (Citroen/Peugeot), including extraction from DS5
Жүктеу.....
Пікірлер: 136
@mikescudder46212 жыл бұрын
Nice one.... cheers for showing the procedure.
@piotrkozlicki6400 Жыл бұрын
Bardzo bardzo długo trwa wgrywanie softu. Długo czarny ekran musisz cierpliwie czekać ale gdy już jest pendrive nie powinien wciągać napęd ekran długo czarny
@roderickmanickam95914 ай бұрын
Hello Tomasz. Thank you for the videos it is very helpful. I had a problem with my denon system so i got a replacement( second hand) everything thing works except for the sound. What could be the problem. From Durban South africa.
@ewelina_kaАй бұрын
Hi Tomasz, thanks a lot for the video. Just one question please: you replaced the SD card but also charged/reinstalled the new firmware with an USB or you just replaced the SD card? Thank you very much in advanced!!!
@TomaszPlawski
Ай бұрын
The firmware sits on the SD card, therefore when you replace it with a new card you need to do a full fresh load of the firmware
@ewelina_ka
Ай бұрын
@@TomaszPlawski many thanks for your prompt response!! Milego weekendu
@ewelina_ka
Ай бұрын
@@TomaszPlawski unfortunately it did not work for me 😔 I have tried with 2.85 and 2.86… trying to upload it through usb and CD. In case of CD it is directly extracted after a few seconds/minutes. In case of USB appears a message saying “CRC media checking” and then, after a few minutes “CRC error on media”. Any ideas? Thanks 🙏🏻 in advance
@TomaszPlawski
Ай бұрын
@@ewelina_ka did you burn the cd from an ISO image? As for USB CRC errors these occur most commonly when you load the files but don’t clean the “garbage” windows writes to the pendrive … you need to delete the “system volume information” see below You can Google how to remove this using command prompt. HOWEVER: Once removed if you re-insert the memory stick back into your PC to check its gone, it will automatically put this file back. So once completed do not put it back, if you do go through the process again. You have to be logged on as admin and set up to show hidden files and folders.
@ewelina_ka
Ай бұрын
@@TomaszPlawski hi Tomasz, many thanks again for your support, internet is a better place thanks to people like you 👏🏻 Coming back to the topic, yes I did in the way you explained , however I did not check the garbage files windows adds, maybe this is the problem… In this case I have also seen on internet the original cd firmware for around 20€… Maybe it’s worth to buy it to be sure where the problem comes from. Have a great Sunday!
@infernossg3101 Жыл бұрын
Hi sir just a few questions im just confused as ive never done this before, 1) i took out the old 8gb sd card should i replace with new blank/empty 16gb sd card or do i need to add files to the new 16gb card? 2) once the sd card is inside and the box is placed back inside the car all screwed back up do i then try the usb? 3)what do i put/install on the usb pen drive to update?
@TomaszPlawski
Жыл бұрын
1. OK, blank card 8 or 16 GB must be FAT format 2. Yes 3. You need to find the firmware online and put it on the USB pendrive or burn a CD from an ISO image and install from that. For the files you can google using phrase RT6 2.86B firmware, for the moment it looks it should be available here www.peugeotforums.com/threads/how-to-update-to-2-86b-on-rt6.213202/ along with some instructions. If you are just copying the files to a pendrive vs. burning a CD from an ISO image you have to remember that windows likes to add it's various "garbage" files/folders which needs to be removed, otherwise the Radio will do an error check and discover the CRC doesn't match ... there are instructions here frenchcarforum.co.uk/forum/viewtopic.php?t=63227 as how to create a .BAT file and how to use it to remove the unwanted files. PS after succesfully running the BAT remove the pendrive - trying to list the pendrive contents in windows can cause it to write these to the pendrive again. When installing you need to be patient as the screen can remain blank for a very long time - if the files on the pendrive happen to be corrupt/CRC is wrong you might not see a message on the screen, but you will here a noise of it trying to eject a CD after which it resets and falls into an endless loop repeating the whole procedure - you will then need to try creating a new pendrive from a different source. 4. and here's where the real fun begins depending on the firmware source it won't necesarily match your car make/configuration. You might see a Peugeot logo instead of Citroen and vice-versa. The steering wheel and panel buttons don't necessary match the relevant functions. Your bluetooth audio might have an echo to it (needs to be matched to the interior "geometry" and audio system you have installed). You might not see the hybrid information screens, or see them (like I do now, even though I have a regular engine) etc. etc. To fix these you need to load the apropriate user configuration file and for this you need to look around eg. you can try here cartechnology.co.uk/showthread.php?tid=51007 for mine I got help on the Portugese Facebook DS5 group although the files wasn't ideal. fixed all the problems but as a bonus I got extra screens showing hybrid batery loading screens etc.
@infernossg3101
Жыл бұрын
Thank you for the reply.For the SD card once I insert into my computer to make sure that it is formatted to fat32 will I have to do the .BAT file to get rid of the "garbage" files that windows adds
@TomaszPlawski
Жыл бұрын
@@infernossg3101 for the SD card it’s not much of a problem as it will be cleared by the radio when you install the new firmware (therefore no need to take out the radio again) however it’s a must for the pendrive you stick in the USB port for the installation
@infernossg3101
Жыл бұрын
I only have 32gb SD card is that fine ?
@TomaszPlawski
Жыл бұрын
If you will be able to format it in FAT32 should be OK, NTFS will not work in the radio. Ps. the pendrive you use also has to be in FAT32, whilst anything larger than 32GB will be NTFS etc. (FAT32 supports only 2GB-32GB media)
@armandsliepa574 Жыл бұрын
I did the same procedure today. Actually, my RT6 radio has an opening for SD csrd access closed with "service sticker"- so no need to unplug the cables at all. I removed the cables and something went wrong- display is black. No radio, no maps, no sensors...
@TomaszPlawski
Жыл бұрын
Is the radio making any noises… especially sounding like trying to eject the CD?
@LansaDiag
Жыл бұрын
Hello, mine does this! What does this mean? :)@@TomaszPlawski
@TomaszPlawski
Жыл бұрын
@@LansaDiag slowly “decaying” SD memory card in the radio, producing more and more read/write errors
@armandsliepa574
11 ай бұрын
@@TomaszPlawski yes, continuously trying to eject CD....
@TomaszPlawski
11 ай бұрын
@@armandsliepa574 ok, so it looks it's falling in the endless reset loop. Need to make sure that the installed fresh SD card is FAT32 formated (!) therefore max 16 or 32GB. Also the pendrive used for the firmware installation should be FAT32 and you need to make sure it ONLY contains the installation files without the windows added garbage/hidden folder, which it writes to the pendrive as soon as you pop it into the USB (this causes a CRC mismatch when checking if the pendrive is not corrupt, and therefore finding the wrong value with the extra files, the radio continues reseting trying to reload). Procedure for creating a batch file to remove the hidden folder described here frenchcarforum.co.uk/forum/viewtopic.php?t=63227
@friendcars17117 ай бұрын
Hi friend I have PEUGEOT 508 after remove RADIO screen black and Disc sound works motor on off
@sweatkeith252 ай бұрын
I don't know if I missed it but did u copy what's was on the 8gb sd card into the a 16gb sd card then reassemble? 🤔 what was on the USB plugged into the arm rest . I'm experiencing blank screen nd cd noise but nothing coming or ll keep rebooting when it does....
@TomaszPlawski
2 ай бұрын
Copying didn’t work as the original card was corrupted and has this weird multi-partition. You need to pop in a new memory card in the radio (max 16GB) and then perform the firmware upload from usb stick downloading the firmware from the internet and preparing the usb in a special way, so it doesn’t contain windows added garbage which will screw up the CRC value, which the radio checks
@lucasflucas5342 Жыл бұрын
Cześć Tomku mam pytanie ...czy jak wyciągnąłeś radio nie ma tam przypadkiem wyjść RCA pod chinch ???? Albo gniazda do którego można by dokupić przejściówkę ? Chcę założyć wzmacniacz do tego auta a z tego co się orientuję nie wyjść na suba...:( Będę wdzięczny za odpowiedź pozdrawiam serdecznie
@TomaszPlawski
Жыл бұрын
Nie, myśle że trzeba by rozszyć jeden ze zbiorczych wtyków, chociaż rozpiski wyjść nigdzie nie widziałem (aczkolwiek też za bardzo nie szukałem - rozważałem zakup chińskiego radia z Androidem, ale na Ali sprzedają wersje szyte pod konkretne samochodu z kompletem przejściówek „plug and play” to znajomość pinoutu nie jest wtedy zbyt istotna 😏). Nawet jak wyciągniesz audio z kabli to jeszcze mirascriptem trzeba by wybrać odpowiednią konfigurację do pracy ze wzmacniaczem. W opcjach pamietam że były chyba przynajmniej cztery konfiguracje - jedna gdzie radio idzie bezpośrednio na głośniki i 3 do pracy z różnymi wzmacniaczami (pewnie ogranicza poziom sygnałów wyjściowych)
@TomaszPlawski
Жыл бұрын
Z opcji audio w MiraScript jest: "Audio Mode": 0=Normal : internal amplifier () 1=HiFi : external analog amplifier 2=HiFiCAN : external digital amplifier 3=Arkamys : internal amplifier with Arkamys audio DSP 4=Arkamys+Hifi : external analog amplifier with Arkamys audio DSP więc przy klasycznym wzmacniaczu analogowym zdaje się że trzeba by wybrać 1
@tomkluz2 ай бұрын
Witam Tomaszu, takie pytanie techniczne. Czy karta mini SD musi być jakaś konkretna czy tez na przykład taka (SanDisk Ultra 16 GB microSDHC Memory Card A1 App Performance Up to 98 MB/s, Class 10, U1 nie będzie za szybka/za wolan ? I jeszcze czy wkładamy ja czysta sformatowana na FAT32 czy tez próbować przekopiować dane z starej ? Kupiłem z Citroen.navigation najnowsza mapę europy z updatem softemu 2.21A. Czy wystarczy ze zrobię tym update ?
@TomaszPlawski
2 ай бұрын
Czy radio jeszcze cokolwiek “gada”, czy już czarny ekran?
@tomkluz
2 ай бұрын
@@TomaszPlawski czasem się włączy. Szczególnie rano. Na początku reaguje z opóźnieniem na przełączniki i na ekranie nawigacji jest tak jak by polowa mapy, jak by się nie wczytała. Udało mi się wrzucić CD z softem kiedy działało. Długo ja czytał a potem czarny ekran. Później tez miałem momenty kiedy zadziałała ale teraz kiedy jej włożę CD to pisze ze cd unreadable
@tomkluz
2 ай бұрын
Możliwe ze czytnik cd jest walnięty, czy tez cos porąbałem ? Z drugiej strony kiedy działa to działa oczywiście nie wyświetla map ale można radia posłuchać i cos tam poustawiać.
@TomaszPlawski
2 ай бұрын
… nie chciało mi się pisać :) zob. kzread.info/dash/bejne/n6yJ1NquZMW7g84.html
@TomaszPlawski
2 ай бұрын
Przyda się też link github.com/bentalebahmed/Citroen-Peugeot-RT6-car-radio-display-config-via-MiraScripts z opisem robienia backupu konfiguracji radia
@hichemzorgui6783 Жыл бұрын
Yoo thomasz thanks for your video , i have the same problem .DS5 the screen is black and making the same weird sound same like reject cd sound . What is the best thing to do i visited citroen but they are asking to much 1000 euros HELP ME PLEASE DO YOU HAVE SOME OPTIONS
@TomaszPlawski
Жыл бұрын
Most likely the SD card. Rip out the radio, replace SD, load new firmware… and the most difficult part - if necessary, hunt on Facebook DS5 groups for somebody who can provide the config files for your particular model configuration as these aren’t commonly found online… and without this you most likely will end up with a Peugeot logo and steering wheel buttons not working as expected
@ahmetufukyuksek365
4 ай бұрын
@@TomaszPlawski i updated my dad's car but now the denon audio system doesnt work, how can i fix it
@TomaszPlawski
4 ай бұрын
@@ahmetufukyuksek365 could be the wrong selection of external amplifier type/output setup - this can be changed by misrascript frenchcarforum.co.uk/forum/viewtopic.php?t=61033&start=15 "Audio Mode": 0=Normal : internal amplifier () 1=HiFi : external analog amplifier 2=HiFiCAN : external digital amplifier 3=Arkamys : internal amplifier with Arkamys audio DSP 4=Arkamys+Hifi : external analog amplifier with Arkamys audio DSP
@ahmetufukyuksek365
4 ай бұрын
@@TomaszPlawski can i have your config i effed up by installing wrong config
@hycharlison8 ай бұрын
My Peugeot 508 2012 is having the issue of black screen, but no noise like sucking a cd, or anything. I’ve replaced the memory card, placed the firmaware into the memory stick, plugged into the usd port in the arm rest, ignition on for 25 min … nothing. No signal… no information displayed. I don’t know what else to do. 😢
@TomaszPlawski
8 ай бұрын
I'm afraid can be much longer than half an hour before the initial "upload" completes and anything appears on the screen. Unfortunatelly the eject noise is the only indicator of potential errors on the pendrive which prevents the firmware from loading (when there is a CRC error, the radio reboots and tries to repeat the process) As an alternative you could try downloading a CD ISO image and burn that onto a CD and try to install from that. PS - what size SD card did you put in the radio? Recommended is max 16GB, some reported that 32GB works as well, although either way, it must be formated FAT.
@hycharlison
8 ай бұрын
@@TomaszPlawski I used a 16g, never used. I inserted the memory card in the head unit and assembled all again, plugged the pendrive, which contained the firmware and I erased the windows files, leaving it like you guys recommended.
@TomaszPlawski
8 ай бұрын
Should be OK then, just a bit more time.
@hycharlison
8 ай бұрын
@@TomaszPlawski I will try and tell u here.
@jasonjones14363 ай бұрын
Hi Tomasz, I have a Peugeot 308 (2013) 1.6 HDi. My sat nav screen is now permanently black, and my CD player is constantly making an ejecting noise. My mileage has also changed from miles to km. Is this an SD card issue? 😊
@TomaszPlawski
3 ай бұрын
99.9% chance that this is the SD card failure
@jasonjones1436
3 ай бұрын
Brilliant. Am I correct in thinking I will need a 16gb Micro SD card and a 16GB USB stick?
@TomaszPlawski
3 ай бұрын
Yes and yes
@juraj2pesta211 ай бұрын
Hello Tomasz, do you thing that this could also be the same problem with RT6 ? My radio sometime randomly takes 15 minutes to boot, most of the time it is instant, but other times not, could be SD card issue ?
@TomaszPlawski
11 ай бұрын
Yes. With the card failing it does so gradually, dropping random memory „cells”, sometimes being able to read/write to them, sometimes not, and depending which data is affected, the symptoms can also vary. But probably 99.9% of the cases, when something wrong starts happening with the RT6, it’s the SD card.
@TomaszPlawski
11 ай бұрын
1 thing to remember when installing a fresh SD card and doing the firmare load: card must be MAX 32GB (recommended 16GB) and MUST be formatted FAT32 (not NTFS!)similar thing with the pendrive as the radio might have problems reading different formatting firmware download with instructions amongst others here: www.peugeotforums.com/threads/how-to-update-to-2-86b-on-rt6.213202/ otherwise if that doesn't work you can google for "RT6 2.86B firmware" and download elsewhere when preparing the pendrive you need to remember to remove the garbag files windows will add to it (instructions for preparing and running a .BAT file below) frenchcarforum.co.uk/forum/viewtopic.php?t=63227 You also need LOTS of PATIENCE as the radio screen can remain blank for half an hour or longer during the initial installation, where during the whole time you needto keep the engine running (so the car doesn't go into power-saving mode) and a good ear as you need to listen if there are now CD eject noises ... this happenswhen the radio discovers some errors on the pendrive (eg. if you didn't correctly remove the windows garbage files and thus the CRC is mismatched) and will resettrying to reload and then again and again falling in an endless loop. Normally when you do a firmware upgrade it shows a message that the CRC is bad, but with aninstallation to a blank SD card it doesn't have any software to handle the display and unfortunately the blank screen for the whole time. And that's just the beginning of fun. Once installed the firmware is "bare", not necessarily matching your car configuration (type of audio system, equipment options etc.)although maybe with Peugeot you will have more luck. When I installed in my Citroen the buttons on steering wheel and front pannel were mismatched, the rear cameradidn't show the guidance lines etc. For that you need to load the relevant user configuration files and therefore need to look around on the forums, facebook user groupsetc. for some "magician" who will be able to send you these. I got mine from a Portugese DS5 user group and they are not ideal ... they came from a hybrid engine versiontherefore I now have the radio show the additional screens for like the loading of the hybrid batteries etc. which my car obviously doesn't have. However, fortunatelyeverything else works ok.
@viltotzlatanov8512 Жыл бұрын
Hello, I have a problem with my multimedia Peugeot 3008 (2009-2013) RNEG. Radio and display restarted every 30 minutes. The software is updated to the latest version, but the problem still exists. I tried with a reboot. No changes. Any idea what is wrong?
@TomaszPlawski
Жыл бұрын
most likely the same - SD card dying
@kiminho01759 ай бұрын
Hi Tomasz, How did you Get the sofware at the end for the update?
@TomaszPlawski
9 ай бұрын
The firmware to put on the pendrive? Eg. Here www.peugeotforums.com/threads/how-to-update-to-2-86b-on-rt6.213202/
@kiminho0175
8 ай бұрын
@@TomaszPlawski thanks to your video I manage to get my screen back! Its in Czech now, do you know how to change the language ? I have a Citroen DS3
@TomaszPlawski
8 ай бұрын
@@kiminho0175 I believe it all depends on the firmware image file you got. Mine allows for selection of a few different language versions from the settings menu, but I have heard that with some installs people had that menu hidden and then had it changed by visiting the official shop (where sometimes they also didn't know how or wanted to rake in the cash and were proposing to replace with a new radio). You can try mirascript and dataexplorer as described here www.peugeotforums.com/threads/radio-changed-language-to-czech.355892/ to unlock the language selection screen ... if you figure out the exact steps be sure to post a video about it - there will be many gratefull people as it seems to be a quite common problem ... I would go the "brute force" method and try clearing the card and reinstall firmware from different sourc ... again and again ;)
@TomaszPlawski
8 ай бұрын
@@kiminho0175 ... In "user.config.dat": * Unlock language selection: 1.6: Display data Field "1.6.98: Language selection option in setup" value=0 change it to 1 You need "Mirascript" and "DatExplorer" utilities. Extract the "Mirascript" archive on your key and keep only the "RT6_USERCOM.CMD" file from the "CMD" folder. Connect the USB key to the RT6 and answer "YES" to the script execution request. The script will ask to launch the "WRITE" command to which you will answer "NO". The script will then ask to launch the "READ" command to which you will answer "YES". Wait for the script to finish executing before unplugging the US key. On your PC, make a copy of the "User_config.dat" file on the USB key. Extract the archive of "DATEXPLORER". Launch "DATEXPLORER" and click on "Load Config", select the "RT6_2xx-user_config.dat" file. Click on "Load Dat" and select the "User_config.dat" file at the root of your USB key Navigate to the section indicated above and make changes indicated. Click on "Save" and remove the USB key from your computer. Connect the USB key to the RT6 which will ask you to execute the "USERCOM" script, answer "YES". The script will ask to launch the "WRITE" command to which you will answer "YES". Wait for the RT6 to display a message asking to reboot. ESPECIALLY DO NOT ANSWER YES. It will be necessary to press the eject button for 10 seconds, until the RT6 restarts.
@mohdd036 ай бұрын
المسجل لا يعمل ما الحل
@stargazer3364 Жыл бұрын
Hi, thanks for posting this video. Some questions if you have the time to answer me. I have a 2013 Peugeot 5008 1.6 I simply turned off the radio when I parked and it never came back on after. The gps turn on but only light gray. The cd makes a whirring noise every 15 seconds or so, as if trying to eject a cd. Been watching other yt videos until I came across yours. Questions... 1. Is a 32 gb sd card better than 16gb..? Another suggested the 32gb evo sd. 2. Should I just insert the sd card blank in the radio, just as it arrives..? 3. Should I order a cd 2.86 or 2.86b or us there a difference..? 4. Does the 2.86 have the Europe maps or do I order another cd for maps. On my radio there is a sticker that has RNEG2 on it. Is this same as RT6..? If you read thus and answer me, I'd really appreciate it. Thunbs-up and subscribed..!
@TomaszPlawski
Жыл бұрын
Most likely the SD although it usually gives some earlier symptoms where the reset with the CD eject helps to get it working again. Some people say that they successfully used a 32gb card, although there is no advantage to the higher capacity. 16gb is enough to hold all of the maps and radar info whilst the original 8gb falls a bit short and at some point will ask you which map set you want removed when loading the new ones. 2.86 vs 2.86b is practically no difference, but instead of ordering you can find the CD image files to burn onto the CD online, as well as a pendrive if you have an USB input. As for the maps, and traffic radar data, those are loaded separately
@@TomaszPlawski - Thank you very much. Do I need to order a cd for maps and radars to load..? If so do you have a link or can you tell me what exactly I need to order..? Sorry if I'm bothersome, I've never done anything like this and frankly it's become a challange I'd love to resolve just so I can pat myself in the back if I'm able to do it. Thank You, again..! Take care..!
@TomaszPlawski
Жыл бұрын
@@stargazer3364 the official (Expensive) maps would be here peugeot.navigation.com/home/en_GB/PeugeotEMEA/EUR a safer bet would be first getting your radio restored, confirming that it's working before ordering anything. Of course there are not entirely legal sources online where you can find the maps for free, but you need a "crack" to get them matched to your VIN or disable DRM in your radio
@stargazer3364
Жыл бұрын
@@TomaszPlawski - Hello Tomasz..! Hope you had a Merry Christmas..! I received the 2.86 firmware cd today and installed it with a new sd card. It updated perfect, the only problem is the language is eother Check or Slovak. I contacted the vendor on ebay and he said I need to go to Peugeot or any garage and do a "telecodage" or telecoding. Not sure what that is as I was trying to avoid going to Peugeot dealership. Still have to get the maps installed but unsure if I should "fix" the language problem first. Whay do you suggest..? Thanks again for your video and all your help. You are a blessing..!
@hypothermie3753 Жыл бұрын
Hi, thanks for the helping video ! I've meet some problem with my RT6 on my DS3 (it was in a loop where it was turning on and off every 3 minutes) so i change the SD card with a new one, as you did in the video. Unfortunately, now the screen stay black (it's lighting up, but it's displaying nothing but black) and the CD lector is turning on and off (like in the video). Do you know how to resolve this state ? I've tried waiting 20 minutes with and without the USB stick that contain the firmware but nothing happened :/
@TomaszPlawski
Жыл бұрын
Does it continue to reset when trying to load the firmware? Could be that the pendrive is corrupt - it needs to be cleaned of all windows added data otherwise the CRC will come out wrong and installation will not proceed, whereas you won’t know that since the screen is blank. As a safer alternative you could try looking for the iso file of the firmware installation CD and burn a disk. An image should be always a 1:1 copy of the original.
@hypothermie3753
Жыл бұрын
@@TomaszPlawski Yes, i think i should try the CD option. As for the pendrive, it was an USB stick provided directly by a DS store, so it should have been fonctionnal (well, the vendor didn't seem to be really sure about what he was giving to me, so, maybe they gave me a corrupted file) and i also try with an USB prepared by myself, and both aren't working. But, thanks à lot for the help you provide !!!
@hypothermie3753
Жыл бұрын
@@TomaszPlawski Finally, it seem's to be the motherboard, i made it test by someone and it wasn't giving any response back, so he replaced it and now it's working
@usstheboss2268
Жыл бұрын
@@hypothermie3753 i have the same problem the radio turn on about 3 minites then off and on again so what was the problem exact so i can fix it And thanks
@hypothermie3753
Жыл бұрын
@@usstheboss2268 Well, the SD card removal didn't worked and the screen stayed black, so i just looked on the internet for someone who could provide a solution against a compensation : i found a guy (i live in France) who tested it, apparently it was due to a dead motherboard, so he changed it, reinstalled all the software and configured everything on the "valise" (I don't know the english name, but it's the citroen computer that permit to check and control most of the parameters of the car). It cost me 300€ but now everything works fine and is up to date and well configurated and it was still less expensive than the entire replacement of the radio by the constructor (at least in france). (Maybe i got scammed, but at some point i was pissed and just wanted to have a working autoradio ^^' ) You should still try the procedure shown in the video before, it's pretty inexpensive and it apparently work in multiple situations (the software of the RT6 can be found on forums, the last version is 2.86 if i'm not mistaken)
@miroslavjevtic6263 Жыл бұрын
Hi mate. I have a same problem, but I live in Australia and Citroen here is like an IT, nobody knows anything about it. Can you please help and direct me to where to get the update? Many thanks, Miroslav
@TomaszPlawski
Жыл бұрын
You can try here www.peugeotforums.com/threads/how-to-update-to-2-86b-on-rt6.213202/
@miroslavjevtic6263
Жыл бұрын
Thanks, Tomas. I have placed update on USB, the screen now comes on & displays "CRC Media checking..." after several minutes "CRC ERROR on media... " & then you can hear buzzing noise, I have left engine running for entire time of the procedure. @@TomaszPlawski
@TomaszPlawski
Жыл бұрын
@@miroslavjevtic6263 unfortunately windows writes it’s “garbage” to the pendrive as soon as you stick it into the USB port, therefore you need to manually remove that so the CRC check of the pendrive comes up ok. Check here frenchcarforum.co.uk/forum/viewtopic.php?t=63227 starting from point 4
@saydur262511 ай бұрын
Hi after updateing the 2.86 firmware the language has changed to Czech please help how can i change it to English
@TomaszPlawski
11 ай бұрын
it seems that you're not the first one to whom it happened, but on www.peugeotforums.com/threads/radio-changed-language-to-czech.355892/ somebody provided a solution: In "user.config.dat": * Unlock language selection: 1.6: Display data Field "1.6.98: Language selection option in setup" value=0 change it to 1 You need "Mirascript" and "DatExplorer" utilities. Extract the "Mirascript" archive on your key and keep only the "RT6_USERCOM.CMD" file from the "CMD" folder. Connect the USB key to the RT6 and answer "YES" to the script execution request. The script will ask to launch the "WRITE" command to which you will answer "NO". The script will then ask to launch the "READ" command to which you will answer "YES". Wait for the script to finish executing before unplugging the US key. On your PC, make a copy of the "User_config.dat" file on the USB key. Extract the archive of "DATEXPLORER". Launch "DATEXPLORER" and click on "Load Config", select the "RT6_2xx-user_config.dat" file. Click on "Load Dat" and select the "User_config.dat" file at the root of your USB key Navigate to the section indicated above and make changes indicated. Click on "Save" and remove the USB key from your computer. Connect the USB key to the RT6 which will ask you to execute the "USERCOM" script, answer "YES". The script will ask to launch the "WRITE" command to which you will answer "YES". Wait for the RT6 to display a message asking to reboot. ESPECIALLY DO NOT ANSWER YES. It will be necessary to press the eject button for 10 seconds, until the RT6 restarts.
@TomaszPlawski
11 ай бұрын
You could also try to download the firmware from some other source (I guess this one was Czech as I can't suspect any other reason why it would default to that language) and try to reload, although I suspect that with the current version already installed it might not rewrite the config files and the language might remain the same - you would need to remove the SD card and delete this manualy.
@saydur2625
11 ай бұрын
How do I change the 'user.config.dat' does dataexplorer automatically change it to English or do I have to change it manually then write it in my rt6 with mirrorscript
@saydur2625
11 ай бұрын
@@TomaszPlawski I bought the firmware direct from UK dealer
@TomaszPlawski
11 ай бұрын
@@saydur2625if everything else works, you should use mirascript to download the user configuration from your radio, then use a text editor to make the modification and then load it back up to the radio. Weird thing though, that the languaged changed for a firmware comming from the dealership. Or maybe that's their way of getting you to come back and pay some extraordinary fee for them to "fix" the problem.
@rodrigoken57727 ай бұрын
Error During SD Partitionning. How to fix it?
@TomaszPlawski
7 ай бұрын
Did you use a 16Gb (max 32Gb) card with FAT format?
@rodrigoken5772
7 ай бұрын
@@TomaszPlawski Tks for your reply. I'm from Brazil my friend! I'm using a 8gb, Fat32 formated, sd card.
@TomaszPlawski
7 ай бұрын
@@rodrigoken5772generally should be ok, although the first thing I would try would be a different card. Best if it was 16Gb, that way you should be able to fit all region maps onto it. Here in Europe if you have only 8Gb at some point when loading maps for more countries the radio asks you which region you want removed to make storage room for the new additional load.
@rodrigoken5772
7 ай бұрын
@@TomaszPlawski I will try another sd card and I come back to tell you if it solved the problem. Can I format normally, Fat32, Allocation Unit Size (default size), no Quick Format, right?
@TomaszPlawski
7 ай бұрын
@@rodrigoken5772 yes, that would be the correct way to format
@mohdd036 ай бұрын
مرحبا ممكن اعرف يش مشلكلة
@user-rm9jd3mt2f11 ай бұрын
من فضلكم ترجمة للفيديو
@AlisonNovaes2 жыл бұрын
where can i download this file to install in the car
@TomaszPlawski
2 жыл бұрын
Got it from the Polish file sharing site chomikuj.pl/meggi55/Nawigacja+Citroen+Peugeot/Software+do+RT6/na+Pendrive don’t know how easy it would be to navigate for foreigners (you need to buy credits to download larger files) however if you google RT6 and 2.86 or 2.86B i recall there were also numerous other sources available. You then need to unpack the archive to the root folder of an empty pendrive but also delete the system folder from CMD window added by windows every time you put the pendrive into the USB port (the radio checks the CRC of the files on the pendrive to make sure it is not corrupted but since there are additional folders/files added by windows it thinks something’s wrong and will consider the pendrive bad) as an option you can search for an ISO image of the installation CD 💿 and burn that onto a CD where the image is a 1:1 of the original
@MegaVranjanac
2 жыл бұрын
@@TomaszPlawski there is script for removing disc info files i found it on frenchcars forum or smth like that, did you go with 2.85b straight? or you upgraded from 2.77 upwards
@TomaszPlawski
2 жыл бұрын
@@MegaVranjanac I did go straight with the newest upgrade, having a new blank SD card installed in the radio, and yes, you need to run the script to clean the pendrive from the windows inf files added by the system, every time you insert a pendrive in your computer. In case of system upgrade the radio checks the CRC of the entire pendrive to see if the data us not corrupt, but since there is something extra now added by windows the CRC does not match and thus the radio will not proceed with the installation. In case of maps etc. the CRC is checked for the individual files, therefore there it doesn't matter if you remove the windows info.
@MegaVranjanac
2 жыл бұрын
@@TomaszPlawski batch file for removing is : @echo off set /p DriveLetter=Enter Drive Letter and ":" to remove System Volume Information Files and Folders. %DriveLetter% attrib -a -r -h -s "System Volume Information" Rmdir "System Volume Information" /q /s pause
@MegaVranjanac
2 жыл бұрын
But what content did u get on new sd card? did u download it somewhere and where or u bought it from dealer
Пікірлер: 136
Nice one.... cheers for showing the procedure.
Bardzo bardzo długo trwa wgrywanie softu. Długo czarny ekran musisz cierpliwie czekać ale gdy już jest pendrive nie powinien wciągać napęd ekran długo czarny
Hello Tomasz. Thank you for the videos it is very helpful. I had a problem with my denon system so i got a replacement( second hand) everything thing works except for the sound. What could be the problem. From Durban South africa.
Hi Tomasz, thanks a lot for the video. Just one question please: you replaced the SD card but also charged/reinstalled the new firmware with an USB or you just replaced the SD card? Thank you very much in advanced!!!
@TomaszPlawski
Ай бұрын
The firmware sits on the SD card, therefore when you replace it with a new card you need to do a full fresh load of the firmware
@ewelina_ka
Ай бұрын
@@TomaszPlawski many thanks for your prompt response!! Milego weekendu
@ewelina_ka
Ай бұрын
@@TomaszPlawski unfortunately it did not work for me 😔 I have tried with 2.85 and 2.86… trying to upload it through usb and CD. In case of CD it is directly extracted after a few seconds/minutes. In case of USB appears a message saying “CRC media checking” and then, after a few minutes “CRC error on media”. Any ideas? Thanks 🙏🏻 in advance
@TomaszPlawski
Ай бұрын
@@ewelina_ka did you burn the cd from an ISO image? As for USB CRC errors these occur most commonly when you load the files but don’t clean the “garbage” windows writes to the pendrive … you need to delete the “system volume information” see below You can Google how to remove this using command prompt. HOWEVER: Once removed if you re-insert the memory stick back into your PC to check its gone, it will automatically put this file back. So once completed do not put it back, if you do go through the process again. You have to be logged on as admin and set up to show hidden files and folders.
@ewelina_ka
Ай бұрын
@@TomaszPlawski hi Tomasz, many thanks again for your support, internet is a better place thanks to people like you 👏🏻 Coming back to the topic, yes I did in the way you explained , however I did not check the garbage files windows adds, maybe this is the problem… In this case I have also seen on internet the original cd firmware for around 20€… Maybe it’s worth to buy it to be sure where the problem comes from. Have a great Sunday!
Hi sir just a few questions im just confused as ive never done this before, 1) i took out the old 8gb sd card should i replace with new blank/empty 16gb sd card or do i need to add files to the new 16gb card? 2) once the sd card is inside and the box is placed back inside the car all screwed back up do i then try the usb? 3)what do i put/install on the usb pen drive to update?
@TomaszPlawski
Жыл бұрын
1. OK, blank card 8 or 16 GB must be FAT format 2. Yes 3. You need to find the firmware online and put it on the USB pendrive or burn a CD from an ISO image and install from that. For the files you can google using phrase RT6 2.86B firmware, for the moment it looks it should be available here www.peugeotforums.com/threads/how-to-update-to-2-86b-on-rt6.213202/ along with some instructions. If you are just copying the files to a pendrive vs. burning a CD from an ISO image you have to remember that windows likes to add it's various "garbage" files/folders which needs to be removed, otherwise the Radio will do an error check and discover the CRC doesn't match ... there are instructions here frenchcarforum.co.uk/forum/viewtopic.php?t=63227 as how to create a .BAT file and how to use it to remove the unwanted files. PS after succesfully running the BAT remove the pendrive - trying to list the pendrive contents in windows can cause it to write these to the pendrive again. When installing you need to be patient as the screen can remain blank for a very long time - if the files on the pendrive happen to be corrupt/CRC is wrong you might not see a message on the screen, but you will here a noise of it trying to eject a CD after which it resets and falls into an endless loop repeating the whole procedure - you will then need to try creating a new pendrive from a different source. 4. and here's where the real fun begins depending on the firmware source it won't necesarily match your car make/configuration. You might see a Peugeot logo instead of Citroen and vice-versa. The steering wheel and panel buttons don't necessary match the relevant functions. Your bluetooth audio might have an echo to it (needs to be matched to the interior "geometry" and audio system you have installed). You might not see the hybrid information screens, or see them (like I do now, even though I have a regular engine) etc. etc. To fix these you need to load the apropriate user configuration file and for this you need to look around eg. you can try here cartechnology.co.uk/showthread.php?tid=51007 for mine I got help on the Portugese Facebook DS5 group although the files wasn't ideal. fixed all the problems but as a bonus I got extra screens showing hybrid batery loading screens etc.
@infernossg3101
Жыл бұрын
Thank you for the reply.For the SD card once I insert into my computer to make sure that it is formatted to fat32 will I have to do the .BAT file to get rid of the "garbage" files that windows adds
@TomaszPlawski
Жыл бұрын
@@infernossg3101 for the SD card it’s not much of a problem as it will be cleared by the radio when you install the new firmware (therefore no need to take out the radio again) however it’s a must for the pendrive you stick in the USB port for the installation
@infernossg3101
Жыл бұрын
I only have 32gb SD card is that fine ?
@TomaszPlawski
Жыл бұрын
If you will be able to format it in FAT32 should be OK, NTFS will not work in the radio. Ps. the pendrive you use also has to be in FAT32, whilst anything larger than 32GB will be NTFS etc. (FAT32 supports only 2GB-32GB media)
I did the same procedure today. Actually, my RT6 radio has an opening for SD csrd access closed with "service sticker"- so no need to unplug the cables at all. I removed the cables and something went wrong- display is black. No radio, no maps, no sensors...
@TomaszPlawski
Жыл бұрын
Is the radio making any noises… especially sounding like trying to eject the CD?
@LansaDiag
Жыл бұрын
Hello, mine does this! What does this mean? :)@@TomaszPlawski
@TomaszPlawski
Жыл бұрын
@@LansaDiag slowly “decaying” SD memory card in the radio, producing more and more read/write errors
@armandsliepa574
11 ай бұрын
@@TomaszPlawski yes, continuously trying to eject CD....
@TomaszPlawski
11 ай бұрын
@@armandsliepa574 ok, so it looks it's falling in the endless reset loop. Need to make sure that the installed fresh SD card is FAT32 formated (!) therefore max 16 or 32GB. Also the pendrive used for the firmware installation should be FAT32 and you need to make sure it ONLY contains the installation files without the windows added garbage/hidden folder, which it writes to the pendrive as soon as you pop it into the USB (this causes a CRC mismatch when checking if the pendrive is not corrupt, and therefore finding the wrong value with the extra files, the radio continues reseting trying to reload). Procedure for creating a batch file to remove the hidden folder described here frenchcarforum.co.uk/forum/viewtopic.php?t=63227
Hi friend I have PEUGEOT 508 after remove RADIO screen black and Disc sound works motor on off
I don't know if I missed it but did u copy what's was on the 8gb sd card into the a 16gb sd card then reassemble? 🤔 what was on the USB plugged into the arm rest . I'm experiencing blank screen nd cd noise but nothing coming or ll keep rebooting when it does....
@TomaszPlawski
2 ай бұрын
Copying didn’t work as the original card was corrupted and has this weird multi-partition. You need to pop in a new memory card in the radio (max 16GB) and then perform the firmware upload from usb stick downloading the firmware from the internet and preparing the usb in a special way, so it doesn’t contain windows added garbage which will screw up the CRC value, which the radio checks
Cześć Tomku mam pytanie ...czy jak wyciągnąłeś radio nie ma tam przypadkiem wyjść RCA pod chinch ???? Albo gniazda do którego można by dokupić przejściówkę ? Chcę założyć wzmacniacz do tego auta a z tego co się orientuję nie wyjść na suba...:( Będę wdzięczny za odpowiedź pozdrawiam serdecznie
@TomaszPlawski
Жыл бұрын
Nie, myśle że trzeba by rozszyć jeden ze zbiorczych wtyków, chociaż rozpiski wyjść nigdzie nie widziałem (aczkolwiek też za bardzo nie szukałem - rozważałem zakup chińskiego radia z Androidem, ale na Ali sprzedają wersje szyte pod konkretne samochodu z kompletem przejściówek „plug and play” to znajomość pinoutu nie jest wtedy zbyt istotna 😏). Nawet jak wyciągniesz audio z kabli to jeszcze mirascriptem trzeba by wybrać odpowiednią konfigurację do pracy ze wzmacniaczem. W opcjach pamietam że były chyba przynajmniej cztery konfiguracje - jedna gdzie radio idzie bezpośrednio na głośniki i 3 do pracy z różnymi wzmacniaczami (pewnie ogranicza poziom sygnałów wyjściowych)
@TomaszPlawski
Жыл бұрын
Z opcji audio w MiraScript jest: "Audio Mode": 0=Normal : internal amplifier () 1=HiFi : external analog amplifier 2=HiFiCAN : external digital amplifier 3=Arkamys : internal amplifier with Arkamys audio DSP 4=Arkamys+Hifi : external analog amplifier with Arkamys audio DSP więc przy klasycznym wzmacniaczu analogowym zdaje się że trzeba by wybrać 1
Witam Tomaszu, takie pytanie techniczne. Czy karta mini SD musi być jakaś konkretna czy tez na przykład taka (SanDisk Ultra 16 GB microSDHC Memory Card A1 App Performance Up to 98 MB/s, Class 10, U1 nie będzie za szybka/za wolan ? I jeszcze czy wkładamy ja czysta sformatowana na FAT32 czy tez próbować przekopiować dane z starej ? Kupiłem z Citroen.navigation najnowsza mapę europy z updatem softemu 2.21A. Czy wystarczy ze zrobię tym update ?
@TomaszPlawski
2 ай бұрын
Czy radio jeszcze cokolwiek “gada”, czy już czarny ekran?
@tomkluz
2 ай бұрын
@@TomaszPlawski czasem się włączy. Szczególnie rano. Na początku reaguje z opóźnieniem na przełączniki i na ekranie nawigacji jest tak jak by polowa mapy, jak by się nie wczytała. Udało mi się wrzucić CD z softem kiedy działało. Długo ja czytał a potem czarny ekran. Później tez miałem momenty kiedy zadziałała ale teraz kiedy jej włożę CD to pisze ze cd unreadable
@tomkluz
2 ай бұрын
Możliwe ze czytnik cd jest walnięty, czy tez cos porąbałem ? Z drugiej strony kiedy działa to działa oczywiście nie wyświetla map ale można radia posłuchać i cos tam poustawiać.
@TomaszPlawski
2 ай бұрын
… nie chciało mi się pisać :) zob. kzread.info/dash/bejne/n6yJ1NquZMW7g84.html
@TomaszPlawski
2 ай бұрын
Przyda się też link github.com/bentalebahmed/Citroen-Peugeot-RT6-car-radio-display-config-via-MiraScripts z opisem robienia backupu konfiguracji radia
Yoo thomasz thanks for your video , i have the same problem .DS5 the screen is black and making the same weird sound same like reject cd sound . What is the best thing to do i visited citroen but they are asking to much 1000 euros HELP ME PLEASE DO YOU HAVE SOME OPTIONS
@TomaszPlawski
Жыл бұрын
Most likely the SD card. Rip out the radio, replace SD, load new firmware… and the most difficult part - if necessary, hunt on Facebook DS5 groups for somebody who can provide the config files for your particular model configuration as these aren’t commonly found online… and without this you most likely will end up with a Peugeot logo and steering wheel buttons not working as expected
@ahmetufukyuksek365
4 ай бұрын
@@TomaszPlawski i updated my dad's car but now the denon audio system doesnt work, how can i fix it
@TomaszPlawski
4 ай бұрын
@@ahmetufukyuksek365 could be the wrong selection of external amplifier type/output setup - this can be changed by misrascript frenchcarforum.co.uk/forum/viewtopic.php?t=61033&start=15 "Audio Mode": 0=Normal : internal amplifier () 1=HiFi : external analog amplifier 2=HiFiCAN : external digital amplifier 3=Arkamys : internal amplifier with Arkamys audio DSP 4=Arkamys+Hifi : external analog amplifier with Arkamys audio DSP
@ahmetufukyuksek365
4 ай бұрын
@@TomaszPlawski can i have your config i effed up by installing wrong config
My Peugeot 508 2012 is having the issue of black screen, but no noise like sucking a cd, or anything. I’ve replaced the memory card, placed the firmaware into the memory stick, plugged into the usd port in the arm rest, ignition on for 25 min … nothing. No signal… no information displayed. I don’t know what else to do. 😢
@TomaszPlawski
8 ай бұрын
I'm afraid can be much longer than half an hour before the initial "upload" completes and anything appears on the screen. Unfortunatelly the eject noise is the only indicator of potential errors on the pendrive which prevents the firmware from loading (when there is a CRC error, the radio reboots and tries to repeat the process) As an alternative you could try downloading a CD ISO image and burn that onto a CD and try to install from that. PS - what size SD card did you put in the radio? Recommended is max 16GB, some reported that 32GB works as well, although either way, it must be formated FAT.
@hycharlison
8 ай бұрын
@@TomaszPlawski I used a 16g, never used. I inserted the memory card in the head unit and assembled all again, plugged the pendrive, which contained the firmware and I erased the windows files, leaving it like you guys recommended.
@TomaszPlawski
8 ай бұрын
Should be OK then, just a bit more time.
@hycharlison
8 ай бұрын
@@TomaszPlawski I will try and tell u here.
Hi Tomasz, I have a Peugeot 308 (2013) 1.6 HDi. My sat nav screen is now permanently black, and my CD player is constantly making an ejecting noise. My mileage has also changed from miles to km. Is this an SD card issue? 😊
@TomaszPlawski
3 ай бұрын
99.9% chance that this is the SD card failure
@jasonjones1436
3 ай бұрын
Brilliant. Am I correct in thinking I will need a 16gb Micro SD card and a 16GB USB stick?
@TomaszPlawski
3 ай бұрын
Yes and yes
Hello Tomasz, do you thing that this could also be the same problem with RT6 ? My radio sometime randomly takes 15 minutes to boot, most of the time it is instant, but other times not, could be SD card issue ?
@TomaszPlawski
11 ай бұрын
Yes. With the card failing it does so gradually, dropping random memory „cells”, sometimes being able to read/write to them, sometimes not, and depending which data is affected, the symptoms can also vary. But probably 99.9% of the cases, when something wrong starts happening with the RT6, it’s the SD card.
@TomaszPlawski
11 ай бұрын
1 thing to remember when installing a fresh SD card and doing the firmare load: card must be MAX 32GB (recommended 16GB) and MUST be formatted FAT32 (not NTFS!)similar thing with the pendrive as the radio might have problems reading different formatting firmware download with instructions amongst others here: www.peugeotforums.com/threads/how-to-update-to-2-86b-on-rt6.213202/ otherwise if that doesn't work you can google for "RT6 2.86B firmware" and download elsewhere when preparing the pendrive you need to remember to remove the garbag files windows will add to it (instructions for preparing and running a .BAT file below) frenchcarforum.co.uk/forum/viewtopic.php?t=63227 You also need LOTS of PATIENCE as the radio screen can remain blank for half an hour or longer during the initial installation, where during the whole time you needto keep the engine running (so the car doesn't go into power-saving mode) and a good ear as you need to listen if there are now CD eject noises ... this happenswhen the radio discovers some errors on the pendrive (eg. if you didn't correctly remove the windows garbage files and thus the CRC is mismatched) and will resettrying to reload and then again and again falling in an endless loop. Normally when you do a firmware upgrade it shows a message that the CRC is bad, but with aninstallation to a blank SD card it doesn't have any software to handle the display and unfortunately the blank screen for the whole time. And that's just the beginning of fun. Once installed the firmware is "bare", not necessarily matching your car configuration (type of audio system, equipment options etc.)although maybe with Peugeot you will have more luck. When I installed in my Citroen the buttons on steering wheel and front pannel were mismatched, the rear cameradidn't show the guidance lines etc. For that you need to load the relevant user configuration files and therefore need to look around on the forums, facebook user groupsetc. for some "magician" who will be able to send you these. I got mine from a Portugese DS5 user group and they are not ideal ... they came from a hybrid engine versiontherefore I now have the radio show the additional screens for like the loading of the hybrid batteries etc. which my car obviously doesn't have. However, fortunatelyeverything else works ok.
Hello, I have a problem with my multimedia Peugeot 3008 (2009-2013) RNEG. Radio and display restarted every 30 minutes. The software is updated to the latest version, but the problem still exists. I tried with a reboot. No changes. Any idea what is wrong?
@TomaszPlawski
Жыл бұрын
most likely the same - SD card dying
Hi Tomasz, How did you Get the sofware at the end for the update?
@TomaszPlawski
9 ай бұрын
The firmware to put on the pendrive? Eg. Here www.peugeotforums.com/threads/how-to-update-to-2-86b-on-rt6.213202/
@kiminho0175
8 ай бұрын
@@TomaszPlawski thanks to your video I manage to get my screen back! Its in Czech now, do you know how to change the language ? I have a Citroen DS3
@TomaszPlawski
8 ай бұрын
@@kiminho0175 I believe it all depends on the firmware image file you got. Mine allows for selection of a few different language versions from the settings menu, but I have heard that with some installs people had that menu hidden and then had it changed by visiting the official shop (where sometimes they also didn't know how or wanted to rake in the cash and were proposing to replace with a new radio). You can try mirascript and dataexplorer as described here www.peugeotforums.com/threads/radio-changed-language-to-czech.355892/ to unlock the language selection screen ... if you figure out the exact steps be sure to post a video about it - there will be many gratefull people as it seems to be a quite common problem ... I would go the "brute force" method and try clearing the card and reinstall firmware from different sourc ... again and again ;)
@TomaszPlawski
8 ай бұрын
@@kiminho0175 ... In "user.config.dat": * Unlock language selection: 1.6: Display data Field "1.6.98: Language selection option in setup" value=0 change it to 1 You need "Mirascript" and "DatExplorer" utilities. Extract the "Mirascript" archive on your key and keep only the "RT6_USERCOM.CMD" file from the "CMD" folder. Connect the USB key to the RT6 and answer "YES" to the script execution request. The script will ask to launch the "WRITE" command to which you will answer "NO". The script will then ask to launch the "READ" command to which you will answer "YES". Wait for the script to finish executing before unplugging the US key. On your PC, make a copy of the "User_config.dat" file on the USB key. Extract the archive of "DATEXPLORER". Launch "DATEXPLORER" and click on "Load Config", select the "RT6_2xx-user_config.dat" file. Click on "Load Dat" and select the "User_config.dat" file at the root of your USB key Navigate to the section indicated above and make changes indicated. Click on "Save" and remove the USB key from your computer. Connect the USB key to the RT6 which will ask you to execute the "USERCOM" script, answer "YES". The script will ask to launch the "WRITE" command to which you will answer "YES". Wait for the RT6 to display a message asking to reboot. ESPECIALLY DO NOT ANSWER YES. It will be necessary to press the eject button for 10 seconds, until the RT6 restarts.
المسجل لا يعمل ما الحل
Hi, thanks for posting this video. Some questions if you have the time to answer me. I have a 2013 Peugeot 5008 1.6 I simply turned off the radio when I parked and it never came back on after. The gps turn on but only light gray. The cd makes a whirring noise every 15 seconds or so, as if trying to eject a cd. Been watching other yt videos until I came across yours. Questions... 1. Is a 32 gb sd card better than 16gb..? Another suggested the 32gb evo sd. 2. Should I just insert the sd card blank in the radio, just as it arrives..? 3. Should I order a cd 2.86 or 2.86b or us there a difference..? 4. Does the 2.86 have the Europe maps or do I order another cd for maps. On my radio there is a sticker that has RNEG2 on it. Is this same as RT6..? If you read thus and answer me, I'd really appreciate it. Thunbs-up and subscribed..!
@TomaszPlawski
Жыл бұрын
Most likely the SD although it usually gives some earlier symptoms where the reset with the CD eject helps to get it working again. Some people say that they successfully used a 32gb card, although there is no advantage to the higher capacity. 16gb is enough to hold all of the maps and radar info whilst the original 8gb falls a bit short and at some point will ask you which map set you want removed when loading the new ones. 2.86 vs 2.86b is practically no difference, but instead of ordering you can find the CD image files to burn onto the CD online, as well as a pendrive if you have an USB input. As for the maps, and traffic radar data, those are loaded separately
@TomaszPlawski
Жыл бұрын
www.peugeotforums.com/threads/how-to-update-to-2-86b-on-rt6.213202/
@stargazer3364
Жыл бұрын
@@TomaszPlawski - Thank you very much. Do I need to order a cd for maps and radars to load..? If so do you have a link or can you tell me what exactly I need to order..? Sorry if I'm bothersome, I've never done anything like this and frankly it's become a challange I'd love to resolve just so I can pat myself in the back if I'm able to do it. Thank You, again..! Take care..!
@TomaszPlawski
Жыл бұрын
@@stargazer3364 the official (Expensive) maps would be here peugeot.navigation.com/home/en_GB/PeugeotEMEA/EUR a safer bet would be first getting your radio restored, confirming that it's working before ordering anything. Of course there are not entirely legal sources online where you can find the maps for free, but you need a "crack" to get them matched to your VIN or disable DRM in your radio
@stargazer3364
Жыл бұрын
@@TomaszPlawski - Hello Tomasz..! Hope you had a Merry Christmas..! I received the 2.86 firmware cd today and installed it with a new sd card. It updated perfect, the only problem is the language is eother Check or Slovak. I contacted the vendor on ebay and he said I need to go to Peugeot or any garage and do a "telecodage" or telecoding. Not sure what that is as I was trying to avoid going to Peugeot dealership. Still have to get the maps installed but unsure if I should "fix" the language problem first. Whay do you suggest..? Thanks again for your video and all your help. You are a blessing..!
Hi, thanks for the helping video ! I've meet some problem with my RT6 on my DS3 (it was in a loop where it was turning on and off every 3 minutes) so i change the SD card with a new one, as you did in the video. Unfortunately, now the screen stay black (it's lighting up, but it's displaying nothing but black) and the CD lector is turning on and off (like in the video). Do you know how to resolve this state ? I've tried waiting 20 minutes with and without the USB stick that contain the firmware but nothing happened :/
@TomaszPlawski
Жыл бұрын
Does it continue to reset when trying to load the firmware? Could be that the pendrive is corrupt - it needs to be cleaned of all windows added data otherwise the CRC will come out wrong and installation will not proceed, whereas you won’t know that since the screen is blank. As a safer alternative you could try looking for the iso file of the firmware installation CD and burn a disk. An image should be always a 1:1 copy of the original.
@hypothermie3753
Жыл бұрын
@@TomaszPlawski Yes, i think i should try the CD option. As for the pendrive, it was an USB stick provided directly by a DS store, so it should have been fonctionnal (well, the vendor didn't seem to be really sure about what he was giving to me, so, maybe they gave me a corrupted file) and i also try with an USB prepared by myself, and both aren't working. But, thanks à lot for the help you provide !!!
@hypothermie3753
Жыл бұрын
@@TomaszPlawski Finally, it seem's to be the motherboard, i made it test by someone and it wasn't giving any response back, so he replaced it and now it's working
@usstheboss2268
Жыл бұрын
@@hypothermie3753 i have the same problem the radio turn on about 3 minites then off and on again so what was the problem exact so i can fix it And thanks
@hypothermie3753
Жыл бұрын
@@usstheboss2268 Well, the SD card removal didn't worked and the screen stayed black, so i just looked on the internet for someone who could provide a solution against a compensation : i found a guy (i live in France) who tested it, apparently it was due to a dead motherboard, so he changed it, reinstalled all the software and configured everything on the "valise" (I don't know the english name, but it's the citroen computer that permit to check and control most of the parameters of the car). It cost me 300€ but now everything works fine and is up to date and well configurated and it was still less expensive than the entire replacement of the radio by the constructor (at least in france). (Maybe i got scammed, but at some point i was pissed and just wanted to have a working autoradio ^^' ) You should still try the procedure shown in the video before, it's pretty inexpensive and it apparently work in multiple situations (the software of the RT6 can be found on forums, the last version is 2.86 if i'm not mistaken)
Hi mate. I have a same problem, but I live in Australia and Citroen here is like an IT, nobody knows anything about it. Can you please help and direct me to where to get the update? Many thanks, Miroslav
@TomaszPlawski
Жыл бұрын
You can try here www.peugeotforums.com/threads/how-to-update-to-2-86b-on-rt6.213202/
@miroslavjevtic6263
Жыл бұрын
Thanks, Tomas. I have placed update on USB, the screen now comes on & displays "CRC Media checking..." after several minutes "CRC ERROR on media... " & then you can hear buzzing noise, I have left engine running for entire time of the procedure. @@TomaszPlawski
@TomaszPlawski
Жыл бұрын
@@miroslavjevtic6263 unfortunately windows writes it’s “garbage” to the pendrive as soon as you stick it into the USB port, therefore you need to manually remove that so the CRC check of the pendrive comes up ok. Check here frenchcarforum.co.uk/forum/viewtopic.php?t=63227 starting from point 4
Hi after updateing the 2.86 firmware the language has changed to Czech please help how can i change it to English
@TomaszPlawski
11 ай бұрын
it seems that you're not the first one to whom it happened, but on www.peugeotforums.com/threads/radio-changed-language-to-czech.355892/ somebody provided a solution: In "user.config.dat": * Unlock language selection: 1.6: Display data Field "1.6.98: Language selection option in setup" value=0 change it to 1 You need "Mirascript" and "DatExplorer" utilities. Extract the "Mirascript" archive on your key and keep only the "RT6_USERCOM.CMD" file from the "CMD" folder. Connect the USB key to the RT6 and answer "YES" to the script execution request. The script will ask to launch the "WRITE" command to which you will answer "NO". The script will then ask to launch the "READ" command to which you will answer "YES". Wait for the script to finish executing before unplugging the US key. On your PC, make a copy of the "User_config.dat" file on the USB key. Extract the archive of "DATEXPLORER". Launch "DATEXPLORER" and click on "Load Config", select the "RT6_2xx-user_config.dat" file. Click on "Load Dat" and select the "User_config.dat" file at the root of your USB key Navigate to the section indicated above and make changes indicated. Click on "Save" and remove the USB key from your computer. Connect the USB key to the RT6 which will ask you to execute the "USERCOM" script, answer "YES". The script will ask to launch the "WRITE" command to which you will answer "YES". Wait for the RT6 to display a message asking to reboot. ESPECIALLY DO NOT ANSWER YES. It will be necessary to press the eject button for 10 seconds, until the RT6 restarts.
@TomaszPlawski
11 ай бұрын
You could also try to download the firmware from some other source (I guess this one was Czech as I can't suspect any other reason why it would default to that language) and try to reload, although I suspect that with the current version already installed it might not rewrite the config files and the language might remain the same - you would need to remove the SD card and delete this manualy.
@saydur2625
11 ай бұрын
How do I change the 'user.config.dat' does dataexplorer automatically change it to English or do I have to change it manually then write it in my rt6 with mirrorscript
@saydur2625
11 ай бұрын
@@TomaszPlawski I bought the firmware direct from UK dealer
@TomaszPlawski
11 ай бұрын
@@saydur2625if everything else works, you should use mirascript to download the user configuration from your radio, then use a text editor to make the modification and then load it back up to the radio. Weird thing though, that the languaged changed for a firmware comming from the dealership. Or maybe that's their way of getting you to come back and pay some extraordinary fee for them to "fix" the problem.
Error During SD Partitionning. How to fix it?
@TomaszPlawski
7 ай бұрын
Did you use a 16Gb (max 32Gb) card with FAT format?
@rodrigoken5772
7 ай бұрын
@@TomaszPlawski Tks for your reply. I'm from Brazil my friend! I'm using a 8gb, Fat32 formated, sd card.
@TomaszPlawski
7 ай бұрын
@@rodrigoken5772generally should be ok, although the first thing I would try would be a different card. Best if it was 16Gb, that way you should be able to fit all region maps onto it. Here in Europe if you have only 8Gb at some point when loading maps for more countries the radio asks you which region you want removed to make storage room for the new additional load.
@rodrigoken5772
7 ай бұрын
@@TomaszPlawski I will try another sd card and I come back to tell you if it solved the problem. Can I format normally, Fat32, Allocation Unit Size (default size), no Quick Format, right?
@TomaszPlawski
7 ай бұрын
@@rodrigoken5772 yes, that would be the correct way to format
مرحبا ممكن اعرف يش مشلكلة
من فضلكم ترجمة للفيديو
where can i download this file to install in the car
@TomaszPlawski
2 жыл бұрын
Got it from the Polish file sharing site chomikuj.pl/meggi55/Nawigacja+Citroen+Peugeot/Software+do+RT6/na+Pendrive don’t know how easy it would be to navigate for foreigners (you need to buy credits to download larger files) however if you google RT6 and 2.86 or 2.86B i recall there were also numerous other sources available. You then need to unpack the archive to the root folder of an empty pendrive but also delete the system folder from CMD window added by windows every time you put the pendrive into the USB port (the radio checks the CRC of the files on the pendrive to make sure it is not corrupted but since there are additional folders/files added by windows it thinks something’s wrong and will consider the pendrive bad) as an option you can search for an ISO image of the installation CD 💿 and burn that onto a CD where the image is a 1:1 of the original
@MegaVranjanac
2 жыл бұрын
@@TomaszPlawski there is script for removing disc info files i found it on frenchcars forum or smth like that, did you go with 2.85b straight? or you upgraded from 2.77 upwards
@TomaszPlawski
2 жыл бұрын
@@MegaVranjanac I did go straight with the newest upgrade, having a new blank SD card installed in the radio, and yes, you need to run the script to clean the pendrive from the windows inf files added by the system, every time you insert a pendrive in your computer. In case of system upgrade the radio checks the CRC of the entire pendrive to see if the data us not corrupt, but since there is something extra now added by windows the CRC does not match and thus the radio will not proceed with the installation. In case of maps etc. the CRC is checked for the individual files, therefore there it doesn't matter if you remove the windows info.
@MegaVranjanac
2 жыл бұрын
@@TomaszPlawski batch file for removing is : @echo off set /p DriveLetter=Enter Drive Letter and ":" to remove System Volume Information Files and Folders. %DriveLetter% attrib -a -r -h -s "System Volume Information" Rmdir "System Volume Information" /q /s pause
@MegaVranjanac
2 жыл бұрын
But what content did u get on new sd card? did u download it somewhere and where or u bought it from dealer