Thanks for watching today's video we hope you enjoyed it and let us know in the comments what you thought of this repair! 😎👍 Subscribe and hit the bell icon to turn on notifications so you don't miss our weekly uploads. 👇 🤳 Follow us online here: Instagram instagram.com/cutting_edge_engineering Facebook facebook.com/cuttingedgeengineeringaustralia/ Official CEE Merch shop: www.ceeshop.com.au

@CrazyBobbyPilot

2 жыл бұрын

Why is the case painted on the inside? 😅

@rickchowsr2532

2 жыл бұрын

Thanks for the education on spray welding. I was always curious on how that works. Fucking Homie…….🤣😂 he wants the whole bag of treats. Homie is awesome

@JohnDoe-bd5sz

2 жыл бұрын

With that professional job, if i were the contractor, i would just put that new part on the shelf, and not bother swapping out this "defective" one. What a masterful piece of work, it will probably last the lifetime of the machine to be honest. Unless someone else does something dumb, like dropping it :)

@JohnnyMotel99

2 жыл бұрын

Ha! I wrote a comment about spray welding some weeks back, thank you for this video!

@rogerwhittle2078

2 жыл бұрын

@@JohnDoe-bd5sz I was thinking exactly the same way, mate! If CEE's patch is holding, why waste time, money and effort to change out the part to no practical benefit? If it was cracking and leaking, fine, have at it, but if it was now covered in dry mud and difficult to find, why bother? Kurtis is way, way good enough.

I've been a welder for 153 years. You did an amazing job

@alfonsoalonzo

Жыл бұрын

ive seen you in a few weird places saying weird things makes me think you where hacked

@anonymousarmadillo6589

Жыл бұрын

@@alfonsoalonzo Or maybe he got whacked in the head

@alfonsoalonzo

Жыл бұрын

@@anonymousarmadillo6589 that would be on brand but its almost like spam bot seriously strange

@sayooj2k379

11 ай бұрын

Bruh

@tbugher62

11 ай бұрын

Wow is your name Moses ?

I love Kurtis' diagnosis: "The machine suffered an extreme case of gravity." Amazing repair.

@madcatter4fude

2 жыл бұрын

Failures in gravity management keeps us repair techs in demand. Respect!

@petemoore5104

2 жыл бұрын

Newtons' first law of gravity was , it sucks, before someone changed it.

@michaelwellman2079

2 жыл бұрын

Lift operator; Hey, It was Not my Fault, it was that "Gravity" guy. lmao Did not know you could even try to repair Cast Iron with any torch. Never even heard of "Flame Spray Welding." Guess I need to get out more.

@johnoliver9885

2 жыл бұрын

Yes quite a nice explanation, reminds me of my first nasty boating experience (broken propellor blades) the mechanic explained to me… “oh yes we get a lot of these type breakages all due to hard water”

@mommieme7

2 жыл бұрын

@@michaelwellman2079 I know right? I have always brazed to do the repairs on cast but day-am that looked beautiful when he was done. Now I want a puddling torch.

40+ years as a welder/fabricator/repairman…I’m ashamed to admit that I’ve NEVER seen this process. You can bet that I’ll be researching like mad! Love your channel mate! Cheers!

@AraCarrano

11 ай бұрын

YT abom79 he has many videos about flame spray buildups on shafting.

@davidelliott5843

8 ай бұрын

Flame metal spray has been used for decades to repair worn shafts or apply hard metal coatings. The trick is to preheat the parent metal. It’s risky as you can damage the underlying hardness.

@davidelliott5843

7 ай бұрын

Flame spray for shaft repairs has been around at least 50 years. I’ve never seen it used for welding. But the (relatively) diffuse heat makes good sense with cast iron.

I've been welding 59 years and have heard of flame spray welding, but have never had the opportunity to see it done. Thank you so much for the concise explanation of the prep work and of course seeing the flame spray welding. Enjoy watching you work. Thank you from Dallas Texas

@leeklemetti1887

4 ай бұрын

Well said. You come here to see some stuff and don't even know that you are learning something new. Great job Curtis.

Being a welder fabricator for the last 39 years, I've got to tell you that was one of the most impressive repairs I've seen. May even be your best video so far. You are pretty damn sharp. Thanks for showing me something I didn't know.

@CuttingEdgeEngineering

2 жыл бұрын

wow thanks mate appreciate you saying so!

@joemehere1151

2 жыл бұрын

Well said. Whole heartedly agree! I don't know that it's the best video because the bar from this channel is so darn high!

@michaelminers2612

2 жыл бұрын

Genius! I did my city guilds back in the 70's and we used to take it in and out of a forge to stop it cracking, but that is waaaay the best I've ever seen ! Thumb's up! Mike in England

@rogerbeck3018

2 жыл бұрын

I am not a welder (better with dead trees) but I really enjoyed this learning, thanks Team CEE

@1nvisible1

2 жыл бұрын

*Brilliant repair. We rarely use our hydraulic press as a sheet metal brake for the big stuff but you made that thing look like a ring roller lol. In Alaska a machine being out for a day might be a $20k loss but even parts that are helicoptered in from the closest FedEx station might take ten days to get here. As for the appearance, I've never met a lady yet who cared what the transmission housing on a Ferrari looked like.*

Having performed many cast iron repairs over the years all I can say is "Wow that puddle gun technique is impressive" and exactly what the Dr ordered for this repair. Great job fitting the plate and the follow thru, you are one mighty talented young-un! Want to bet that the owner / operator will just smile, pay your bill, reinstall the part and run the machine without ever replacing the housing? After collecting the insurance $ that is LOL! BTW as talented as you are you probably consider yourself "the talent" of this channel but I hate to tell ya that the dog and the wife are stealing your thunder! Oh well, "this is the way".

@CuttingEdgeEngineering

2 жыл бұрын

Hey mate, the missus and Homey agree with you 🤣 thanks for watching glad you enjoyed this, i'm thinking the new part would just go on the shelf as a spare 🤣👍

@per365

2 жыл бұрын

@@CuttingEdgeEngineering If it ain't broken don't fix it.

@Rattlerjake1

2 жыл бұрын

@@CuttingEdgeEngineering - I wouldn't have even ordered the part, but would have given you a bonus for a job well done saving me time and money.

@ronblack7870

2 жыл бұрын

i would still put the new housing. with the steel to cast iron you are asking for trouble long term. if it cracks later from vibration and you lose the transmission fluid is the insurance going to buy you a new transmission. i kind of doubt it.

@jameshodgson1609

2 жыл бұрын

I agree, the new replacement part will be still gathering dust on the shelf long after the machine has gone for re-cycling !

I have to say, Curtis, from my perspective, you’re a young guy. But your skill and knowledge equals that of people in the business for much longer. I really enjoy watching these. And I thank your wife for doing such a great job with the shooting and editing of these videos.

@twojack87

8 ай бұрын

I'm not positive but I bet he came up in the business learning from someone that cares as much as he does

The level of tools in your workshop is amazing....and the repairs thereafter are wow!!

@seventhson27

11 ай бұрын

And he still had to drag out the ol' high-tech ANVIL. Not too old, though, because it didn't have a clip-horn,

Sneaking up to the perfect fit is time consuming, but the results are well worth it. Outstanding work. Awesome job.

@CuttingEdgeEngineering

2 жыл бұрын

Cheers mate thanks for watching

This dude is spray welding powder through a torch! How does he have the knowledge, experience, and established business of a seventy-year-old man at whatever age he happens to be? Curtis from cutting-edge engineering never ceases to amaze me!

@CuttingEdgeEngineering

2 жыл бұрын

haha thanks mate I just like to get in and give everything a go, never let textbooks get in my way of learning!

@rodmills4071

2 жыл бұрын

The skill to do comes from doing .😀😁😂🤣😃😎

@AJ-qv5gt

2 жыл бұрын

@@CuttingEdgeEngineering I was introduced to spray welding in my first year as an apprentice, did quite a lot of different repairs with a eutectic Castolin torch, building up shafts, cast iron repairs and hard facing etc.

@allenbrown7820

2 жыл бұрын

Determination and probably some shared knowledge from some old timers along the way.

@whatdoyouthinktodd

2 жыл бұрын

As with all of us our trade gets better as we get older right up to the point where we forget how to do everything except tell the stories that go along with it. Hopefully young ears will sit and listen to our stories and collect some of the knowledge that we've learned over the years...

I know you don't like being on camera but you definitely have a gift for explaining things so the average person understands it. I've never seen any sort of heavy equipment up close but you make it easy to understand what each part does. You truly have a gift.

@BabyMakR

Жыл бұрын

I really think he needs an apprentice. Not necessarily to help, but to teach. And teach right.

@reallnow

Жыл бұрын

How are we supposed to get any work done with all these bloopers! 😂😂

@hayleyxyz

Жыл бұрын

@@BabyMakR he's said before in his Q&A he has no desire to take on one - he just doesn't have the time.

@davidelliott5843

8 ай бұрын

Apprenticeship lasts for years. Initially just a gofer. Over time they take on more skilled work.

If it looks like shit, but works, it ain't shit. Great workmanship and knowledge.

I'm not a welder or fabricator, but i have been around a lot of it in my career. This is the first time I've ever come across powder welding...fascinating!

@CuttingEdgeEngineering

2 жыл бұрын

Well there you go, learning something new every day is what they say!

@SuperSrjones

2 жыл бұрын

I first saw Eutectic at a training event in 1974. We had a play with a range of products, and i was fascinated by it.

@derreckmckenzie5521

2 жыл бұрын

Im a jouneyman welder and never seen this process before .

@diggerman19

2 жыл бұрын

Everyday is a school day 👍

@jimmyb1451

2 жыл бұрын

Same here! Never heard of a puddle gun in my 43 years. It's probably one of those tools, not the kind of thing you need every day, but worth it's weight in gold when you do. I can say, I've had to do quite a few cast iron welds in my time, fixing machinery mostly, and one of those guns would have saved a lot of swearing over the years.

In my opinion I think this is one of the coolest repairs you've done

@CuttingEdgeEngineering

2 жыл бұрын

thanks Jeff appreciate it mate, it's a fun bit of kit to use

@SeanBZA

2 жыл бұрын

@@CuttingEdgeEngineering Yes, never seen that use before. Have done the bronze plate though, to fix up bores that were somewhat less than good, to get them to the point the shafting that ran in them, or at least the new shoulder bolts I used, would be a tight fit. Holes wallowed out, and the original pins were under 5mm diameter at the wear points. No way to get spare parts, seeing as the manufacturer, still in business, no longer supports a machine they made in the 1970's, and have less than a clue, though the parts likely are still on some of the modern versions, seeing as they likely use a similar version of the linkage. But the braze and drill was both faster and cheaper, and the shoulder bolt was $3, off the shelf. Now to get some flexible pneumatic cylinder shaft couplers for it.

That's a pretty cool way of doing it. I've had 966 loaders that guys have busted the housing on just like this and always used 99 nickel rod. Takes forever that way but it works, I'm gonna look more into this. You have imo the best machining channel on you tube btw!

Recently found your channel and subscribed. As an automotive fabricator for nearly 30 years I can appreciate the knowledge and skill you have. You are also a natural when it comes to explaining repair procedures and the video format works great, well done Mrs Camera person/Producer/Editor. P.S I live in Staffordshire, home of the Staffy :)

@CuttingEdgeEngineering

Жыл бұрын

Hey mate welcome to the channel!

@davidelliott5843

8 ай бұрын

Next door to Derbyshire- my home county. We have Rolls Royce. Staffs has JCB.

Welding cast iron, such a nasty job that never turns out good in my limited experience. Was very nice to see you do it, really opened my eyes on what someone who knows a thing or two can do.

@CuttingEdgeEngineering

2 жыл бұрын

cast iron is very temperamental!

@SeanBZA

2 жыл бұрын

@@CuttingEdgeEngineering And that is on a good day.

@aserta

2 жыл бұрын

Don't bother welding cast iron. Only lucky, or experienced people can pull it off, even when perfect tools are involved, and since this method ain't for everyone, learn to braze. Braze and cast iron go together like beer and pretzels. In this instance, for example, brazing a T profile plug, would make the whole area stronger than original (also, same principles apply, you can put a dissimilar metal there, as long as braze can stick to it). Back in the day, when brazing was part of the bread and butter, they used to braze steel strips over cast iron housings (think banding on a barrel) to make them stronger. I've seen housings from old, old Cats break crushers with this mod at the junk yard.

@thenoobplaysit6923

2 жыл бұрын

@@aserta Yeah, I probably would have gone with brazing in this situation. Much less chance of things going wrong and having cracks form later. Still Cutting Edge does good work so I doubt this thing will fail anytime soon.

@fecundloin2780

2 жыл бұрын

Homeless is supervising, all good!

“That will do!” Are you kidding, that was pure brilliance! 👌 Each week I am in total awe at what you are capable of doing, and the fact that you and Karen take so much effort to share this with the KZread community. 👏👏👍😀

@supertramp6011

2 жыл бұрын

I totally agree, and Karen ain’t no fool- she probably makes a decent bit of cash by filming all this stuff for us appreciative viewers. 👌 I really love these vids, nothing is impossible if you believe you can !🏴󠁧󠁢󠁳󠁣󠁴󠁿

I've never heard, let alone seen, powder welding and it is a Fascinating process, along with your explanation as for the reason of it's use on this occasion AND the way your "cameragiggle" records it working, was brilliant. Always a joy to watch the videos and repairs by someone with numerous skills and able to explain the whole thing in a simple way. Wait to see and hear the "outtakes" at the end, always a joy

YOUR BRIEFING ON SPRAY POWDER IS INCREDIBLE TO ENCOURAGE PEOPLE !!!!!!!!!!!!!!!! THANKS !!!!!

I'd never seen spray welding used this way before. Very nice job! And the used-market prices for spray welding equipment just went up 10,000%.

@paulkeys175

2 жыл бұрын

A lost art if not already dead. Usually used for fixing broken things, but in our throw away society, just put a new one on.

@raritica8409

2 жыл бұрын

@@paulkeys175 take er to the dealers

I don’t ever want this channel to end. I could watch this for the rest of my life.

@CuttingEdgeEngineering

2 жыл бұрын

Not planning on stopping anytime soon 😎👊

@nakinajay

2 жыл бұрын

I know right

I just came upon this channel as I am always watching anything that has good-excellent "Maker" content. This channel by far is the most diverse in terms of both types of work that is being done and also the most heavy-duty work being carried out to mend any broken machine in that part of the world. Additionally, he is a very good communicator with detailed explanations of why and how about everything the does and is just a pleasure to watch and learn

Outstanding ! Your complicity with your customer is commandable ! Well done !

The job you did was very good. I never seen sold like this. I solder to in my workshop, but in a diferent way. Congratulations from Portugal 🇵🇹

@CuttingEdgeEngineering

2 жыл бұрын

Cheers mate thanks for watching from over there 😎👍

@AdelinoGambiarras

2 жыл бұрын

Ola amigo tudo bem. Eu nunca tinha visto esse tipo the solda eu gostei ds forma que ele soldou. Gostava de ver a forma que voce solda esse tipo de fetto fundido. Um forte abrscao de Londres Inglaterra 🇬🇧

@fernandoturko

2 жыл бұрын

@@CuttingEdgeEngineering that welding technic is used every day in the factory I work here in Portugal. It is used to repair cast iron molds, it is a glass factory... Love your videos....

The customer is lucky to have you available to attempt such repairs. I'm sure it'll hold up and will definitely offset the cost of the parent machine down time. It doesn't look sh1t at all, for a cast repair, it looks amazing.

Sick.

@CuttingEdgeEngineering

Жыл бұрын

thanks for watching!

That didn’t even look like it was a challenge for you. You made it look like a very straight forward, common repair. Beauty is in the eye of the beholder. To the customer, that repair job looks like $$$.

This is freaking awesome. Never heard of this type of welding. Love that you don’t limit yourself and are willing to do what it takes to help the customer. Great customer service is so hard to find anymore. As always, great videography from the boss.

Great repair. Wished I had known of this method 40 years ago when I repaired my 1948 Willys L-134 block from a freeze crack. Cast is such a pain to fix. Seeing that grader hit the ground would have been a reason to kill or cry on the spot. Great repair job. Nice work as always Karen, and Homeless is still trying to steal the show.

@CuttingEdgeEngineering

2 жыл бұрын

Engine blocks are perfect for this sort of technique 😎👍

@richardprice5978

2 жыл бұрын

@@CuttingEdgeEngineering really hum 🤔so a 1970 BBM/iron hemi needs a new/taller 4140 deck/cam/reinforcements/modifying ( making a costume 1-off isn't in the cards for now plus im experimenting/R&D/working with a cheap boat anker aka polish a 💩to gold ) and id like the raze/fix the D-8 cast iron exhaust ports some and i have a investment cast SS shifter part out of a 2014 tr6060 transmission that needs some small tweaks/mods to work with my application and jb-weld isn't enough/cutting it even as a mockup/test fitment on my transmission bench. so this gas method vs TIG vs stick which is the strongest/perment repair? and im sure pre slowly upto 1500F and after heating slow cooling is needed for both repairs? but i haven't done big cast parts like a block before or cast SS parts but have done small tractor iron junkyard scrap's as practice when i was first learning how to weld 20 ish years ago and for usa 🇺🇸 localities a local welding supply can get the consumables? or call the place in Texas only for spay welding equipment? as i mostly do tig but have done other AWS welding methods like mig or gas rod it just isn't my favourite

@cliveramsbotty6077

2 жыл бұрын

@@richardprice5978 what language are you speaking?

@richardprice5978

2 жыл бұрын

@@cliveramsbotty6077 hah vary funny 😆you have to be trolling for the lol's 😂, that or you didn't see the flag 🇺🇸 or read the hole comment/real question i have

@richardprice5978

2 жыл бұрын

@@CuttingEdgeEngineering to add to the question does this gas spary work better for cast aluminium parts as well vs tig as some cast car parts like older transmission housing's and intake AL manifolds are really dirty/have a lot of junk in them are are hard to weld. and that one i did find out and on one of my per-1990's part's tig worked but look's like crap but my al welding doesn't happen to be the best but it's ok vs my SS steel welding technique's. and is there a replacement method that uses electricity instead of occ's / O2 & asenalene or natural gas?

I've done such repairs more than forty years, never had the equipment or technique to do it anywhere near so well and clean. Thanks!

This was by far the best cast repair I have ever seen done. I've done plenty of cast repairs in my time with tig and stick. For sure going to invest in a flame spray gun after seeing this!

Regardless of what it may be, I will never tire of watching a true artisan apply their trade. With CEE you get it with both barrels, the engineering is first class and the video work is right up there as well.

I'm a certified welder and retired.. I used to do spray transfer welding on heavy parts for United Steel here in the US.. I'm very happy with the videos you are doing.. Keep up the great work you do.. The big boss Homeless should give you and the Mrs. A raise.. have a great weekend..

@CuttingEdgeEngineering

2 жыл бұрын

awesome mate respect to you, hope you're enjoying retirement 😎👍

I've had cause to repair cast iron in the past (stick, brazing, stitching with threaded stock etc but all I can say after watching this is "wow"... I've learned something today. That puddle technique with that gun is nothing short of amazing. Your customer is very lucky. Thank you very much for posting that.

Hi, thanks for the demo on spray welding. As a teenager in the '60s growing up in Texas I had a summer job refurbishing oil well equipment(nasty work) only heard of a guy with a travel unit to do spray welding on worn down drilling shafts. Made good money back then. Your demo is the first time I have seen it done after all these years. Thank you.

You always seem to have a really interesting problem to solve. A lot of thought even before the lot of prep. Awesome skills! And Karen does a super great job of video and editing - big thanks to her too. All brilliantly supervised by Mr. HBB himself, or course.

@CuttingEdgeEngineering

2 жыл бұрын

Thanks mate we both appreciate the great comment!

That was an interesting repair. Job well done and tad nicer than JB Weld :)

@patrickcowan8701

2 жыл бұрын

Do love that jb weld has saved my bacon quite a few times.

That was a great collection of methods to get to a very nice finish. Templates, pressing, hammering and flame spray. Thanks for all the exposition and the demo at the end. Watching your work is an education!

That was absolutely amazing. It looks like brazing with powder basically. Looks like it did the job to me. Great work!

I freaking love problem solving! I excel with problem solving when it comes to carpentry and rehabbing! It's the best feeling knowing you thought up a way to fix a big problem. Awesome job!

What an absolute Pro !! He ran up, found the problem and then Curtis jumped in to fix it. Great camera work as well. What a fantastic team. Keep up the phenomenal content !

@jdmccorful

2 жыл бұрын

Ditto! Enjoyed watching.

That was one of the most interesting repairs i have ever seen on cast your level of knowledge and expertise never cease to amaze so excited to see what else you have for 2023 keep it coming.

Kurtis. I made my living with a torch for many, many years and I loved it. There is a certain personal satisfaction of taking something that's broken and bringing it back to life and useful again. I'm retired now but still miss working with my torch from time to time. Bill from Linglestown, Pennsylvania, USA.

That was an awesome repair you did on that housing. I’ve never seen it used for such a large fill. Well done Kurtis you are a very talented man, and the videography is second to none, great job Karen I love the videos. Peter😀👍🇦🇺

@CuttingEdgeEngineering

2 жыл бұрын

Cheers Peter glad you enjoyed it 😎👍🇦🇺

Thank you for taking the time to explain how the "Puddle Gun" (is this the spelling?) works. Never heard of it before. A very clever principle, like a paint gun that paints with molten metal. Always see other people on KZread getting stuck when it comes to welding cast iron, but for CEE, it was just another day and another job well done. Kudos!

@CuttingEdgeEngineering

2 жыл бұрын

yes puddle gun! it's definitely a great way to do cast iron repairs

Freds Fabrications uk ,love your vids ,been self employed 3 year after kidney cancer ,35 year in industry and just picked up a Fortargen flame spraying kit very similar , i`ve had 90% success on 80 odd jobs but last 2 was a right mare , so will be trying this method , keep up the good work , i did 6 years in a place making loader shovels and telescopic handlers Matbro uk tetbury in the 90`s and was mainly stress relieving , lining all the bosses plate up after welding and overcoming the distortion , all the best fred just watched the vid again and the case and pots looks exactly the same ,megga

I've never seen this application before, it was wonderful seeing you doing it. Hats off to you.

In the early 1980's I worked for STRATA welding. I used to sell a hell of a lot of spray powder gun kits and spray powder, mostly for cast iron repais. I notice that HARRIS also have a great kit. Good to see you still using this type of equipment.

done lots of cast iron repairs never seen this system before.i always found bronze rods and tig welding the best but this looks miles better.

Curtis’ skill and knowledge is astounding - he fixes things that some would say are unfoxable 👍

That's amazing! As always a very educational video! I've never had to fix a hole that big in cast iron.

I just knew that I was going to start seeing cracking everywhere and was amazed when I didn't. That was the best cast iron repair I've seen to date. that's why I tell everyone to watch your videos if there wondering how to fix something right. great job and great Video thanks for sharing

I'm a machinist for a Cat dealer in the USA and spray welding is extremely common as part of out process. We spray weld nearly everything that needs material built back up. Even bearing areas and seal bores will get sprayed and machined back to size.

@stevo450ify

2 жыл бұрын

I wish our dealer here that I work for had it in house. Outsourcing is so sketchy

@raderallen1

2 жыл бұрын

@@stevo450ify being able to do it ourselves is basically a necessity based on how much we do it. Yokes, pistons, brake anchors, duo cones, housings and hubs are the components I specialize in and everyone of them gets sprayed in one way or another to be able to recondition them.

Great job Curtis. I have used the castalin eutectic system about 35 years ago. Works well. I have not seen anyone use it since. Good to see a great procedure still in use.

This is amazing. I'm a student welder / fabricator and have never seen this process before! Will have to ask my instructors about it! Looks really good, fast and effective!

@79huddy

10 ай бұрын

I learned this process for engine casting repair for cylinder blocks and heads used a huge thermal cleaning oven for preheat of huge industrial blocks and heads there is good money in being able to do it

Quality repair. Wouldn't be surprised if that "temp fix" becomes permanent.

I am totally addicted to this channel, which I have been enjoying for a year or so. My late father was a machinist and toolmaker; our shed at home was full of tools that I got to use during my teenage years. Sadly, I never got to run a lathe, but watching Curtis comes very close!

Very impressive work, videos like these are why you are one of my favorite channels on KZread. Hats off to you mate

I like how he tightens his grinding discs. No need for the wrench. That's how I tighten all of mine.

It was very impressive watching you ‘persuade’ that hefty lump of plate to fit such an awkwardly-shaped hole. I thought at first that you would trim the hole to as near a rectangle as you could get, but no, you went the more difficult route! Nice job!

This was all about the right welding technique which you were all over like a cheap suit as a result of your experience. You and Israel at IC Weld are both great problem solvers. Every time I watch your videos I learn something.

@whatdoyouthinktodd

2 жыл бұрын

It's kind of funny I see weld and cutting edge they're 180° apart and I don't mean by the world their personalities but they both can figure out any hard part to fix it hey and they both have a dog we have homeless and we have wylie E.

@gottahurt

2 жыл бұрын

Isaac , his twin brother's not bad either , duh

@rogerdavies6226

2 жыл бұрын

@@gottahurt Isaac is a master at what he does, can you imagine what a team these two would make😀

@markfryer9880

2 жыл бұрын

@@rogerdavies6226 Yeah, not much talking, just a nod at each other and then on with the repair.

Every time I watch this I am more and more impressed. That is such a wide gap. I am definitely going to add a UTP powder gun to my tool set.

Você é um excelente profissional, gosto muito de ver suas técnicas para os reparos!! Deus continue abençoando você e sua família!

This brought to mind a funny case from when I worked in a factory. We had state of the art Kemppi welders that could also weld aluminium. One lad thought he'd have a go. Put all the right settings and went to town. We had a good laugh while waiting to tell him that he forgot to change the stainless steel wire for something more suitable. I learned some new bad words.

@CuttingEdgeEngineering

2 жыл бұрын

he thought he was going to nail that repair 😅

@g60force

2 жыл бұрын

now I'm curious what happens when you tried that... explosions on smaller scale??

@happylittlewarlus

2 жыл бұрын

@@g60force The aluminium just melts away while the steel wire balls on top of it. Makes quite a weird sound.

Brass has always been my go to for cast iron repair... This appears a bit less time consuming and less stress in the repaired joint due to brass pulling inward... Job well done...

@LynxSnowCat

2 жыл бұрын

Do you know if the (wet?) brass powder be reconditioned?

Your knowledge, experience and talent knows no limits. Your craftsmanship is outstanding. I wished your shop was next door to mine. You deserve all the work you get. 5 ⭐️.

1/4 master craftsman, 1/2 artist, 1/2 teacher, 1/2 magician = 1 Wizard! I especially liked the bit at the end. Thanks from Delaware USA! 🇺🇸

Well done !! I first used spray welding in the early 1980s, in the USA. You did an excellent job. I would only suggest 1 thing. In each of the corners I would recommend using a ¾ inch carbide burr for a radius. The same way drilling a hole at the end of a crack relieves stress, so does a radius. The metallurgy of the cast-iron housing was of a high-quality with a high nickel content. Lots of elasticity. 👍👍👍👍👍👍👍👍👍👍👍👍

@CuttingEdgeEngineering

2 жыл бұрын

Thanks for the tips!

Worked for a Cat dealer in late 90's before removing the engine on these motorgraders the shop foreman insisted on personally checking that all the trans/engine flange bolts were removed. Evidently some mechanics in the past were not very careful in removing ALL the bolts and broke an ear off more than once, to which the dealer had to end up paying for a new housing. Your workmanship is second to none!

Just came across this video. Been a welder for decades never seen this process done. Well done incredibly job.

What a fascinating repair process. I never knew this was available. Now to find someone near me for a cast iron repair on my tractor. Great content and a nice discreet explanation of damage….

GOOD GOD! What a way to "carefully" handle valuable equipment! Incredible job, Kurtis! And thank you for the flame spray welding lesson.

Great video. I've been welding for around 50 years off and on. This is the first time I have seen the puddle gun technique being used. That's quite impressive . I worked for a company that used a flame aluminumizing technique, but that was being used as a protective finish and not a structural repair. I would like to see more of this technique being used. Again , great video.

Un travail remarquable d'ingéniosité ! A remarkable work of ingenuity!

I never realized that spray welding was such an elegantly simple process. I love fuel/air torch work. I have a new piece of kit on my wish list. Thanks.

Only 2 KZread fabricators I’ve seen that do this kind of repair, you and abom, it’s a fascinating welding method.

Fascinating job, well done. Your toolbox seems to have infinite capacity with a tool for every job. Great skills.

This one is new to me! I've been a welder/fabricator for 10 plus yrs and never even heard of this one before..!? I thought you meant brazing or something like that when you said you were gonna spray weld it. Nope literally a spray welder!! Good video, I love learning things and watching your videos in the U.S..

Seus trabalhos são incríveis, dedicação total, muito bem equipado com todos os tipos de máquinas e ferramentas.

Wow, this powder gun really deposits some metal. Indeed a real different system from the eutectic I see Abom using sometimes.

Definitely NOT your cut it close and let her rip everyday machine shop! SOO excited I found your channel. You are an ARTISAN in metals. You are so skilled with the work, set up of the lathe and know what to do to get results. I am so impressed and happy to see your videos pop up on my list. Some of the repairs you do well and beautifully make my head hurt looking at the initial damage but when you are done "VIOLA" it looks better than new! Your wife is a jewel (that you already know I am sure) and one heck of a videographer wow what some cool shots. As a photographer of 50+ years her cool use of filters BLOWS me away! WOW! As you can see over here in Mobile, AL in the good ole US of A I am absolutely lovin your videos, your wife's skills in shooting and editing the work. It's like going to class every time but way more fun than school I went to decades ago! Please keep the videos coming you have fans far away and near too I am sure!!!

@CuttingEdgeEngineering

2 жыл бұрын

Hey mate thanks for the great comment and support we both appreciate it a lot! Always glad to read when a viewer is enjoying the videos, we plan to keep making them for a while yet. Cheers

Love watching how things are professionally done and really enjoy the puppy.

I’ve fixed a 250 Hp pump impeller this way!!! Pretty impressive, turn something like that into a functioning part!! Cee crew is awesome!!!

@CuttingEdgeEngineering

2 жыл бұрын

Nice one mate 😎👍

Great Job! I know it´s kind of hard to get information on parts once they leave the shop but still I´d love to see a follow up on how the housing is holding up in every day use. cheers

@CuttingEdgeEngineering

2 жыл бұрын

We will try and get an update!

@AndrewMoizer

2 жыл бұрын

@@CuttingEdgeEngineering I think so many people are looking at your content, and will be for many, many years, that updates on this and any other projects would be really great. You could even do a project updates video with a commentary perhaps? Reading through all the comments here makes it obvious how much you are giving and sharing to the global community. It makes me think of my Dad, who not long before he died lamented that so much knowledge and experience was going to be lost. You are certainly creating a legacy and making the world a better place for many, many people. Thanks for this.

I've seen a few cast iron repairs. That was cool. Messed around with that stuff in engineering school in the early 80s. It's still valid. Thanks for always pushing the envelope. Awesome.

The fitment on the Repair piece was wonderful ! Thanks for sharing your Skills ! And the OUT TAKES are wonderful !

That has got to be one of the most impressive repairs I have ever seen. Hats off to ya!!

What a great video! KZread has shown some interesting techniques to repair cast iron. This one is clearly the best i've seen yet. I love the attention to detail you demonstrated fitting that plate in so well. Another vote that the owner will NOT install the OEM replacement case if this repair shows to a permanent fix after a couple of months of use. The repair looked exceptionally solid and if it didn't crack while cooling down, it should be permanent.

@luviskol

2 жыл бұрын

Not as if the part is going to be highly stressed during use. All it has to do is hold hydraulic fluid and provide somewhere for the pumps to fit. It's just a sump when all is done

I love watching your work. You're an absolute master Kurtis!

Fascinating watching how serious repairs can be made with such precision!

Nicely done, very wise drilling a hole on the end of the crack, definitely helps stop the crack extending.

@rodmills4071

2 жыл бұрын

On the same note.. would there be any gain in having a curve on the corners of the repair rather than a squarish corner... I know it is just a short term repair.. ????🤔🤨😀😁😎nice job.

@dirtfarmer7472

2 жыл бұрын

@@rodmills4071 They’ll use this until the new piece gets delivered, & then continue with this one so that the machine can work, if it works don’t stop. There’s nothing more permanent than a temporary repair.

@outbackladas

2 жыл бұрын

Yes, I agree a curved corner would probably be better. Over the years I’ve done many similar repairs and I’ve found from experience a hole drilled on the end of a crack definitely prevents the crack from extending. In my day we only had brazing or electrodes, this new powder technology is a big improvement.

@outbackladas

2 жыл бұрын

Short term repairs often become long term repairs 😂😜🤪

Absolutely amazing work Kurtis. Well done and I've learned the advantage of using a puddle gun verses a standard spray welding system.

@CuttingEdgeEngineering

2 жыл бұрын

always welcome mate thanks for watching

In all my 50 plus years of welding, I have never seen this method of brazing. Absolutely beautiful job on cast. It doesn't matter the looks as long as it works. Thank you for the enlightenment of a way of welding.

For a young guy, you sure have an enormous wealth of skill and knowledge in your field. Good on ya!.

Never thought this possible you definitely learn something new everyday really impressive repair well done bud

Nice work Kurtis, I'm impressed. I own a Victor spray welding system and never knew they had a version for seam welding. Slickest cast iron repair I've ever seen. Sure beats the high dollar nickel rod that rarely works and only makes your scrap more expensive. Thanks for the demonstration!

@CuttingEdgeEngineering

2 жыл бұрын

no worries mate thanks for watching

@SeanBZA

2 жыл бұрын

Yes, got some of those rods, and about the best use for them is refacing mower blades, as the metal comes out really hard, so takes a lot longer to wear out cutting grass. Last lot though I bought new blades, there was not much left of the old ones.

@AndrewMoizer

2 жыл бұрын

@@SeanBZA great idea! I (think I) got a box of hard facing rods on some big sale and figured I'd never really have any use for them. But building up the mower blade, especially on the Bush Hog would be a good use for them. Thanks.

of course what you do is amazing, but your camera work and video editing is also excellent. Tks for uploading.

I admire how you didn't overdo the grinding. It needs to work for 3 months, its good for the repair to be visible through the paint, more grinding = less strength, just grind enough to make sure nothing gets loose inside the oil reservoir and to get good paint adhesion on the outside = perfect.