Your delivery of explanation is so well put together. Please do more motocross products!! You guys rock.

Very helpful!

Would the street fighter 7/8 handlebars fit on a 2007 kawasaki ninja 650r?

Renthal makes the best bars.

Why did this come up i tried to find something on tokipro handlebars but there was only renthal handlebars that came up

What is better for a crf 230f, Renthal or Protaper?

Just got Renthal Cr high bend for my drz. They don’t look higher. The angle of the wrist looks weird. The pinky is higher than the thumb! I haven’t installed them yet because idk if that’s a good bend for me. Any suggestions? They are fat bars so I have the adapter for them too. Just looks weird with the ends so high.

Hi, witch stronger Renthal 997 twinwall, fatbar or 7/8??Thks

Heya! Trying to raise the height on my FZ07 bars. Looking at Motech risers, but would prefer taller bars as opposed to risers. Not alot of info on stock rise/sweep vs aftermarket offerings. Unsure if Renthal Street High do the trick. Pro Taper? Lil help? Thanks in advance!

@RevZilla

7 жыл бұрын

As much as I wish we had some data to provide, you're right, this information is not really published anywhere. I'd recommend taking a measuring tape to your existing handlebars and mimic the specs that are provided by Renthal and Pro Taper. The Renthal Street High do sound like a good choice but as you mentioned, you'd really want to compare them to your stock set up. Best of luck! -TeamZilla Chris

@green1375

6 жыл бұрын

ReturnToYourBreath did you ever get the street highs?

Hi RZ team! As a reference, what size/rise are the Street Bars used in the video?

@RevZilla

6 жыл бұрын

We didn't record which exact bend type we used unfortunately. -DrewZilla

I'm considering replacing the TC bros drag bar I bought which is way to low on my FZ-07 and also I can feel the vibrations way more than the stock bar. Thinking about getting a low or ultra low but it's difficult to get an idea about how it will look without seeing it in person near or on the bike.

@Osprey1994

7 жыл бұрын

I'm hoping these won't translate vibrations as much and I'm hoping that the low or ultra low will make my shoulders not hurt. but still give me the position that I like that gives me more control.

@Marco-cl9pb

3 жыл бұрын

Hi, did you actually changed do a renthal handlebar? Less vibration?

@hampuspettersson5388

Жыл бұрын

@@Marco-cl9pb handle bars should not have any effect on vibration

Does the twin wall have a 1 1/8 clamp area and for the control 7/8

@RevZilla

6 жыл бұрын

Yes, they're 1 1/8" at the clamping area and 7/8" at the grips. -DrewZilla *www.revzilla.com/motorcycle/renthal-twinwall-handlebars-1-18

2011 yamaha raptor 700 looking for rental bars twill wall 1/8 whats a good bend am not familiar with any on them

@RevZilla

7 жыл бұрын

I believe your stock bar height is 143mm, and all the Renthal Twinwall bars have a shorter height, so you'll have to decide what change you're looking for. -DrewZilla *www.revzilla.com/motorcycle/renthal-twinwall-handlebars-1-18

Can I remove the center bar and ride without it. Does it weaken the bars?

@RevZilla

5 жыл бұрын

Yes and yes. You can remove it, but the bar then has a lot more flex. -DrewZilla

I'm looking to getting some for an ER6f/Ninja 650 my only worry is that I've heard the inner diameter is to small for factory bar ends or aftermarket bar end mirrors, do you know if this is true or if it has been changed?

@RevZilla

5 жыл бұрын

That is correct. For the most part, accessories made for OEM bars and accessories made for aftermarket bars won't work together. OEM bars tend to be threaded for OEM equipment, whereas everything else is hollow. Aftermarket bars can be made of other materials too, most commonly aluminum, which has a different ID. So I would factor in needing new bar ends at least. If you're looking to get bar end mirrors as well, you can just mount them to the bar itself (rather than messing with adapters). That way the end is free for a weight or slider. -Kraus-e

@HalfdeadRider

5 жыл бұрын

Thanks for the reply mate, gives me some options to think about, I never thought of trying to put the mirrors over the bars. I expected to have to use them as a replacement for bar end weights as they come with the fitting attachment with the expanding rubber bushing.

@RevZilla

5 жыл бұрын

You're welcome!

Hey @revzilla I am looking for 0 pullback handlebars for 2013 Honda CB1000R. Can you suggest which one to choose? I want bars which are low and straight. Unable to find it anywhere. Can you please help? Thanks

@RevZilla

4 жыл бұрын

We don't have any completely straight bars, but the most you will get with a tapered 1 1/8" bar is the Rizoma Drag Handlebar. -DrewZilla *www.revzilla.com/motorcycle/rizoma-1-18-drag-handlebars

I think buy twinwall for my yz 250 /08 my question is; I need to buy some accessory to install the handlebar?. PLEASE HELP ME

@RevZilla

6 жыл бұрын

If your stock handlebar is 1 1/8" at the clamping area, then you do not need any accessory besides the proper hand tools. If your stock handlebar is 7/8" at the clamping area, then you would need to get 1 1/8" risers to match the 1 1/8" diameter of the Twinwall bars at the clamping area. -DrewZilla

@98796230966754435677

6 жыл бұрын

Thanks!!!! good boy!!

Why do you always leave out dual sport and adventure bikes

What size in the renthal Street is closest in measurements to the factory far as the 2016 fzo7?

@RevZilla

5 жыл бұрын

The closest should be the Road Low. -DrewZilla *www.revzilla.com/motorcycle/renthal-street-handlebars-78

@Baldsohard365

5 жыл бұрын

@@RevZilla road low?

@RevZilla

5 жыл бұрын

We have it listed just as Low. -DrewZilla

will these fit a moped

@RevZilla

6 жыл бұрын

Probably not. Most mopeds have narrower handlebars or built-in, non adjustable handlebars. -DrewZilla

I have an 05 SV650, The stem doesn't have mounts as the bike comes with clip on's. I'm interested in putting the 7/8's medium or high bend street bars on her and was wondering if anyone could give me some advice on which method to go with or if you would recommend keeping the clip ons? Option 1.) Buy some risers and drill the stem to install them and the bar Option 2.) Buy risers and weld them to the stem

@RevZilla

7 жыл бұрын

If you have clip-ons and your top triple clamp isn't drilled for risers, then your bike is probably an SV650S. The SV650N "Naked" came with risers and an upright handlebar. The cheapest/easiest thing for you to do would be to just buy a used drilled top clamp and risers for an SV650N. Alternately, you could just get riser clip-ons (we sell Woodcraft) or Converti-Bars (which we don't carry). -DrewZilla *www.revzilla.com/motorcycle/woodcraft-riser-clip-ons-with-78-bars

@BullyMoto

7 жыл бұрын

RevZilla Thank you, I'm probably going to go with the pre-drilled clamp or drill the clamp myself.

Ehh not a year but when things go wrong

rental or protaper?

@RevZilla

7 жыл бұрын

Honestly both are good options. It comes down to the shape/bend you're looking for. -DrewZilla

@messiona

7 жыл бұрын

RevZilla i went with the ProTaper Se for my raptor 700 thanks

knurling, grid markings and all the shit related...you get all that in e.g. TRW bars that are nearly half the price cheaper...

If all modern road bikes need holes drilled in the bars…and renthal doesn’t allow drilling. Then these are essentially a waste of time for the road.