Renew the most severely rusted bench chisel in 4 minutes (ON A BUDGET)!!!
Rehab the most impaired vintage chisel in record time using the Taytools Chisel Back Preparation Kit and the Drill Press Sharpening System.
Chisel Back Preparation Kit: rb.gy/0e6ag
Drill Press Sharpening System: taytools.com/products/drill-p...
Drill Press Sharpening System Accessories: rb.gy/202mx
Replacement 3M Cubitron II Stikit Discs: rb.gy/6utoa
Пікірлер: 436
I love the fact that given the title of the video its 18 minutes long 😂
@MikeTaylorToolworks
11 ай бұрын
If it were just 4 min would get complaints that it was too short with no explanation.
@kenwickbutterfield5666
8 ай бұрын
@@MikeTaylorToolworks😂 ❤
@davidbaker6195
7 ай бұрын
I know. Plus, a well maintained chisel doesn't take long to touch up. I think his target audience is the same as the people he said buy a chisel and use it until it becomes a screwdriver can opener.
@MCAS1924
7 ай бұрын
And in the "5 minute repair" the first step takes 24 hours.
@edweber3041
7 ай бұрын
Those of you who timed this do not have enough to do.
Thank you 🙏😊 When you have some skill you don’t need a lot of gear. After getting general sharping knowledge and practice - I’ve sharpened friends dull axe 🪓 when camping 🏕️ last month with just a couple of different rough stones I’ve found on site - and finished it on a stone with a smashed coal from campfire 🔥 (kind of like 1000 grit). It was shining almost like a mirror with few imperfections🪞That was pretty satisfying 😎 Felt like 1000 b.c.
Awesome tutorial! Love those jigs. Jigs equal perfect repetition! Thanks!
Excellent, really brought that chisel back to life in no time at all. Thanks for sharing
Nice video! Great to see a good American made chisel brought back to exacting usefulness. You have a nice shop, an inspiration to see your jigs as well.
beautiful work. the sharpening and chamfering jigs and methods are excellent
Really helpful…both the sharpening AND the bevelling jig. Thanks!
Please use the links below to purchase your kit and accessories! Chisel Back Preparation Kit: rb.gy/0e6ag Drill Press Sharpening System: rb.gy/kclco Drill Press Sharpening System Accessories: rb.gy/202mx Replacement 3M Cubitron II Stikit Discs: rb.gy/6utoa
Thank you for this video.
No wonder your company is known as the best of the best. You provide excellent content, advice and superior tools and jigs. Guys - good on yuh.🤜🤛👊👍👍
@TaylorToolworks
11 ай бұрын
Wow, thanks for the wonderful feedback.
I bought your sharpening kit after seeing it on Stumpy Nubs' channel, had it shipped over to England. It's amazing! My chisels weren't rusty, but definitely needed sharpening. I knocked up 25 and 30 degree jigs while waiting for delivery, so straight to the shed on arrival. I started with some cheap chisels and moved on to my better ones, and it did a fantastic job. I'll keep my Veritas Mk1 for re-honing the second bevel for now, but that may end up on ebay.
what a great tutorial! really simple to understand . thank you please keep them coming
I am so excited about this. I just received my kit from you. I have already made the sharpening jig. Tomorrow I will move to step 2.
Thanks very much for a very good video. I have to admit that I was getting a bit impatient with the length of the introduction but I'm glad I waited until you got to the practicalities...so thanks again!
@MikeTaylorToolworks
11 ай бұрын
Sorry, but just wanted to provide some background. I'm not a YT professional. Thanks for sticking with me to the end.
@ared18t
2 ай бұрын
He wouldn't be able to touch it like that if it got hot enough to damge anything.
Always like to hear mention of Stanley Tools. A grand-uncle of mine by the name of Potter was the company head accountant was their chief accountant. Still have his humble tool box and many of the well used tools he kept in it. Used and abused them all as a kid. Sat in on this channel trying to find the best way of restoring all and passing it on to my grandson so he too can repeat tool abuse & attonement : )
First video I've ever seen on this channel and now Subscribed! Thank you for sharing this content with us!
@MikeTaylorToolworks
11 ай бұрын
Thanks
Terrific! Thank you for sharing! The white vinegar was something I hadn't heard of before! 🙏✌️👍🇬🇧
Nothing better than a scary-sharp tool. Thanks for a great video!
Great and so easy now I can set my chisels which I’ve bee n fighting with for the past few months .Thanks.
Your video is the best on KZread, for the average workshop, where a fella wants to bring the old chisels back to working order without spending a ton of money. The other systems are just way out of reach for most of us.
@susantaylor7152
11 ай бұрын
Thanks!!
@bashed68
6 ай бұрын
Agreed! I have tried various methods over the years to sharpen my chisels (including taking them to a "professional") without success. I could never get them truly sharp. As soon as I saw this video (and system), I thought, "How brilliant!" and ordered a kit immediately. I built the jig from the downloadable plans and as soon as my kit arrived, I was ready to go. I sharpened all of my chisels in short order - probably better than new. That abrasive is really something else.
You made my day with this easy and smart sharpening trick! I was thinking weeks how to sharpen my old chisels and needed also weeks to sharpen them 😕
@TaylorToolworks
9 ай бұрын
Glad I could help!
Good stuff! When I was first buying woodworking tools I picked up a new set of Craftsman chisels. Not great, but good. A few years later they were in need of sharpening. My daughter's father-in-law was a sort of professional handyman/maintenance guy. I don't remember where he worked, but he was the one who showed up when this or that needed fixing. He took my chisels away and brought them back sharp. He hadn't asked, which I wasn't pleased about, but the real problem was that he ground both sides of the bevel. Yes, that nice sharp cutting edge is nowhere near the back surface of the chisel. He didn't understand why I was unhappy, after all they were sharp! They are still around somewhere, but I bought a set of Marple chisels, as I have no way to remove that much steel without getting them too damned hot.
@MikeTaylorToolworks
11 ай бұрын
Someone sent me 88 plane blades that had been dropped by the hardener and all were chipped some as deep as 1/8 inch. I re ground the primary bevel on the lot in an hour and none got hot at all. The cubitron slices through steel and does not generate much heat.
@somebodypeculiar
11 ай бұрын
@@MikeTaylorToolworks Interesting! Of course a chisel has a lot more steel behind the cutting edge than a thin plane blade, but still that opens up some possibilities. Thanks!
I have no other words for this other than _wow..._ well actually I can probably muster a few more. Like "Holy crap!" Suuuuuper impressive 👏👏👏👏👏👏
Yer awsome! I never thought of using my 10" drill press, and vinigar, and all you did! Thankyou 👍
Yeah man. Another great tool development for the community. Thanksñ
Great video, thank you, if blackish stain after soaking in vinegar is an issue hit it with high pressure water, removes immediately, must dry right away to prevent flash rusting, being a member of the pensioner brigade time is of no worry to me, I would round up all local/mates chisels, soak them for at least 24 hrs, (been using vinegar to remove rust for about 200 years 🙂, most satisfying for sure) clean and sharpen chisels on weekend afternoon then invite owners around for BBQ evening. 🙂doesn't get better than that.
@MikeTaylorToolworks
11 ай бұрын
Thanks for the tip.
Nice. I like your business. Interesting tools and good service on the phone. Thanks.
Excellent video. Thank you! I can already see where I'm going to have to get this system set up, including the jigs. :). I'm going to assume you could create a plane blade sharpening jig by using a 30deg. angle on the drill press jig instead of 25. Thank you for showing the vinegar rust remover trick! What a great idea. Just a side note you can also use the vinegar soak on old sink disposers, even if you're on septic. Works a treat to rehab a maybe not well-used disposer. Us folks on septic don't use the disposers much, but they will rust up from time to time. Every so often, it's good to throw some white vinegar down the drain and let it soak a bit, then rinse with warm water. Even makes the disposer smell a bit better.
@TaylorToolworks
11 ай бұрын
Thanks for the kind words. I approach plane blades a bit different. When using the discs for blades 2" and wider the edge produces is out a few thou which can be a problem on a smoother making 1 thou thick shaving. My hack is to grind the primary bevel at 25 degrees and then use a honing guide at 30 degrees on the 400 grit disc on the chisel back flattening plate. This produces a straight edge. I them go to the leather disc and polish. This works great.
Thank you, that's the quickest, most effective, zero bs way of sharpening chisels I've seen.
@MikeTaylorToolworks
11 ай бұрын
Thanks
@andrewclarkehomeimprovement
11 ай бұрын
@@MikeTaylorToolworks have you done a video in a similar vein on sharpening drills? All I have is a drill press and a bench grinder and it's all a bit hit and miss getting a sharp even cutting face. Most of the time, I'm out on site and drill bits do get abused and need some tlc. Thanks 🙂
I am totally blown away by this video. This is precisely why I designed the internet. I am a retired IT professional that spends most of my time now in my garage/shop. I love tools. Not only did you show how to bring an unwanted tool back to life, you showed the world what it is good for. Absolutely amazing and kudos to you. The Universe provides for us and you are the instrument of the learning. Peace!
@jakobvanklinken
7 ай бұрын
"why I designed the Internet" woah there buddy
@paulbateman5769
7 ай бұрын
@jakobvanklinken he is just joking. Everyone knows I designed the internet
@davearonow65
5 ай бұрын
Al Gore designed the internet.
@memphetic
Ай бұрын
@@davearonow65I distinctly recall him saying during the debate vs Bush "I took the initiative in creating the internet"
Beautifully presented, concise and complete. Liked, subscribed and pleased. Thank you. Cheers, D.
Brilliant. Now if I only had a drill press!
Very impresive. Thanks for showing
@TaylorToolworks
11 ай бұрын
No problem
What a great method and it's presentation! Thank You very much!
My only concern is the amount of heat generated when grinding the primary bevel. It looked awfully hot. If the steel gets hot enough to lose its hardness it will still sharpen to an extremely fine cutting edge, but that edge will quickly go dull in use.
@MikeTaylorToolworks
11 ай бұрын
I forgot to mention in the video that the chisel does not get hot when using the cubitron. The cubitron slices through the steel generating almost no heat. I'm able to touch the tip with no fear of removing the temper.
@theboyfat2
11 ай бұрын
I notice that he touches it near the bevel with his bare fingers after grinding which leads me to believe that it is not hot enough to destroy the temper. A chisel placed on the dashboard of a car on a hot day would be much hotter than this. Yet you never see a warning come with a new chisel saying "Caution : Never leave this chisel in an enclosed vehicle on a hot sunny day. It will destroy the temper! " At least that is my take on it for what it is worth.
@RyanJBarnard
11 ай бұрын
This can be overcome by dipping the chisel in water periodically to cool it and oiling after sharpening to prevent rust.
@allenhonaker4107
11 ай бұрын
@@RyanJBarnardor he could dipit in oil
@RetifsGarage
11 ай бұрын
Whaou ! Well done
I'm so happy with this system and it solved lots of problems for me. I no longer need a dedicated area in my small shop to sharpen my tools and don't have to waste so much time and money on all that comes with sharpening to 16000. Sometimes you gotta go down that road before you figure out its just not necessary I suppose. Anyone wanna buy some used shapton glass stones?
@TaylorToolworks
11 ай бұрын
Glad to hear your mimimizing. I no longer use my sharpenign station either. My shaptons are also for sale.
What a great system! And knowing that Stumpy Nubs endorses it, he recently did a video raving about, just confirms what I can see from your video. Excellent job. My goodness there are a lot of whiney (wingey for those of you crying bollocks) commenters out there. I guess it’s easier to complain about a video than make one. Just subbed to your channel. Been buying your products for a while. Love your customer service.
Great video! Thanks for sharing
An 80 on the Bess tester! That's creeping up on actual razor blade territory. Personally, I love the contrast of the highly polished surfaces with the patina from the vinegar bath. & watching those end grain cuts at the end was strangely satisfying.
Impressive. I will be using this system. Thank you.
@MikeTaylorToolworks
11 ай бұрын
Thanks
So satisfying, and no convoluted BS… can’t wait to give all my old dogged up chisels a new lease of life 🙏
Been looking for this type of video for a long while my old tools in my new workshop with some polish on ty.
Excellent, this is a very accessible process, and quick too !
@MikeTaylorToolworks
11 ай бұрын
You'll love it
@MikeTaylorToolworks
11 ай бұрын
Thanks
Brilliant. Such a straightforward method. Thanks for the video.
@TaylorToolworks
9 ай бұрын
Glad it was helpful!
Excellent work,Thanks much.
nice job. very useful. Thanks
I have restored 250 chisels..... this video is very good.
I totally agree that paring end grain is the best and functional way to test sharpness. The hair shaving is kind of stupid.
@MikeTaylorToolworks
11 ай бұрын
Agreed!!
Wonderful presentation
@MikeTaylorToolworks
11 ай бұрын
Thanks
well thought out. Thank you
Nice job, I hadn't thought of it that way. I have many chisels I need to sharpen, Thanks.
@MikeTaylorToolworks
11 ай бұрын
Thanks
Nice method. I might need to switch to this
Ground glass, wet and dry, wire fleece, Trend diamond sharpening jig for both 25 and 30 degree bevels. Permanent marker pen on the bevels to confirm metal is ground true. Works without power tool and avoids having to build jig for sharpening. More expensive overall but repeatable results. Chisel can be honed every now and again depending on what stock you are working on. And works on block plane irons too if working across grain. Trend Mk2 kit under $100.
Like the sharpening BUT love the tip for the end grain!! Never seen that anywhere else. Cheers.
Really nice, I use sandpaper for a while for the rough stuff but the use of the drillpress is eally good stuff. I will try this out myself! Thanks!!!
@TaylorToolworks
9 ай бұрын
Glad to help!
Great video. Thank you ✌🏼️
Very impressive, thanks for the info
Mike, as usual, great videos, enjoy watching all of them in the innovations that you bring to The Woodworking world so well done. Good concept! Would be nice if the sharpening ramp was adjustable! Note: if you use a drill, press a lot, look at investing into a keyless Chuck. You'll love your drill press even more! First upgrade to a drill press everyone should make!
1:06 I'm listening......!
For pitting that still has the rust intact on it you might look into using electrolysis to plate that rust back onto the metal in the place it is in contact with it to minimize and repair the pitting, then do your grinding,. I use a bench sander with a good flat plate and an old belt, wet the belt to keep it cool , have water or mineral spirits handy to keep it cool, switch to a finer belt or even put an arch under the belt for a slight hollow ground which will help in hand sharpening later on. Good job with the sand paper, though.
What a brilliant video, so clear and well edited and your paring jig is very impressive
Deneb Puchalski and Paul Sellers are 2 of my favorite tool sharpeners to watch...
I always sharpen a chisel and I learned how to do that from the Woodright's Shop that used to be on PBS on Saturdays. Also, Flitz brand metal polish will remove a good amount of rust from all iron based metals as well as other metals that can be polished including silver.
@MikeTaylorToolworks
11 ай бұрын
Thanks for the top
Like this easy sharpening tips instead of all the advanced methods whit expensive equipment. As a hobbyist I don't have the space and money to spend 100$ on sharpening stones . Thanks 🙏🍻
Great video and pro tips thanks
I'd imagine most weekend wood workers do not have a drill press either to go with the specialty chisel sharpening gear. They might have a wood planer or jointer though!
Thank you maestro
Great video!!
Great Job 👍
I've been avoiding learning how to fix some old chisels I've had for a while. I guess now I have no excuse any more.
@TaylorToolworks
11 ай бұрын
You literally have no excuse!! 😄
Wow another great video and great tips thanks for sharing
@MikeTaylorToolworks
11 ай бұрын
Thanks
Incredible as always. 😄😄
@MikeTaylorToolworks
11 ай бұрын
Thanks
Thanks, learnt so much from you.
@TaylorToolworks
9 ай бұрын
Glad to hear it!
I also had the idea of using a drill press as a DIY Work Sharp 3000 a few years ago. I concluded that it would be too dangerous to use but this has put my mind at ease! Good work, especially with the jigs :) I'll probably order me one of these if you ship to the UK.
@jimbo2629
11 ай бұрын
Nothing compares with the Worksharp. There is no going back. I’ve tried the drill press system. It works ok, but the Worksharp is so much better especially if you are just touching up an edge.
@MikeTaylorToolworks
11 ай бұрын
Worksharp is great but 4x the cost and the Cubitron discs are much better that the stock Worksharp discs.
@FirstMM
11 ай бұрын
@@MikeTaylorToolworks I can imagine, I have heard nothing but good things about these Cubitron discs. Also, I think the WS3000 is closer to 8x the cost. You can get a lot of Cubitron discs in different grits for that initial outlay!
@chrisengland5523
10 ай бұрын
I too have been searching for this in the UK, but without success. Hopefully, some enterprising retailer will start importing them soon.
Thanks Mike
I guess the five minute challenge didn't actually include the 24 hour bath? Or the time spent pulling out and mounting the wheels? Or the time to add or remove abrasives as they wear out? You be you but I'm sticking with my grinder and stones. Most of my edge tools are restorations. And I love the stones. By the way, I bought a new slow speed grinder some years ago for about $120; the rest of my tools (stones, float glass, etc) I've had for over 40 years. So amortizing the cost of equipment doesn't pencil out to very much. Thanks so much for sharing. Love your videos.
I sharpened my brother in laws chisel. Being a pro he was skeptical. I gave it to him and went indoors for a sheet of paper to show its sharpness. Before i got back he had already nearly cut his thumb off. Said it was the sharpest he has come across in 45 years. Now i just need to learn how to do it quicker
proof is in the performance 😊
Great Job My opinion tho I would dip the chisel in water to maintain the temper if it has one and go on the slowest speed
@MikeTaylorToolworks
11 ай бұрын
The blade never gets hot using the Cubitron. I forgot to show that in the vid.
@TaylorToolworks
11 ай бұрын
I measured the temp with a digal thermometer and the temp at the tip never got above 110 degrees. Need to exceed 600 degrees to remove temper. Thesecret is the Cubitron whick slice through steel and do not generate heat.
This is a great video, and next time I am trying to use the vinegar tip for sure. Just one of your statements in the beginning: "It might take up to thirty minutes or even half an hour". Well, IMHO any woodworker not willing to spend an hour (or two or three) restoring an old chisel is not worth it. Woodworking is not about speed, it is about quality. An old chisel is worth ten times more that most modern chisels and hence worth the time restoring. Having said that, I am a bit worried at sharpening the bevel on the drill press, it looks like the edges are getting hot. While I would follow your method, I also would spend some more time on cleaning the bevel in a slower and cooler way, maybe even thirty minutes. 😄
Thanks great video
@MikeTaylorToolworks
11 ай бұрын
Thanks
Great video! I like the details and complete story. Will be using this method. Where can one get the sharpness tester? Can't find it on Amazon.
@TaylorToolworks
11 ай бұрын
Thanks!!😀
interesting video. Some good ideas going forward.
@MikeTaylorToolworks
11 ай бұрын
Thanks. Give it a try and you'll never turn back.
Very professala from Québec Canada
Excellent demonstration. One thing of note about the drill press. Mine has a morse tapered collet holding the chuck in place, meaning pressure fit, no screws securing it. I once had the chuck drop out using downward pressure. A scary moment. Just a thought.
@MikeTaylorToolworks
11 ай бұрын
All drill presses have a Morse tape fit for the chuck. Just give your chuck a tap with a dead blow hammer and it will never fall out.
Excellent.. thanks for sharing and regards from Deutschland
@MikeTaylorToolworks
11 ай бұрын
Thanks
@TaylorToolworks
11 ай бұрын
Thanks!!
Can you reuse vinegar for rust removal? For instance keep a sealed jar of it and pop something in every so often to clean up? Or is it a one time use thing really? Thanks
Nicely done video! Thank you. You explained everything so well.
@MikeTaylorToolworks
11 ай бұрын
Thanks
I just purchased one of your unhandeld Narex marking knives, and I was wondering if you could tell me what size drill bit is needed to drill holes for the pins? I don't have any bits that small, and I want to make sure that I order the right size the first time around. Thanks.
@StillLivinginthewoods
11 ай бұрын
Got it figured out. I had to pick up a numbered bit set because I had it narrowed down to either a #43 or a #42, and HB had a 60pc set on clearance for less than the two single bits would have cost... it turned out to be #43 Putting it together was fun and didn't take long at all, even after making several mistakes along the way. I may have to buy some of your unhandeld Narex chisels next.
15:45 very important remember!
@TaylorToolworks
11 ай бұрын
Yes
Great tutorial! I would do an extra step for ascetics is after soaking and wiping the metal is mask the handle where the metal meets. Then run a wire brush (on a drill or bench grinder) to brighten the metal, then start sharpening the chisel. Again well made and thanks for putting this video together - now more importantly, I know what “Right” looks like and how it’s supposed to be done.
There goes the temper !!!
I got the very same looking red chisel - inherited it - but I don't have the tools you have,,, However, I knew it was worth saving this old thing, and other tools too...
Brilliant!! Nice set up! and it only took 24 hrs 4 min 13 sec. Why soak it? Won't the grinder just grind off the rust in seconds and take you to bare metal?
Damn ! I am so impressed that this is a 10* vid. But I must also run to the toilet as you literally blew the sh*t out of me with this reclaimed tool that does such a miraculous job ! Not sure whether to bow and hum religious obedience or bow and wave hands and religious obesiance !!! 10* 10* 10*. Totally overwhelmed in that of a-l-l YT vids I have rated (too many) - this actually is a 25*-50*+ rating (screw Michelin's 5* pukey food-fusion rating - I am tougher). I am blessed by just watching this vid !
@MikeTaylorToolworks
11 ай бұрын
Thanks
hi, do you know if this setup can be used to sharpen hand planer blades? or will the width be a problem?
I subscribed!
I liked that. That was interesting. 🤔
Great video, thanks. I'm worried i wouldn't be able to get the drill press table exactly parallel with the disc. Any tips on that?
@TaylorToolworks
11 ай бұрын
You don't need to as you ca shim up the base of the ig with lue tape. Once you get it right you'll never ned to mess with it again.
@fluke747
11 ай бұрын
@@TaylorToolworks I think was saying "you can shim up the base of the jig with blue tape". He showed this in a previous video on the drill press sharpening system.
@ahaurw01
11 ай бұрын
@@TaylorToolworks makes sense, thank you so much
Fabulous sharpening. Look forward to trying it out.
@TaylorToolworks
11 ай бұрын
You'll love. I will never sharper any other way. I need to figure out what to do with all my Shapton and diamond stones.
@fluke747
11 ай бұрын
@@TaylorToolworks Maybe those stones will be for plane blades, etc., or do you have a method for that? Edit: I now see Mike's response above that addresses this. So yeah, I may have some extra Shaptons too :). I think the diamond plates will stay for rounded carving tools, etc.