This is exactly what I was looking for, great video mate! £160.00 I was quoted for work to be done. Now I’ll tackle this job after watching your video. Thanks for uploading to inspire others!

Thank you buddy, exactly the info I needed. I can order the parts now. Cheers

Probably the best video on the change of top mount vivaro

@iknowjack4693

Жыл бұрын

Cheers mate 👍

Great tutorial.. to the point and all the key points I needed to know... Jobs a gooden.👍👍👍

Thankyou for this video, going to do mine this week now thanks to you!

Thanks mate. Id been reading people on the facebook club try and explain but you've really helped me and a lot of people here. May i suggest a gofundme for this kind of video. Id be happy chucking a few quid your way for the time and effort youve put in. And the massive savings for everyone!

Cheers mate exactly what I needed just to see what’s involved top bloke

Thanx for video.....I have got exact same problem in my vivaro , which I can fix now myself.

Thank you for the informative tutorial.

My hero, thanks boss! Made my day.

Brilliant video many thanks 🙏

Brilliant, this is what i needed, now il do it myelf. Thanks.👍

Thanks for the video Jack, doing it this weekend. 👍

Excellent video… my job next weekend!

thankyou for the video, going to do mine this week A+++

top job, thanks, doing mine tomorrow.

Just about to do mine great tutorial!

@iknowjack4693

2 жыл бұрын

How did you get on?

Nice one bro, cheers heaps 🙏

Very helpful. Thanks.

Merci pour votre explication

Don't actually need spring compressors on these, spring isn't under tension when out the van. I'm a vauxhall tech working on these vans day in day out. Excellent work though mate 👍

merci depuis la France

Are you sure you installed the bearing in the correct direction? In the manufacturer's images, it looks like the protruding central part should be facing upwards.

Do you need to get the tracking done after this job? thanks.

Is it worth doing both at the same time? Or just do when they go? I thought I was getting a cracking noise through my cv as recently had to fit a new boot clip,but looking at the start of your video my top mounts look similar to that,drivers side too. Great help this video, thanks 👍

@iknowjack4693

2 жыл бұрын

Cheers, I did both but the drivers side has a factory drain fault, when it rains it runs on to the mount. If you have your tools out for 1 side, why not do both 👍

Super pozdrawiam 👍

Jack, I,ve done this all, and my vans passed MoT, can't find anything wrong with entire suspension, but still makes knocking noise on rough roads, and vibrates through steering, what can this be please? Exactly same as your van, thnx Brian (Dover)

@iknowjack4693

Жыл бұрын

I'm no mechanic, but my wheel bearing did the same? I changed the hub. Other than that I have no idea. Hope you get it sorted

@control5835

Жыл бұрын

@@iknowjack4693 Thanks, it looks like a strut which the sub chassis bit hangs from the main chassis.

Will be attempting soon! I need to get a coil compressor, can you recommend one? Great video, thanks!

@iknowjack4693

2 жыл бұрын

Thanks, I only reccomend NOT buying cheap compressors , they can be dangerous. Good luck with changing yours, it's not very hard

@thepenrice1402

2 жыл бұрын

@@iknowjack4693 thanks. Is £40 cheap? Need to track rod ends at same time, looks easy enough.

@iknowjack4693

2 жыл бұрын

@@thepenrice1402 that sounds a good price. Track rod ends are easy too. 👍

I did mine and there was still a big gap at top? Dont no if the after market strut baring is thinner than origional or what??

@djjphin

2 жыл бұрын

A gap is fine and normal

I have changed the same as video but still have gaps on mounts under the bonnet there not sitting nice , any ideas why please

@iknowjack4693

2 жыл бұрын

I have a small gap on mine too. Not sure why but makes no difference. Maybe ask a specialists and leave an updated post 👍

@iknowjack4693

2 жыл бұрын

After reading the renault forum, there is supposed to be a small gap

@jasondudley6662

2 жыл бұрын

Ok thanks jack appreciate the help

have completed top shock mount due to bearing failure any idea why i have 20mm gap at the top when loaded with wieght seems sock rod is too long will drive ok on test

@TheStressD

Жыл бұрын

Yeah I have the same issue since I changed the top mounts. Have you managed to sort this out? Spoke to Vauxhall and they said all top mounts are the same thinking I had brought the wrong ones or something. Vauxhall said some vans come with different springs, is yours a LWB by any chance?

@georgecroker4911

Жыл бұрын

@@TheStressD no mate SWB the springs are the only thing i have not changed the only other thing i can think of if it has anything to do with the assembly of the strut ie tension on the half nut that holds every thing together

@TheStressD

Жыл бұрын

@@georgecroker4911 Its weird that quite a few people share the same issue, I wonder what it could be. I read somewhere it could be due to a couple of bolts in the subframe but they weren't specific which wasn't exactly helpful.

Was your top rubber washer in the engine bay tight against the body work when you were finished

@iknowjack4693

Жыл бұрын

No there was a small gap.

@mrm22222

Жыл бұрын

Thank you for getting back to me I've just done both all the same as the video even got an old mechanic to have a look but my black top rubbers are over an inch away from the body work and every one on the vivaro groups saying its normal so confusing

@iknowjack4693

Жыл бұрын

@@mrm22222 yeah, that was the response I got when querying the gap. I have had no issues since doing mine. 👍

@mrm22222

Жыл бұрын

I'm sure I'll figure it out eventually thank you for the responds your videos are mega helpful 👍

@TheStressD

Жыл бұрын

​​​​@@mrm22222 have the same issue, the plate that goes in top of the buttresses theres like a 10mm+ gap and it doesn't look right. Did you manage to find out what the issue is?

What are the symptoms of a bad bearing clunking when turning I thought was drop links changed them still clunking drivers side

@iknowjack4693

Жыл бұрын

Exactly that, clanking, it's easy to take out to inspect if not sure

@garyalcorn3831

Жыл бұрын

@@iknowjack4693 thanks will give it a bash

Hello, at 8,23 mins if you zoom into the original bearing it shows the shoulder was facing upright. And then when fitting you have fit it facing down. Whys that? Thanks.

@iknowjack4693

Жыл бұрын

The original bearing was destroyed. Have a look at a pdf drawing. It should show the correct way

@Davidjg23

Жыл бұрын

Ive just changed one today that i had done 4 months ago and i put it the way you and alot of others explain to do it. But i also have a photo of the inner race of the bearing. And the shoulde or stepped side has a thin piece of material to hold the balls into it. But on the flat side of it there is 3mm of material to hold the ball in. And because i fit the bearing stepped side down it collapsed.

@iknowjack4693

Жыл бұрын

@@Davidjg23 dont know why yours collapsed, I did it the way I was told by a mechanic

@Davidjg23

Жыл бұрын

Ah ok. Im just asking as ive changed these 4 months ago and did what i was told by others and it failed. I am a mechanic myself but everydays a school day no matter how long you are at it. Thanks for your replys.

Would you have to breed your brakes after

@298CRE8

Ай бұрын

Only if you remove caliper or loosen banjo on it which you don't need to do unless your a twit so no don't open braking system don't need to bleed etc 🫡

Isle of man