I bought the cheaper injector tool you mentioned. We found that by warming the engine first and then working on getting the injector out, we had much better success with it. If the engine's cold, then the injector's more likely to be stuck. I know you're probably saving yourself a headache by passing on it, but thought I'd add my thoughts because once that injector was replaced, my van was running beautifully.

@garageofdad

Жыл бұрын

Nice one and good to know the other tool works well. Think if I bought the van, it was the thought of doing the gearbox too that swayed the decision really.

@Krafty

Жыл бұрын

@@garageofdad Ahh gotcha, I didn’t even think about the gearbox. Well, I thought it was worth sharing as I know the injectors can put some people off. I believe the cheaper one we bought was around £200 (£90 second hand).

That phase of the renault .a lot of cause is the scuttle panel.water running down windscreen into plastic cover onto head n into injectors.usual problem .

jeeze, after fixing the injector, clutch and gear box they must have made a packet on the nominal retail price of a used renault, thats some big brain business right there 😃

@garageofdad

Жыл бұрын

The chap who eventually bought it (for himself) was a mechanic and sorted everything but it took some amount of work!

Thanks excellent video 👌

Good work right decision live to fight another day

@garageofdad

Жыл бұрын

Some things are best left to the 'real' experts!

@garageofdad

Жыл бұрын

@@mcnairjoiners If you watch the linked video in the description, it's remarkably easy (so long as the screws aren't rusted in!)

@faroukkhan6777

8 ай бұрын

Excellent thanks 👍

Is someone made a van using a traffic body and a transit engine we would all be better off !

Thanks for your videos, I’ve just purchased a trafic 1.9 2010, which ob2 reader would you recommend for a diy mechanic ?

@garageofdad

Жыл бұрын

Any reasonable quality reader will pick up this code. I us an Vgate iCa rpro OBD2 and the free Car Scanner ELM OBD2 app on my iPad

Hallo mein motorgeräusch is der gleiche was muss ich tun? Mein auto ist 3 wochen gestanden und bei erster start war das motor so laut wie am video und keiner findet den fehler bitte um hilfe

@garageofdad

5 ай бұрын

Hello. Try some injector cleaner (Redex or similar) in the fuel tank and take it for a good drive. See if the noise quietens down.

hello, I've been facing the same problem for a few days, Boost circuit pressure error code, the problem is that I cleaned the egr, changed the turbine and vacuum sensors and the van still does the same 🤦 can you help me please

@garageofdad

Жыл бұрын

Hi. Does it run rough or just lacks in power?

@fromabovetheycame8137

Ай бұрын

@@garageofdad sorry to hijack the post , my van which is a 2006 traffic has developed a power loss at low rpm , with the glow plug light coming on intermittent at around 60mph , engine idle is smooth cleaned the egr , maybe the maf sensor , im not sure , ive had the van from new and apart from replacing the starter which was a real pain to change the van has performed great until now.

@garageofdad

Ай бұрын

@@fromabovetheycame8137 Have a look for the rubber pipe as in one of my other videos. However, that would put the 'check injection' light on. Yours sounds like it needs glow plugs which is not too bad a job to do (he says having never done it before!!) Tell tale sign is delayed starting in the morning with a smokey exhaust.

Mine went like this. It was mass air flow

@garageofdad

5 ай бұрын

It's good if it's an easy fix 👍

It could be the con rod bearings

Glow plugs don't make it run rough. They are only used to heat up when it's cold. They don't do anything in normal running. You could have done a simple leakback test on the Injector

@garageofdad

Жыл бұрын

Thanks for comment and tip. The chap who eventually bought it replaced all the injectors, gearbox and clutch and now runs perfect.

@user-jx2ei1kh4q

5 ай бұрын

Dad do you know what you're talking about.. AND NO INJECTOR PULLERS AREN'T THAT MUCH

You don't need take the front end off wtf you doing.. what mark is the trafic mine is mk2 1.9dci

@garageofdad

5 ай бұрын

2.0 DCi doesn't take long to get the front end off for easier access to the EGR valve - I'm no mechanic and don't pretend to be so!!

Do you know what you're actually talking about

So you're doing all that work on a vehicle you're THINKING OF BUYING 😂😂😂😂

@garageofdad

5 ай бұрын

Was my mates vehicle,. Said I'd have a look at it and maybe buy. Wasn't feasible so sold it for him and recouped the money I spent on it.