Renault Megane II Radio Fix/Reboot After Battery Replace or Power Out - Enter Code with no Display!
Автокөліктер мен көлік құралдары
After power failure of some kind or battery change, the Renault Megane II (2005-2008) model's radio
has been known to enter a security mode and stop working completely.
To get it working again, you need to enter the original security code when prompted.
But how to you get to this point if the radio won’t turn on? In this case, the display has also stopped working so we have to do the reset completely blind.
FOLLOW THESE INSTRUCTIONS TO THE LETTER AND IT’LL WORK.
(REMEMBER, YOU’LL NEED YOUR 4-DIGIT RADIO CODE - if you don’t have this, contact your Renault Supplier, quoting the radio serial number - this is on the side of the radio you’ll see it when you pull it out - they have to contact Renault for reset code. Also check your car service booklet documentation in the glovebox. If you’re in luck, the radio code will be quoted in here somewhere.)
(* OR SEE BOTTOM OF THIS TEXT FOR OTHER LINKS TO KZread VIDEOS THAT HELP YOU FIND THE CODE)
1. PUT KEY CARD IN AND START IGNITION
2. PRESS & HOLD 2 AND 5 SIMULTANEOUSLY
3. TURN ON RADIO WHILE DOING THIS (this will put it in test/security mode)
4. RADIO SHOULD BE ON WITH A CONSTANT BEEPING NOISE OVERLAID.
5. THE BEEPING WILL CONTINUE FOR 2 MINUTES APPROX.
6. WHEN IT STOPS, THE RADIO WILL STOP ALSO - BUT IT ISN’ T OFF - IT’S LOOKING FOR THE CODE - BUT YOU CAN’T SEE THIS PROMPT IF THE DISPLAY IS NOT WORKING.
7. SO, AT THIS POINT YOU NEED TO USE THE KEYS 1,2,3 & 4 TO ENTER YOUR RADIO CODE.
8. (LET’S SAY YOUR CODE IS 3456).
PRESS KEY 1, 3 TIMES. (YOUR FIRST NUMBER IS NOW ENTERED).
PRESS KEY 2, ONCE TO MOVE ONTO THE NEXT NUMBER INPUT.
PRESS KEY 2, 4 TIMES. (YOUR SECOND NUMBER IS NOW ENTERED).
PRESS KEY 3, ONCE TO MOVE ONTO THE NEXT NUMBER INPUT.
PRESS KEY 3, 5 TIMES. (YOUR THIRD NUMBER IS NOW ENTERED).
PRESS KEY 4, ONCE TO MOVE ONTO THE NEXT NUMBER INPUT.
PRESS KEY 4, 6 TIMES. (YOUR FOURTH NUMBER IS NOW ENTERED).
PRESS AND HOLD KEY 6 NOW, UNTIL IT MAKES A ‘POSITIVE’ BEEP NOISE.
(IF THE NOISE IT MAKES IS LOW-PITCHED, YOUR NUMBER IS WRONG - TRY PROCESS AGAIN FROM THE TOP).
PRESS AND HOLD KEY 6, 2 MORE TIMES. WAIT EACH TIME FOR THE ‘POSITIVE’ BEEP.
THAT’S IT. YOUR RADIO WILL COME BACK ON AND WILL WORK WITHOUT THE SECURITY BEEPING.
*//((IMPORTANT NOTE: IF THE DIGIT YOU REQUIRE IS '0/ZERO' THEN YOU DON'T NEED TO PRESS ANYTHING OTHER THAN THE 'MOVING ON/NEXT NUMBER' INPUT /// FOR EXAMPLE, WHEN YOU'VE PRESSED 2 TO INDICATE YOU'RE MOVING ON TO THE SECOND DIGIT IN THE CODE, THEN IT IS AUTOMATICALLY ON ZERO/0. JUST PAUSE 1 SECOND THEN MOVE ON TO THE THIRD DIGIT BY PRESSING 3.))//*
IF EVER YOU DISCONNECT YOUR BATTERY IN THE FUTURE, YOU WILL PROBABLY HAVE TO DO THIS AGAIN - SO HANG ON TO YOUR CODE!
THIS IS A DIFFICULT FIX WITHOUT THE DISPLAY TO SEE WHAT YOU’RE DOING, BUT IF YOU’RE SLOW AND SURE WITH YOUR BUTTON PRESSES, YOU SHOULD BE FINE.
IF IT DOESN’T WORK FIRST TIME, TRY AGAIN - YOU MIGHT HAVE MISPRESSED A KEY.
(I HAD TO DO IT MANY TIMES WITH DIFFERENT COMBINATIONS WHILE I FIGURED OUT HOW TO DO THIS).
ANYWAY, HOPE THIS HELPS AND THIS ANNOYING RENAULT MEGANE ISSUE IS RESOLVED FOR YOU. (SAME METHOD APPLIES TO CLIO AND OTHER MODELS OF THIS ERA).
*OTHER REFERENCE POINTS FOR FINDING THE 4-DIGIT CODE:
• Free Renault Radio Cod...
• How to find your Renau...
• Get unlock code for yo...
Пікірлер: 56
Thanks for putting up the video mate. Worked a treat. 2006 scenic. Perfectly understood Davy. 👍👍
Thanks mate. Had a flat battery, with your video, problem solved.
Thank you very much. Works for a Renault Traffic. Muchas gracias. Ha funcionado perfectamente para una furgoneta Renault Traffic sin pantalla.
Wonderfully appreciated thanks
Thank you bro it works man.
Thank you fr this video..Best regards.
Perfect, thanks!
Thanks for this
I got to the stage of pressing 2+5 and power but don't hear any beeping. There is permanent 12v to the radio - and fuse for switched 12v is ok. What could it be?
Your the best
display is not working and radio is not working too in a renault clio 3 (2007) how to fix that?
Thank you very much! Also works for a Renault Clio 1,2 from 2007
How to imput number 8 when it does not exist on radio
I have a renault megane 2, how do I deactivate this, a beep beep is heard in one....
How would I get my code
What is the radio code T262
Ty
Question what would we need to do if the radio was an aftermarket pioneer but we have the same problem. The pioneer has no buttons has its a touch screen any help would be great
@hownowireland
Жыл бұрын
Sorry, can't help you. I only figured it out using the original Renault radio.
Thx❤️❤️
What if beginning with 0751
I just did like the video, the stereo now works but the beeping sound won’t stop,can you please tell me what to do. Thanks in advance
@hownowireland
Жыл бұрын
The beeping sound tells you you're still in security mode. IE. It hasn't worked. Start again is my best suggestion. Make sure you follow the instruction exactly. Cheers
@sonicmalta
Жыл бұрын
Appreciate thanks
@d-lgoe9524
4 ай бұрын
@@hownowireland I have a renault megane 2, how do I deactivate this, a beep beep is heard in one....
@d-lgoe9524
4 ай бұрын
@@hownowirelandhelp my bro 🙄
Salvo muito❤
Pour phase 1 modèl 2004 upaid liste o tuner life ?
@frenchkey
27 күн бұрын
tuner list phase 1, update list phase 2
Hi, I need to remove the battery to get at the fuse box. Will this lead to any faults that may require resets....apart from the radio that is?
@hownowireland
2 жыл бұрын
I'm not a Renault mechanic so can't answer you definitively but in my experience with Renaults, disconnecting the battery cancels out a lot of fault messages. Rather than creating new ones. Except for the radio of course... Cheers
That video is very usefull !! BUT !! My securiti code is 0708 !! How the hell i can enter 0 ??? Like pressing Button Numper 1 9 times ? Or pressig button number 6 4 times ?? Please help me !
@SamDaMan101
Жыл бұрын
You don't press it just leave it on 0 and move to the next number
@geryfsutiii3631
Жыл бұрын
Thank you so much i finally can enjoy my radio ! You are really a life saver mate !!!
I do everything as said and I get the beeps when I press 6 for 3 times but still nothing happens?
@dianedavy
6 ай бұрын
Hi mate, did you get your radio working? I had a lot of faffing about this time, as I forgot the wee silly things and had to watch the video several times as I was missing out steps. Once the beeping stops and I was entering the numbers I put in my code 1702 I pressed button 1 once. Button 2, eight times, button 3, once and button 4, three times, then pressed button 6 and held it till it made a tone sound, released it and repeated this two more times then it worked. The only bit the lad video was missing was the 0 procedure in my code. Hope this helps you. Davy.
@leonardobosanac8984
6 ай бұрын
@@dianedavyWell, after I repeated it 3 times mine also began to work, however the display still won't show the radio stations or anything other then the clock for some reason, not even the outside temperature or anything else. Thanks for the feedback tho, have a good day.
I did just like you said and radio plays for 2 minutes while beeping and then turns off. I try to enter the code but every time I click any button there is this "wrong" beep. Any tips?
@kingbuns11nofriends62
7 ай бұрын
Same as me how do I fix it
@bencebalogh3708
7 ай бұрын
Deleted my prev comment, but I had the same issue. Don't forget that extra button click to select the proper digit. Also it worths to try it multiple times if fails, as the clicks are not recognized maybe and the value is not updated.
Hi there is a constant beep when the radio is on. How do you turn this off? Thanks ☺️
@georgeflorin8279
10 ай бұрын
I have the same problem, radio on still beeping?
@jesusisking5952
10 ай бұрын
@@georgeflorin8279 I got rid of the car heap of poo it was
@abdulelahshakhabi9431
9 ай бұрын
I also still hear the alarm sound from four directions without stopping What did you do to get rid of it?
It’s all on but still bleeping off
@bencebalogh3708
10 ай бұрын
Same here. Did you find any solution?
I don’t know my code
@hownowireland
Жыл бұрын
Hi, at the bottom of the video description there are a few links. One is how to find your code.
How to input 0 2350
@TheNab2323
Жыл бұрын
Did you get it sorted ?
@josepeixoto3384
Жыл бұрын
@@TheNab2323 When you get to button 4, just press it ONLY 1 time to select it, no more. (then do the 6 button to enter--some cars are button 5 go figure..)
Does this work on megane from 2001
Beeping doesn’t stop even after entering the code and submitting it!!!!
@alperenylmaz9585
11 ай бұрын
Nasıl çözdün bip sesini
👍 worked
Konkretny gim