Important tip for all vehicles with this type of spare wheel winch (Renault, Peugeot Citroen...). Always keep the cable under light tension. So the steel cable has no chance to wrap incorrectly due to lack of tension. This simply mean that when unwinding to get your spare wheel. Pull the wheel out from under the vehicle and keep the system with some tension. You'll have to get the wheel out anyway! ;-) When putting it back in place, same thing, engage it to the wheel still away from the car and let the cable pull the assembly into place. BTW this is valid for the use of ANY winch system! With this said, it's one of the best spare wheel access systems ever. You don't have to kneel or get dirty ever. ;-)
@peterscotney12 жыл бұрын
Lot easier than I first thought ! Cheers fella !
@sofianmhmoudi1256 Жыл бұрын
بارك الله فيك.
@derektodd41263 жыл бұрын
Thanks. Would have took me a while to figure out that one.
@brookmillermobility
3 жыл бұрын
No problem!
@user-ey7ee6ko4y6 күн бұрын
비상 공구 위치 이제야 알있네요😅
@mostaitaliaamore5486 Жыл бұрын
Bravo
@boxes2473 жыл бұрын
Thank you🙏
@brookmillermobility
3 жыл бұрын
You’re welcome 😊
@ilhanmehmed2406 Жыл бұрын
Tenks
@hughmoore2 Жыл бұрын
Hi, I had to remove my spare wheel and wind the cable up without spare while getting it repaired? Now it wont wind down, any tips? Probably because there was insufficient tension. Doh!
@RobCLynch
2 ай бұрын
We had the same problem and after loosening everything with a spray of WD40, one of us had to lie on the floor pulling the clamp while the other turned the crank anticlockwise to lift the wheel back up
Пікірлер: 12
Important tip for all vehicles with this type of spare wheel winch (Renault, Peugeot Citroen...). Always keep the cable under light tension. So the steel cable has no chance to wrap incorrectly due to lack of tension. This simply mean that when unwinding to get your spare wheel. Pull the wheel out from under the vehicle and keep the system with some tension. You'll have to get the wheel out anyway! ;-) When putting it back in place, same thing, engage it to the wheel still away from the car and let the cable pull the assembly into place. BTW this is valid for the use of ANY winch system! With this said, it's one of the best spare wheel access systems ever. You don't have to kneel or get dirty ever. ;-)
Lot easier than I first thought ! Cheers fella !
بارك الله فيك.
Thanks. Would have took me a while to figure out that one.
@brookmillermobility
3 жыл бұрын
No problem!
비상 공구 위치 이제야 알있네요😅
Bravo
Thank you🙏
@brookmillermobility
3 жыл бұрын
You’re welcome 😊
Tenks
Hi, I had to remove my spare wheel and wind the cable up without spare while getting it repaired? Now it wont wind down, any tips? Probably because there was insufficient tension. Doh!
@RobCLynch
2 ай бұрын
We had the same problem and after loosening everything with a spray of WD40, one of us had to lie on the floor pulling the clamp while the other turned the crank anticlockwise to lift the wheel back up