Good job mate your video helped 👍

Thanks for the video. I'll be giving this a go next week on a mk 4

really useful, thanks

Thanks for the tip brother i own a mk2 renault megane which in the front train is almost indentical to your clio in terms of components.

@skylined5534

Жыл бұрын

I'll be sharing your pain shortly! My mk2 just failed on both lower ball joints!

Nice job,

Nicely mended matey. Now I know how to replace the ball joints on my Renault Clio Mk3. Can you do a video on how to replace the crankshaft oil seal on an Audi A3? I'm having no end of bother with mine 👍

@menditmatey3368

2 жыл бұрын

I’ll be sure to do a video on that if the opportunity arises. Ken?

The nut that holds the ball joint on I've removed the nut on the RHS but is the another thread because I've noticed you using a socket on the other side of the bolt

@menditmatey3368

Жыл бұрын

It’s not threaded, the bolt can be tight to remove due to rust. Give it a soaking with some penetrating fluid. I used the ratchet to remove the bolt. You could try putting the nut on partially, place a socket on the nut and give it a tap to see if that will help to release it.

Have you to remove anything else besides the wheel to do this job ?

Great DYS. Do you have the reference for the balljoint, please? Thanks for sharing!

@menditmatey3368

Жыл бұрын

Hi, I can’t be certain that this is correct but look up 401604793R to see if it helps. Thanks.

@luisk5582

Жыл бұрын

@@menditmatey3368 I'll take a look on ebay etc. 👍Nothing come as a result. Maybee is missing a number or so...

Good Job bro ! Can u help me ? Do you know the VEMA suspension parts brand? Do you have any advice you can give me?

@menditmatey3368

2 жыл бұрын

That’s not a brand that I’m familiar with. What sort of advice are you looking for? Thanks.

Salut, ma clio a 220000 kms. Cela vaut il le coup de changer les triangles de suspension ? Merci pour ton aide

@samuelgeorge7090

Жыл бұрын

Je pense qu'il ne parle pas français

nice view of your elbow

@skylined5534

Жыл бұрын

Good of you to take the time to make a video and upload it.

Is that a standard vice grip your using? Trying to figure out how to remove the same ball joint

@menditmatey3368

2 жыл бұрын

It was long nose pliers to remove the retaining clip. The other tool to press out and press in the balljoint is a balljoint service tool, you can get them on eBay.

@BobbieBoi2

2 жыл бұрын

@@menditmatey3368 thanks mate appreciate the response

The suspension arm is bent

Just get the driveshaft out of the wheel hub and get yourself some space dude. The correct way is to press the ball joint the opposite way out