Removing the Detroit Diesel from the steel trawler
If you are enjoying this channel, please consider making a donation to www.paypal.me/dangarstu or become a Patreon of Dangar Marine at / dangarmarine
In this video I disconnect the Detroit Diesel 4-71 and lift it out of the boat. This will give me excellent access to the hull below, the prop shaft and the engine itself to service it.
T-shirts and other merchandise available at dangarmarine.com.au/collectio...
Post photos of you wearing your shirt to @dangarstu on Instagram!
Dangar Marine is proudly sponsored by MarineEngine.com. MarineEngine.com supplies a wide variety of spare parts for many brands of outboard motors, be sure to check out their online store.
All music available at soundscloud.com/dangarstu
Пікірлер: 708
I'm only really interested in sailboats, but I accidentally tripped across your videos and now watch them with breakfast. There's something comfy about a dry sarcastic Aussie fixing boats.
I run my own business, but even still I cannot just simply do do whatever I want whenever I want, other people will think I'm being lazy. So today I've hidden in my room, locked the door, and pretended I'm writing letters when In fact I'm watching you take an engine out of a boat........Love it
@DangarMarine
5 жыл бұрын
LOL. Nice bit of covert KZread action. ;)
That Mysterious Canister is almost certainly a Racor fuel seperator being used as a Catch-Can for the AIRBOX DRAIN. 2-Stroke Detroits have Drains coming off the Firedeck/airbox inside the block, to drain off the oil splashed out of the cylinder liner ports. On a Motor Vehicle, they are allowed to just drip down on the ground, except in California. You Check the Fill Level in the Catch-Can every few days, and Drain it into a small can or bottle, and just Pour It Back Into the Engine. Or, if you do Oil Analysis, very EASY to get your Samples...Its' Purpose is to keep oil out of your Bilges. Hey, while you have the engine out, Check the Seals on the Emergency Shut-Off Trapdoor in the top of the Blower, or maybe the air intake box. It looks like a Trapdoor that can fall down over the Blower opening and Shut Off Air from coming in. This is a VERY IMPORTANT Safety Piece on ALL 2-stroke Detroits, its to prevent or stop an Engine Runaway. The seal around the edge of the door MUST be in Good Condition, Air-Tight, for it to Work. Also Check the metal Mating surface, make sure it is Clean and Flat, for a Good Seal. I didn't see it in the vid, check and make sure some Dumb-ass has not Removed it. This is the ONLY WAY to shut down a Runaway Two-Stroke Detroit! If you can't put a Load on the engine big enough to Stall It, the ONLY Other way to shut it down is to Shut Off it's AIR. If it runs away, it WILL Suck the oil out of the oilpan, and Run on THAT til it Blows.
@gregorythomas333
5 жыл бұрын
@Jim I was going to mention this but noticed that you did before I posted...good show mate!
@ionracer24
5 жыл бұрын
What he said...
@JimNichols
5 жыл бұрын
Jim Nickels? Sounds suspicious-but...... EMD same as Detroit and I concur sir... air box drain ...
@jimnickles2347
5 жыл бұрын
Oh, Lord, Not ANOTHER ONE! LOL Well, at least YOU spell your Name Right.....@@JimNichols
@pabstblurobot
5 жыл бұрын
Oh shit now I'm looking up runaway diesel videos. I never thought of not being able to shut one down
"Oh look, it's an Oyster!?" and "I am definitely getting too old for this." 8 minutes in and 2 awesome quotes! Keep up the great work!
@Knarf2285
5 жыл бұрын
"I'll put these somewhere stupid so I make that I lose them."
@TimsWorkshopTJY
5 жыл бұрын
Also putting the round head bolts in a good place to get lost. I hate them too. Only good place to use them is where there is a clearance issues or by wiring/plumbing
@Bob8091
5 жыл бұрын
On a previous one. "Australia rhymes with failure". This is better than many TV programmes.
@adidasmanuk
4 жыл бұрын
Im getting too old for this;) says every mechanic at some stage.plus that 'looked" easier than a car clutch bolt :) but what would i know ;) Im finding the vids fasinating i can see me watching all yours:)
Mad max called he wants his crane back
Stu ,that job has got to be a lot more work than you anticipated!!!! Holy shit!
@DangarMarine
5 жыл бұрын
In some ways, but I also knew it was going to take a bit once I saw it out of the water. Oh well, it will be fun. :)
When I was in the Army I learned a trick to see things that are in tight spaces. We used the camera on our cell phones to take pictures or videos to see things in hard to reach places like your mystery belt.
pulled 2 8v71 out of a 53ft Hatteras. Made rail road tracks to stern. Pulled off with boom truck. 6000 lbs. Nice work Thanks.
@DangarMarine
5 жыл бұрын
The 8v71s certainly are big motors!
I was worried when in your videos I didn't see a beer can anywhere. Jerry got you covered. Beware of one thing turning into another . You have quite a few cans of worms opened now . Doing a fantastic job so far .
@DangarMarine
5 жыл бұрын
It is a tough call knowing when to stop. Everything you touch is 30 years old so could always do with some TLC. I guess keeping an eye on the priority jobs in the only way to avoid spending too much time on the others.
Having worked on many 71 series Detroit's I think you did a pretty good job with it. The fittings on the water inlet are for zinks to protect the engine from corrosion inside. Someone has changed the alternator to a 12 volt one. I would recommend that you go back to a 24 system as it will give you better battery reserves and also do the same with the started as it will start the motor much easier. The external pump that you had a belt just slipping on is probably a wash-down system with that valve that was on there. I would re-do that system as it will help with cleaning the boat and also protect the boat from other issues. The step-down on the intake is not supposed to be there and you need to fix that. The intake silencer with its four bolts should be replaced along with the air screen that was plugged up. The bolt that came out of the exhaust needs to be replaced and a good measure would be to replace all of those studs. The fuel return should be teed and hoses go to each of the tanks to provide better return and reduce the possibility of flooding one tank. Good job overall and smart taking pictures of the electrical and I would mark all wires when I re-installed everything. Almost forgot to suggest that you use a double valve system on all of your raw or sea water systems so that you can remove the system for repair while in the water if necessary. It makes working on the system much easier and allows you to insert things like the sea water filter where you can get at it.
I have no intention of ever owning a boat but I could watch you all day. You should be on TV!!
Your work ethic and diagnostic approach are second to NONE. Excellent work, excellent video production and highly educational narrative. No wonder so many viewers are riveted!
@DangarMarine
5 жыл бұрын
Thanks mate. Glad you liked it. :)
A man with a big heart and the power to tackle anything. Murphy law “if it is going to drop or fall it will to the most difficult place” and it did. Once the engine is out you can get it back....keep it up your doing good. Your also showing the rest of us the hiccups and many of work rounds that are needed to move any job forward. It never goes as the book says....you show the truth.....amacf
@DangarMarine
5 жыл бұрын
Thanks mate! :)
This is the best way to rebuild a boat. Gut it, clean it, fix it and reinstall everything. Thumbs up.
@BornAgainBoating
5 жыл бұрын
It really is, makes things so much better once the project is done
@DangarMarine
5 жыл бұрын
Yeah, it would be impossible to do this properlly with the motor in place.
Of all the boat build/makeover projects on here yours looks like the one that will require the most patients by the time you are done.
@DangarMarine
5 жыл бұрын
One step at a time and it will get there.
Thanks for taking us along Stu. I was getting flashbacks to when I was mechanic watching this vid. Your making great progress
I was amazed when I saw you use the camera to "see"how things were when you took it apart. I use that method on all new projects. The work you are doing on the 4-71 is bringing back some old memories of the 6-71's I once worked on. These engines had over speed trips that shut the engine down if it got out of hand. They were generator sets.
@DangarMarine
4 жыл бұрын
Hey Richard, yep, plenty of these engines were used as generators. Very reliable for that purpose.
That crane looks familiar. Isn't that the one Noah used to load the elephants onto the ark? 😂
@kman-mi7su
5 жыл бұрын
As long as it can still work who cares? Gets the job done apparently,
Finally up to date (just watched everything back to back from your first video).After 45 years at sea on "steel" boats you are doing a sterling job.
@DangarMarine
5 жыл бұрын
Thanks mate. I really feel like I'm in the swing of this job now. I bet you learnt more than a thing or two in those 45 years. :)
Excellent video Stu! I felt for you getting those bolts undone - I have several times told people myself that half of working on engines is putting yourself in uncomfortable positions while undoing intake manifold bolts 1/16th of a turn at a time with coolant dripping on your face. But the reward in the end is addictive!
@DangarMarine
5 жыл бұрын
I'm glad I was above the dripping coolant! :)
I'm not into boats but glad I found this rebuild, seen the last few and they where good. Thanks for the Upload.
That crane was quite the contraption! I’m loving this series. All the best.
@esurcylimaf4335
5 жыл бұрын
Looked like an old Fowler crane.
@robertgebbie5916
5 жыл бұрын
The local nickname for them is a wobbly haha
@Ankan..
5 жыл бұрын
I thought that looked interesting, would actually like to see some more of it! And offcours the video is great As always to, Dangar Marine is my favorite YT channel.👍
Awesome Stu, look forward to the next episode, great progress.
Another great instalment thanks Stu. And the Landy still adding a touch of class on the hardstand....
"Im just going to put these screws someplace stupid so I'll be sure and lose them". Perfect line.
Woohoo! 24 minutes of Dangar Stu goodness!
@BornAgainBoating
5 жыл бұрын
Pretty out of control huh!
All that hard prep work...and it looks like the engine came out easy. That was a good plan! Well done...
@TimsWorkshopTJY
5 жыл бұрын
I wonder what the lines we're that was dragging along with the engine?
I like to watch people work and you add the element of fun. There is a lot you can do to sort out the engine room and improve access.
You are brave, I really admire the patience and the documentation of the whole process
awesome work there, we had a 6-71 Detroit diesel back in the middle 1960's lots of power …
This is adictive. Thanks for taking the time to share!
I have enjoyed your videos for about a month now, you're not afraid to work and have a good set of skills. I like your desire to tackle jobs that you have not done before and learn as you go , best wishes to you and keep up your great work !
@DangarMarine
5 жыл бұрын
Thanks mate, glad you've been enjoying the vids. :)
Great work!!! I like to see every corner of the engine, good plane changes!!!
Good job! Reminds me why I gave up on inboard engines. Working on an outboard is so much easier to get around it.
Trying to jack the bearing out of the housing scared the piss out of me, I knew the boat was gonna lift and when it did, I honestly felt fear that a friend was gonna get hurt. Don't do that yo- we like you being happy, healthy, and .. well, alive.
@DangarMarine
5 жыл бұрын
Sorry for the fright!
Awesome, so many interesting things to work on. Good luck with your repairs!
That was a big job, but now you're really getting to know the boat, and that will pay big rewards in the future. Also, Rob is the man.
@DangarMarine
5 жыл бұрын
He is. :)
enjoying this journey you're on Stu - nice work mate.
Thanks for posting! Even though I will never do this It’s so cool to see how you think about things and brainstorm! I always learn things from your videos!
I can imagine you may feel at times "should I have taken on this project on" but at the end of the day I reckon you've got a great little boat there that I know you'll get a lot a pleasure with.
@DangarMarine
5 жыл бұрын
So far I'm enjoying it. I figure by the time I am over it it will be close enough to feel the end is in sight.
a pack of different coloured insulation tape or zip ties are awesome to keep track of where things go and what connects to what, great stuff Stu.
Keep it up friend stay motivated! This is very intriguing and can't wait for each and every vid to drop
Good video, can't wait to see it all going back together.
Hello from Detroit Stu. Pulling the engine was a good call...gonna make your life a lot easier. She's a little dirty and tired, but she'll be a beast for towing. The hull really has some nice lines, gonna look great when you get her painted. Keep plugging along bud. Thanks for posting
@DangarMarine
5 жыл бұрын
Thanks mate. I'm enjoying the job so far but still looking forward to getting it finished and back in the water.
Super work on your videos.One strategy I use when taking stuff apart like this is to get a big pack of small multiple color zip ties and just tag both sides of whatever I'm taking apart with the same color ties.Pretty durable and they will hold up thru pretty rough service like cleaning or getting moved around.Stay after it man.
Hello Stu, Get some of those little blue, red, yellow coloured cable ties & put one around your cable & matching colour one around the post it came off. One of those cheap telescopic magnetic pick-up tools can come in handy to retrieve bolts & spanners. P.S your making some good progress, I'm enjoying the series.
@DangarMarine
5 жыл бұрын
Yes, a system of matching colours is a great way to go to aid reassembly.
Great bit of progress. Thanks for the video.
I'm enjoying your series. I have a love for all working boats. Yours will be awesome when complete. Tc, Mike
Nice progress ! Really enjoying this series !
@DangarMarine
5 жыл бұрын
Thank mate. :)
Wow this is turning out to be a bigger project than I thought, but that's how boat work goes. Good luck to you
Since you have problems with the through hull valves and there's no strainer plus you're already welding. I'd recommend looking into doing whats called a sea chest. It's basically one through hull that you can hook multiple fittings too. They are much safer, easier to service in or out of the water etc and its cheap to make.
@DangarMarine
5 жыл бұрын
Will do a map of what is there next week and start to hatch a plan.
That engine is so happy you came along lol
@BornAgainBoating
5 жыл бұрын
It hasn't ever seen "true love" until it met Stu!
@MLGVorkScoper
5 жыл бұрын
Len e idk if this is a joke or not, but I sure hope it is
@TimsWorkshopTJY
5 жыл бұрын
I think Stu was trying to get it ready for his friend to pull out
@DangarMarine
5 жыл бұрын
LOL, I hope it is. :)
@michaelmccarthy4615
5 жыл бұрын
That engine will give you many more hours of cruising pleasure...
The Green Machine is going to feel neglected. Another banger of a video.
Ahhhhhh you can’t leave us hanging like that !! Great video sir
Really loving these videos, my son and I enjoy watching, about time you employed a full production team. -My dad
@DangarMarine
5 жыл бұрын
Glad you are enjoying the videos. :)
Thanks again Stu for producing awesome vids
@DangarMarine
5 жыл бұрын
You're welcome mate. :)
I've subscribed to your channel. I love boats and I love good restorations like the one you're doing on your boat.
Thank you for another great video! Watching you work on your boat makes me wish we had warm/nice weather here in Upstate New York (USA) all year so I can work on my current boat restore project. But, due to the frigid cold and snow......guess I'll have to wait a few more months. See ya in the next one.
@DangarMarine
5 жыл бұрын
Yes, we are lucky that even winter is warm enough to work and boat in.
Love this series, keep it up man
A good backup emergency stop is to plumb a co2 fire extinguisher into the inlet manifold in case the emergency shut down flap is corroded and allows air in. We used to fit them to older motors just in case they ran away and started pulling oil past the rings. It’s a bit bush mechanic but there isn’t far to runaway on a 30” boat if the Jimmy has bolted 😎 You can extend the hose easily and operate it from the wheelhouse.
@DangarMarine
4 жыл бұрын
Nice idea!
Very interesting project. Thanks from America!!
Love this boat. Has lots of posibilities. Great video. Subscribed.
The Boats coming along well, look forward to next weeks video. Thumbs up from NY👍👍👍
@DangarMarine
5 жыл бұрын
Thanks mate!
Great site I love every episode.keep them coming.
Man! Good Lord that blower intake was dirty!! Love this series brother, absolutely fascinating!!
@DangarMarine
5 жыл бұрын
Sure could use a cleanout!
This series is fantastic.
Hi Stu greetings from Wasaga Beach Ontario Canada Love your Videos and glad to see you have a bottle of Sailor Jerry's for your down time.
This channel has rapidly become my favourite channel. Great work mate...
@DangarMarine
5 жыл бұрын
Thanks mate, glad you like it. :)
As an ex trawlerman I am really enjoying your progress with this little vessel, I would defo fit deplex fuel filters mate they can save your life in bad weather if you have to do a quick change over, if you don't need a deck wash then just pull that system out, it would give you better access in that tiny engine room. Loving the bottle of rum in the wheelhouse top man, keep up the fantastic work.
@DangarMarine
5 жыл бұрын
Thanks mate. I've been enjoying working on this project. I definitely agree about pulling out everything I don't intend to use when space is at such a premium.
These videos are addicting. Great video 👍🏾
@DangarMarine
5 жыл бұрын
Thanks mate, glad you're enjoying. :)
this work pays off,all sort of problems show them selves and get sorted out
Love it the old spanner down the bilges we have all been there once or twice 🤣 I’m playing catch up on your videos Stu keep up the good work pal 👌🏾
Great to see more🤘🤘oh and 1st 😁.. you really are great at giving step by step info .. only if I could apprentice under you
Great stuff !...look at you go.....You certainly are determined to get it done. Waiting for the next Vid
@DangarMarine
5 жыл бұрын
Feeling like I'm right in the rhythm of it now.
Where you found the shellfish and refer to the cavitation (the engine intake for cooling water), it may be in your interest to install a screen filter w/canister. It will allow to block anything drawn in from traveling further toward the engine.
@DangarMarine
5 жыл бұрын
Yep, definitely going to install a strainer on the water intake.
You might consider installing a keel cooler and dry exhaust/muffler so you can eliminate a raw water pump. One less thing to worry about. Cool little boat you have there.
@DangarMarine
5 жыл бұрын
Yeah, I'm, kinda wishing it hadn't been converted. The wet exhaust takes up most of the room on that port side.
Great points about documenting where things go before disassembly. 👍 Haven't found an oyster in my motor before. I was hoping a pearl would roll out for you. 😊 We have a monstrous forklift here at my job that was beautiful when it plucked my sterndrive V8 motor/trans out of my cruiser...twice. Heavy lifting equipment with a healthy motor and hydraulics with good seals is a beautiful thing indeed.
Excellent progress Stu
canister def a racor, and that dodgy water pump running to a manifold is most likey a mechanical bilge system.. love this channel!!!!!!!!!
I don't know anything about boats, but before getting rid of that necked-down water pipe, you might want to see what size hoses are readily available. I used to run into this working on IH gas engines - they used huge radiator hoses that didn't cross-reference with any other manufacturer. A decade after they stopped making those engines, getting a simple radiator hose meant a 3-week waiting period.
@DangarMarine
5 жыл бұрын
Good point about parts. I'd hate to find out at the last minute given its $200 a week to be on site.
I have to catch up 4 years of videos lol I haven’t been watching mate. Unfortunately I’ve had so many different hobbies since then and lost interest in boats and jetski’s etc..... I recently got back into the hobby and bought a jetski. I’m now in the market for a good used cheap reliable boat!! Watching your videos again is brining back all the passion for this beautiful hobby!! Good to see your still going strong. Hope to see ya on the water mate, I’ll throw ya some beers 😂👌
I love that crane. That looks like it would be great for setting concrete blocks.
I enjoy your video's, keep up the good work mate
Your a very patient OZ,hope it will be worthwhile on completion good luck
Amazing that so many of the engine's serviceable parts couldn't be reached without dismantling almost everything. Hope you got the ziplocs!
As cramped as that engine closet is, I'd give some serious consideration to cutting a larger opening around your existing box. Weld a strip around it, drill holes every 2 to 3 inches, make a gasket and bolt it down. You'll be able to use the existing opening for normal maintenance but, if you have to get to something further down, you can unbolt the whole assembly to gain access without pulling the engine.
@DangarMarine
5 жыл бұрын
Yes, I would like to have better access to the port side should there be an emergency of any sort.
One of the best time savers for a job like that is about 6-8” of telephone cable which has thousand of different color bundles then you start with white on terminal and white on wire then blue and blue and so on and so on Great to keep in the tool box Find someone who works for the phone co and get a foot of it cut it in half youll be set for a life time
@andyd1006
5 жыл бұрын
We use that where I work. For marking hoses and wiring on heavy equipment. Works great.
@DangarMarine
5 жыл бұрын
Nice tip!
this is addictive viewing, great to watch,ty
Loving this project Stu
Sailor Jerry's on the helm!! Yeehaw! My favorite!
@DangarMarine
5 жыл бұрын
Mine too!
3:25 - cables are “a bit how ya goin”; which Urban Dictionary says is Australian for being questionable. Learnt something new today. Tks Stu.
@DangarMarine
5 жыл бұрын
I try to make an educational channel. ;)
great work, I see Sailor Jerry there helping out
Awesome progress Stu! It sounded like it was raining for parts of the video? Thats dedication! Great job keep up the great work and thank you for sharing so much of the process :)
@DangarMarine
5 жыл бұрын
Yeah, was a bit of a rainy day. Oh well, next week is supposed to be better weather. :)
Good work on getting the engine out! Those cable tie mounts one trick i do with any boats / cars / switchboards i use them on is to cut the sticky backing pad off the back and araldite them it works amazing and stay there forever u just need to tape them in place until araldite sets. I would almost be tempted to rewire using tinned wire could even use numbered control wire and build yourself a wiring schedule to keep on board. Awesome work mate wish i had of seen your channel before i pulled my 90s model 225evinrude off my boat and rebuild the whole boat im sure i could have got it started for a few fishing trips!
@DangarMarine
5 жыл бұрын
Yep, think I will be re-doing a lot of the wiring. I'll also be making a manual that maps it all out so I don't forget in the future.
When you put that Detroit donk back onboard my tip is to only use Murphy gauges to monitor and control.They represent true reliability and simplicity, also reasonable on cost.
@DangarMarine
5 жыл бұрын
I'll check them out.
Love it.......your a mechanical genius and I enjoy this video.😀
You have the patience of a saint Stu😁👍
@mrwideboy
5 жыл бұрын
Yep , would be swearing all the time
“It’s a chippies hammer” Hi Stu, Another fantastic episode in the “Refit” series. Get some loose overalls, it’ll save any scars on your legs, trust me mate. As all jobs go, its a can of worms, but eventually they all get back in the can. Wanna send you some things, but not sure where to? Cheers Malc- Qld
That is a really big project you got going there stu..
Big job pulling that motor, but you tackled it like a boss Stu! It will be much easier to work below without the Detroit in your way.
@DangarMarine
5 жыл бұрын
For sure Jack, really looking forward to having all that room to move now.