Removing & Fixing a Ignition Key Cylinder 2001 Dodge Truck

Автокөліктер мен көлік құралдары

In this video we are removing & fixing a key cylinder on a 2001 Dodge Dakota Pickup Truck as the ignition key cylinder is sticking causing the starter motor to stay engaged when starting the truck. The starter motor burned out because of this so we are removing the ignition key cylinder assembly to try and repair or replace it. We end up lubricating the key cylinder and fixing the sticking issue so we show how to reassemble everything and test it out in the truck.
Support BoostedMotorsports by JOINING Today! / @boostedmotorsports
*Checkout other cool products Boosted Motorsports has tested and recommends HERE* 👇
www.amazon.com/shop/boostedmo...
👇 *SEND STUFF TO THE BOOSTEDMOTORSPORTS P.O. BOX* 👇
PO BOX 1873
San Jacinto, CA 92581
or
315 E Esplanade Ave
#1873
San Jacinto, CA 92583
For transmission parts check out WIT
Contact Clint (937) 262-7452
Mention Boosted Motorsports and save 20%
www.wittrans.com/
Disclaimer:
Due to factors beyond the control of BoostedMotorsports, I cannot guarantee against improper use or unauthorized modifications of this information. BoostedMotorsports assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. BoostedMotorsports recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of BoostedMotorsports, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not BoostedMotorsports.
As an Amazon Associate I earn from qualifying purchases. Products in the provided Amazon links are my recommendations based on honest use and experience with them.
#Dodge #Key #Ignition

Пікірлер: 39

  • @leakyjeep5.9
    @leakyjeep5.94 жыл бұрын

    Been missin your vids man!

  • @BoostedMotorsports

    @BoostedMotorsports

    4 жыл бұрын

    Got a lot of vids coming this week! 💪

  • @HumanzeeTamer
    @HumanzeeTamer2 жыл бұрын

    That helped me a lot, thank you.

  • @kthandyman47
    @kthandyman47 Жыл бұрын

    I just took one apart yesterday. Between the key being extremely worn and the gunk buildup of dirt and brass filings, it was a mess. You can take it apart by dressing the retainer pin and turning it until the tab aligns will pull apart.

  • @mikemccabe7124
    @mikemccabe71244 жыл бұрын

    I bought a new one on Amazon for $10 and havent had a problem ever since and I have a keyless entry on the alarm so I dont worry bout the doors and I did hide a key with the magnetic hide a key on the truck if I ever lost battery power so

  • @MichaelSmith-kr9qw
    @MichaelSmith-kr9qw4 жыл бұрын

    My Original Key does the same thing but the spare key works perfectly sometimes the key itself wear out.

  • @sdkiddavk9645
    @sdkiddavk964510 ай бұрын

    Thanks!

  • @ziggiesaquaticexotics8270
    @ziggiesaquaticexotics82704 жыл бұрын

    My key has come out for years now lol but that's it no other issues so I just leave it alone

  • @rtxrt73
    @rtxrt734 жыл бұрын

    What about the keylock button next to the key? Would that allow you to get into accessory mode?

  • @02mp9696
    @02mp96964 жыл бұрын

    The 08 to 13 gm trucks have same lock cylinder issues. And my 15 camaro has same issue. So bloody annoying. Problem with these newer ones, u have to pay for a key program and the cylinder. Also, soak the cylinder in kerosene over night. Might loosen up whats stuck

  • @beef9c1
    @beef9c14 жыл бұрын

    John, from what I see posted in your video, it appears that your truck was from flood prone from where unknown. You may want to remove the panels from the doors, kick panels to see any other stuck on dirt. Also, you may want to look up the history of your newer Dakota.

  • @BoostedMotorsports

    @BoostedMotorsports

    4 жыл бұрын

    Ain’t no floods out here in the desert. It’s just dust 😆

  • @bdogjr7779
    @bdogjr77794 жыл бұрын

    Awesome BM《☆》Great fix🤓👍🏾Never know when being able to take the key out while the engine is running might be a good thing :*: Greetings from⛾Florida🤳my friend🤓🗣🔊☮✌👍🏾

  • @christiansaenz6698
    @christiansaenz66983 жыл бұрын

    I took mine off and took it to a lock Smith...50 bucks good as new

  • @TheCrazyR1
    @TheCrazyR13 жыл бұрын

    I can turn my truck on and do everything else but I have a 1998 SLT laramie, the key is stuck and won’t come out, stuck on last hash mark, help???

  • @SVMSICE

    @SVMSICE

    2 жыл бұрын

    I had that happen in a 93 Chevy couldn’t turn off the truck or turn the key. It idled for 3 hours till the locksmith got there and fixed it for me. He said not every locksmith could do what he did to fix it 🤷🏻‍♂️ but I’m sure you’ve got yours fixed by now.

  • @DarrensTruckzs
    @DarrensTruckzs4 жыл бұрын

    Starter sounds weird is it new or worn out.. ? Or is it jus cause the difference sounding starting for v6 verses v8 Sound ? An I wouldn’t been so cheap jon I woulda jus put new switch in lol

  • @MichaelSmith-kr9qw

    @MichaelSmith-kr9qw

    4 жыл бұрын

    The starters are all the same....It did have a weird sound plus I noticed a lot of vibrations like it had a misfire.

  • @BoostedMotorsports

    @BoostedMotorsports

    4 жыл бұрын

    Starter was $25 so I can’t be too picky. Truck has a couple check engine codes I have to go through as well but at least it starts and runs for now 😆

  • @jackcurry1010
    @jackcurry10105 ай бұрын

    The button to push os on the bottom, not on the side. Push that and it's easy.

  • @mtsanchez27
    @mtsanchez272 жыл бұрын

    Do you guys know why my car doesnt do nothing when turning the key I have to start the key directly from starter

  • @maxlewis2234

    @maxlewis2234

    2 жыл бұрын

    can you tell me what yr fix was

  • @mtsanchez27

    @mtsanchez27

    2 жыл бұрын

    @@maxlewis2234 the issue was in the key cylinder.

  • @mtsanchez27

    @mtsanchez27

    2 жыл бұрын

    @@maxlewis2234 I disassemble it and put a little bit of WD-40 and after that the car is starting like brand new!

  • @oshionwolf9930
    @oshionwolf99304 жыл бұрын

    To bad you where not able to take it apart it would have been really nice to know why my Dodge Dakota's key pulls out when it in the run position. I sure hope it is not a purpose designed thing. :(

  • @lawrencejarrett5737
    @lawrencejarrett5737 Жыл бұрын

    How to change with out key

  • @seancorcoran4927
    @seancorcoran49274 жыл бұрын

    Message me if you have anymore problem I can explain how to get this ignition apart and rebuilt.. also good rule of thumb don’t use graphite. Even tho they say it is for locks it thickens.. I worked for a lock smith for many years a while ago I always cleaned the lock with breaks parts cleaner while running the key in and out then used a good lithium spray grease.. no WD-40 there new formula is water based and will turn rusty over time

  • @SVMSICE
    @SVMSICE2 жыл бұрын

    My key comes right out too. Always has for the 15 years I’ve had my truck. I like it 😂. I’ll start my truck let it warm up and I can lock the doors and have my key in my pocket. I’m starting to have the issues you are having and I don’t want to replace it because I know then I can’t pull out the key 🤣 Anyone know how to hack it and make the key come out on a new one?

  • @cad1995
    @cad19954 жыл бұрын

    The flip flops are back!!!!

  • @BoostedMotorsports

    @BoostedMotorsports

    4 жыл бұрын

    It’s that time of year! #flipflopmechanic 🤣

  • @davidledford6482
    @davidledford64824 жыл бұрын

    hope that deal has not been underwater etc on yours...call locksmith,or smoke a joint,an then you may get er done...

  • @davidledford6482
    @davidledford64824 жыл бұрын

    steering wheel locks doin 70 down the road,o hell no...

  • @davidledford6482
    @davidledford64824 жыл бұрын

    i would never risk that,its half way...an remember...call a locksmith...

  • @XJaBr0niK1LERX
    @XJaBr0niK1LERX4 жыл бұрын

    Why not do an engine swap?

  • @BoostedMotorsports

    @BoostedMotorsports

    4 жыл бұрын

    I wouldn’t be able to register it out here if we do that. 🤷‍♂️

  • @davidledford6482
    @davidledford64824 жыл бұрын

    i told my daughter, call the lockssmith, she had lost the key,an then had to get a steering column, 80 bucks for a phord,then we had terrible fight,an im blocked,an dont know if phord place fixed her car or nuthin whatsoever....

  • @fabian4213
    @fabian42138 ай бұрын

    If it helps anyone take a look at ray dabs 01 dakota.

Келесі