I use the empty cans to grow herbs in.

@chris

4 жыл бұрын

Perfect!

Is this just me or has the smell of an aluminum can never been a factor

@eliaschevette

2 жыл бұрын

it doesn't matter on light beers but it makes a different on heavier beers. Specially IPA and Stouts.

@levitillman9507

Жыл бұрын

Never... ipa, lager, apple juice, or even water.

This gadget is ideal for any camping situation,so everyone can reuse the can for all the drinks. Or if you want people to think you’re drinking a soda,when you’re really drinking a beer.

I just bought one from EBay, on here to find some ideas for it, great video

I've been using an old school can opener to do this for years for beer can chicken. This tool will make it much much easier than wrestling and cussing my can opener 🤘

@chris

4 жыл бұрын

Yes, and probably won't mutilate it as much! 😂

Man, I just end up crushing the can every time.

They have newer models of draftop can openers that work far superior to the original 1.0. I work for the company that molds the parts for the device and it's such a delight to see this video floating around. To see small businesses promote each other is awesome. Great channel. You have a new subscriber.

Thnx, i didnt know how to use it. I'll be making miniture kitchen ware for dolls

Here we have liter cans with wider rims, I wonder if this gadget is adjustable for bigger sizes.Do we need to get it sharpened every now and then ? Can I also use this tool for empty cans ? Thank you

I bought some beer here recently in Australia, Colonial Brewing Co. Pale Ale, and the ring pull takes of the whole top, so you get a can just like what's happening here. I hope it takes off with more breweries.

@chris

4 жыл бұрын

That's cool and would be great!

A normal can opened will do the same. Now if they have a way to pull the lid out after that would be cool.

@montagistreel

3 жыл бұрын

no it works differently and always makes a jagged edge

Would it not be better to put the dring in a glass?

Is there a way to do this in reverse? I ask this because I have a can without a top that I want to save but it has no top on it and if I removed a top from one can I could put it on another if this makes sense to people.

I like the point you brought up. Smell the drink as you drink. Noice!!!

@chris

4 жыл бұрын

It makes a huge difference!

@athensmorningstar7809

3 жыл бұрын

...but can't you just put it in a cup is my question its cool but...cups exist

great for recycling the can after you've drunk the contents. plant pot, container, etc

I have a can opener that does the same thing without the lids falling into the lid.

@ruthingle7074

3 жыл бұрын

So what kind do you have that doesn’t have to have lid drop inside?

@bgpva1937

3 жыл бұрын

@@ruthingle7074 ditto! hoook us up with some details, please! :-)

@mathewwoolhouse7895

3 жыл бұрын

@@ruthingle7074 Magican

This is awesome tool. How do I get this in India.

Can you recan that same can you took the lid off?

Hey friend can I reseal my soda for later using the same can n new lid?

Have you ever seen those soda can solar heaters...this would make it so much easier to construct..pretty cool invention

@chris

4 жыл бұрын

Whoa! I've never even heard of that. Crazy. Thanks for the comment!

RESULTS! I use to do this with a regular can opener

@FlameGod23

3 жыл бұрын

Sameee

@kristinaalavanja9914

2 жыл бұрын

@@FlameGod23 did it work ? My dad took mine to try and ruined it :( Now I have to buy again...

@khloe38

2 жыл бұрын

I just bought beer cans to do this, but my regular can opener did not work. The recess on tòp of can was too deep for my can opener to reach and get traction. I was in search of another solution when i found this video. Either your cans were made different, or my can opener too small.

I could drink two beers by the time it takes to get one lid opened

What about an empty can and u want to take the lid off to reuse the can? Other people give me the cans and I use them for stuff but I get them empty.

you can do that exactly the sale with any can opener.

I do NOT need this but I WANT IT !!!!!!!!!

I love this thing however how do I get the wrinkles out after I remove the top????

@cthomasv

2 жыл бұрын

That's my complaint too.

@joannekeefe426

2 жыл бұрын

You can use a razor or exact knife and just score it till it comes off

You can legit do this with a regular can opener it works just fine if not better

What is the name of the tool ? Where to buy ? :(

I hope you're thoroughly washing the can before dunking the top into your drink, and then thoroughly washing your finger before using it to fish out the top.

@poabeaving

4 жыл бұрын

I hope you wash every can you ever buy on the go too.

@jaxonpallone9344

3 жыл бұрын

I hope you continue to lecture people on the KZread comment section for the rest of your life

OMG lol i like the v8 can idea one

So you get to stick the likely dirty tool into your drink immediately after you use it, in order to push down the lid which is also probably dirty, in order to drink a beverage from a can even though it should have been poured into a glass?

@erinsaluga5274

4 жыл бұрын

You don’t know how to wipe something clean before you use it? This could be the corona issue we have in this country... don’t buy it if you don’t want to use it.

Nice idea but the cans are so thin they dent like crazy. Any idea how to firm up the can? Like maybe coating the inside with resin?

@keekwai2

Жыл бұрын

They are single use.

@aparnamitra1287

Жыл бұрын

You can freeze the can before cutting the lid. But, don't keep in freezer for too long.

I hope you open up a Duke’s Drinks on the east coast!

@chris

4 жыл бұрын

Working on it as we speak! 😂

Thanks for your video. Can this tool be used to cut the bottom of the can?

@chris

8 ай бұрын

Thanks for watching! But no, it is only for the top of the can. It won't secure itself to the bottom in order to cut it. It requires that lip at the top.

Pretty cool.

@chris

4 жыл бұрын

Thanks for watching!

Can you use this tool on an empty can?

How do you check the bottom of a coke can? Or something that is dark colored? : "Dump it into a glass, check it for aluminum... if you're good, then dump it back into the can." . Is that what you're supposed to do?

Pretty neat! It would be cool if they put a bottle opener on the side just in case you don’t have any cans..

@chris

4 жыл бұрын

Great suggestion!

@AutobahnDan

4 жыл бұрын

Chris Duke 🍻🍻

@AshBuxton

4 жыл бұрын

I believe the original (wood and metal) model did have a bottle opener on it

After cutting open, is it possible to pull upwards instead of dropping the top into the drink?

@chris

3 жыл бұрын

Sometimes it naturally pops up, so yes--in that case.

So someone invented a tool for a problem that doesn't exist?

Does it work on the skinny cans, like white claw?

@chris

3 жыл бұрын

I haven't personally tried it, but another person commented recently that they could.

Some cans need to be cleaned first.

Or you could just pour it out into a cup.

@chris

3 жыл бұрын

Ha! Well that's true :)

and the can also becomes a cool car coin holder

Here’s a life hack, use a regular can opener. You’re welcome.

That's the logo of "Luke's" restaurant from Gilmore Girls lol

@chris

4 жыл бұрын

It is! My daughter bought it for me :)

Most if not all CA California recycling centers will refuse to take these for the $0.05 CA redemption and only payout on the raw Aluminium weight, it at all. Just what I want a dirty lid inside of my otherwise sterile drink.

Can you re sealed the can again using the can sealer?

@colacurciolaw7745

3 жыл бұрын

Just play the video backward!

They need to come up with something better that is too many turns to have to get it cut Maybe make it electric can opener rather than having to do it manually . What? I just gave somebody $1,000,000 ideal invention . Don't forget to bless me

Thanks for the video, Chris. I purchased the Mintiml, which purportedly does the same thing from another different, yet, outstanding Chinese company. Complete garbage. However, your product is a bit larger design and may do the job. Hoping to see a few more positive reviews and then maybe I'll take another chance. Not sure why I want this, but it does seem cool, if I can find one that actually works as designed. Don't think I'll be getting rid of that sleeve of Solo cups anytime soon, but let's see. Thanks again.

My opener doesn’t work properly

I have two. Unfortunately, none of them manages to open my cans of beers.

@infantrywagon

3 жыл бұрын

There was a bad batch that had came out at one point. You most likely got two out of that batch if you picked two up at the same time. If two at different times it could be user error as you see with him he uses it quite a bit and still Failed on the bud light can at first. Either way there’s the draft top 2.0 out, but a can. Opener does the exact same thing. On the 2.0 Still have to grab the top out of the can after. Idk why they haven’t made an update on the new one that allows the top to come off with the tool after it cuts the lid free from the can. At least they could have made a hook to where you can open the can prior to opening it, cut the top off and have some type of lip on the tool that goes into the mouth opening and allows you to pull it out that way, or grab the tab and remove without getting Your hands wet. The reason I’m so invested in something like this is I drink the 450 north and other good brand slushy beers. You can drink them normal or hence the “slushy” name, you can toss them into a freezer for 20-30 minutes and it’s made or turn into an actual slushy. You should see what the can looks like after the purple Have gotten the slushy out of the can through the small hole. If they didn’t get frustrated within the first minute and just cut the can apart with a knife a scissors 😂

Does it work for the bottom of the can?

@chris

5 ай бұрын

Nope

Do you still have this tool? Went to the website to get one and they are unavailable. I sent an email to the company and was told they will be available in a few months. I need one today for some projects I am working on. Willing to pay real money for it.

@chris

4 жыл бұрын

I do, and use it all the time... but it's not for sale. Hopefully they will get some news inventory sooner than later!

WIll this work on a white claw can? smaller diameter?

@SamMcAlister

3 жыл бұрын

Same question here

@chris

3 жыл бұрын

I haven't personally tried it, but another person commented recently that they could.

At lest didn’t spill beer everywhere

why don't they just make 'em like a fruit cup pull tab cover? Also, I've seen aluminum cans before filling and sealing, and they look like your end result. (I haven 't seen how they compress the lid onto the can though). are you sure this thing is CUTTING the can? maybe it's just twisting off the lid...

@athensmorningstar7809

3 жыл бұрын

The construction of the can adds the "lid" by basically folding the edges over each other forming a seal that won't break off easily...aka yes it is cutting it

where do i order one??

@chris

4 жыл бұрын

See my link in description :)

Could you use this on empty cans?

@chris

3 жыл бұрын

Yes you *can* :)

Coming to the show late. 2021. Aaaaaaaand the chinese are in like dirty shirts with the copies for $10bux. Patent wasn't strong enough I guess. But still a very slick idea.

This needs a strong magnet!

@jameselkin5045

2 жыл бұрын

Aluminum is not magnetic

Can it open a slimmer can like a white Claw?

@chris

3 жыл бұрын

Nope.. those are too small

@SamMcAlister

3 жыл бұрын

@@chris I ordered one and happy to report is removes White Claw tops easily.

@chris

3 жыл бұрын

Wow! Really? I heard it was too small of a diameter... great to know (I haven't tried anything smaller than a normal size can yet)

@SamMcAlister

3 жыл бұрын

@@chris I was happy with it. We like White Claw and our baby like to play with cans so this makes it nice and smooth for her to hold. Very impressed with the new V2 model

Just use a can opener

this is the same as the Go Swing Tool? so it seems.

@ClaytonGinther

4 жыл бұрын

Pretty sure that's just a Chinese knock off.

Nice device. But there should be better ways to remove the top. Couldn't you keep the device in place and pull the top off with it?

What the name of the tool?

@chris

4 жыл бұрын

DraftTop

@paulnayacatabu8390

4 жыл бұрын

@@chris Thanks Chris.

@paulnayacatabu8390

3 жыл бұрын

Thanks Chris.....

You could just open the can first, push the tab down, remove the top and use that tab to lift it off. What happened to Motorz? :(

@chris

4 жыл бұрын

Exactly one of the tips I share in this video! As for Motorz, new episodes are no longer published to KZread. You can find it at www.motorz.tv, TV, and Amazon Prime Video.

The tops of the cans can be terribly contaminated. Then you punch them down into your drink????? I don’t think so!,

There’s a tab on the top that opens it if you pull it up

Can opener

@CalebDB

2 жыл бұрын

Or just pour it out

@ericcastle380

2 жыл бұрын

Why, yes! Yes it is a can opener! 🙄

Nope.. I don’t wanna stick the dirty lid INTO my drink.. and I’d rather not have to “pick” away at grabbing the lid. A little bit of a mess..? You should be SOBER and have a flat table to wipe down after messing with this thing. Bring this tool with you.. lol. C’mon. Let’s go brandon

...and the carbonation will leave the can more quickly...still kinda cool.

Its not supposed to be DUKES it’s supposed to be LUKES and it’s correct it’s from a show called the Gilmore girls

@chris

3 жыл бұрын

Yes I know :) My last name is Duke, so it was a pun...

Don't wanna smell the aluminum but you're gonna taste it pushing that in, I don't really understand the use for this

@JamesAnthonyHull1

2 жыл бұрын

The whole cans aluminum. I don't think dunking aluminum in it changes that

Best not to let the top of the can drop in....Bacteria and things like that

@richardkrause9385

2 жыл бұрын

Well you put your mouth on that area without this tool too. So there is no difference

@hayden_howse

2 жыл бұрын

ok boomer.

Is this patented?

@chris

3 жыл бұрын

At the time of this video, Patent Pending... see 1:24

I don't want no top in my drink

Your nose still hits the rim of the can though

lol

Send me one

Thats more than a 90 degree twist, and I'd argue that "tool" to remove it isn't much of a tool. Poking the filthy lid into my drink? Sticking a dirty tool and or fingers into my drink? Check for "possible shavings"? This thing is an all around fail in my book.

@chris

4 жыл бұрын

Like I said in the video, it just depends on the can, the amount of pressure, etc. Some cans open up a lot quicker as seen in the video. As for your "filthy lid" comment, most people put their lips right up to a can without wiping it or cleaning it whatsoever, so what really is the difference? You can also pull the tab before using the tool so there's a minimal dunking of the top when you peel it up instead of pushing it down. Yes, the "possible shavings" is just a precaution (kind of like McDonalds telling people that their coffee is hot), but as I noted in the video--I've never seen one and I doubt I ever will. Overall it's an excellent tool, and no--I'm not paid to say that. I just think it's pretty f'n awesome and I will continue to use it all the time. Not a fail in my book! Thanks for watching 👍

Send me one and ill see if i like it. k, thanks!

@chris

4 жыл бұрын

I wish I had an endless supply to send out, but I only have one that I'm giving away. Just visit my IG @chrisduketv and look for my post

Cant u just use a can opener🤣

@caffeineTX

3 жыл бұрын

yes

0:15 welcome to 2020 Corona virus 😷 extra 🍻

there tool ^^ but you act as there would be ^^

Why would I want to smell my drink I'm just drinking it

It's sad and nasty put your fingers in the beer

Terrible Idea.!!! Who wants the whole aluminum "lid" floating & sinking into the can of drink.?? Yuck.!!! Then, if ya want the lid "out of your drink", then you have to stick your fingers into your drink to TRY to pull it out easily. YUCK Again.!!

just open the can and pour u r self a glass!