OMG, so glad I found your clip! I was one step away from throwing the beast out the window. I didn't have industrial alcohol so I used vodka! Now the printer's happy and so am I. :-)

@tjlang5959

2 жыл бұрын

I hope you saved some vodka to celebrate your success

@imSovi

Жыл бұрын

@@tjlang5959lol

A thousand thanks to YOU!!!!! My printed sheets had faded horizontal lines about 1/8" wide and about 4" apart. Thought I'd have to pay for repairs or $400 for a new MFC. After watching your video, I looked at the roller and saw what appeared to be one permanent scratch about 1/8th inch wide the entire length of the roller. I used 91% alcohol (had it on hand) and soft toilet paper. It took me about an hour of really vigorous scrubbing to make it disappear. The 1st printed sheet looked twice as bad as before cleaning. I forgot to let printer warm up, so I let printer warm up about 1 minutes and printed again. Every sheet after that 1st one came out PERFECT!! You saved me a trip to repair shop who may have sold me a $400 printer. Jack, home business, Las Vegas.

Omg you are a life saver. I thought my drum was messed up and was going to break this printer into pieces because i was pissed. I did what you did and found out that a small debris was stuck in the roller and it keeps giving me a vertical line. Thank you so much

So simple! Should have been obvious to me, but it wasn't. My somewhat elderly MFC-8480N's drum was barely visible under the built up toner residue. I wish I had found your excellent video sooner, but I'm just glad to have found it at all.

Has anyone told you today how much you rock? Well, if not, I'll start the line! Thanks so much for your excellent tutorial. Cleaned the toner drum and bam, problem solved. You're the bestest! Thanks!

OMG you are a life saver!! I was about to take my printer out back and shoot it but now it works perfectly!! Thank you so much for this video!!

@jawary8474

3 жыл бұрын

Not at all serious just the drum needed to be cleaned lol

Thank you so much! I was getting a black streak across the page. Also with multiple pages some pages had dark smears on the ends. I used your method to clean the drum and corona wire. Had to do it twice, but now all is well again!

Thank you! Great video! I just cleaned my drum (large green roller barrel slowly turning it to find the spots) with my eye glass cleaner & Q-tips and was careful not to have excess cleaner on the Q-tip and was very patient and gentle AND IT WORKED!!! My printed documents went from having black spots all over it to just 1 and I will be working on that one next 🎉🎉😊👍

Lines on my printouts have been an ongoing problem. I have a color printer which holds 4 cartridges. I would run through several test prints that seemed to help but not completely. Ran the green tab back and forth many times but did not take care of the problem. Used your solution and it was joyous to see the lines were gone! Thank you so much!

OMG! Thank you so much for doing this video! Had already bought a new printer several months ago because of smudge lines on old printer then when new printer started doing the same thing...luckily, I found your video. Cleaned away small debris spot and voila perfect printing! Did same on previous old printer and also great printing now. Really appreciate this!

@naticaleb123

2 жыл бұрын

Hi, does this work on color toners? Despite full cartridges, my pages come out faded. And My edges come out super faded and streaky.

Worked excellent. Print looks like new (I had a black horizontal band across the page). I did purchase similar Isopropyl alcohol wipes from the local drug store ($3 for 100 in the first aid section) and used a bunch as they are tiny, but it rubbed off some of the caked on toner really well. It dried quickly and didn't scratch anything. Thanks!

Very helpful. My pages were printing 3 vertical lines and after following the instructions, it's all nice and clean like a new printer.

@Jean78578

28 күн бұрын

Great to hear!

This video was a HUGE HELP!! It saved me the hustle to speak to support and probably also the charge for a new roller. Big thank you!!! ❤❤❤

@Jean78578

10 ай бұрын

Glad it helped!

THIS WORKED SO WELL!! THANK YOU for helping me solve this problem I've had for months!

Thank You so much. I was actually just going to buy a new printer. Im super impatient and didn't want to deal with it. Excellent video.

Thank you, you're an angel. I do like people who get to the point quickly. 10 mins and my printer is all the better for it. Cheers...

Thank you so much for your help. We were about to buy a new printer or drum and you saved us about $100 dollars!

Worked great, thank you. There was a big buildup on toner on mine from a paper jam that got pulled out and left the remaining toner on the roller.

Thank you so much for this video! I, too, was about to buy a new drum and toner cartridge. What a great service! You are a tech angel! 😇 🌞 😃

Thank you so much! I was cleaning the rollers and not having success, finding out about the ink-roller was awesome!!

I wanted to say u are really a life saver, but I think u already know that. So I just want to say thank you for this video

I cleaned the Roller and noticed it was metalic green. I changed it & used a new DR-620 tray that Roller was black and it printed perfectly. Gues that was my Q to change it out. Thank you very much for your valuable assistance.

Short and sweet! Thank you so very much!

Thank you so much! I have a wonderful Brother printer and I'm getting these lines and this is a simple fix. Bless you! =)

Great video, saved my printer. I thought it was done and had started making plans to go purchase a new one. Works fantastic now!!

@Jean78578

6 ай бұрын

Glad it helped

This worked for me. Thank you so much. I was getting dime size black smudges every four inches. Evan bought a new toner. Watched this video and now it works perfect again.

Great tech support video. This is the only KZread video that worked and helped resolve the problem. Thank you very much.

My issue ended up being that the little green tab wasn't all the way to the left, and pushing it back into place fixed the line of ink for me. Thank you!

What a great video, I was about to buy a new printer because of this mark on the drum, you've saved me a small fortune !!!!

God Bless you for this video!!!! I had no idea that I had to pay attention to that, and mine had lot of build up, now my printer is printing crystal clear pages with vivid ink, I'm so glad. I was so confused as to what the problem was I was even considering buying a new printer!

@stinkycheese804

2 жыл бұрын

Even if that didn't work, there was no need for a new printer, at most this issue is resolved buying a new cartridge, or in the case of some brother printers and other larger printers, the drum she cleaned is sold separately, so after a certain # of cartridges the drum will be worn out and need replaced. Just remember, if you buy some generic cartridge and it still prints poorly, might be the drum or vice versa which is why you need to stick to genuine OEM parts to have best results and they are matched for each other which some aftermarket, they try to push on consumers the same toner for different printers when the toner formulation each is supposed to use, is not quite the same.

@bigImranAbbasfanMD

2 жыл бұрын

@@stinkycheese804 True about the generic cartridge and aftermarket parts leading to potential issues, thanks for the information

Your step-by-step made this an easy job. Thank you!

@Jean78578

11 ай бұрын

Glad it helped!

Holy smokes was this helpful! A week ago I started seeing this large splotchy mark in the middle of my paper - I thought I'd gotten some water and dirt in there from a nearby plant...turns out it was a BUG CARCASS!

Thank you! Glad I found your vid. I was just about to buy a new drum too...

GREAT!! My Brother HL-2270DW is from 2013. The drum still has 2/3rds life left! I was noticing streaks in the print output. I will do this for sure! THANKS!

Thanks, you saved me from hours of frustration.

My goodness, this was so helpful. Thank you so much!!

Thanks for this, out of all the useless youtube videos this simple trick was the cause of my grief!

@Jean78578

4 ай бұрын

Glad it was helpful!

Thank you for sharing, it works! I’m proud I made it!

Thank you! Couldn't believe how dirty that roller was.

Thank you so much! Finally, I got rid of these annoying ink patches!

This is helpful and simple to do. Thanks!

You are a real Angel. Thank you so much. God bless you with more tech power.

Thank you! Very informative and worked like a charm.

@Jean78578

23 күн бұрын

Glad it helped!

Thank you for this great video! I was able to fix the problem in seconds. :)

Thank you so much your technique worked like magic

Yes thank you worked for my printer!

t Thank You. This was much better after I did what you show. What a lifesaver!

This worked like a charm!!!! Thank you so much!!!!!!!

Thank you for the video. This fixed my copies and scans :)

Thank you so much! I did a light dusting of it without looking for the actual problem. I didn't understand why the smudge remained.

Simply great!!! Thanks a lot. It was so helpful

I am your biggest fan!!!

@Jean78578

2 ай бұрын

Awesome! 😎😎

Thank you! Worked perfectly!

Thank you! Exactly what I needed. Just wish I didn't have to keep cleaning the darn drum. But at least it's an easy fix. It also appeared to help with making sure the toner sticks to the paper... the pages were easily getting smudged and this fixed that as well. Well, it fixed it for about 50 pages. Now it's got ink splotches at the top and not sticking completely again. Looking for another video that addresses this issue.

@stinkycheese804

2 жыл бұрын

If your drum gets dirty again that fast, either it is worn out or you are using aftermarket toner with the wrong formulation, or leaking cart is leaving deposits behind. Leaking can also mean the cartridge waste hopper is full and needs emptied but on printers this size it is often not user serviceable meaning to DIY empty it, you'd have to drill or melt a hole then after emptied, come back with a plug or tape over the hole. To be clear I am talking about a separate reservoir more towards the front of a cartridge that collects stray toner, NOT the larger main reservoir that holes fresh toner.

Thank you, your tips worked great for me!

Thank you so much. Excellent clear to the point video. Solved my problem. God bless you.

@Jean78578

11 ай бұрын

Glad it helped

Thank you so much, this worked great!

Thank you! It / you actually helped me clean ot my printer at work! 😌

Thank you so much. Your videos helped me

This was very helpful! Thank you. 👌👍

this is really helpful. thanks a lot bud

This worked perfectly, thanks

Thank you so much! Fixed!

Thank you! I was about to buy a new drum

My problem was spot printed at 75mm. I cleaned and worked.

@Jean78578

9 ай бұрын

Awesome

Worked like a charm

Thank you this really did a trick

Thanks for your informative video :)

@InclinedTherapy

4 жыл бұрын

Sorted my printer out thanks to your video :)

Very helpful. Many thanks!

THANKS LOT OFF . IM TOTTALY CONFUSED WHAT HAPPEND PRINTER .BUT THIS VIDEO VERY HELP FULL

Thank you very much! It worked!

Thanks. That was very useful.

worked for me too - many thanks

You and your awesomeness!

Very useful, well presented

worked perfect, bravo.👏👍

Thank you for advise it worked

Very helpful, thank you

Most helpful video

Thank you s much! This is very helpful indeed

My printer leaves roller marks. Not a toner issue. Just roller marks..its done this since the day I bought it. It leaves like 3 lines that run all the way across the paper that you can only see at certain angles in light. Is that a common issue?

Basically clean the drum and the housing!

@Jean78578

Ай бұрын

Yes, basically.

It's a big help. Thanks a lot. :-)

Thanks for showing the video. It was very helpful

@Jean78578

Жыл бұрын

You're welcome!

@kodaiwu0001

Жыл бұрын

@@Jean78578 thanks for the technique you showed to us. Saved a lots of time and money. Cheers

You little angel. Thanks.

Thank you so much!

Very helpful. Thank you

What is the name of the roller that you were cleaning in the first time? Thanks

Thank you!!!

Thanks. this worked for me.

@Jean78578

Жыл бұрын

Glad it helped

great video!

@Jean78578

9 ай бұрын

Thanks!

Thanks. Work also for a big smudge across the top of my papers too

@Jean78578

7 ай бұрын

Excellent!

Thanks for the video !!!

How do you oil it? My paper keeps getting jammed

Thank you so much!!

I gpt half the page printing after i moved the manual brightness setings..

Yaaaaay...u r the BOMB 💣

@Jean78578

11 ай бұрын

Glad it was helpful..

I just bought this Brother laser printer and it has left a heavy streak on the edge of the paper. I did a cleaning but it's still acting up. I really think it might be worth replacing the cartridge. What is your recommendation? This is supposed to take the TN 760 or the TN 730. Thank you.

@Jean78578

11 ай бұрын

If it's still leaving streaks, I would try replacing the toner. Also, double check any other visible rollers for gunk, specs of debri, etc. If you get streaks when scanning, carefully clean the scanning glass.

@comicsgrinder

11 ай бұрын

@@Jean78578 Thanks!

Brilliant!

Thank you 🙏