removal plastics scooter pcx 150 led easily and quickly
Автокөліктер мен көлік құралдары
honda pcx 150 led all plastics removal.
how to remove plastics with a plier
music Jarico - Island [NCS BEST OF]
pcx how to lighten the rollers on the scooter.
• how to lighten the bal...
Пікірлер: 80
Thanks for the video! In the future it would be helpful to slow down the video, and use more zoomed out shots to provide a better context for where all the fasteners are located. Thanks again, keep up the good work!
@MBPATENTS
2 жыл бұрын
Thank you for your comment! I put my videos on high speed because I don't want them to be boring during any process.
@kibiworld_
2 жыл бұрын
@@MBPATENTS not boring, but helpful! : )
@MBPATENTS
2 жыл бұрын
Thank you very much!!! 😉
@JQUICK21
Жыл бұрын
You can slow down any video on youtube yourself.....you didn't know this?
I was wondering what needs to come off to change the front side panels only. thanks for the video, it very informative.
@MBPATENTS
3 жыл бұрын
Thank you very much for your good words!!!
Fantastic!! ❤
Thanks a lot, dude!!! I love it when I find the perfect Video ( paint by number) GREATFULL
Hey man, I know Im pretty late to the video. But, do you know where to buy new body for pcx? Im interested in changing my color to something else. Its gray with some cosmetic scratches
I want to take all the plastic off my Kymco AK 550 and paint them, but if you don't know how the pieces are hooked together you don't know how to get them off.....and you will surely break something.....taking things apart is sometimes not so bad....but getting them back together nice and tight is no doubt a huge problem.....
@MBPATENTS
Жыл бұрын
if it's fastened with plastic, it needs a special tool and with a little care. If it's screwed, look a bit. What screws might be hidden underneath to go up, look, but everything comes out
How can we remove the plastics when we have no idea how they are connected? I have an AK550 scooter and want to paint the pieces/parts or fairings....but pulling and tugging on the pieces to get them apart can result in broken tabs. Then there is the issue of getting them back together perfectly and tight.....
@MBPATENTS
Жыл бұрын
with a little attention, everything is done when you pull the plastic, see more simio pulls with force
I just want to remove gas tank. What panels need to be removed?
Is it possible to change the facelift of a normal pcx 150 2014 to a LED one
@MBPATENTS
4 ай бұрын
Hi Multi I can't understand you can you describe me a little better
how did you remove the fuel cable line when removing the center cover? at 2:46 did you just pull it out?
@MBPATENTS
2 жыл бұрын
Hi kibiworld It is based on the frame, not on the top plastic.
I have exactly the same model and it vibrates/rattles when moving at low RPM. It is coming from front plastics somewhere. Do you know what it is? Thank you.
@MBPATENTS
3 жыл бұрын
If the run is ahead you should see under the counter under the led light whether there is a missing screw and no plastic spring is fastened. I had the same problem but with the double Stan he also looked at Stan
@corneilcorneil
Жыл бұрын
Kit all the gaps with silicone. Problem solved
Hello. Thank you for this Video. long Version maybe to be a very good. WE are not Expert.
@MBPATENTS
Жыл бұрын
Hi SALIH we are all experts as long as we want it and have a little patience!
Hello sir, i would like to put heated grips in my honda pcx125.I have ordered the oxford heated grips. I will need to connect the cables from heated grips to the battery. 1.can you tell me if i will need to remove any plastics to achieve that? what's the easier way ? 2.Where will i pass the cable from and to? 3. How do i remove the grips without destroying them? is it possible ?
@MBPATENTS
3 жыл бұрын
In the cupboard in front under the steering wheel you have a lighter charger and usb is the easiest way.
@FuzzyDPozzy
3 жыл бұрын
@@MBPATENTS I managed it then I realized what a pain in the ass was it and in the end I discovered how easy it was if I knew from the start at least it's working 😂
How long approximately is taking the entire removal process?
@MBPATENTS
3 жыл бұрын
About an hour.
@MBPATENTS
3 жыл бұрын
If you want to do it just be careful because they can break
I need a garage who can do a complete new body for my Pcx, 2015 london
@MBPATENTS
2 жыл бұрын
Hi Phil I can not understand you?
How can you remove the headlight only?tnx
@MBPATENTS
3 жыл бұрын
If you remove the glass and the allo plastic floor from the glass and 2 small plastic floors from the light, you loosen the side plastics with a little care, it comes out if we are talking about the led.
HEY MAN I MANAGED TO GET MY SCOOTER GO AT 110KM/H BY FIXING VARIATOR SO ITS FINE NOW . WELL I GOT THIS ISSUE WITH BACK BRAKING RED LIGHT . IT DOES NOT WORK . WHEN I CHECKED THE WIRES THERE IS NO ELECTRICITY WHEN I PRESS THE BRAKE ....... SO WHERE WILL I FIX THE ISSUE ??? THANK YOU
@MBPATENTS
4 жыл бұрын
Where you press the brake handle it's possible that the valvid there is stuck. Put Wd40 and if it doesn't work, then you have to replace the valvid with a new one.
@reptiloidx8942
4 жыл бұрын
@@MBPATENTS what is valvid and wd40 ?????
@MBPATENTS
4 жыл бұрын
images.app.goo.gl/UmEjKWdPMze3W9g39
@MBPATENTS
4 жыл бұрын
images.app.goo.gl/rb7uQk1YYxtKUJ1L8
@reptiloidx8942
4 жыл бұрын
@@MBPATENTS THANK YOU I WILL CHECK TOMORROW IF THE WEATHER GET SWEET ..... I WILL LET YOU KNOW IF IT FIXED ..... THANKZ
can you make a more complete tutorial ?
@MBPATENTS
3 жыл бұрын
If I make a tutorial it will be a 2 hour video at least
@MBPATENTS
3 жыл бұрын
If you need help in something you can ask me anything!
@chrisstapleton7415
3 жыл бұрын
@@MBPATENTS I just bought a 2015 but the seat button doesn’t work. It is possible to get to this without taking all of the panels off?
But can you remember just how to put them all back together??
@MBPATENTS
3 жыл бұрын
Yes comfortable !!!
We're can I buy pcx plastics from ?
@MBPATENTS
6 ай бұрын
Ebay Amazon.
It's a pain to rebuild the PCX after remove.
@MBPATENTS
Жыл бұрын
harder to solve when you tie You know where the blind spots are When you give It's much easier
Nice job, but why so fast?
@MBPATENTS
Жыл бұрын
Hi Corneil thanks!!
@JQUICK21
Жыл бұрын
Did you know that you can slow down any video on youtube? Just click on the Settings icon at the bottom of the video next to CC or Caption icon.....then click on Playback speed.....
A esa velocidad no lo entiende nadie 😮
@MBPATENTS
7 ай бұрын
Hi hazlo Feliz año nuevo, de hecho tiene razón, es demasiada velocidad. Haré otro video con una velocidad más rápida. Gracias por tu interés!!!
Hello, how much video complet?
@MBPATENTS
3 жыл бұрын
hi Fawaz I can not understand you. What do you mean?
@MBPATENTS
3 жыл бұрын
do you need some help
@fawazguerra2612
3 жыл бұрын
@@MBPATENTS yes bro, need help you facebok pls
@fawazguerra2612
3 жыл бұрын
@@MBPATENTS yes, I need full video step by step
@MBPATENTS
3 жыл бұрын
@@fawazguerra2612 half a minute if I have it
I need this in reverse
@MBPATENTS
3 жыл бұрын
you start from the back and end in front
@MBPATENTS
3 жыл бұрын
are you stuck somewhere specific do you need help?
@roneyeam
3 жыл бұрын
Ni that is what I am doing just a bit of a pain to scrub backwards through the vids but thank you for replying and thank you for doing the video in the first place when I get stuck I'll hit you up
Hi where I can find vin number?
@MBPATENTS
2 жыл бұрын
Hi Eva k I can't understand what you mean?
Quickly isnt correct. Takes u 2hours 😂
@MBPATENTS
2 ай бұрын
Hi jasmij surely two days and both are a little
The video is entirely too fast to be of any use to the viewers. A swing and a miss. Cue the sad trombone sound.
@fare5674
8 күн бұрын
slow down the vid
@MBPATENTS
6 күн бұрын
Hi Fare thanks!! 😉
@MBPATENTS
6 күн бұрын
Yes it's lite faster 😔
Too fast!!!
@MBPATENTS
11 ай бұрын
Yes 😏I did it for a shorter time but I see that it doesn't help much