Thank you! It worked here in my 147. Good job to shows us the step by step in Multiecuscan. It helped me a lot. Kudos 🤟

@arcgarage

11 ай бұрын

Glad it helped!

@salvatorestirparo5256

10 ай бұрын

@@arcgarage Ciao. Serve l'adattatore A3? Ho provato con la versione 4.8 registrata ma mi propone solo la codifica della chiave e non del telecomando

@arcgarage

10 ай бұрын

@@salvatorestirparo5256 Hi, maybe try with other version

Thank you very much, now the remotes are working again for my Stilo :)

@arcgarage

2 жыл бұрын

Great to hear...

Thanks a lot, very helpful today!

@arcgarage

2 жыл бұрын

No problem, glad it helped...

Very interestin video. Thx a lot.👍

@arcgarage

3 жыл бұрын

Thank you...

I have the BCM code so all good there. One question, this does not affect the immobiliser function at all right?

wen you say enter security code, is what exacly? i dont have any code from de original key...

Hi thanks for this video both my remotes don’t lock or unlock my car but my car does start Can you advise I don’t have the codes I’m using the full version of multieecuscan

@arcgarage

2 жыл бұрын

Make sure that both keys are in working order first...

Which elm cable do You use, can You post any link to buy? Current one i have cannot opet bcm

@arcgarage

3 жыл бұрын

I am currently working on the MES full review video, and I'll list all of the details there. I will post it in the next few days...

Beautiful Alfa just needs a bit of low H&R with koni street is cheap and solid option, not hard but stiffness when needed and a 30mm drop

@arcgarage

3 жыл бұрын

Thanks, I was thinking about it but roads here are awful, lower suspension might do more harm than good...

@lucianoaliquo6629

3 жыл бұрын

@@arcgarage I thought so 2 but it brings the back side down, that levels the nose out a bit, I was due for a new springs and shocks and the H&R and koni was cheaper than oem🙈

@arcgarage

3 жыл бұрын

Might give it a go...

When programming the remote controls. If I program the 1st key placed in the ignition to the PPE position. OKAY. Do I then have to take that key out of the ignition and put the 2nd key in the ignition to do the same programming process? Then I have to remove the 2nd key from the ignition and insert the 3rd to program it? And this can be done until the programming of 8 keys? And if so, won't the program stop communicating with the car's ECU every time I turn the keys in the ignition? THANK YOU VERY MUCH

@arcgarage

Жыл бұрын

Yes, it was a while ago, the MES will instruct you, it won't lose connection

@GiannisTz-ce2nm

Жыл бұрын

Thank you very much. I think such a clarification was needed.

What ecu tool so you use to connect laptop with? And another thing, about locking and unlocking, I know some alfas have sound effect with it, do u know if it's possible to enable this ?

@arcgarage

3 жыл бұрын

I am using MultiEcuScan, I am working on the full review video right now, it will be uploaded in the next few days. Yes, you can enable that option...

@sanelb1147

3 жыл бұрын

@@arcgarage I am sorry, what I meant is what obd2 connector ?

@arcgarage

3 жыл бұрын

It is the ELM cable...

Thank you very much, Where can I buy the diagnostic elm? I have already the complete version of multiuecuscan

@arcgarage

3 жыл бұрын

I am working on the full review video for MES, it should be out in the next 2 days, it will have all of the details...

@bushopkran2841

3 жыл бұрын

@@arcgarage perfect thanx

I'm still a bit confused. So you took out the transponder out of the non-button spare key and also removed the "blade?" and then put both on an old case and then you programmed your old key in a new case plus another spare key with a foreign transponder? Did I get it right? And also, do I need the key card? I don't have one and my used Alfa 147 just came with the non-button spare key.

@arcgarage

2 жыл бұрын

You do need a key card. You got the first part right I got the transponder and blade out of the non button key, and put it in the button key which I then programmed. That's pretty much it...

@uranusneptun5239

2 жыл бұрын

@@arcgarage Thank you for the fast response! Ok, so I have to get a code card at a dealer ship? And with putting the transponder and blade from the old into the new, you just programmed the chip in the new key, right? Because you can't put the non-button chip into a button key, right? Thanks in adavance.

Hello what country you from.

Hello, i dont have my security code, i bought the car without it, also my question is if i can use others key code to reprogram or not?

@arcgarage

9 ай бұрын

No, you must get security code

je l mogu samo jedan kljuc da remote ili 2 i vise?, jer ja imam jedan originalni kljuc

I just completely lost the remote function on my only key for GT. I have no code card. The remote worked for 4 years normally, now just won't work. I replaced the battery, no luck. Any ideas what I can try? I can start it as before, just lost the remote funcion.

@arcgarage

3 жыл бұрын

If you got someone who fixes cell phones, take it there. They can check out if all of the button connections are OK. I fixed numerous 147, GT keys that way...

@djlosmi

3 жыл бұрын

@@arcgarage Good tip! Super weird that all of the buttons stopped working at the same time. Thanks!

I have an used (so, not virgin) Alfa 147’s key incl. transponder and remote. After having a fob key cut by a locksmith and transferred the remote board and transponder, is it possible to program it for an Alfa GT?

@arcgarage

3 жыл бұрын

That's what I did...

@ZwaanAfghan

3 жыл бұрын

@@arcgarage But you had a transponder in your spare key and transferred it to the other key with remote. I don’t have any spare key. I lost my key which had a transponder and remote. Currently I have one key with remote+transponder and I said an Alfa 147 key. Can the transponder of the 147 be programmed to work with a GT?

@arcgarage

3 жыл бұрын

@@ZwaanAfghan I am pretty sure it can, however, the MES warns that it is a risky to program transponder...

@ZwaanAfghan

3 жыл бұрын

@@arcgarage I see. And to be able to start the car with the new key, it has to be taken to a professional locksmith or dealer to do this part, right?

@arcgarage

3 жыл бұрын

Yes

Hi, i bought a second hand car, ofc, and i don't have the bcm key code. Also only one key came with the car, the one without the buttons. What do you suggest is the easiest way to get remote controls. Thx in advance! The car in question is a 2005 alfa 147 facelift 1.6ts if it matters

@arcgarage

5 ай бұрын

Hi, get a code from dealers and program the remote using MES

@A7XstefanA7X

5 ай бұрын

@@arcgarage thanks! But that will be rather expensive, is there another way to get the code? Since I can take it to a locksmith and he'll do it for 100-ish euro and i guess a code from an alfa romeo dealer will cost about as much. I'm kind of tight on money right now so I'm looking for a cheaper diy option.

Znas li, da li je moguce programirati fob od Mito-a na alfu 147? rade na istim frekvencijama 433hz ...

@arcgarage

9 ай бұрын

Ne znam, ali dobra ideja

I saw that your car is the jts, was wondering if the engine is being reliable as many forums say stay away from jts engines, thanks.

@arcgarage

3 жыл бұрын

My GT is 1.8 Twin Spark. JTS engines are not bad, but the direct injection configuration proved problematic for most car manufacturers. It's the nature of the engine... The most important thing you should consider is the overall condition of the car.

@Zeghetank

3 жыл бұрын

I just bought in the summer a GT JTS. I also have a 156 2.0 TS. Watch out the JTS oil maintanance because I just found out why one of the lobes on the exhaust camshaft has a significat wear! Poor oil maintanance! Bad oil specification or changed too late! All a JTS needs is an oil catch can and maybe a valve clean. Oil consumption si mostly from valve seals. That's it.

Hello, where do you get a new remote key? Can it be used and already programmed to a scrap car or it must be new one? I have seen some new ones on ali express for around 25 euros, but I am not sure if I should go for it. My car is 2004 alfa romeo gt.

@arcgarage

10 күн бұрын

Hi, I would get one from the scrap

@philipgligorov5848

9 күн бұрын

@arcgarage So I can program a key from another alfa romeo gt which is scrapped to my own gt?

Can you also programm the transponder chip with this program and cable?

@arcgarage

2 жыл бұрын

Yes, but it does give you a warning for potential ECU damage...

@dariusdarabant6232

2 жыл бұрын

@@arcgarage And can that be done at an Alfa Dealership without the risk of damage? Thanks!

Hello mate. I have an ar 147, 1.6, 105hp. I buying 1 year ago, but the car can not be close, open from remote key. Only with key from any door 😁. Now, problem it is. I do jot have security code for my 147. How i can get that code? Thank you

@arcgarage

Жыл бұрын

You can get the code from dealership, but take your keys to cellphone repairman and have them check all of the connections. that is usually the issue, I have fixed many keys that way

Hi mate I have the same problem and I did the procedure with Multiecuscan as shown but the car doesn't detect the remote when I press the button. It fails everytime, I tried with another remote and it fails the same way. I start to think the problem comes from the receiver in the car. Any idea ?

@arcgarage

4 ай бұрын

Make sure to test both keys and receiver, if the problem is with MES contact their support, they will help you out

@romleprom

4 ай бұрын

@@arcgarage How to test the receiver on the Alfa 147 ? It seems to be integrated to the body computer and not a separate module like on the 156 for example.

It's been months since my key was washed in washing machine. It doesn't work. Any possibility to make it work again?

@arcgarage

3 жыл бұрын

If I had to guess, I would say internals are the issue, but you could try to reprogram it. If it doesn't work, you can always buy the used key (replace parts like I did), and program it to your car using this procedure...

Hi, what's the mileage on this car? Just want to compare steering wear to mine if it's normal for the mileage I have

@arcgarage

Жыл бұрын

Hi, 185k

@ziggy748

Жыл бұрын

@@arcgarage thanks!

Hi! Do you know if the "Key Code" is stored in the Body Computer Module, or is it stored elsewhere? My Alfa 147 BCM was destroyed after some drops of water got inside the grey box. I bought a replacement BCM in a scrap-yard, thinking that MultiEcuScan could reprogram my keys. I don't have that software, but I'd like to know if it can help me before buying it (at the moment, the immobilizer works, so I cannot start the engine). Can you tell me?

@2WheelDerness

Жыл бұрын

usually is a card on the car documents together with the original manuals of Fiat...I cant find mine...

Hey. Where did you find your elm interface ?

@arcgarage

2 жыл бұрын

Bought the cable on ebay, got the software on the MES website...

@muriellealamelama1310

2 жыл бұрын

@@arcgarage do you need some extra cables or Just your interface ?

@arcgarage

2 жыл бұрын

@@muriellealamelama1310 It depends what you want to do, if you want all functions you need to buy set of cables

WHAT DEVICE YOU USED? I HAVE VAGKKL

@arcgarage

10 ай бұрын

Multi ecu scan with elm cable

Meni je ključ iznenada prestao raditi, otključao, upalio i vozio jedno 20ak minuta. Izađem iz auta, neće da zaključa na daljinski. Mjenjao baterije ali ništa. Da li je to onda sličan problem kao što si opisao u videu ili bi moglo biti nešto drugo?

@arcgarage

5 ай бұрын

Ne sjecam se sta sam pricao u videu ali odnesi nekom ko popravlja telefone da provjeri konekcije, ako je sve ok ond aga reprogramiraj

@lexo01

5 ай бұрын

@@arcgarage nosio sam i ključ daje signal. Tako da ću odnjeti na reprog. Hvala svakako. Odlični klipovi

@arcgarage

5 ай бұрын

Ma da, onda je to to, hvala

I have gone to a key shop because none of my two keys remote working ... they copy the key in not original key type like mitt the red .. it unlocks locks everything ok but if you hold the lock unlock buttons the windows don’t come down or up .. I told them I don’t want this and I don’t pay for that key .. they told me that they will find OEM147 key then the problem with windows will fix ? What my cause it ?

@arcgarage

3 жыл бұрын

It could be due to the key, but it could also be due to the module which controls the windows...

@ArisAris-ku7np

3 жыл бұрын

@@arcgarage i didn’t had any problem all the years with the windows with remote keys both of them the original

@arcgarage

3 жыл бұрын

Then it's the keys definitely. Did you think about buying the used key and programming it?

@ArisAris-ku7np

3 жыл бұрын

@@arcgarage the shop they told me that they will bring me the OEM 147 key and then program it

@arcgarage

3 жыл бұрын

That's what I did, and the key works perfectly...

Hi, where do you get security code from?

@arcgarage

3 жыл бұрын

Check your owner's manual, if you don't have it, you can get it from dealership...

@david-ivanmusa9684

3 жыл бұрын

@@arcgarage Pricing on one for GT is about 220€. That info is from official dealer when I called them to get one because i did not get mine with car.

@arcgarage

3 жыл бұрын

That's too much, try somebody else. You should be able to get it free of charge...

@sirfailsalot3459

3 жыл бұрын

@@arcgarage Oh I see, how can I get it free of charge or cheap? My 147 didnt come with any books :/

@Easy2take

3 жыл бұрын

Hey kinda late reply, but hope it helps. There actually a seller on ebay that sells you your key code and immobilizer code for around 30$, the only down side is that he just provides you numbers without the key code card so you will have to print them or store otherwise. Seller is called "decodingcode".

What if the remote on the other original key don't work?

@arcgarage

2 жыл бұрын

It could be due to the failure of the internal components, I came upon that issue numerous times...

@RoToRdetailing

2 жыл бұрын

@@arcgarage no i have only a key without remote motherboard, buyed a new key with a motherboard only thing is how to push the remote keys to program the new one if there isn't any on the old one. The lost key had it...

@arcgarage

2 жыл бұрын

@@RoToRdetailing Just do it with new one

da li imas na toj dijagnostici mogucnost gasenja egra ? :D

@arcgarage

Жыл бұрын

Mislim da nema ta opcija, mora na reprogramiranje

Hello. Can you answer me the following question? : I have two remote control keys for the car. The 1st works normally and on the remote control. The 2nd only mechanically, it has lost its remote control. Question IF I PROGRAM THEM WITH MULTIECUSCAN. 1o programs it normally. The 2nd one, however, cannot be programmed for some reason (e.g. because its board is broken) and I close the program, so ONLY the 1st one will be programmed. What will happen with the 2nd key, since it will be cancelled? Will it continue to work as before (i.e. WILL it only put the engine in front, without the remote control?) Or will it not even be able to put the engine in front?

@arcgarage

Жыл бұрын

With 2nd you'll be able to start the car, but won't be able to unlock it. When you fix the board you can reprogram it

@GiannisTz-ce2nm

Жыл бұрын

Thank you very much for the reply I would also like a clarification if you could: (So that I know exactly what I'm doing during programming and that no mistakes are made) So, I program the 1st key that is placed in the ignition to the PPE position. OK. Then I have to remove this key and put the 2nd key in the ignition to do the same programming procedure? And if so, won't the program's communication with the car's brain be interrupted? THANK YOU VERY MUCH

My car came with 2 keys. I lost one. I have bought another of ebay for about 35Euro. When programming with MultiEcuScan it says ensure you have all the keys. Will it expect to see the "lost" key? Or will it simply just program my current working key and new "ebay" key. I hope that makes sense? I have emailed support at MultiEcuScan before I actually try it. They have yet to get back to me after 1 week. Thanks, Sean

@arcgarage

3 жыл бұрын

I don't think it will ask for the lost key. However when you do the procedure you must have all of your keys with you so you can program them. Essentially you will have to program in the existing key again...

@Justin-fc5qv

3 жыл бұрын

Do you receive and reply from MES about this problem?

@Sean-tn5nv

3 жыл бұрын

@@arcgarage Cool. Thats what I suspected will happen. Then IF i found my lost key, it would no longer work and all 3 three would need to be programmed again. Thanks mate

@Sean-tn5nv

3 жыл бұрын

@@Justin-fc5qv No, Ill send them another email. Seems like pretty poor support though.

@arcgarage

3 жыл бұрын

@@Sean-tn5nv You're right, no problem...

Reci mi kako da nađem taj kod što si kucao? Prestao je da mi radi ključ novu bateriju sam stavio.

@arcgarage

Ай бұрын

Kod ovlastenog

@profesormne6174

Ай бұрын

@@arcgarage ništa, napravio sam, izvukao mi iz računara ključar. Da sam imao kod sam bih bez plaćanja odradio ovako trt

If I have one key and the remote control board died, is it possible for me to just get a second hand key and move my sword and trasponder in it and program the remote controls?

@arcgarage

3 жыл бұрын

Yes, that is exactly what I did in the video...

@fusionisgodlike

3 жыл бұрын

@@arcgarage I didn't know it was possible so I guess the 50 euros for the full version is worth it. Thanks do more of these MES tutorials

@arcgarage

3 жыл бұрын

In my opinion it is, no problem, will do...

Te crees importante por hacerlo tu mismo, aver si eres capaz en un 156 fase 1