So thankful for people like AllamHouse that provide these videos. I just started working with M32 edit with our console this week so this and many other youtube videos will be watched for sure.

@AllamHouse

5 ай бұрын

Thanks for the encouragement. Let me know what other questions you might have and I can either point you to other videos or make new ones.

I like to use the android app "mixing station" for wirelessly controlling my x32 at church using my android phone. Best app hands down!

@AllamHouse

Жыл бұрын

I have heard rave reviews about Mixing Station, but never jumped into trying it out. Thanks for sharing with the community.

Thank you @AllamHouse Finally a video with not only talks and interface video but actual showing of cabling and connecting 🥰🥰🥰 #JWBMedia

@AllamHouse

Жыл бұрын

Thanks for the encouragement. Be blessed man

Very much appreciated. Was having trouble connecting them and your detailed instruction solved my issue. Subscribed!

@AllamHouse

Жыл бұрын

Thanks for the encouragement. I'm glad you found some helpful information in this video. Let me know if you have any questions.

Great vide, thank you for sharing!

@AllamHouse

Жыл бұрын

You bet. et me know if you have other questions.

Thank you so much for this information. I just want to make sure I understand. This will allow me to control my console from anywhere right? I’m going to the beach this weekend and I want to be able to help my team if they need me with sound. That’s why I’m asking.

@AllamHouse

Жыл бұрын

I want to make a joke and say that no connections should be made when you are at the beach since life should slow down there. The real answer is that the board will be connected to an internet signal, but you can only control it if you are on the same network that it is connected to which would be in your facility. That being said, I use Zoom a lot to remotely control consoles and the way that works is that you would have Zoom initiated on a computer on the network (in your facility) with X32-Edit running. Then, that computer can issue a screen share on Zoom and you (at the beach) can request remote control through Zoom. This allows you to control X32-Edit on the computer in your facility while you are at the beach and this in turn has you controlling the console... from the beach.

@bertina.wilson

Жыл бұрын

Lol you are right about slowing down since I’ll be at the beach. Thank you so much for your wisdom. This has helped a lot.

Thank you for making this video. I have been using this method for some time but cannot get Solo to work. Any suggestions?

@AllamHouse

Жыл бұрын

I’m assuming you are trying to solo an input channel or a bus. When you press the solo button it will send it to the headphone output on the side of the console (or to the monitor outputs on the back of the console). It will not come to your computer as this interface is strictly for remote control. I hope that helps.

Hey! Great video! This may sound like a dumb question though, but how did you connect from the router to the Mac? Wireless? Bluetooth? RJ45?? Thanks!

@AllamHouse

Жыл бұрын

For this example (and most of my use cases) I am connecting wirelessly just like you would at home for internet. If you want a solid connection or if you are in a large venue you can always connect with a cable to be hardwired just like you do the console.

Great video. Would I be able to use my IPAD while in a different location to connect to the mixer ?

@AllamHouse

5 ай бұрын

If you are connected to the same network you can control the mixer. If you are in a different facility (say at home) you would need to have a computer connected to the network (with X32 edit) on the network and then you remotely control that computer. I do this all the time across Zoom for clients that I am helping get setup. Keep in mind you have to find a solution for hearing the audio in somewhat realtime if you are trying to mix.

Exactly what I am looking for, but I am missing a piece. The RJ-45 on the remote control port is currently connected to a router for wifi control via iPAD. I'd also like to have the X32 EDIT app on the MAC...this MAC (used for streaming) is hardwired to a switch that goes out to the web. If I put a crossover cable from switch to router, will the computer see the X32 or am simply causing an IP conflict that'll crash the network? Say the MAC wasn't used for streaming, is connecting to the wireless router basically my path to have both wireless and hardwired control of the X32?

@AllamHouse

Жыл бұрын

Yeah, you can try going across the switch (in a testing time... not a production time), but I think your IP's will not match up. Your best bet is to connect to the same router as the X32.

Hi hoping you can help. My x32 is not connecting so I'm wondering what settings should be on each of the Setup tabs on the X32: global, config, remote network, etc..

@AllamHouse

4 ай бұрын

What type of network are you running? 192 base or 10 base? The typical is a 192 which is what your IP address would start with, but it is important to know. Shoot me a response and I can try to assist further

Does this apply to the M32 as well? Do I need to go to the Behringer website or the Midas website for the driver?

@AllamHouse

3 ай бұрын

The drivers are all the same and interchangeable. The Midas are might have a slightly different name, but the code and logic is all the same.

Amazing.. Thanks a lot 👍

@AllamHouse

Жыл бұрын

I’m glad you found this helpful, let me know if you have questions.

@just.decide_platforms.

Жыл бұрын

@@AllamHouse thanks In fact, I am searching your wonderful channel for more explanation of the vocal effects and I hope you will explain more about the eq and the comp. And if you have videos that I couldn't find talking about this topic, please send me the links and thank you.

@AllamHouse

Жыл бұрын

This video walks through all of my current vocal settings for pastor, handheld mic, male vocal en female vocal. kzread.info/dash/bejne/d2ms26yRkc_Pfco.html

@just.decide_platforms.

Жыл бұрын

@@AllamHouse Thank you for your high level treatment.

I have a network for the equipment and another network for the users. Between the networks there is a firewall. I need to know which TCP/IP ports should be allowed on the firewall between the Mixer and the mobile application?

@AllamHouse

9 күн бұрын

Hopefully someone will offer some insight. I don't have the network background to offer a good answer to you, but you might also try people on the Behringer X32 facebook groups as they might have more specific info to offer.

@fernandolcoto

5 күн бұрын

@@AllamHouse I've been testing.... but i heard something about ports 10024 and 10023 TCP/UDP

how about usb? the x32 has also a usb port for actual that purpose.

@AllamHouse

Жыл бұрын

The USB cable is an option, but I have not been able to get that to work properly (and consistently) since firmware version 4.02. Also, this video is one that I made to send to clients prior to doing a Zoom session with them and this internet-based version allows me to control their machine across Zoom which offers a great platform for remote education and assistance.

how do I use the x32 to edit my live stream where it does not affect the in house?

@AllamHouse

Жыл бұрын

I tend to use a Post-Fader MixBUS pair to manage my livestream. This video here talks about building your mix in X32-edit in this setup. kzread.info/dash/bejne/m39nyc1rot3Al9Y.html

COOL i am french so my english ....... but what about the usb remote control on x32 ? because i have configure the console with ethernet but i am unable with usb !! why ???

@AllamHouse

Жыл бұрын

Thank you for asking this question. I used to use this feature a lot when I was on firmware 4.02, but it has been a while since i have needed it. I went to reply to this comment and realized it is not working properly for me either. I have sent in a support ticket to Behringer in hopes to get some guidance. When I do I will make a video out of it in hopes to help you and others.

@sergeegea7448

Жыл бұрын

@@AllamHouse Yes! Allam i have wrote to behringer to, but if people ride the questions , behringer never answer .... sorry for my english

Why would you want to copy the mixer to the computer? I spent 4 hours writing a scene on my Mac, and now I want to transfer these settings to the board.

@AllamHouse

8 ай бұрын

You are in luck, the software offers both directions. Many people are connecting to an existing scene on their console so they choose to go from "Mixer > PC". Other times people do what you have done and that is pre-build a scene and then you want to load it to your console and for that you can choose the "PC > Mixer" option.

@ReverbAndBeer

8 ай бұрын

@@AllamHouse I tried to transfer a complete show to my M32R last night, just before rehearsal, via USB thumb drive, and it wiped out my output routing (I have a DL30 also). The MD/keyboard player started screaming at me "Why is the kick drum in my monitor?!" I had to re-do it manually. I'm going to try to transfer it by wifi this afternoon - Macbook Airs don't have ethernet connections - and figure out how to account for the stage box. I'm sure I'll get it eventually. Thanks!

Just tried to download X32-Edit to my Macbook Pro. I'm getting an error message stating that Apple cannot check the software for malicious software and will not open the software. Any suggestions?

@AllamHouse

Жыл бұрын

You have to bypass that and move forward. It's the same for many applications you might end up downloading across the life of the device.

@RevJorgeDiaz

Жыл бұрын

@@AllamHouse It’s weird but what ended up working was doing a right click on the app, clicking open and the app fired up. Thanks for the prompt response!

@AllamHouse

Жыл бұрын

I'm glad you found a solution.

Hi... Do you have any idea or experience working with f8 or f8n zoom recorder?

@AllamHouse

Жыл бұрын

This is a copy reply from the same question on another video. I have used some of the more handheld Zoom recorders for field audio capture and podcasting, but never the F8. I'm sure the controls are similar, just more of them, but I have not used this unit specifically.

@just.decide_platforms.

Жыл бұрын

@@AllamHouse sorry but i think I have a bad internet connection issue..... But my question is i need to get the performance sound on stage from the analog mixer to my f8 zoom recorder and take it out to the cameras so how i can do that?

@AllamHouse

Жыл бұрын

After doing some basic research on the F8 Zoom it seems like you need to send audio to your analog console to build a mix for your house. Then use a Stereo BUS Pair to build a livestream mix and send that mix to your Zoom F8. You now have the option to record that mix onto SD card or send an output from this to a camera or other streaming device. In the end you need to determine what each piece of gear can do for you and then decide the best method of how to build your system.

@just.decide_platforms.

Жыл бұрын

@@AllamHouse so i think the idea here that i can blog sennheiser receiver sub out from f8 and pair it with 3 transmitter to send it to the cameras after i do what you tell me to do it

@AllamHouse

Жыл бұрын

Did you get everything working?

I need your help

@AllamHouse

Жыл бұрын

I[m happy to assist. If you need direct help, please fill out the contact card on my website and we can begin a conversation outside of KZread. sound.allamhouse.com

Any one with insights about connecting from a remote site? lets say another end of town

@AllamHouse

Жыл бұрын

I do this with Zoom all the time. You would start a Zoom session on your machine and a machine on the same network as the X32 that is running X32-edit. Then do a remote control across Zoom so that you are controlling the computer at your venue and now you can mess with X32-edit which is in turn connected to the console. You won’t be able to hear the audio, but for setup or changes (or troubleshooting) this tends to be the most efficient way to do this.

video seems not to run .-(

@AllamHouse

Жыл бұрын

I’m not sure what you mean by this. It’s hosted on KZread so it would most likely be a connection, cache, or other device error.

Thank you for all your videos @AllamHouse! This video was almost what I need. We currently control our Behringer x32's stream mix using the X-32Mix app (iPad in sound-proof room) over a wireless network. This usually works fine, but once it a while, we get some interference and the connection drops/reconnects, then drops/reconnects, and then later dops/reconnects. It hasn't done this in a couple of months, but I'm just waiting for it to happen again. I'd like to have the option to switch from the wifi to a hard wire when this occurs. I've seen one video kzread.info/dash/bejne/lK6e0pKnfcy_lqw.html&ab_channel=producerguy talking about it... but there are some details missing and so I don't have it working yet. Of interest to me would be the exact model of Network to lightning converter. Have you ever tried a hard wire connection?

@AllamHouse

Жыл бұрын

So, you are really just planning to run a Cat5 internet cable from the router, into your rom for your iPad to connect to instead of wireless. Just determine if you have a 30-pin (old iPad charging), lightning, or USB-C connector on your iPad. Then grab the needed plug that allows for an internet connector. I recommend getting one that offers an additional lightning input so you can charge the iPad while using the internet connection. The official term for the internet plug is RJ45 so that might help in your searching. Most things you find on Amazon will work just fine for your needs.

@glennrussell2484

Жыл бұрын

@@AllamHouse Hi David. Yup! You've got the right idea. That said, my first attempt at this didn't work... the app simply didn't connect to the board once I turned off the wifi. The other video I referenced hinted at a possibility: He said that he had to try a couple of adapters because one or two of them that he tried didn't work for some reason. I've got 2 more RJ45->Lightning adapters on order... and you're correct: One that offers charging as well is preferable. I'll let you know if one of them works and post a link here in case it's a help to others. Thanks!

@AllamHouse

Жыл бұрын

Keep me and the community in the loop as it is a good tool to have and a relatively small part to invest in once the best one is identified.

@TheHarborChurchRI

Жыл бұрын

​@@AllamHouse Finally got it working today! Anyway, here is the scoop: The first thing you should notice is that when you plug in the network to lightning adapter, you should see a new "Ethernet" setting appear under your "WiFi" settings on the iPad. This may sound obvious, but I'm not an Apple guy... and, for me, that actually didn't happen at first anyway, because the adapter I really wanted to use, didn't work at all... more on that later. Anyway, once that setting appeared, I simply copied all the settings for the wifi (things like IPAddress, subnet, etc) in the new ethernet area. That should be basically all you need to do. The only other oddity is I was originally trying to plug the iPad's network cable into the Unifi Router, and also had the x32 plugged into the same router. For some reason, I never did get that working. But, that was only a temporary step in order to simply/diagnose the setup. Once I plugged the iPad network cable into the switch, and then the switch wire to the router, and the x32 network wire to the router, that worked just fine... and that's really the way I wanted it wired anyway. Anyway, this is the powered adapter that finally worked for me: smile.amazon.com/gp/product/B091923NWM/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 This one worked too, but it is not powered: smile.amazon.com/gp/product/B07XCT9P4M/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 This powered one did not work. No idea why. But, even once I had a working system, I twice tried to switch back to this unit (because it's the one that I probably would have chosen as my favorite/optimal adapter), and it did not work. smile.amazon.com/gp/product/B099K2B2YJ/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 Hopefully this will help someone else. Thanks for listening!

Hey allam I need to talk to you

@AllamHouse

3 ай бұрын

I'm happy to work with you. The best thing to do is go to my website and fill out the contact card on my website. sound.allamhouse.com