Cleaning and reloading supplies instructions for a GK420d Zebra printer
Жүктеу.....
Пікірлер: 21
@Alihassan4504 жыл бұрын
excellent video, thank you
@philipwaters
2 жыл бұрын
Your very welcome
@tyhayward615910 ай бұрын
thank you!
@ashrafirimbiliyam91485 ай бұрын
Thanks bro.....❤
@kgosivanwyk75356 ай бұрын
Big help
@imamanc4life3 жыл бұрын
very useful thanks
@philipwaters
2 жыл бұрын
Your welcome
@chessguru9002 жыл бұрын
MY Zebra GK420 is flashing red slowly. The media is loaded and the lid is fully closed but still keep blinking red. Any ideas?
@philipwaters
2 жыл бұрын
Have you checked for loose sticky labels blocking the label sensor? Might need to raise a trouble ticket with Zebra?
@chessguru900
2 жыл бұрын
those are too basic. thanks anyhow
@Juan_Gaite2 жыл бұрын
Hi dude, my zebra keep printing the tickets clean, no write anything , idk why, i just do the normal configuration, but just have white tickets , she is not writing, any idea? its new Thanks
@philipwaters
2 жыл бұрын
There could be a number of reasons for this problem, from the simple fix (is there a loose label stuck to the thermal print head) to rather difficult requiring zebra customer support for a faulty print head. Sorry I can't be more helpful.
@wookieefer4468 Жыл бұрын
Hello sir, maybe you know if this printer supports 1 inch width labels? I wish to print 1/2" x 1" Thanks for the info...
@nathanmohler1631
Жыл бұрын
i have the same question. did you figure it out?
@wookieefer4468
Жыл бұрын
@@nathanmohler1631 I took the risk and bought the GK420T which prints on direct thermal and thermal transfer as well, and yes. The 1" labels do fit without any problem.
@philipwaters
11 ай бұрын
There is plenty of space for wide labels. Though this video was taken some years ago there may be better more modern label printers on the market by now.
@goalessio2 жыл бұрын
How to use with iPad?
@philipwaters
2 жыл бұрын
No idea sorry, I am a pc user. There may be a driver available or think about a wireless/USB compatible label printer?
@rosyappachan4217 Жыл бұрын
Hi The printing is intermittently coming. One is printing and the next is not printing. So there is wastage of too many barcodes
@philipwaters
Жыл бұрын
Have you tried thoroughly cleaning the print head (I use an IPA swab) also you could perform a printer recalibration and reset. Other than these few things it will need servicing by Zebra.
Пікірлер: 21
excellent video, thank you
@philipwaters
2 жыл бұрын
Your very welcome
thank you!
Thanks bro.....❤
Big help
very useful thanks
@philipwaters
2 жыл бұрын
Your welcome
MY Zebra GK420 is flashing red slowly. The media is loaded and the lid is fully closed but still keep blinking red. Any ideas?
@philipwaters
2 жыл бұрын
Have you checked for loose sticky labels blocking the label sensor? Might need to raise a trouble ticket with Zebra?
@chessguru900
2 жыл бұрын
those are too basic. thanks anyhow
Hi dude, my zebra keep printing the tickets clean, no write anything , idk why, i just do the normal configuration, but just have white tickets , she is not writing, any idea? its new Thanks
@philipwaters
2 жыл бұрын
There could be a number of reasons for this problem, from the simple fix (is there a loose label stuck to the thermal print head) to rather difficult requiring zebra customer support for a faulty print head. Sorry I can't be more helpful.
Hello sir, maybe you know if this printer supports 1 inch width labels? I wish to print 1/2" x 1" Thanks for the info...
@nathanmohler1631
Жыл бұрын
i have the same question. did you figure it out?
@wookieefer4468
Жыл бұрын
@@nathanmohler1631 I took the risk and bought the GK420T which prints on direct thermal and thermal transfer as well, and yes. The 1" labels do fit without any problem.
@philipwaters
11 ай бұрын
There is plenty of space for wide labels. Though this video was taken some years ago there may be better more modern label printers on the market by now.
How to use with iPad?
@philipwaters
2 жыл бұрын
No idea sorry, I am a pc user. There may be a driver available or think about a wireless/USB compatible label printer?
Hi The printing is intermittently coming. One is printing and the next is not printing. So there is wastage of too many barcodes
@philipwaters
Жыл бұрын
Have you tried thoroughly cleaning the print head (I use an IPA swab) also you could perform a printer recalibration and reset. Other than these few things it will need servicing by Zebra.
@rosyappachan4217
Жыл бұрын
@@philipwaters thq