View 60,000!

@jiujitsu2000

7 жыл бұрын

Quirkification Thank you!

@NotSoDumb

4 жыл бұрын

Question for you; I tumbled, dacapped and resized a bunch of 38 special cases. More than half of them won't fit in my case length gauge, they were belled at the bottom of the case. Should I toss them? Thanks.

@seamansj

3 жыл бұрын

I don’t know if you will see this or not because this was made so long ago but thank you so much for this. I am just getting into reloading, yes a bad time to just be starting, but this goes into so much detail and you explained each step and how to do it. Thanks again.

This is the "training video" I used as a development tool to begin loading my own 38 Special and .357 Magnum rounds. The practices in this video apply to all calibers. I can't thank you enough for instilling the confidence that I needed to undertake this hobby. Thanks!!!

The strength of this video is the attention to detail that is provided for each step of the process. I've seen videos that skip over the detail. For example, the video shows every step in properly setting up the bullet seating die with crimping. Check the powder loads (measure and visual check). Nicely done. Thank you.

@jiujitsu2000

8 жыл бұрын

Thank you!

I'd like to complement you on your clear explanation and on your articulation. Everything was easy to understand. I am also a reloader. As they say, there are more than a couple of ways to skin a goat sized cat. If we're not learning, we're waisting time. Thank you for taking your precious time to make this video.

@jiujitsu2000

2 ай бұрын

Thank you so much!!

Sweet! I'm flattered! Reloading is such a great hobby and the payoff is great! Always safety first. Thank you for the kind words. Have a good night! :)

This is by far the most comprehensive and clear video I've seen on the subject. I'm just waiting for my dies to arrive and then I'll be ready to reload.

Just getting back into reloading and stumbled across your videos. Thanks for your patient instruction - very helpful and a SAFE, easy way to get going in this great hobby!

@jiujitsu2000

8 жыл бұрын

thank you! feel free to check out my channel. I have many great videos!!

I have been reloading shotshells for over 30 years and I've had all the equipment for reloading with a press for a year now. So after watching your video I figured it's time to try it. I also went to RCBS youtube site for set up on my press. But I wrote down step by step, every thing you said and how to adjust the dies. 100 successful .38 specials to spec without any problems. Thank You Very Much

I think you reloading series is by far the best out there. Attention to detail and never skip a thing. Super helpful and I think your videos are reloaders best learning sources.

I love your long video's... Very detailed, very informative, overall 1st class content... Your demeanor is excellent.. Anytime I want to learn and watch hand loading video's I watch yours.. Thank You for your time and really Great video's. God Bless.

Thank you for the kind words and supporting my channel! Good luck and double check your load data. Have a good day! :)

Best tutorial on .38 that I have seen on the web Well Done in terms of the detail given for each step!

Finally a good detailed reloading video, thanks brother!

I saw this video you made and I must say. You have given a great many steps that are needed to understand why you must do certain steps, where and when to check these steps and issues that may arise while loading ammo. I understand more now than I ever have before about loading rounds. Thanks for the video. Great for beginners who want to start loading their own ammo.

@jiujitsu2000

8 жыл бұрын

thank you so much for the very kind words and support you give my channel. heads up, I'm having a 30k giveaway coming soon!!

Thank you for the kind words and for supporting my channel. I have many more great video's in the works! Have a good evening. :)

I absolutely love your reloading videos. I have watched dozens of others and yours are by far the best instructional videos on youtube. Clear, concise and everything makes perfect sense. Thank you.

@jiujitsu2000

4 жыл бұрын

Thank you! There will be more to come!

Thanks for putting this together. It's the first time I've ever watched reloading and you've taken away the fears I had about it being arduous and complicated. I like your patient method of checking as you go. I'll be shooting more and spending less soon.

Really enjoy your videos. Started reloading very recently so I am soaking up as much info as I can. I especially appreciate you mentioning to “prime your brass after neck expansion” to keep primers from being pushed back out slightly due to pressure while expanding. Great stuff!

Very comprehensive. Easy to follow. Appreciate your insights as to some of the reasons behind your practices. Thanks

100% worth anyone's time to watch this video for novice or experienced shooters. You got a new subscriber 😎

Oh wow, how cool. Great video, never thought about reloading but after watching your video I think I want to start.

Best reloading video I've seen. Enjoyed watching it!

this was presented as good as i have seen. thanks.

A very well presented video. I enjoyed the step by step instructions. Keep up the good work.

Excellent this has helped me a lot as I’m getting back into shooting and reloading as I used to in the early 90s, thanks a lot.

Thank you! I'm glad you liked it. I appreciate your comment and the support to my channel. Have a great evening! :)

Well Got brass in so dug in loading some .38 and 357 magnum using your video's. Outstanding.....with my laptop in the shop I'm able to watch, pause, re-watch steps I have question to. Love it...now I'm ready to load the 100 bullets I won in your contest!

You helped me immensely when I started out a few years ago..much appreciated

Excellent video. Will be referring back to it when I start reloading in a few months.

Thank you! YOU'RE WELCOME my friend! It's my pleasure. I love trying to share what I know. Have a great evening! Feel free to subscribe if you haven't already, I have many more irons in the fire. :)

This is a great video showing the whole setup and steps to take. Thanks I have referred to it several times as I am a bit of a novice at it1

Great video. I really appreciated how thorough and unhurried you were in performing and explaining the process. I am researching reloading techniques and equipment as I get ready to get my first press. The only things that I was left wondering at the end, again because you had taught so much and thoroughly, was why the cases got longer (need trimming) and if/how you cleaned your brass. Fantastic job. Thank you!

excellent video, easy to pick up and put down as needed per reloading. awesome job and thank you!

That was phenomenal! THANKYOU for the detailed protocol. Jeff

I appreciate you taking the time to tell me you appreciate my work! Many people don't do that. I have many more good video's coming! Have a good evening! :)

Thank you! I have many more video's of good content coming. Feel free to subscribe if you haven't already. I appreciate the support! Have a great day! :)

Great video. I think you make the best loading videos with excellent explanations. I have watched them a number of times and always pickup another tidbit of info each time I watch. 👍👍👍👍

Great Video, Thank You, I really like how you explain and show everything in your video. You have a gift for teaching.

You are a natural teacher. Very well done, thank you.

Excellent tutorial sir - love the way you place quality over quantity!

Like your press set up and work area, I'm cramped for space, appreciate the mounting etc. Thanks again.

Excellent detail in a 38 minute video! Well done!

Thank you! I appreciate the support as well as the kind words. Have a great day! :)

Thank you for taking the time to make this video. Just getting into reloading and this is a great video.

This was very demonstrating and fun to watch! One of the best tutorials I've ever seen, very helpful for me. Thank You! :)

Man, thank you soooo much for taking your time and being thorough. Great stuff here!

@jiujitsu2000

8 жыл бұрын

+SQTierHog You got it brotha! Thank you as well!

Thank you for the support and kind words. Have a great evening! :)

Sweet! Thank you for the kind words and the support you give my channel. Have a good day! :)

Wow! You're exactly right. I didn't even notice that... Maybe I'll re-name it .38 special in 38 minutes. Ha ha... Thanks for the comment and supporting my channel. I hope you found some useful info, Have a great night. :)

Thank you. You are greatly appreciated. I have learned a lot from your videos.

Hi JIUJITSU2000, Had to reload some38 special for a friend and had to watch and listen to your video and voice to make sure I did good, my first time on 38 Special. :) Thanks

WoW! You've taken the mystery out of reloading for me. When I was a kid, my uncle would reload his different caliber bullets. He would even melt the lead and pour the bullets. I knew he did it but never actually watched him do it. I've been thinking about it myself and always thought it was extremely difficult and dangerous. Now I understand the process and it's not so scary. LoL But like you showed and someone else mentioned in a comment, it's all in the details, paying attention to what you're doing and taking your time doing it. It looks almost therapeutic and relaxing. Thanks for sharing and explaining the process in very simple language. Great video 👍🤠

Very clear and precise instruction. Thank you. 👍🏼

great videos! these are definitely some of the best reloading tutorials. cant wait to start reloading

@jiujitsu2000

8 жыл бұрын

+fantastico Thank you for the kind words and support you give my channel! Have a beautiful day!!

You are the best teacher on KZread!! I just came back and watched for the first time in about 3 or 4 years. Got away from reloading and just came back. Watched many videos on other topics but you are the best!! Also a great teacher is Mike Beliveau whose specialty is Blackpower and history. You two are similar in talent. Bless you! (I know Mike personally here in PA)

@jiujitsu2000

2 жыл бұрын

Thank you so much for the very kind words and support that you give my channel. Much appreciated and those types of comments give me the motivation to do more things like this. Blessings

Nice step by step video. Good work. Thanks for taking the time.

@jiujitsu2000

8 жыл бұрын

+Boris Scott thank you!

Thank you very much for this very well presented and informative video. I am at the point where I will start reloading and learned a whole lot from this video..

Another great reloading video, keep it up I love watching them!

Thank you. Very well done video. Will be reloading my own rounds soon. 😊

Thanks for this excellent video and taking the time to explain it in detail, it has really helped me a lot!

@jiujitsu2000

8 жыл бұрын

+William Bryant Thank you for stopping by!

It cannot be more clear! A super instruction! Many thanks!

Thank you for the kind words and also for the support to my channel! Have a beautiful day! :)

Last pistol cartridge (for now) I will be reloading. Thanks for the detail instruction like always.

Thank you so much! I'll keep them coming... Have a great evening! :)

As always very informative. Thanks a ton for the upload!

@jiujitsu2000

8 жыл бұрын

thank you!

Thanks for the lesson. I haven't started loading yet and had many question. Thanks again.

Most straight forward reloading video i've seen so far. You speak well like a good teacher. I will be starting reloading very soon.

@wkeil1981

10 жыл бұрын

Speak well, he doesnt know when to say well or when to say good.

@jiujitsu2000

9 жыл бұрын

Thank you

Awesome! Thank you for the kind words! Enjoy! Have a great day! :)

Super informative and very detailed I'm ready to tackle reloading on my single stage Press. Keep posting those videos you did a great job..

@jiujitsu2000

9 жыл бұрын

Thank you for the kind words and support that you give my channel have a beautiful day!

Very thorough explanation. Awesome work, probably going to begin reloading soon here.

@jiujitsu2000

8 жыл бұрын

thank you for the kind words and support you give my channel! have a beautiful day!

You are the best! Thanks from Germany!!

Thank you for the kind words. I love the .38 special as well. I have another neat video that I just put together with this round. I think 4.2 grains of Unique would be a great load! I love my RL550b. It just works. Getting it was a great choice. Sometimes when I'm in a reloading mood I still use the single stage. I do this to really enjoy the whole reloading experience. Thanks for your support to my channel and I enjoyed reading your comment. Have a great day! :)

ein großartiges Video und eine wunderbar detaillierte Beschreibung der einzelnen Bearbeitungsschritte... es hat mir unsagbar viel geholfen. vielen Dank dafür

glad i found your channel. love the .38S. rd. thank you.

@jiujitsu2000

8 жыл бұрын

+MegaBait56 Thank you for stopping by!

Great video. Excellent. I have 3,000 .38 special shells sitting here, and I've been thinking about getting into reloading. My biggest concern, though, is safety, which you address all through this vid. Thanks to you, I now understand the basic process of a single stage press. Thanks!!

You keep saying "not that big of a deal", but its that attention to detail that makes sure you wont blow off a finger :). Great vid.

@jiujitsu2000

8 жыл бұрын

you're 100% right about that! thank you for the kind words and support you give my channel. have a great evening! Merry Christmas!!

As always, great video. Thanks!

Loved the video. Thank you so much for taking the time to set this video up. :)

@jiujitsu2000

8 жыл бұрын

+Jim Bailey Sweet! thank you for stopping by! :-)

Excellent video. Thanks for spending time in details.

@jiujitsu2000

9 жыл бұрын

Awesome! Thanks!

Very clear and concise info. Step by step for guys like me who are starting out in reloading. Aloha and mahalo!

@jiujitsu2000

6 жыл бұрын

+Maui Glide aloha! Thank you!

Thank you for the kind words and support to my channel. I like going to the junkyard. Old car batteries have lead inside. Old cars have wheel weights. Tire shops sometimes sell them to me, but it seems like its getting harder to get them there because many are recycling these days and already have someone coming to get them. Some dental offices have the film backings from X-rays which are pure lead. Old diving weights. Thrift stores or Goodwill. I hope this was helpful. Have a good day! :)

Best reloading video I've seen. Thanks

Nice video, very clear and concise.

Awesome video just the right level of detail appreciate it man

Excellent walk through for a novice like me. Thanks .👍

Hi Jiujitsu2000, just a quick comment on this video and in general. I'm getting into reloading now myself (heck, who ISN'T with the price of ammo in these pandemic times), and this is one of if not the best all-around video that I've seen that describes the process from start to finish. Job well done, my friend. Now, in general, I've been subscribed to your channel for a while and find that you do a great job with your videos--keep up the good work. Now, off to go reload some .38 special...

Very well done tutorial. Thank you for taking the time to share your knowledge, it's really appreciated.

@jiujitsu2000

7 жыл бұрын

Thank you!

@NotSoDumb

7 жыл бұрын

You are very welcome.

Very basic, but very well explained. Good job!

SUPER, SUPER helpful! 👍🏻 I just inherited a reloading set from my father who just recently past, but I wasn’t clear on how to use it.

Thanks for the support to my channel. I think using a swager to uniform primer pockets is a great idea! Have a good day! :)

Very good job I am just starting to reload 38 thank you for the video well made

I usually trim every other load. Some brass and calibers stretch more than others so it's a good habit to measure them. Thanks and have a good day! :)

Thx again for making the videos. Very helpful.

@jiujitsu2000

6 жыл бұрын

JON Gergeceff Thank you!

Very helpful indeed - Thankful for many things including your channel sir! .223 is my handloading focus but 38 special will be my first for pistol handloading - my 586 can hardly wait :D

Great vid. Thorough and detailed. Thx.

Great demonstration!

Really good. I'll start reloading .38 special this weekend.

Ah. My favorite round to reload and shoot. Such a forgiving round to learn from and accurate too as well as versatile!! Enjoyed the vid. I also shot 4.2grs of Unique under a lead SWC with a firm crimp. Used a Dillon AT500 upgraded to RL550 and RCBS little dandy powder measure with the steel rotors that were cut to certain volume. The little dandy threaded on top of the Dillon tool head. I would reload the nickle plated brass until all the nickle was worn off and still had case life left.

Thank you jiujitsu for another great video. I also subscribed today! I like how you post long through reloading videos. I was wondering if you have done any reloading videos of in depth accurate rifle rounds. I apologize if you have already made a video but I have just subscribed and I don't know what videos you have made yet. If you have not I would like to request if possible for you to do a video over reloading extremely accurate rifle ammo. Maybe even just a video of you discussing the best dies, equipment, and presses that would be used for accurate rifle ammo for shooting out to 1000 yards.

Excellent video!