Refrigerator Water Line Installation
Тәжірибелік нұсқаулар және стиль
In my opinion, this episode provides you the best approach for installing a water line for your refrigerator and ice maker by using a Shark Bite Water Line Tee in lieu of a standard or tradition water line fitting.
The episode covers the following key items:
• Disadvantages of traditional saddle shut off valve water line connectors that are prone to leaking and distorting the copper pipes they are attached to.
• Advantages of Shark Bite Fittings. This is the link to the Shark Bite Fitting, which I mentioned in the video:
Shark Bite ½” x ½” x ¼” Tee Link:
amzn.to/3ra4De4
• Measuring and determining the depth of the adjoining copper line insertion into the Shark Bite Fitting and determining the amount of copper line to cut out of the copper water line to accommodate the Shark Bite.
• Marking and cutting your home’s water line for the installation.
• Installing the Shark Bite Fitting.
• Turning on the water and testing the Shark Bite for leaks.
• Connecting a ¼ copper line to the refrigerator and the Shark Bite Fitting.
• Turning on the water and testing the refrigerator and Shark Bite connections for leaks.
• Checking the refrigerator’s water and ice dispensers to ensure they work.
Пікірлер: 21
Thank you for this video. I was told I had to disconnect my waterline prior to getting new flooring because they would move the fridge but not disconnect the waterline. I was able to shut the water off and with your video I was able to figure out how these Lines came apart. Thank you so much. 59 yo mother of six, GMA of four.
@LetsFixItRight
17 күн бұрын
Glad I could help! Janet, Thank you so much for your laudatory comments. It's great to know that my video helped you with your water line. Otherwise, I appreciate your interest in my channel. I retired recently and have plans for another 200 to 300 great videos. Can you please subscribe and tell your friends and family about my channel also? This a link to my channel: www.youtube.com/@LetsFixItRight Regards, Al Bacon Let’s Fix It Right
Good Video....thanks. I see you have the very same Whirlpool refrigerator that we have.
@LetsFixItRight
7 күн бұрын
Larry & Margaret Smith, Glad to hear that you liked my video and I appreciate your interest in my channel. I retired recently and have plans for another 200 to 300 great videos. Can you please subscribe and tell your friends and family about my channel also? This a link to my channel: www.youtube.com/@LetsFixItRight Regards, Al Bacon Let’s Fix It Right
This was great, directed as if I was there with you. Loved it, keep up the great work!
@LetsFixItRight
3 жыл бұрын
Jacob, Glad you liked my video and I appreciate your interest in my “Let’s Fix It Right” channel. By the way, I retired recently and have plans for another 200 to 300 great DIY videos. Can you please subscribe and tell your friends and family about my channel? This a link to my channel’s videos: kzread.info/dron/IBvBqPEkqu3D5HLpxlEmEA.htmlvideos
@hdwblade
3 жыл бұрын
@@LetsFixItRight sure did!
This helped me a lot, thank you
@LetsFixItRight
2 жыл бұрын
John, Glad you liked my video and I appreciate your interest in my channel. I retired recently and have plans for another 200 to 300 great videos. Can you please subscribe and tell your friends and family about my channel? This a link to my channel: kzread.info Regards, Lets Fix It Right
Very good description of procedure, but Id like some close up shots of some details
@LetsFixItRight
7 ай бұрын
BradiKal61, I have approximately 20 jpg pictures I can send you. My email address is: abacon73@aol.com. If you send me your email address, I'll send you these pictures. Otherwise, I appreciate your interest in my channel. I retired recently and have plans for another 200 to 300 great videos. Can you please subscribe and tell your friends and family about my channel also? This a link to my channel: www.youtube.com/@LetsFixItRight Regards, Al Bacon Let’s Fix It Right
You really need to clean the pipe before using a push-to-fit connector. Get some emery cloth and clean it up before you cut out the damaged section. You should also deburr the edges before seating it into the connector. Not doing so can damage the o-rings inside the sharkbite, potentially causing a leak.
@LetsFixItRight
Жыл бұрын
KS, I did clean (sand) the pipe with emery cloth on both sides of the cut prior to installing the Shark Bite Fitting. I should have mentioned this. While viewing the film if you look closely, you can see where I did this on the 1/2 inch copper line both sides of my Shark Bite. Nonetheless, this is a good point on your part. Thank you for mentioning this so folks will not forget to do this. Let's Fix It Right
Good job mate
@LetsFixItRight
3 жыл бұрын
Berhad, Glad you liked this "Refrigerator Water Line" video. I appreciate you taking time to make this valuable comment and welcome your interest in my “Let’s Fix It Right” channel. In addition, my channel has several other useful videos to facilitate your DIY efforts. I also retired recently and have plans for another 200 to 300 great episodes. With that said, can you please subscribe to my channel, tell your friends and family about it, and send them this a link to my channel’s helpful videos: kzread.info/dron/IBvBqPEkqu3D5HLpxlEmEA.htmlvideos Regards, Let’s Fix It Right
@iBerhad
3 жыл бұрын
Mate, you do absolutely fantastic job and then keep up the good work
@iBerhad
3 жыл бұрын
Done subscribed
@LetsFixItRight
3 жыл бұрын
@@iBerhad Berhad, Glad to have you aboard the "Lets Fix It Right Channel". Several other great videos are in the works.
@paullackenbauer7316
Жыл бұрын
Why did you install the shutoff under the floor. Why not put in a wall mounted shutoff. Similar to the type used for washing machines.
Good stuf
@LetsFixItRight
Жыл бұрын
Stephen, Glad to hear that you liked my video and I appreciate your interest in my channel. I retired recently and have plans for another 200 to 300 great videos. Can you please subscribe and tell your friends and family about my channel also? This a link to my channel: www.youtube.com/@LetsFixItRight Regards, Al Bacon Let’s Fix It Right