Nice video, I think you were referring to ours being whisper quite with heat sink lol. You said holmes is whisper quite, and didnt try ours to see if it made noise haha, all good. I'm glad videos like this are made, shows we don't inflate our numbers and do our best to provide a fantastic product for our fellow RC enthusiasts! Have fun everyone! P.S. In stock : )

@RCReviewChannel

4 жыл бұрын

That is correct. Much appreciated Reef!!!!

@rustler08

3 жыл бұрын

@@themountain59 They are underrated based on testing, so I guess the only joke is you. :D

@wpkg

3 жыл бұрын

@@themountain59 why are you throwing so much shade at Reefs? did one of their servos run over your dog?

@toksta79

3 жыл бұрын

Paul Grossman because when the reefs 555 first released, it had issues with the gears being too soft. An update was made but some people had to buy new gear sets.

@wpkg

3 жыл бұрын

@@toksta79 yeah... but he’s complaining like it’s his job

Love the servo testing! You really should get some Agf servos, those really are the beans!☝🏽👌🏽

Really like this comparison. Getting ready to buy one in the next few days. Thanks.

Thanks for all the servo testing, great information 👍. I did just get a 555 for my TRX4 sport. Please note that a little filing is needed to fit. The performance is unbelievable to me! Thank you!!!

Just got my SHV500v3 and now you're making me doubt myself.

Noise competition with Savox! Woot!

You've gotta try a tug a war between the 2 servos....

Love your reviews. I always learn a lot from you. Can you review and compare the reefs 777. Specific application is a beefed up xmaxx. Thanks

I'd like to see how the ShiftRCS X2 stacks up!

Great content as always!! Next servo test please include Reefs Raw 500

wonder what the Holmes would do at 4s (16.8v)

How about a test with the Holms v3 and reefs 777 and other top end servoer?

I think the raw500 would've been a better competitor

You need a Reefs Triple7. I ended up getting one. It’s whisper quiet and crazy powerful and fast

@RCReviewChannel

4 жыл бұрын

Good to know.

@leereed219

4 жыл бұрын

Aka the rs800

@jonthomas8487

4 жыл бұрын

andy R. More expensive than I paid for the Reefs version with a coupon at AMain with free shipping and I get US Based support too

@jonthomas8487

4 жыл бұрын

andy R. I’ve already experienced it first hand and Reefs is wonderful

I have a traxxas Land Rover defender all stock? If I go with the Reefs 555? Do I need any additional upgrades? Thanks for anyone who responds to this message.

Just bought V3 and not tested yet, but only down side this time is its noise and height. Should inch up the servo to use in Shafty or MoA. I have two T4 and one T5, they are good in truggy or scale crawler.

Nice vid like always. I have a 555 and love it. Checked reefs site and it says rated at 555 oz in at 7.4v. I know u tested it at 8.4v is it safe to run it at that voltage?

@RCReviewChannel

4 жыл бұрын

Yes, as far as we know. Ran it this way for 6 months with a Castle BEC.

@toddn.3123

4 жыл бұрын

@@RCReviewChannelAmain says "Do not power over 7.4V"

Why does it state on Amain site that the reefs triple 5 is not to be powered over 7.4 volts but your using 8.4 volts?

Have you considered any of the bluebird servos to test? They’ve got an impressive lineup. I just put a BLS-3006 into my rock Rey, the thing is absurdly quick! My buggy handles like never before. Their BLS-H51b might give even that 777 a run for its money. I just found out about bluebird not long ago but have been impressed for performance vs price. I’d be interested to see how their servos actually stack up on the bench.

@Fats-yg1jd

2 жыл бұрын

Oh yeah those are fast

I'd take the holmes any day

What recievers are you guys running that handle 8.4v? Esc is the easy part. Can't fry the reciever. I run futaba buts it's only good to 7.4v.

@RCReviewChannel

4 жыл бұрын

flysky and radiolink

@discusdog

3 жыл бұрын

Or use a bec to power just the servo with a bypass harness

@bazzani21

3 жыл бұрын

@@discusdog I hate bec. Just more crap to clutter. Especially in my bomber. Appreciate the idea

Even the BEC of Hobbywing 1080 is likely to expect high torque with Reefs555.

@leereed219

4 жыл бұрын

The 1080 does 4.5 amps, more than enough for a reefs

@jonthomas8487

4 жыл бұрын

I run my Raw500 on the internal BEC on my HW1080 at 7.4v. I ran that setup with my heavy TRX4 Sport without any brown outs or weakening and now that combo is in my Element (TRX4 now has a Triple7). External BEC’s aren’t needed with the 1080 unless maybe you are running a lot of lights and shifting under load on a regular shiftable TRX4.

my confusion lies in the receiver ....my mamba x will put out 8.4 volts but most receivers only allow 6v and i did burn a radiolink receiver up once by over stressing a servo which was my fault but still seems like a lot of amp load on those lil things....liked as always brother

@RCReviewChannel

3 жыл бұрын

Most of these flysky and radiolink receivers can handle 8.4v no problem

@paulclancy2404

3 жыл бұрын

Yo shadetree read my comment above you lmao 🤣 I almost brought you up with your 777 servo , crawlers are cool people but I get kick how cheap and frugal they can be , oh and stop thinking rc juice doesn't have the motors for 8s rigs thsts not true im going order one from them , I broke a arm on my outcast 8s but probably landed on quad nerf bar so still not trucks fault, jennys wants 75 bucks for the set and ofcourse all rpm ones are on back order , I may have buy exb kraton so I have parts 😆 🤣

@ShadeTree_RC

3 жыл бұрын

@@paulclancy2404 i saw that on their rcjuice website the other day and yea reefs cost a lil extra but they stand by their products unlike some 50 dollar ebay special at least you have someone to contact lol

@paulclancy2404

3 жыл бұрын

@@ShadeTree_RC forsure..

Have you ever tested the Protek 370tbl if so can you shoot me a link and if not throw it on the next test there's a lot of us that use it in this area and I'm sure we'd be interested in knowing if it's legit and we all watch you

@Uneek637

4 жыл бұрын

I don't think they have. I have been wondering about this servo as well.

@sprather84

4 жыл бұрын

@@Uneek637 I have it in both my trucks and they are awesome

@Uneek637

4 жыл бұрын

@@sprather84 what rigs do you have them in? I am curious about running it in my Trx4.

@sprather84

4 жыл бұрын

@@Uneek637 Trx4sport and trx6

@sprather84

4 жыл бұрын

Come check out my channel

Thanks for the videos! But it would be nice if you tried not to cover the amps while you are making the pulls. For me they are as important as the weight that the servos can pull and often your hand covers that number...

Do the RAW 500

Reefs for the win in my opinion. Lower voltage = less heat and longer longevity

I'm going to get a castle mamba X and the bec can go up to 8v.

Great timing. I just got my chinesium servo i ordered 3 months ago today. (JX) We will see. I bet it is better than the stock trx4's stock servo is.

@RCReviewChannel

4 жыл бұрын

We've reviewed the JX series. Great servos but the torque outputs are about 60% of what they claim. Still pretty good.

@jondoe6618

4 жыл бұрын

@@RCReviewChannel Yea. That explains the cheap cost. Never know till you try it.

And along comes the Turnigy 959 for $35 that has the same output at 7.4v! LOL Seriously though, I have a Reef on my main rig and love it, but that 959 just doesn't quit!

@RCReviewChannel

4 жыл бұрын

Turnigy and the rest of the KGxx servos are good but they measure about 60% of what they claim to be.

@JViello

4 жыл бұрын

​@@RCReviewChannel​​ Oh really? That's good to know! I've seen a few of the 959 specifically punch WAY above their rating on a rig very much like yours. Exocaged RC's channel has a system just like yours except for the power supply. At 8.4v the 959 put out almost 1000 in/oz! It didn't like that voltage though. Not at all. LOL I consider the 959 a special beast though...and never in stock. Sigh... The Hobbyking 15298 puts out 20kg dead nuts. I consider HK and Turnigy the same brand as they are both HK brands. Sadly though HobbyKing seems to be in it's last days. The inventory keeps getting small and smaller. :( Love your content, thanks for the reply!

What happened to the Rs800!?? Promises were made sir!!

@RCReviewChannel

4 жыл бұрын

We experienced problems and they're sending us a new batch. No ETA yet.

@leereed219

4 жыл бұрын

@@RCReviewChannel uh oh. I have 3 of them. I did burn one of them out, but I was running at full 4s, which apparently shouldn't be done? They gave me half off a new one.

@leereed219

4 жыл бұрын

And now I'm running at 3s...

@teamnsdrc8438

4 жыл бұрын

@@leereed219 Our servos state on the website and the case they are a 14.8v maximum voltage. You and @rcreview both fried them by running higher voltage at full 4s 16.8v which is not covered by warranty, but we went ahead and got you a replacement at half price. 👍

@teamnsdrc8438

4 жыл бұрын

Rc Review did experience an issue with 2 of our servos, One of the servos they accidentally turned the power supply voltage up to 18v and fried our servo. The other servo had a software issue and was only producing 76% power so the torque numbers were reading lower than they should. Otherwise when the servos were ran within the correct voltage range they have zero issues or failures 👍

Please, copper Holmes Hobby with Reefs RC 777 or Powerhobby 8014MG or even Reefs with Powerhobby.

@RCReviewChannel

4 жыл бұрын

we'll try.

What about 555 at 7.4v?

@RCReviewChannel

4 жыл бұрын

669 oz/in is what we measured.

@lennythedog6544

4 жыл бұрын

RC Review wow!, thanks buddy, going to order a 555 now try and use your affiliate links!

@ExaltedRC

4 жыл бұрын

I wanna see 3bros g13 in the mix..same price range

holmes does what the reef's does and its faster.. its a better servo.. just requires more power..

It's not really a fair comparison, as the Reefs ($126) is in fact $30-45 more expensive, as you will need a BEC to run it, where the Holmes ($120) runs directly off of the battery. You're basically not getting a 555 in a truck for less than $150. Add to that the fact that the SHV500v3 is literally twice as fast, and the edge in this pairing clearly goes to the Holmes servo. End of the day, a hundred and fifty bucks for a 0.17/0.20 travel time is REAL steep. Do I need those extra few ounces of torque? Dunno. But I'll take sub-0.10sec travel every time.

@paulclancy2404

3 жыл бұрын

I agree I like the speed even more than the crazy torque, 250 to 400 all I need long as .08 transit , but you can run without bec if using castle hw even the 1080 goes up 8.2

All I run on my crawlers is the 555...

@RCReviewChannel

4 жыл бұрын

boom! You caused the shortag!! :)

@jdsrcs8061

4 жыл бұрын

Thanks alot dude for hoarding them all dude!!!! Hahaha just kinding!!!!

@ciscogarcia3463

4 жыл бұрын

JD'S RC'S Lollll Yup got 4 of them but they’re the first version.. and I’ve had them for quite a while already. Now Reefs has the new 555V2

the holmes says 12v so how can 4s be used 14v+

@RCReviewChannel

4 жыл бұрын

they say 14v. The bigger question is 4-cell as a fully charged 4- cell lipo is 16.8v

@garymurphy5133

4 жыл бұрын

@@RCReviewChannel Stupid to put 12v on the servo ,then say 14v is ok!

3rd hi!

Holmes has a 6 bolt compared to the 4 bolt which is like an engine crank more bolts equals more strength. Hnnnn...🤓

@orion000

3 жыл бұрын

🙄

first comment second view third like

@RCReviewChannel

4 жыл бұрын

You rock!

Wow reefs mustve paid for this video. Clearly states DO NOT POWER OVER 7.4V....holmes all day

Reefs tech/customer service is terrible for what he is charging

Seems to me like the 555 blows the HH out of the water.

@rc-daily

4 жыл бұрын

@@themountain59 did we not watch the same video?

@karlvorndran2996

4 жыл бұрын

It depends on what you care about most. Both crank over 700 in torque but he Holmes is much faster. Personally, I value the extra speed. The Holmes doesn't rely on a BEC, which is a plus for me. I don't mind the noise. I have the Holmes in my SCX10 III and the Reefs in my TRX4. Both are great servos but I prefer the Holmes.

@rc-daily

4 жыл бұрын

@@karlvorndran2996 yea but the reefs takes less than 1/2 the voltage to make it and its dead silent. That constant grinding sound would likely drive me crazy. The speed doesn't bother me at all. Everything i have is a crawler and servos half as fast would still be fine. Look up the specs on the servo axial put in their 6x6. Thats a terribly slow servo but it still works ok.

@karlvorndran2996

4 жыл бұрын

Joshua Howell It’s not a direct comparison because the Holmes was designed to be powered direct where the Reefs was designed to be powered with a BEC so the voltage difference is irrelevant. RC cars make noise and most of the time your head is not right next to the servo like it is in the video so it really is a non-issue. If you want a very powerful and quiet servo but don’t mind that it is very slow and needs a BEC, get the Reefs. If you want a fast servo without the need of a BEC and don’t mind a little noise, get the Holmes. Well right now, get whichever you can find in-stock. Again, you can’t got wrong with either servo.

@rc-daily

4 жыл бұрын

@@karlvorndran2996 yeah they're both awesome servos. And yeah, you're right! You better pick up whatever you can find right now! I personally run becs on all of my rigs. I like being able to turn the voltages up and down just messing around with stuff!

Holmes junk go reffs