Recording with the Lowest Possible Latency in REAPER Song used - • Snake City - Couldn't ...
Жүктеу.....
Пікірлер: 173
@FieroGTXX Жыл бұрын
Latency is so low I caught video within seconds of the premier. Haven't even watched it but I know Kenny's gonna drop a bomb 🔥
@NeuStarProductions
Жыл бұрын
That’s good right thuur😅
@tusharjamwal Жыл бұрын
For this to work the setting "Do not process muted tracks" should be checked. You can find this in Preferences -> Audio -> Mute/Solo -> Mute Settings
@REAPERMania
Жыл бұрын
Correct. I didn't mention that because it is on by default.
@djabthrash
11 ай бұрын
I put it in a "custom recording options" toolbar so that i remind myself it matters.
@RanulfoKnox Жыл бұрын
Your videos just make Reaper the best DAW to work with. You can’t find content of this quality in other daws, and this is the one i recommend to new producers because these resources are great for new and experimented ones 😊
@jlmjloi4533
Жыл бұрын
Agreed😊
@robhouse1926
Жыл бұрын
Great job Kenny!
@user-lb7ko8ff8b
Жыл бұрын
I agree. Kenny is a super whiz producer with a tremendous amount of musical talent and is a great communicator. It’s rare to find that. Great photography as well. Great left hook as well lol
@user-lb7ko8ff8b
Жыл бұрын
Hi Kenny I’m starting to see the value of more than one instrument. Is some of the additional tracks just another mic? Should I have the guitar recorded twice or should I have an extra mic in a slightly different position?
@domhatch Жыл бұрын
Neato! Oh the simplicity, the sheer simplicity! Another great Reaper trick broken down into its pros and cons as only you can, Kenny. Keep up the excellence! 🎉
@filthyphil28 Жыл бұрын
I've been having latency issues recently when trying to record live bass and guitar, and this video is the answer to my prayers. Thank you again Kenny.
@Xylume Жыл бұрын
Thanks for reminding me to change my buffer size/block size back to 1024. I was experiencing glitching, pops, crackles and more.
@rexduranzelandony Жыл бұрын
Great workaround. This channel is gold
@bjorn_moren Жыл бұрын
I'm very thankful that you make these videos Kenny. Long time musician here, now trying to become better at recording.
@joeheukerott9186 Жыл бұрын
Brilliant! So smart and so useful! Thank you very much. 🎧🎤
@samaitcheson7057 Жыл бұрын
Great tip Kenny. I'll be using this. Thanks!
@QBtracksandstuff Жыл бұрын
Kenny, how you haven't got a million subs is beyond me. Your knowledge of this DAW has no bounds. Thanks you so much 👍😁
@REAPERMania
Жыл бұрын
We'll get there. LOL. Thanks.
@JonHarris77 Жыл бұрын
I prefer just freezing the individual tracks, or at least the most CPU intensive ones. That way you still have full control over the mix and no need to create/delete folders, move tracks, mute/unmute, etc. Then just unfreeze when you're done and you can edit, adjust FX, etc. Fast and easy. You don't get the benefit of playing back just 1 track or a few stems, but it's usually the CPU that kills you, not reading the audio from disk.
@REAPERMania
Жыл бұрын
Yes. Many different ways to accomplish this same thing.
@brianmac8260
11 ай бұрын
Sometimes I just rendered, opened a new project at the same bpm, change the sample rate, then record the new track. Open the first project in a tab and copy/pasta. Change the sample rate back. But I like this way, saves some steps.
@JustinAdams_music Жыл бұрын
I had no idea that muting a track removed the cpu burden of its effects. Awesome tip.
@mabian69
10 ай бұрын
It's actually optional because in some cases when you have this set muting and unmuting can cause unpleasant noises due to sudden activation of several plugins
@martindl989711 ай бұрын
Kenny, your knowledge is invaluable. Thanks for sharing it!
@mutilatorbcb Жыл бұрын
Thank you as always Kenny!
@dennisray282111 ай бұрын
Because of your videos I will be purchasing Reaper. Thank you.
@davemguru12 Жыл бұрын
Brilliant - as always.
@southsideronnie Жыл бұрын
More great advice! Thanks yet again Kenny!!
@jonmatthews4254 Жыл бұрын
Great idea again Kenny.
@n.oneimportant5 Жыл бұрын
Thanks as always, Kenny!
Жыл бұрын
I came naturally to this kind of workflow. I now have main projects with all busses as subprojects. I regularly print stems in the main project and use them as refrence tracks in each bus subprojects (where i record individual tracks of each group).
@markievalk54952 ай бұрын
You are awesome, i was going crazy trying to figure it out, but it is good now. THANK YOU!
@ulfsvensson9710 Жыл бұрын
That is one of your most useful tips! And that says alot!!
@3fingerjim Жыл бұрын
Excellent as always! Tyvm!
@gitarrenpost Жыл бұрын
Simple and efficient. Great. Thank you.
@AndyCampbellMusic Жыл бұрын
Bottomless pit of knowledge is our Kenny
@derrick_martin_g. Жыл бұрын
This is great insight from Master Kenny as usual. For Windows users, such as myself, adjusting some settings in Windows can greatly decrease latency and glitches. A great tool for analyzation is LatencyMon.
@00varietyshowjoe
Жыл бұрын
What type of Windows settings do you adjust to decrease latency?
@lavryk Жыл бұрын
Great tutorial! Especially what to do after deleting the reference track!
@ARE_YOU_SICK_OF_YT_CENSORSHIP
Жыл бұрын
they need to be deleted from the disk afterwards
@PateFamily_Sunny Жыл бұрын
Very good work
@dannysparrow Жыл бұрын
Thanks so much, this is going to come in handy!
@jlmjloi4533 Жыл бұрын
I'm using i5-12600K with ES9068AS DAC on Reaper, it can handle the lowest 16 block size, 2.6ms RTL without click/pop on Keyscape or Pianoteq (Piano VST), a single-track recording.
@joshmcdzz6925
Жыл бұрын
what? I got same config and mine can't . How did you do it?
@davereichert
10 ай бұрын
@@joshmcdzz6925Disable core parking and frequency scaling in Windows and it'll help. Then reduce the amount of tracks that have a PDC value other than 0. Some plugins like compressors/limiters are really bad with this.
@Nava4Gamingz11 ай бұрын
This is gold.
@EyesOfEgypt10 ай бұрын
Thank you so much for this!!
@petealba707 Жыл бұрын
I had some latency issues when I was using the 32 bit version but adjusted as you did with better results though I'd get an occasional pop. Since switching to 64 bit I've had zero latency issues and no pops.
@BeastmodeBeatsАй бұрын
Great tips,using frozen busses helps to add more sounds when building a beat
@pedrod.75764 ай бұрын
This is tremendously useful
@themayor3263 Жыл бұрын
Love your vids they have helped me greatly keep it up Kenny!!!!.... Quick questions I am a novice but how do I stop reverb and delay from continuing on after I stop track???. Im using all stock plugins from reaper... Thank you
@jcleivaamoros4 ай бұрын
AWESOME, THANK YOU
@rafalvarezsevilla Жыл бұрын
also its not always necesary to freeze all tracks, just look in the performance meter, which tracks are cousing most of the load, and you can only freeze those tracks in place without changing any routing
These clips are really awesome! Now I have to open Reaper, take a guitar, bass or synths, And keep on working.
@psyzmech9044 Жыл бұрын
Hi Kenny, love your videos, please can you explain how I can automate pitch bend from my vsts instruments that have no pitch wheel. Thanks
@eegoal Жыл бұрын
Every time I consider switching to another daw Kenny: Where do you think you're going; Come here, you're not going anywhere!
@jamescuttsmusicjcm5013
Жыл бұрын
What are "another daw"s? ahahaha. just messing. i don't pay it no mind anymore since using Reaper.
@eegoal
Жыл бұрын
@@jamescuttsmusicjcm5013 hahaha
@musicmaestrodj11 ай бұрын
How do you pull up the performance meter? Thanks 🙏
@roryreagan975 Жыл бұрын
Kenny, always love your videos and they teach so much. Thanks. I am travelling atm and wanting to create on the go so I grabbed my wireless headphones... it turned out that it was creating the lag. I guess that makes sense as I was sitting back and thinking about it but luckily I brought some basic earbuds that plug in. Anyone else come across this? Or maybe its the unwritten rule about using midi, don't use wireless things...
@djabthrash
11 ай бұрын
The problem is not midi, it is the wireless... You have to know the latency of your wireless system (ex : bluetooth might have too much latency to be usable) to see if it works for you.
@Shineequlity Жыл бұрын
Yesterday i tested performance meter for the first time after i saw the previous video. But RT xruns and media xruns just remain as 0 even tho i heard lots of buffer click noises... and yellow flash has never showned.. why it doesnt work on my computer?
@teashea1 Жыл бұрын
excellent video - as always ---- However, I prefer to use direct monitoring - The singers I deal with do not mind recording dry.
@andreasfranzmann9634 Жыл бұрын
OR you have a computer that is able to keep up with high track counts in low latency settings. Just like Kenny who has to put the glitches in visually and with samples because his computer is so strong. 😂 Great video as always Kenny, highly appreciated!
@REAPERMania
Жыл бұрын
I actually was able to make my computer glitch (actually set it to 16 samples) but I thought this looked better.
@revp01 Жыл бұрын
Kenny! Awesome tip! You are a blessing to the reaper community always!
@martinwarhurst8692 Жыл бұрын
Great tutorial as ever but wondered if you could help me in that I use Reaper with VSTs and currently have analogue lab v which I want to use on separate tracks. Separate sounds etc. I can get it on one with no problem but on a 2nd is escaping me. I must be doing something wrong????
@ThomasECahill Жыл бұрын
Brilliant simple.
@MOROZOVVADIM Жыл бұрын
Кенни, ты лучший!:)
@TazzSmk Жыл бұрын
moving folders and messing with routing isn't actually a good idea, in fact, in the mixing process it's very desirable to have those folder busses for instruments/groups, also often such stems are delivered for stem (re)mastering so it's always smart to keep those (also keep those in case of no longer having access to plugins used in project for ex.), - more elegant and versatile way is to simply mute and hide source tracks (View - Track manager), and to save time re-rendering when working with multiple musicians, it's possible to select and mute (Alt+M) those rendered/frozen items in folder tracks
@djabthrash
11 ай бұрын
- the stems you rendered/used during tracking are not the same than those you send to mastering, because the ones you send to mastering you send them once you're done mixing. At this stage the stems would sound nowhere near as they would sound during tracking. - the folders, used in the way shown in the video, allow you to quickly render stems for each instrument and have one track as a volume (just like a subgroup or a DCA) for this instrument for the tracking mix. There might be an even better way but this is very clever and efficient already imo - i agree hiding tracks i very good, but here he uses the stereo stem tracks to adjust the mix balance for tracking so he needs to see them. Also : it'as also good to see the source tracks, even if they are frozen/rendered and muted, because their waveform help you seeing where you are in the session
@slangking1 Жыл бұрын
I'd never have thought that track mute actually bypasses cpu use for FX (as it were)..
@mentalprogram525611 ай бұрын
This is great i find singing in tune with headohone on really requires low latency. This is super helpful. I wish there was a way to automate this. Tracking mode / Mixing mode.
@djabthrash
11 ай бұрын
You can add buttons in your toolbar so you have these settings real close. you can also create templates or even portable installs (which is what Kenny does) with their own settings for each type of session you do : recording, editing, mixing, ...
@mentalprogram5256
10 ай бұрын
@@djabthrash none of this really works. I would prefer to track at 48 and mix at 96 but I dont feel like using two sessions.
@jaballesterosvideospractic903 Жыл бұрын
Hola Kenny, ésta vez no se generaron los subtitulos. Sabes por que ocurrió? Muchas gracias por tu trabajo
@braunhausmedia Жыл бұрын
GREAT video. What color scheme do you use for your tracks, because I love those muted pastels.
@thebeardedkozak9 ай бұрын
Great video! How about if I'm recording drums while listening to 1 reference track but that reference track audio drops out here and there? Would that still go back to buffer size?
@sirdrakey Жыл бұрын
This is one way to skin the cat! I would have sent the singer a separate monitor mix after mixing down the steams into groups.
@dfgvjnkjdsnbkjsbdvjkhdsb Жыл бұрын
hello Kenny! how to quantize midi item with shortcut key (example: select item - press Q) without opening midi editor?
@richardmiklos466 Жыл бұрын
I just started working in Reaper and I'm wondering if it is possible, when I create a copy of an audio track, to make a copy that is completely separate from the original track. I made a copy of a track, took it into an audio program to tweak it and raise the pitch an octave and when it came back in both that track and the original were changed. It would be great to have the option of holding down control AND another key, to make a new SEPARATE copy of the original. THANKS Rick BTW, if this option already exists, please put a link to a video on how to do it in the reply. thanks. BTW: I LOVE all the control that I'm seeing with Reaper!! NOW, I just have to learn it.
@REAPERMania
Жыл бұрын
It should already be separate. Are you possibly selecting both tracks after you duplicate them?
@Sunomusikai Жыл бұрын
please how do you change chord minor to major midi with one click?
@TheCure20249 ай бұрын
Hi, I installed a new reaper in my laptop, and I encountered latency. I tried to adjust the buffer/ sample and also installed the ASIOALL driver, then adjusted output and input manual offset. Still encountered the same issues.
@oswsouza Жыл бұрын
Sorry, não sei se é com você, mas nesse seu vídeo não está disponível a legenda. Sou do Rio de Janeiro, Brasil, e não entendo seu idioma. Te acompanho e aprendo muito com você. Muito obrigado pelo seus vídeos. Grande abraço.
@oswsouza
Жыл бұрын
Obrigado sua atenção...
@Zerroth8 ай бұрын
The audio settings for me within Audio -> Device is very different to what is displayed in this video.
@tam_ryan10364 ай бұрын
On the verge of switching from Studio One to Reaper. Bit scared but this is good to know. Thanks so much Kenny! Btw is this track finished and available online? I love it! 😊👍
@chrisdaviesguitar Жыл бұрын
Another genius post, thanks again. Out of curiosity, on the melodic guitars, do you fade them in ad out? Do you have a custom shortcut for the performance meter?
@REAPERMania
Жыл бұрын
The performance meter already has a keyboard shortcut by default. Alt + Control on PC and Option + Command on Mac.
@chrisdaviesguitar
Жыл бұрын
@@REAPERMania cheers matey
@REAPERMania
Жыл бұрын
@@chrisdaviesguitar What did you mean by fade them in and out?
@leo.nordmann9 ай бұрын
That's exactly how I did it recording some guitar to already mixed drums.
@artysanmobile4 ай бұрын
I’m a Pro Tools user of 25 years. I’ve had a lot of time to wonder how DAWs without a DSP option even manage to survive. This is a good emergency workaround, but nothing more. Tracks get added in a near constant flow throughout the production process. Can you imagine re-freezing every few minutes as the need arises over and over and over etc….? Looking at the market, I’ve still never seen any DAW take advantage of the DSP capability of another DAW. Does anyone know actual $ numbers to explain why this is so? It’s hard to believe no one has ever asked this question.
@damienro08 ай бұрын
What if you have the opossite problem? when you record it-s not late but actually ahead of time? how do you fix that
@tomdick6935 ай бұрын
also, when you're "recording", you dont need all the effects active on every single track. You dont need drum verb while tracking, you dont need chorus on the guitars, ect. All that can be add later.
@synthesaurus4 ай бұрын
logic has a button that let s me deal with this fast and easy.
@nugznmugz Жыл бұрын
Lurlene! Nice.
@5puchacz9 ай бұрын
Is it possible to hear somewhere full song that is used here as an example?
@cgsmithinnola Жыл бұрын
Are there any benefits to using 1024 over 2048? I've always just used 2048 when mixing.
@jamescuttsmusicjcm5013
Жыл бұрын
Changes will be more instant. EQing can feel "laggy" for instance if the buffer is too high. It isn't neccessarily unworkable, just potentially annoying.
@nicholasgonzales7521 Жыл бұрын
Hi Kenny I have a specific question involving reverb attached to plugins. I know this isn’t about reverb. But I am seriously struggling to find answers about this! I have a plugin that functions completely normal outside of reaper but when loaded into reaper it has a ton of reverb that cannot be removed. What is happening!!?? Please help me pleeeeease!!
@MrBusiness-vc7bs Жыл бұрын
Hope you tell me how I can learn the basics of Reaper software then learn reaper for voice over I'm new to reaper world so hope you answer my questions
@arturopopoli2395 Жыл бұрын
Not the point of the video but... that snare sound!
@slcustomcarpentry8533 ай бұрын
Do you have a tutorial on reaper and obs? I am having amazing results with reaper, I'm able to get my reaper to obs, but I'm getting weird phase and fluctuations through OBS. Any help would be greatly appreciated. Your videos are amazing. Thanks in advance
@user-lb7ko8ff8b Жыл бұрын
Can anyone tell me if fxs are applied individually to the tracks or applied as a group?
@REAPERMania
Жыл бұрын
Which FX?
@Bluelagoonstudios Жыл бұрын
Hi Kenny, I have a hard one for you, if you have many presets in a plugin, how can you sort them? Even in the Forum, they can't answer that one? When I was new to Reaper, I used this technique, to create some headphone buses, the project was almost done, I deleted the parent tracks and bye bye project, and with trying to get it right, I did more damage. So I'm very careful with creating extra buses. Sometimes you learn it the hard way. 😁
@djabthrash
11 ай бұрын
"Sort them" as in "reorder them" ? If so, just open the FX window and drag and drop them to reorder them. You can also do this in the mixer view (drag and drop them).
@Bluelagoonstudios
11 ай бұрын
@@djabthrash I'm not talking about the plugins, but the presets into the plugin. They can't be moved any way. I wish you can sort them, and I'm talking about Cockos and native plugins.
@djabthrash
11 ай бұрын
@@Bluelagoonstudios Sorry i missed the "preset" work in your OP :) You can reorder FX presets actually : click on the "+" button at the right of the preset drop down menu and use "move up" and "move down". EDIT : not sure why you would need FX preset reordering that much... Do you use tons of fx presets ? Maybe you should just save the FX as an fx chain and reload that, instead of a preset inside the fx plugin.
@bcain58237 ай бұрын
Been having an issue lately with popping and cracking getting recorded on a track. Don't notice it when we're doing the actual recording but it's there on playback. Hard to determine if this is a buffer, cpu, or something else. I run Windows 10, Dell Inspiron 15, i7 core with 4 cores, 16G RAM, SSL2 audio interface with buffer set to 512. The Performance Meter shows nothing. Any ideas on what to look for?
@bartoliblue7 ай бұрын
I know how to send the whole mix to a ref track, but I don't understand how to send drums, guitars, etc, to their respective ref tracks. Can anyone help?
@ShreddierThings Жыл бұрын
Could someone help me? I'm trying to edit videos in reaper and the video lags. After I render it, it get all pixelated. I shot the video in 4k 30fps. I have done other videos but used 1080 60fps and didn't have any issues.
@REAPERMania
Жыл бұрын
Did you turn off Hi Res waveforms for the video items?
@ShreddierThings
Жыл бұрын
@REAPERMania I did. Just finished downloading an ffmpeg build and I think I got it working properly
@ShreddierThings
Жыл бұрын
Ok I ran into another problem and hopefully you have a solution haha. I'm trying to render video with audio using video (ffmpeg/libav encoder) QT/MOV/MP4, H.246. I can't render using AAC or mp3 audio, I keep get the error code "the target drive/path does not exist, or is in use" error initializing audio encoder, output file-no output. I can render with 24 bit audio but that won't work with instagram. Any ideas? Using reaper v6.81. Thanks!
@banterbanter Жыл бұрын
Time from video end to me clicking 'like', 2ms
@adrienteixeira5590 Жыл бұрын
I always wondered why reaper doesn't have set block sizes. Like a drop down with 32, 64, 128, 256, 512, and 1024 etc. is there a benefit to having different block sizes? Like I don't, 55? Also, is there an easier way to change block size than having to go to the preferences?
@ARE_YOU_SICK_OF_YT_CENSORSHIP
Жыл бұрын
i could be wrong but it's likely that if you use a value which is not a power of 2 internally it'll still be rounded down to the closest power of 2 what i don't know is why this should be so there's a script to change the block size via menu, forum reference t=264010, it's showcased in this video v=6BKgBBSe2Q0 where you can find Kenny in the comments
@REAPERMania
Жыл бұрын
That's a good question. I'll ask and get back to you. Thanks.
@REAPERMania
Жыл бұрын
From the man - Some devices have odd block size preferences - there’s no real benefit to powers of two anyway
@ARE_YOU_SICK_OF_YT_CENSORSHIP
Жыл бұрын
@@REAPERMania but it looks cool and meaningful odd in a sense of weird or not even?
@adrienteixeira5590
Жыл бұрын
@@ARE_YOU_SICK_OF_YT_CENSORSHIP thanks for pointing out the menu block size, that's amazing - the reaper community is just the best
@danieltv12311 ай бұрын
Can't you simply freeze all tracks and then Unfreeze them after recording?
@ErreGamer11 ай бұрын
Amazing as always. ps: What a pain in the ass of a client tho 😅
@unleashthefury111 Жыл бұрын
Wouldn't it be easier just to slide the track over after recording to match with the timing?
@REAPERMania
Жыл бұрын
How are you going to perform to it though?
@unleashthefury111
Жыл бұрын
@@REAPERMania not sure how to answer that. I perform to everything else, without it. Just perform to a click
@jlmjloi4533
Жыл бұрын
You can do that only if you're not monitoring yourself. Without self-monitoring, it is difficult to pitch correct for vocal.
@raycochrane3971 Жыл бұрын
Is there no way the master/stereo bus can record to a new track with the minute latency that creates being adjusted?
@frankpratte8358
Жыл бұрын
If I understand your question... Reaper has latency compensation and Kenny did a Reaper Mania video on that: kzread.info/dash/bejne/eo6Xurxym6iwkrw.html
@raycochrane3971
Жыл бұрын
@@frankpratte8358 close I think...Instead of creating the folder etc. etc. I'd like to "render" the mix to a single track within the project, solo that and do the vocal tracking with that as the backing with no phase issues due to the latency possibly caused by rendering into the track. Too hard? Too silly?
@frankpratte8358
Жыл бұрын
@@raycochrane3971 In the Render to file window the 5th button near the bottom is "Add rendered items to new tracks in project". I just tried it and there was no latency and no phase issues between the rendered track and the project, (I did it with just one track in the project so I could easily line up the "dots" as Kenny did in his video). As you wrote, this would be another way of accomplishing what Kenny did in his video. I'm not sure soloing the rendered track would turn off all the processing of the fx in the other tracks, maybe you would need to mute all the other tracks instead. Easy enough to do an experiment. Another note, when you rendered the project, any fx in the master channel would be printed on the rendered track. You wouldn't want that track to run back through those effects a second time. In the routing window of the rendered track turn off the Master send button and add an output in the Audio Hardware Outputs drop down window. Or, you could just turn off the fx in the master channel when playing the rendered track.
@raycochrane3971
Жыл бұрын
@@frankpratte8358 BRILLIANT - thank you. Reaper has a treasure trove of untried, unread, unknown facets for me. PHANQUE.
@FloofyOneTorpheus3 ай бұрын
Okay so how do you bring up that preference meter?
@midiman5045 Жыл бұрын
Nice way to get around a slow USB interface.I think the easiest way is just to get a Fire wire or Thunderbolt interface.I got a Presonus 2626 it's really great at latency. Seriously very low latency. The higher I go in sample rate the lower the latency. It's like .7 round trip at 192 128 buffer. Could you script that trick you have? This info was not to scold anyone just to give honest feedback about Thunderbolt interface.
@brentharmonmusicproduction
Жыл бұрын
You still get latency with Thunderbolt
@electricwhiterabbit
Жыл бұрын
The latency on USB RME cards is lower than Thunderbolt. The issue isn't USB, the issue is the drivers. USB has plenty enough throughput for audio.
@midiman5045
Жыл бұрын
@@electricwhiterabbit no way try 192 / 128 you will not get .7 round trip. My old pro 40 was better at latency than USB.Yes that is .7 not 7. You are incorrect the issue with USB is the crc check sum that is transmitted with the audio signal. That is why FW was faster than USB because there was not over load on the data buss with other data. Please do you research. Yes in theory it should be faster but in reality that is another story.
@midiman5045
Жыл бұрын
@@brentharmonmusicproduction If you call..7 at 192 / 128 is latency I can live with it.
@electricwhiterabbit
Жыл бұрын
@@midiman5045 Huh? 192? Who records at that high of a sample rate?I record at 48. BTW, I did my research. Also Firewire is no more. It is USB or Thunderbolt unless you go into Dante or stuff like that which is more for pro studios. Check out the specs of RME USB interfaces. The latency is some of the best out there.
@astheticworld4507 Жыл бұрын
If this DAW has So many potentials Why Industry Producers or Engineers Don't use Reaper ??🙄
@djabthrash
11 ай бұрын
More and more are using Reaper (and other daws as well : logic, cubase/nuendo, studio one) while Pro Tools is slowly dying. And there are a LOT of Reaper users already.
@aubreymcgee8230 Жыл бұрын
My problem with computer software companies is this should be made a script provided by the DAW coders themselves.
@MrWebsieАй бұрын
I’ve been using reaper for a while now mixing, but now I’m recording, the latency is a big disappointment, I don’t have that latency issue in pro tools, I really don’t want to go back to pro tools, but these issues just aren’t there. Same equipment, like I said it’s very disappointing.
@kurtjanssen3887 Жыл бұрын
Hey Kenny, I'm getting withdrawal symptoms....new video please😂🎉
Пікірлер: 173
Latency is so low I caught video within seconds of the premier. Haven't even watched it but I know Kenny's gonna drop a bomb 🔥
@NeuStarProductions
Жыл бұрын
That’s good right thuur😅
For this to work the setting "Do not process muted tracks" should be checked. You can find this in Preferences -> Audio -> Mute/Solo -> Mute Settings
@REAPERMania
Жыл бұрын
Correct. I didn't mention that because it is on by default.
@djabthrash
11 ай бұрын
I put it in a "custom recording options" toolbar so that i remind myself it matters.
Your videos just make Reaper the best DAW to work with. You can’t find content of this quality in other daws, and this is the one i recommend to new producers because these resources are great for new and experimented ones 😊
@jlmjloi4533
Жыл бұрын
Agreed😊
@robhouse1926
Жыл бұрын
Great job Kenny!
@user-lb7ko8ff8b
Жыл бұрын
I agree. Kenny is a super whiz producer with a tremendous amount of musical talent and is a great communicator. It’s rare to find that. Great photography as well. Great left hook as well lol
@user-lb7ko8ff8b
Жыл бұрын
Hi Kenny I’m starting to see the value of more than one instrument. Is some of the additional tracks just another mic? Should I have the guitar recorded twice or should I have an extra mic in a slightly different position?
Neato! Oh the simplicity, the sheer simplicity! Another great Reaper trick broken down into its pros and cons as only you can, Kenny. Keep up the excellence! 🎉
I've been having latency issues recently when trying to record live bass and guitar, and this video is the answer to my prayers. Thank you again Kenny.
Thanks for reminding me to change my buffer size/block size back to 1024. I was experiencing glitching, pops, crackles and more.
Great workaround. This channel is gold
I'm very thankful that you make these videos Kenny. Long time musician here, now trying to become better at recording.
Brilliant! So smart and so useful! Thank you very much. 🎧🎤
Great tip Kenny. I'll be using this. Thanks!
Kenny, how you haven't got a million subs is beyond me. Your knowledge of this DAW has no bounds. Thanks you so much 👍😁
@REAPERMania
Жыл бұрын
We'll get there. LOL. Thanks.
I prefer just freezing the individual tracks, or at least the most CPU intensive ones. That way you still have full control over the mix and no need to create/delete folders, move tracks, mute/unmute, etc. Then just unfreeze when you're done and you can edit, adjust FX, etc. Fast and easy. You don't get the benefit of playing back just 1 track or a few stems, but it's usually the CPU that kills you, not reading the audio from disk.
@REAPERMania
Жыл бұрын
Yes. Many different ways to accomplish this same thing.
@brianmac8260
11 ай бұрын
Sometimes I just rendered, opened a new project at the same bpm, change the sample rate, then record the new track. Open the first project in a tab and copy/pasta. Change the sample rate back. But I like this way, saves some steps.
I had no idea that muting a track removed the cpu burden of its effects. Awesome tip.
@mabian69
10 ай бұрын
It's actually optional because in some cases when you have this set muting and unmuting can cause unpleasant noises due to sudden activation of several plugins
Kenny, your knowledge is invaluable. Thanks for sharing it!
Thank you as always Kenny!
Because of your videos I will be purchasing Reaper. Thank you.
Brilliant - as always.
More great advice! Thanks yet again Kenny!!
Great idea again Kenny.
Thanks as always, Kenny!
I came naturally to this kind of workflow. I now have main projects with all busses as subprojects. I regularly print stems in the main project and use them as refrence tracks in each bus subprojects (where i record individual tracks of each group).
You are awesome, i was going crazy trying to figure it out, but it is good now. THANK YOU!
That is one of your most useful tips! And that says alot!!
Excellent as always! Tyvm!
Simple and efficient. Great. Thank you.
Bottomless pit of knowledge is our Kenny
This is great insight from Master Kenny as usual. For Windows users, such as myself, adjusting some settings in Windows can greatly decrease latency and glitches. A great tool for analyzation is LatencyMon.
@00varietyshowjoe
Жыл бұрын
What type of Windows settings do you adjust to decrease latency?
Great tutorial! Especially what to do after deleting the reference track!
@ARE_YOU_SICK_OF_YT_CENSORSHIP
Жыл бұрын
they need to be deleted from the disk afterwards
Very good work
Thanks so much, this is going to come in handy!
I'm using i5-12600K with ES9068AS DAC on Reaper, it can handle the lowest 16 block size, 2.6ms RTL without click/pop on Keyscape or Pianoteq (Piano VST), a single-track recording.
@joshmcdzz6925
Жыл бұрын
what? I got same config and mine can't . How did you do it?
@davereichert
10 ай бұрын
@@joshmcdzz6925Disable core parking and frequency scaling in Windows and it'll help. Then reduce the amount of tracks that have a PDC value other than 0. Some plugins like compressors/limiters are really bad with this.
This is gold.
Thank you so much for this!!
I had some latency issues when I was using the 32 bit version but adjusted as you did with better results though I'd get an occasional pop. Since switching to 64 bit I've had zero latency issues and no pops.
Great tips,using frozen busses helps to add more sounds when building a beat
This is tremendously useful
Love your vids they have helped me greatly keep it up Kenny!!!!.... Quick questions I am a novice but how do I stop reverb and delay from continuing on after I stop track???. Im using all stock plugins from reaper... Thank you
AWESOME, THANK YOU
also its not always necesary to freeze all tracks, just look in the performance meter, which tracks are cousing most of the load, and you can only freeze those tracks in place without changing any routing
Kenny rules reaper! Thanks Kenny!!? Extremely useful video!
Great Video!!
Good advice
killer - thanks kenny!!
You are the best!
These clips are really awesome! Now I have to open Reaper, take a guitar, bass or synths, And keep on working.
Hi Kenny, love your videos, please can you explain how I can automate pitch bend from my vsts instruments that have no pitch wheel. Thanks
Every time I consider switching to another daw Kenny: Where do you think you're going; Come here, you're not going anywhere!
@jamescuttsmusicjcm5013
Жыл бұрын
What are "another daw"s? ahahaha. just messing. i don't pay it no mind anymore since using Reaper.
@eegoal
Жыл бұрын
@@jamescuttsmusicjcm5013 hahaha
How do you pull up the performance meter? Thanks 🙏
Kenny, always love your videos and they teach so much. Thanks. I am travelling atm and wanting to create on the go so I grabbed my wireless headphones... it turned out that it was creating the lag. I guess that makes sense as I was sitting back and thinking about it but luckily I brought some basic earbuds that plug in. Anyone else come across this? Or maybe its the unwritten rule about using midi, don't use wireless things...
@djabthrash
11 ай бұрын
The problem is not midi, it is the wireless... You have to know the latency of your wireless system (ex : bluetooth might have too much latency to be usable) to see if it works for you.
Yesterday i tested performance meter for the first time after i saw the previous video. But RT xruns and media xruns just remain as 0 even tho i heard lots of buffer click noises... and yellow flash has never showned.. why it doesnt work on my computer?
excellent video - as always ---- However, I prefer to use direct monitoring - The singers I deal with do not mind recording dry.
OR you have a computer that is able to keep up with high track counts in low latency settings. Just like Kenny who has to put the glitches in visually and with samples because his computer is so strong. 😂 Great video as always Kenny, highly appreciated!
@REAPERMania
Жыл бұрын
I actually was able to make my computer glitch (actually set it to 16 samples) but I thought this looked better.
Kenny! Awesome tip! You are a blessing to the reaper community always!
Great tutorial as ever but wondered if you could help me in that I use Reaper with VSTs and currently have analogue lab v which I want to use on separate tracks. Separate sounds etc. I can get it on one with no problem but on a 2nd is escaping me. I must be doing something wrong????
Brilliant simple.
Кенни, ты лучший!:)
moving folders and messing with routing isn't actually a good idea, in fact, in the mixing process it's very desirable to have those folder busses for instruments/groups, also often such stems are delivered for stem (re)mastering so it's always smart to keep those (also keep those in case of no longer having access to plugins used in project for ex.), - more elegant and versatile way is to simply mute and hide source tracks (View - Track manager), and to save time re-rendering when working with multiple musicians, it's possible to select and mute (Alt+M) those rendered/frozen items in folder tracks
@djabthrash
11 ай бұрын
- the stems you rendered/used during tracking are not the same than those you send to mastering, because the ones you send to mastering you send them once you're done mixing. At this stage the stems would sound nowhere near as they would sound during tracking. - the folders, used in the way shown in the video, allow you to quickly render stems for each instrument and have one track as a volume (just like a subgroup or a DCA) for this instrument for the tracking mix. There might be an even better way but this is very clever and efficient already imo - i agree hiding tracks i very good, but here he uses the stereo stem tracks to adjust the mix balance for tracking so he needs to see them. Also : it'as also good to see the source tracks, even if they are frozen/rendered and muted, because their waveform help you seeing where you are in the session
I'd never have thought that track mute actually bypasses cpu use for FX (as it were)..
This is great i find singing in tune with headohone on really requires low latency. This is super helpful. I wish there was a way to automate this. Tracking mode / Mixing mode.
@djabthrash
11 ай бұрын
You can add buttons in your toolbar so you have these settings real close. you can also create templates or even portable installs (which is what Kenny does) with their own settings for each type of session you do : recording, editing, mixing, ...
@mentalprogram5256
10 ай бұрын
@@djabthrash none of this really works. I would prefer to track at 48 and mix at 96 but I dont feel like using two sessions.
Hola Kenny, ésta vez no se generaron los subtitulos. Sabes por que ocurrió? Muchas gracias por tu trabajo
GREAT video. What color scheme do you use for your tracks, because I love those muted pastels.
Great video! How about if I'm recording drums while listening to 1 reference track but that reference track audio drops out here and there? Would that still go back to buffer size?
This is one way to skin the cat! I would have sent the singer a separate monitor mix after mixing down the steams into groups.
hello Kenny! how to quantize midi item with shortcut key (example: select item - press Q) without opening midi editor?
I just started working in Reaper and I'm wondering if it is possible, when I create a copy of an audio track, to make a copy that is completely separate from the original track. I made a copy of a track, took it into an audio program to tweak it and raise the pitch an octave and when it came back in both that track and the original were changed. It would be great to have the option of holding down control AND another key, to make a new SEPARATE copy of the original. THANKS Rick BTW, if this option already exists, please put a link to a video on how to do it in the reply. thanks. BTW: I LOVE all the control that I'm seeing with Reaper!! NOW, I just have to learn it.
@REAPERMania
Жыл бұрын
It should already be separate. Are you possibly selecting both tracks after you duplicate them?
please how do you change chord minor to major midi with one click?
Hi, I installed a new reaper in my laptop, and I encountered latency. I tried to adjust the buffer/ sample and also installed the ASIOALL driver, then adjusted output and input manual offset. Still encountered the same issues.
Sorry, não sei se é com você, mas nesse seu vídeo não está disponível a legenda. Sou do Rio de Janeiro, Brasil, e não entendo seu idioma. Te acompanho e aprendo muito com você. Muito obrigado pelo seus vídeos. Grande abraço.
@oswsouza
Жыл бұрын
Obrigado sua atenção...
The audio settings for me within Audio -> Device is very different to what is displayed in this video.
On the verge of switching from Studio One to Reaper. Bit scared but this is good to know. Thanks so much Kenny! Btw is this track finished and available online? I love it! 😊👍
Another genius post, thanks again. Out of curiosity, on the melodic guitars, do you fade them in ad out? Do you have a custom shortcut for the performance meter?
@REAPERMania
Жыл бұрын
The performance meter already has a keyboard shortcut by default. Alt + Control on PC and Option + Command on Mac.
@chrisdaviesguitar
Жыл бұрын
@@REAPERMania cheers matey
@REAPERMania
Жыл бұрын
@@chrisdaviesguitar What did you mean by fade them in and out?
That's exactly how I did it recording some guitar to already mixed drums.
I’m a Pro Tools user of 25 years. I’ve had a lot of time to wonder how DAWs without a DSP option even manage to survive. This is a good emergency workaround, but nothing more. Tracks get added in a near constant flow throughout the production process. Can you imagine re-freezing every few minutes as the need arises over and over and over etc….? Looking at the market, I’ve still never seen any DAW take advantage of the DSP capability of another DAW. Does anyone know actual $ numbers to explain why this is so? It’s hard to believe no one has ever asked this question.
What if you have the opossite problem? when you record it-s not late but actually ahead of time? how do you fix that
also, when you're "recording", you dont need all the effects active on every single track. You dont need drum verb while tracking, you dont need chorus on the guitars, ect. All that can be add later.
logic has a button that let s me deal with this fast and easy.
Lurlene! Nice.
Is it possible to hear somewhere full song that is used here as an example?
Are there any benefits to using 1024 over 2048? I've always just used 2048 when mixing.
@jamescuttsmusicjcm5013
Жыл бұрын
Changes will be more instant. EQing can feel "laggy" for instance if the buffer is too high. It isn't neccessarily unworkable, just potentially annoying.
Hi Kenny I have a specific question involving reverb attached to plugins. I know this isn’t about reverb. But I am seriously struggling to find answers about this! I have a plugin that functions completely normal outside of reaper but when loaded into reaper it has a ton of reverb that cannot be removed. What is happening!!?? Please help me pleeeeease!!
Hope you tell me how I can learn the basics of Reaper software then learn reaper for voice over I'm new to reaper world so hope you answer my questions
Not the point of the video but... that snare sound!
Do you have a tutorial on reaper and obs? I am having amazing results with reaper, I'm able to get my reaper to obs, but I'm getting weird phase and fluctuations through OBS. Any help would be greatly appreciated. Your videos are amazing. Thanks in advance
Can anyone tell me if fxs are applied individually to the tracks or applied as a group?
@REAPERMania
Жыл бұрын
Which FX?
Hi Kenny, I have a hard one for you, if you have many presets in a plugin, how can you sort them? Even in the Forum, they can't answer that one? When I was new to Reaper, I used this technique, to create some headphone buses, the project was almost done, I deleted the parent tracks and bye bye project, and with trying to get it right, I did more damage. So I'm very careful with creating extra buses. Sometimes you learn it the hard way. 😁
@djabthrash
11 ай бұрын
"Sort them" as in "reorder them" ? If so, just open the FX window and drag and drop them to reorder them. You can also do this in the mixer view (drag and drop them).
@Bluelagoonstudios
11 ай бұрын
@@djabthrash I'm not talking about the plugins, but the presets into the plugin. They can't be moved any way. I wish you can sort them, and I'm talking about Cockos and native plugins.
@djabthrash
11 ай бұрын
@@Bluelagoonstudios Sorry i missed the "preset" work in your OP :) You can reorder FX presets actually : click on the "+" button at the right of the preset drop down menu and use "move up" and "move down". EDIT : not sure why you would need FX preset reordering that much... Do you use tons of fx presets ? Maybe you should just save the FX as an fx chain and reload that, instead of a preset inside the fx plugin.
Been having an issue lately with popping and cracking getting recorded on a track. Don't notice it when we're doing the actual recording but it's there on playback. Hard to determine if this is a buffer, cpu, or something else. I run Windows 10, Dell Inspiron 15, i7 core with 4 cores, 16G RAM, SSL2 audio interface with buffer set to 512. The Performance Meter shows nothing. Any ideas on what to look for?
I know how to send the whole mix to a ref track, but I don't understand how to send drums, guitars, etc, to their respective ref tracks. Can anyone help?
Could someone help me? I'm trying to edit videos in reaper and the video lags. After I render it, it get all pixelated. I shot the video in 4k 30fps. I have done other videos but used 1080 60fps and didn't have any issues.
@REAPERMania
Жыл бұрын
Did you turn off Hi Res waveforms for the video items?
@ShreddierThings
Жыл бұрын
@REAPERMania I did. Just finished downloading an ffmpeg build and I think I got it working properly
@ShreddierThings
Жыл бұрын
Ok I ran into another problem and hopefully you have a solution haha. I'm trying to render video with audio using video (ffmpeg/libav encoder) QT/MOV/MP4, H.246. I can't render using AAC or mp3 audio, I keep get the error code "the target drive/path does not exist, or is in use" error initializing audio encoder, output file-no output. I can render with 24 bit audio but that won't work with instagram. Any ideas? Using reaper v6.81. Thanks!
Time from video end to me clicking 'like', 2ms
I always wondered why reaper doesn't have set block sizes. Like a drop down with 32, 64, 128, 256, 512, and 1024 etc. is there a benefit to having different block sizes? Like I don't, 55? Also, is there an easier way to change block size than having to go to the preferences?
@ARE_YOU_SICK_OF_YT_CENSORSHIP
Жыл бұрын
i could be wrong but it's likely that if you use a value which is not a power of 2 internally it'll still be rounded down to the closest power of 2 what i don't know is why this should be so there's a script to change the block size via menu, forum reference t=264010, it's showcased in this video v=6BKgBBSe2Q0 where you can find Kenny in the comments
@REAPERMania
Жыл бұрын
That's a good question. I'll ask and get back to you. Thanks.
@REAPERMania
Жыл бұрын
From the man - Some devices have odd block size preferences - there’s no real benefit to powers of two anyway
@ARE_YOU_SICK_OF_YT_CENSORSHIP
Жыл бұрын
@@REAPERMania but it looks cool and meaningful odd in a sense of weird or not even?
@adrienteixeira5590
Жыл бұрын
@@ARE_YOU_SICK_OF_YT_CENSORSHIP thanks for pointing out the menu block size, that's amazing - the reaper community is just the best
Can't you simply freeze all tracks and then Unfreeze them after recording?
Amazing as always. ps: What a pain in the ass of a client tho 😅
Wouldn't it be easier just to slide the track over after recording to match with the timing?
@REAPERMania
Жыл бұрын
How are you going to perform to it though?
@unleashthefury111
Жыл бұрын
@@REAPERMania not sure how to answer that. I perform to everything else, without it. Just perform to a click
@jlmjloi4533
Жыл бұрын
You can do that only if you're not monitoring yourself. Without self-monitoring, it is difficult to pitch correct for vocal.
Is there no way the master/stereo bus can record to a new track with the minute latency that creates being adjusted?
@frankpratte8358
Жыл бұрын
If I understand your question... Reaper has latency compensation and Kenny did a Reaper Mania video on that: kzread.info/dash/bejne/eo6Xurxym6iwkrw.html
@raycochrane3971
Жыл бұрын
@@frankpratte8358 close I think...Instead of creating the folder etc. etc. I'd like to "render" the mix to a single track within the project, solo that and do the vocal tracking with that as the backing with no phase issues due to the latency possibly caused by rendering into the track. Too hard? Too silly?
@frankpratte8358
Жыл бұрын
@@raycochrane3971 In the Render to file window the 5th button near the bottom is "Add rendered items to new tracks in project". I just tried it and there was no latency and no phase issues between the rendered track and the project, (I did it with just one track in the project so I could easily line up the "dots" as Kenny did in his video). As you wrote, this would be another way of accomplishing what Kenny did in his video. I'm not sure soloing the rendered track would turn off all the processing of the fx in the other tracks, maybe you would need to mute all the other tracks instead. Easy enough to do an experiment. Another note, when you rendered the project, any fx in the master channel would be printed on the rendered track. You wouldn't want that track to run back through those effects a second time. In the routing window of the rendered track turn off the Master send button and add an output in the Audio Hardware Outputs drop down window. Or, you could just turn off the fx in the master channel when playing the rendered track.
@raycochrane3971
Жыл бұрын
@@frankpratte8358 BRILLIANT - thank you. Reaper has a treasure trove of untried, unread, unknown facets for me. PHANQUE.
Okay so how do you bring up that preference meter?
Nice way to get around a slow USB interface.I think the easiest way is just to get a Fire wire or Thunderbolt interface.I got a Presonus 2626 it's really great at latency. Seriously very low latency. The higher I go in sample rate the lower the latency. It's like .7 round trip at 192 128 buffer. Could you script that trick you have? This info was not to scold anyone just to give honest feedback about Thunderbolt interface.
@brentharmonmusicproduction
Жыл бұрын
You still get latency with Thunderbolt
@electricwhiterabbit
Жыл бұрын
The latency on USB RME cards is lower than Thunderbolt. The issue isn't USB, the issue is the drivers. USB has plenty enough throughput for audio.
@midiman5045
Жыл бұрын
@@electricwhiterabbit no way try 192 / 128 you will not get .7 round trip. My old pro 40 was better at latency than USB.Yes that is .7 not 7. You are incorrect the issue with USB is the crc check sum that is transmitted with the audio signal. That is why FW was faster than USB because there was not over load on the data buss with other data. Please do you research. Yes in theory it should be faster but in reality that is another story.
@midiman5045
Жыл бұрын
@@brentharmonmusicproduction If you call..7 at 192 / 128 is latency I can live with it.
@electricwhiterabbit
Жыл бұрын
@@midiman5045 Huh? 192? Who records at that high of a sample rate?I record at 48. BTW, I did my research. Also Firewire is no more. It is USB or Thunderbolt unless you go into Dante or stuff like that which is more for pro studios. Check out the specs of RME USB interfaces. The latency is some of the best out there.
If this DAW has So many potentials Why Industry Producers or Engineers Don't use Reaper ??🙄
@djabthrash
11 ай бұрын
More and more are using Reaper (and other daws as well : logic, cubase/nuendo, studio one) while Pro Tools is slowly dying. And there are a LOT of Reaper users already.
My problem with computer software companies is this should be made a script provided by the DAW coders themselves.
I’ve been using reaper for a while now mixing, but now I’m recording, the latency is a big disappointment, I don’t have that latency issue in pro tools, I really don’t want to go back to pro tools, but these issues just aren’t there. Same equipment, like I said it’s very disappointing.
Hey Kenny, I'm getting withdrawal symptoms....new video please😂🎉