Reciprocasting Saw Restoration | Makita JR3070CT
Тәжірибелік нұсқаулар және стиль
Reciprocasting Saw Restoration Video
This is old project that I done last year, the video length is too long, viewers take time and get boring to understand this project. So I reedit it to save viewers time and understand it easily.
I hope you find something useful & enjoy this video!
I am happy to receive your feedbacks, advices, suggestions to improve myself.
!!! I apologize for the mistake if I have made in this restoration !!!
**I still keep some parts, I want to save the world's environment**
--------------Thank you so much for Likes & Comments--------------
Пікірлер: 180
I am amazed. Okay, I would disassemble and wash, but I would never put it back or put it back together and I would have a lot of extra spare parts))) Great job)) Respect from Russia)
Es un placer ver la forma como arreglar las herramientas de trabajo tanto inalambricas como con cableado.
Dang Makita is a brand that can be trusted ,Good restoration.👍
Just today I bought this very model. I tried several models in the shop and this one felt very solid and powerful, I liked it. It seems I made a right choise. :-) And, man, you did the impressive job on repairing this one! My respect.
The work deserves an excellent mark. It can be seen that the master knows this his work. Of course, it could have been a little better cleaned from rust and traces of time, but only for aesthetics. Everything that is needed for the device to work has been done. My respect.
Always a great show, thanks for sharing.
Отличная работа, молодец!!!
at 5:30 it shows the amazing number of parts that must have taken hours for each one , each piece to be made originally
@little_brat.
4 жыл бұрын
This is the moment I'm always waiting for the most! Apart from the final effect of course :)
Very nice restoration! Great results. Thanks for the vid!
Great restoration 👍. Every thing look old but armature look brand new.
Master of restoration. Good job. 10x for sharing.
I've had the same one in my garage for a while, it only worked half the time. You made me want to take care of it, and after removing only five screws I could understand that the problem was just the switch.. So I think not to stop there and finish its restoration ^^
thank you, you helped me a lot when disassembling the tip of the blade! thanks
Nhìn giàn đồ nghề là bít vietnam, cũng chuyên nghiệp phết
Круто ,это лучшая сетевая сабельная пила.👍
СПАСИБО ЗА ВИДЕО!!!
You did a great job on that saw!
Hi Gear Show 👋👋👋 good to see you 🤝🤝🤝 disassembly and assembly of the tool at the highest level👌🏽 awesome restoration 👍👍👍 so keep it ✌🏻🇷🇺
@gear_show
4 жыл бұрын
Hi Кошмар Кошмар 👋👋👋nice to see you again 🤝🤝🤝thank you so much 😊😊😊
You have done good job sir I am 15 years old and I also like this restoration work . I have all tools that you have please make these type of videos and guide me Thank you
@gear_show
4 жыл бұрын
You're welcome, I'm so happy to hear that :D
good and helpful. Thanks!
Always on top..👍
My favorite channel. Thanks for the video
So investing in Makita 👑 is the best at this time 👍
Internally it's in quite reasonable condition & it's a decently made device. Look for a basic parts washer, it really helps.
I wanted to thank you for this informative and well edited video. I bought a second hand JR3070 And it was in better condition than this one but far from its prime and your video helped me improve things a bit. I'm not exactly a handyman and not very skilled , but you're video was so easy to follow , with little room for doubt. I enjoyed how you filmed the same process from different angles , it really makes a difference. And , like they say " sharing is caring " and it's even more relevant with teaching skills ...
@gear_show
3 жыл бұрын
I'm glad this video helped you. Thanks for sharing your thoughts!
@carebear1488
3 жыл бұрын
@@gear_show trying to further do further maintenance on my saw , I'm stuck at the 2:39 part where you use magnet to disassemble it ... the gear seems stuck and no magnet I own seem to be strong enough . You seem to be able to remove it with ease. What am I missing ? thank you in advance for any answer ! :)
What a video.I loved it.Thoroughly professional.Keep it up.
@gear_show
4 жыл бұрын
Thank you so much!
Magnificent job I really liked it
Pěkný košile. ☺ a zase skvělá práce.
Excellent work on an excellent saw
Bhai bhot badiya
Anh giỏi quá.
Good to hear
awesome as always
Slt , sacré restauration de la scie sabre .👍
Fantastic work, very well done Sir! Greetings from Southport UK. 素晴らしい仕事、とてもよくできました、サー!サウスポートUKからのご挨拶。
Another awesome restoration greasy job
00:05 Now that's what I call a hardcore drill.
This Video for relaxing again stressfull day
Awesome
You made my day Mr!
Perfect
Holy crap, that thing has A LOT of parts.
I'd drink a San Miguel with this guy!
Very complicated and great restore
@gear_show
4 жыл бұрын
Yes, thanks
How do you get to remember where all the nuts, screws, bolts etc are meant to be? Amazing!!
Good job 👍
Cool. I wish I could do that.
Reciprocating saw: I am dead Gear show: no u r not *After somedays* HAPPY NEW LIFE
@hansolheo4914
4 жыл бұрын
Like the repairman of toystory series
@windowsxpprofessional
4 жыл бұрын
@@hansolheo4914 ya
It’s amazing that Makita still sells parts for it!!
@ampac
2 жыл бұрын
Well, this model is still being produced today and continues to be Makita's top of the range heavy-duty reciprocating saw. It is an impressive power tool.
Güzel çalışma olmuş emeğine sağlık kardeşim
Excellent working
Молодец 👍
những đồ dính dầu mỡ chỉ mang rửa nước xăng là nhanh rồi mang đi rửa xà bông là sạch
hi from turkey in istanbul...
@gear_show
4 жыл бұрын
Hi, nice to see you here!
@yasinkoraykocak
4 жыл бұрын
@@gear_show watching all his videos is very enjoyable. Thank you
@gear_show
4 жыл бұрын
@@yasinkoraykocak I'm so glad to hear that :D
Awesome job.
@gear_show
4 жыл бұрын
Thank you!
will a reciprocating saw tell me it loves me back? :'(
@gear_show
4 жыл бұрын
It will answer after you use it.
@djamelhamdia134
4 жыл бұрын
Hug it when it is on,you'll now.
أحسنت عملا
nice job
*Reciprocasting* 👏👏👏
Sweetheart and very nice video
Good Job Bro ...
nice work
It's actually an impressive job to be honest. But you didn't replace the broken bolt.
I really like your work. But I have a request , since I have seen you restore quite a few Bench Grinders, would you please do a Video on installing variable Speed Controller & a DPDT switch for forward and reverse on a Bench Grinder, Please?
very good job sir
Hi! I really enjoy your videos, but I always wonder what did you paint on the plastic cover? wax or lacquer varnish? Thanks
Perfect i like 100%
always great job like all time ☺️👍 I think you restored the same machine before really ? 🙏
Excellent video thank you very much, in the end why didn't it work? I have the same machine and the same thing happens to it, when you connect and hit the trigger it doesn't do anything, thank you very much
Woouw Master 💪👍🏻👍🏻👍🏻🇦🇱
Well done bud
@gear_show
4 жыл бұрын
Thank you!
Сложно, сложнааа!!! )
Respekt!!!!!👍👍👍
Great Job! I have one question: What do you spray the carcass with once you done washing it? Also what kind of soap do you use for washing the plastic parts? Thanks!
@ampac
2 жыл бұрын
Plastics and rubber can be revived and preserved using Silicon Oil / Lubricant. This is the spray that was likely used in this video. You can use warm water with dish washing or car washing liquid to clean most plastic parts. Degreasers can be too aggressive for some plastics.
5:25 Жёстко... Хардкор.
I love ur video so much brother, nice work 😘
@gear_show
3 жыл бұрын
Thank you so much Kim Meily 😘
@MeilyFoodie
3 жыл бұрын
Gear Show keep it up 👍😘
exelente
I thought it looked familiar!!🙂
E a tonalidade do azul dos martelo da Bosch por exemplo Gbh 5-40 dce
Деталей больше чем я думал но здесь есть функция подкачки и противовес как на лобзике . Апарат зверь я бы такой купил однозначно . Только не понял блок плавного пуска есть а включается сразу на полных оборотах .
@roberttiler2088
4 жыл бұрын
Продается. От 14 тыс в РФ
How do you get a saw into that state? I have the same one, it hasn’t been out there that long I believe...? Also a very tough tool. Respect for fixing it, 👍
@RaM-bk9fu
4 жыл бұрын
this guy live in japan, near Tohoku region which is was hit by the earthquake plus tsunami on March 2011, that is way lots of the tools on this channel before restoration looks like already submerged in water for some time,,,, and i believe he got the tool from recycling shop,,
I wish those cert clips did not always go under the bench on the other side of the shop when you remove them.
@E-hab
4 жыл бұрын
Just like springs
Waw❤️🌹
Do you use "Lithium" grease or "silicone" grease?
Boa noite a todos alguém sabe qual e a tonalidade do azul das máquina da Makita
It Is Like A Old Jigsaw
#2
@gear_show
4 жыл бұрын
Thank you!
omedetou gozaimasu !
Okay..good
Maybe i missed it but what was causing the issue for it not working?
Top
Wow
hadir bang☺☺☺☺
Where are you finding all those oem parts? I’m trying to find a gear to restore a makita hammer drill. It’s out of stock everywhere.
@gear_show
4 жыл бұрын
I order from Makita store in my city.
@user-bl5ej1cb4m
3 жыл бұрын
...
Please clean the Parts mit Petroleum. I like your work, I really enjoy watching your videos.
The downvotes are from people who only hate Makita brand.
@E-hab
4 жыл бұрын
Maybe Bosch owners 😂
@michaelfairchild
4 жыл бұрын
@@E-hab The 18V Green Line wondering why Teal Team is better.
👍
👏👏👏👍
Very complicated tool!
Где ты взял эти клауаааты?