For someone who's just starting out - this is excellent information without the 'BS' - thank you

Thanks for this informative video. The content of the video is very good. I am an Electrical Engineer from Pakistan.

Really good video mate, thanks for taking the time to make it. As someone who's only recently qualified as a domestic installer I like these videos as refreshers if there's a big gap between jobs.

@GSHElectrical

4 жыл бұрын

Thanks so much for watching and commenting. Gaz 👍

I can see that clearly in the on-site guide. Good example. Thanks💪🏼

Very helpful and explained everything in detail. Thanks a lot GSH. 👍👍👍

Love these videos. Thank you.

Glad I found this channel, very informative in a concise way. Subscribed look forward to more videos

@GSHElectrical

5 жыл бұрын

Hi and thanks for the support Gaz 👍

Great video Gaz, I prefer to croc onto the earthing conductor as in my strange little world, I think it provides a better contact point. It's good that you checked the functionality of the RCD test button 👍

Thank you for these videos you don't know how much your helping me . Many thanks

0:44 that must have been one hell of a fly that hit that door 🤣🤣

Very clear and straightforward. Thank you.

@GSHElectrical

2 жыл бұрын

Thanks 👍🏻

Amazing thanks GSH

Great video thank you for your help

thank u very much for the information

Another top of the drawer video.......I think you and photoinduction should do a blog together✌🏻️

On series 6 cut -outs there is a link bar within the neutral/earth chamber which for dno makes it adaptable for both tns or tncs earning arrangements. This can catch electricians out if no id sticker is at the service head. On occasions in the past a meter engineer may have fitted a second cut -out away from a communal set up into a flat for example . Using a series 6 cut-out ( which looks very similar to series 7 and 8 cut -out ) is very useful as it accommodates both earthing arrangements. It is however of little help to electricians who assume it is tncs as they both appear to be in the neutral chamber.

Excellent Thanks 👍

Excellent thank you

Great video, appart from the end, you didn't put the earth cable back in to its terminal & emphasis the special importants of doing so.

Good work

Great video

interesting information

Thanks sir

Great video , im not an electrician -it was interesting to see what you lads are actually doing and understand haha with out being bombarded with technical buzz words ( excuse the pun)

@GSHElectrical

5 жыл бұрын

Thanks for commenting and watching it’s very appreciated Gaz 👍

@Stop..carry-on

5 жыл бұрын

You make great videos , I’ve been also watching John ward to understand the different earthing systems ect /wiring - it helps to have an idea of what’s right and wrong - for eg an upside down door anyone can spot haha - but I noticed a copperpipe earthing clamp round the service cable on a job -which is obviously wrong . The original must of snapped off or something, But a couple years back I wouldn’t have known

I put on some eye protection any time that I make any type of contact with either a live conductor or heavy battery terminal.

Great video thank you. I wish I could get my head around why the neutral and earth on the installation side aren’t linked? To me it looks like they are shorted out? Thanks!

At 3:39 you did not explain the extra wires/components present. Are these 2 meters ? Can you do some videos where the wiring is confusing like this ? Thanks for really great video. It was really informative and the Ze test at the end was excellent.

Is the 16mm squared earth cable labeled at 1:03 the actual PME? The way I understand it is the PEN conductor enters this enclosure and is then split by the PME giving us a separate earth and neutral within the dweling. Or is the PME simply an extra additional connections to earth along the length of the PEN conductor in case of a cable breakage making it a crude TT system? This seems the case from your video, I may have been told the wrong information in the past.

When doing a pfc test at the consumer unit, main earth (16mm) will be put back in to the main earthing terminal and re tested with all parrellel earths connected for a true pfc? Not sure if I am correct. Look forward to hearing from your reply. Thanks

@GSHElectrical

6 жыл бұрын

Hi. That’s correct this is the link to me doing that test. kzread.info/dash/bejne/d2qosbmaaJnKd6g.html Thanks for commenting and watching GSH Electrical

Just to clarify... The line conductor which was the main incomer was live?? Dies the meter handle it when testing then? Also when I said out the Meter to impedance..is that not the same as ohms? Clear and concise lessons

@GSHElectrical

3 жыл бұрын

Live conductors are both the line and neutral... if 10 amps flows in the line then 10 amps will flow in the neutral hence both live conductors 👍.

Before you took off the cover why did you not throw the DP switch in the meter cupboard to isolate the consumer unit?

@GSHElectrical

5 жыл бұрын

Hi. In this video I didn’t enter the consumer unit I was just showing the layout of the earthing arrangement. Thanks for watching and commenting Gaz

How do you carry out the test on TT system

Pls what if ur earthing arrangements is TT system

When do we use this system and thank you

@GSHElectrical

Жыл бұрын

In most properties in the U.K. 👍🏻

I hope this video has been some help

@GSHElectrical

6 жыл бұрын

What a lovely catchphrase I might steal it 🙊