Rebuilding the Rear Brake Cylinder on a KX80

Автокөліктер мен көлік құралдары

Walk through of rebuilding the rear brake cylinder and bleeding the rear brake system on a KX80. I bought the rebuild kit on Motosport’s website.
Find the rebuild kit I used here: www.motosport....

Пікірлер: 6

  • @georgewallace8099
    @georgewallace80997 ай бұрын

    You skipped showing us wich way the piston O rings go on

  • @guicavalheiro5727
    @guicavalheiro5727 Жыл бұрын

    thanks for the video, I'm rebuilding my kx 80 and it helped a lot, keep going

  • @skipper6160

    @skipper6160

    Жыл бұрын

    Glad it helped!

  • @orlandoflores7720
    @orlandoflores7720 Жыл бұрын

    Question about the plastic elbow. Can that piece be turned in a different orientation or is it a fixed position within the master cylinder. I am working on a modification on my bike and need the hose to face in a different direction. The bike is a 2009 Yamaha FZ6R. Thanks!!

  • @skipper6160

    @skipper6160

    Жыл бұрын

    On this particular cylinder I believe you could rotate that elbow any direction you want although I wouldn’t recommend angling it too far downward as the reservoir may have a hard time getting the fluid to the cylinder. I am not familiar with that bike tho

  • @jezgejezea4448

    @jezgejezea4448

    6 ай бұрын

    I have the same problem, the elbow is sticking, can't turn it. Did you said youbuse penetrating oil? Which one?

Келесі