For the best snacks goto www.SnacksForMe.com

Thank you for this detailed instruction on repairing my leaking Mercedes SLK320 Front Lock.

Thank you for the awesome video. You wouldn't happen to have a video of the Bow extension cylinder anywhere :)

This was really helpful you saved me money, thanks a lot man and my 1994 320SL thanks you !

Thanks for the great video. I just got a 1991 R129 and a week later the tonneau cover stopped working and there was a bunch of hydraulic fluid on the ground behind driver side seat. I think I can do this(fingers crossed) Cheers, Dave

Cody, Thanks Very Much for the clear description and process......Can you please be more specific as to what size the O-Ring is ??? Going to try the repair but need direction as to where to buy it or what generic kit would have it etc...Asked a couple of o - ring online places with your description of 9mm x 9/16 or 9mm x 14mm and was told missing the hieght dimension...... Your a Life Saver...... Respectfully Deane

Great video

thanks for great video. more video R129 mercedes

Good job! Thank you for the video, where are the cylinders located on a 1999 SLK230? Thanks

Could you please tell me the exact size of those o-rings?

Where do you purchase the new poly (green piece)?

Hi, my top cylinder leak at the connect line to the cylinder. How can I fix this leak ?

Good video I have a 320 CLK 2001 I can't fine one video about the hydrolic shocks that push the roof up replace remove not a thing can you help thanks for that video I'm in the UK

I can open the roof on my vehicle perfectly but when I close the roof I have a small problem. It closes but the last part of the back glass doesn't close all the way. It leaves a 2 inch gap. I checked the hydraulic oil and there is no leak. I would appreciate any help.

Thank you.

what is the size of the wrench used to remove the cylinder from the latch and for the other cylinders? ty

Hi Cody, I've got a problem with my `95 A124 Mercedes, after replacing seals in the cylinders of the main hood lifters, the roof does not open. I had to let it replace, coz the left one was leaking badly (my mechanic replaced both sides just to be sure). The one that (un)locks the roof was replaced last year (received new seals too). Hydraulic fluid was topped up to maximum level (original one from MB). Now when I try to open the roof, the rear lock opens but the roof part where the glass window is lifts very very slow, and if finally rises so the front part can rise nothing happens. The button to open the roof blinks (I think even right from the moment on i pull it to open). Did you have such situation, do you know what the reason might be? Te engine runs when I operate the roof and I'm in P mode of course.

Where can I order these parts

@gregh7457

3 жыл бұрын

if you gotta ask where do you order o rings, you shouldn't be messing around with this stuff

Do you consider it a bad design?

Cody, do you have a video on how to remove them from the car?

@ruankoorts

6 жыл бұрын

kzread.info/dash/bejne/iHt1tKp6dZi9lZM.html

Buddy, can I help me and my son???

@porquemudamosparaorlandofr3016

Жыл бұрын

My son, 15 years old, bought your first car: a Mercedes cabriolet 1999…….I changed all solenoids o rings and too the seal an oring cylinder latch must…..but, the top no open…..i need put oil inside this cylinder when I changed the seal and oring or the pump make this?? Thanks my friend

@CodytheCarGuy

Жыл бұрын

@@porquemudamosparaorlandofr3016 check and make sure the pump is working.

@porquemudamosparaorlandofr3016

Жыл бұрын

@@CodytheCarGuy it is

@CodytheCarGuy

Жыл бұрын

@@porquemudamosparaorlandofr3016 try to get to a line and get a cup under it and make sure it is pumping.

Nice vids

“We’ve already got that on there” he says with subject item out of frame” hey I got no shit to talk I’m not the guy taking my time to put in the effort to help other people out with videos…but dangit that didn’t help much.